수동 스프레이건 시장 : 소재별, 유형별, 전원별, 최종사용자 산업별, 채널 유형별 - 세계 기회 분석과 산업 예측(2023-2032년)

According to a new report published by Allied Market Research, titled, "Manual Spray Guns Market," The manual spray guns market was valued at $1.8 billion in 2020, and is estimated to reach $2.6 billion by 2032, growing at a CAGR of 2.8% from 2023 to 2032.

Paints be applied with a brush, a roller, or a spray gun. However, manual spray guns are the fastest and most effective, finishing the job in a matter of seconds. In contrast to other media, paint spray guns employ a tiny amount of paint to cover a wide surface area, and the operator and the floor are not stained throughout the operation. In addition, paint spray guns allow contactless painting, which shields the paint surface from imperfections and ensures a high-quality finish. Smaller spaces or difficult corners are easier to paint with a manual spray pistol than with a brush. Spray paint guns are adaptable; hence, they are used on every kind of surface. A great degree of controllability is provided by the systems that allow air pressure, fluid flow, and fan size to be adjusted in paint spray guns. In addition, spraying prevents runs, drips, sags, and trapped air bubbles while providing a high-quality and consistent paint layer. During the projection period, manual spray guns are expected to expand in popularity due to their extremely desirable characteristics.

Moreover, manual spray gun sprays or mists paint at high or low pressure. To atomize the paint, an outside power source is required. The spray gun's engine or an external cylinder of compressed gas are often the sources of this power. The need for power frequently prevents the usage of sprayers as it is difficult and expensive to obtain and own. In addition, as brushes and rollers are readily available and inexpensive, and do not require an external power source, the usage of manual spray guns is limited.

On the contrary, innovation is essential to growth and helps businesses in maintaining their competitiveness. A number of paint spray gun producers are innovating to broaden their product offerings. Since paint spray guns are mostly hefty and easily put strain on the hands of the user, 3M developed a high-performance spray gun that is up to 50% lighter than the other spray guns. It is advertised as being the lightest in its market segment globally. Wagner also introduced the FlexiO 890 paint sprayer in March 2022, which is used to impart a better finish to cabinets, walls, and ceilings. The new sprayer is designed for increased comfort and convenience and is composed of impact-resistant, stainless steel-reinforced composite metal. In addition, Graco Inc. sells paint sprayers with built-in microprocessors. This makes it possible to easily control the machine and, to some extent, automate its operation. The manual spray guns are expected to continue to advance and offer attractive prospects during the forecast period.

The manual spray gun market is segmented into type, material, power source, sales channel, and end-user industry. The type in the study includes, airless spray guns, air spray guns, HVLP, and LVLP. HVLP segment dominated the market in 2020. By one material, the market is divided into paint and coating. On the basis of coating types, the market is segmented into plaster, fire protection and others. Fire protection segment dominated the market in 2020. By power source, it is divided into pneumatic, electric, and gas powered. pneumatic segment dominated the market in 2020. By end-user industry, it is segmented into construction, manufacturing, marine, automotive, woodworking, steel, and others. Automotive segment dominated the market in 2020. By channel types, it is segregated into distributor, DIY and professionals. Dealers/distributors segment dominated the market in 2020.

Region wise, the market is analyzed across North America (the U.S., Canada, and Mexico), Europe (Germany, the UK, France, Italy, and rest of Europe), Asia-Pacific (China, India, Japan, South Korea, and rest of Asia-Pacific), and LAMEA (Latin America, Middle East, and Africa).

In 2020, Asia-Pacific was the key shareholder, and is anticipated to secure a leading position during the forecast period.

COMPETITION ANALYSIS

Key companies profiled in the manual spray gun market report include 3M Company, ANEST IWATA CORPORATION, Graco, Inc., SATA GmbH & Co, Wagner Spray Tech Corporation, Fuso Seiki Co., Ltd., Exel Industries SA, Tritech Industries, Inc., Prowin Tools Company Ltd., and Rongpeng Air Tools Co., Ltd

KEY BENEFITS FOR STAKEHOLDERS

• The report provides an extensive analysis of the current trends, future estimations, and dynamics of the manual spray gun market.
• In-depth market analysis is conducted by constructing market estimations for the key market segments between 2022 and 2032.
• Extensive analysis of the manual spray gun market is conducted by following key product positioning and monitoring of the top competitors within the market framework.
• A comprehensive analysis of all regions is provided to determine the prevailing opportunities.
• The key market players within the manual spray gun market are profiled in this report and their strategies are analyzed thoroughly, to understand the competitive outlook of the manual spray gun industry.

Additional benefits you will get with this purchase are:

• Quarterly Update and* (only available with a corporate license, on listed price)
• 5 additional Company Profile of client Choice pre- or Post-purchase, as a free update.
• Free Upcoming Version on the Purchase of Five and Enterprise User License.
• 16 analyst hours of support* (post-purchase, if you find additional data requirements upon review of the report, you may receive support amounting to 16 analyst hours to solve questions, and post-sale queries)
• 15% Free Customization* (in case the scope or segment of the report does not match your requirements, 20% is equivalent to 3 working days of free work, applicable once)
• Free data Pack on the Five and Enterprise User License. (Excel version of the report)
• Free Updated report if the report is 6-12 months old or older.
• 24-hour priority response*
• Free Industry updates and white papers.

Possible Customization with this report (with additional cost and timeline talk to the sales executive to know more)

• Manufacturing Capacity
• Go To Market Strategy
• Pain Point Analysis
• Additional company profiles with specific to client's interest
• Additional country or region analysis- market size and forecast
• Average Selling Price Analysis / Price Point Analysis
• Brands Share Analysis
• Criss-cross segment analysis- market size and forecast
• Expanded list for Company Profiles
• Historic market data
• Import Export Analysis/Data
• Key player details (including location, contact details, supplier/vendor network etc. in excel format)
• List of customers/consumers/raw material suppliers- value chain analysis
• Market share analysis of players at global/region/country level
• Per Capita Consumption Trends
• Product Consumption Analysis
• Reimbursement Scenario
• SWOT Analysis
• Volume Market Size and Forecast

Key Market Segments

By Channel Type

• Dealers/Distributors
• Professions
• DIY

By Material

• Paint
• Coatings
  • Coating Type
  • Plaster
  • Fire Protection
  • Others

By Type

• Airless Spray Guns
• Air Spray Guns-HVLP
• Air Spray Guns-LVLP

By Power Source

• Pneumatic
• Electric
• Gas-powered

By End-user Industry

• Automotive
• Woodworking
• Construction
• Manufacturing
• Marine
• Steel
• Other

By Region

• North America
  • U.S.
  • Canada
  • Mexico
• Europe
  • Germany
  • France
  • Spain
  • UK
  • Rest of Europe
• Asia-Pacific
  • Japan
  • China
  • India
  • South Korea
  • Thailand
  • Malaysia
  • Indonesia
  • Rest of Asia-Pacific
• LAMEA
  • Brazil
  • South Africa
  • Saudi Arabia
  • UAE
  • Rest of LAMEA

Key Market Players:

• Wagner Spray Tech Corporation
• SATA GmbH and Co. KG
• Fuso Seiki Co., Ltd.
• Rongpeng Air Tools Co., Ltd.
• Exel Industries SA
• Prowin Tools Company Ltd.
• Tritech Industries, Inc.
• 3M Company
• Graco, Inc.
• ANEST IWATA CORPORATION

TABLE OF CONTENTS

CHAPTER 1: INTRODUCTION

• 1.1. Report description
• 1.2. Key market segments
• 1.3. Key benefits to the stakeholders
• 1.4. Research Methodology
  • 1.4.1. Primary research
  • 1.4.2. Secondary research
  • 1.4.3. Analyst tools and models

CHAPTER 2: EXECUTIVE SUMMARY

• 2.1. CXO Perspective

CHAPTER 3: MARKET OVERVIEW

• 3.1. Market definition and scope
• 3.2. Key findings
  • 3.2.1. Top impacting factors
  • 3.2.2. Top investment pockets
• 3.3. Porter's five forces analysis
  • 3.3.1. Low bargaining power of suppliers
  • 3.3.2. Low threat of new entrants
  • 3.3.3. Low threat of substitutes
  • 3.3.4. Low intensity of rivalry
  • 3.3.5. Low bargaining power of buyers
• 3.4. Market dynamics
  • 3.4.1. Drivers
    • 3.4.1.1. Growth of automotive industry
    • 3.4.1.2. Growth of furniture Industry
    • 3.4.1.3. Advantages of manual spray guns
    • 3.4.1.4. Cost effectiveness
  • 3.4.2. Restraints
    • 3.4.2.1. Requirement of external power source
    • 3.4.2.2. Requirement of maintenance
    • 3.4.2.3. Impact on accuracy
  • 3.4.3. Opportunities
    • 3.4.3.1. Advancements in paint spray guns
    • 3.4.3.2. Growing aerospace industry

CHAPTER 4: MANUAL SPRAY GUNS MARKET, BY MATERIAL

• 4.1. Overview
  • 4.1.1. Market size and forecast
• 4.2. Paint
  • 4.2.1. Key market trends, growth factors and opportunities
  • 4.2.2. Market size and forecast, by region
  • 4.2.3. Market share analysis by country
• 4.3. Coatings
  • 4.3.1. Key market trends, growth factors and opportunities
  • 4.3.2. Market size and forecast, by region
  • 4.3.3. Market share analysis by country
  • 4.3.4. Coatings Manual Spray Guns Market by Coating Type
    • 4.3.4.1. Plaster Market size and forecast, by region
    • 4.3.4.2. Plaster Market size and forecast, by country
    • 4.3.4.3. Fire Protection Market size and forecast, by region
    • 4.3.4.4. Fire Protection Market size and forecast, by country
    • 4.3.4.5. Others Market size and forecast, by region
    • 4.3.4.6. Others Market size and forecast, by country

CHAPTER 5: MANUAL SPRAY GUNS MARKET, BY TYPE

• 5.1. Overview
  • 5.1.1. Market size and forecast
• 5.2. Airless Spray Guns
  • 5.2.1. Key market trends, growth factors and opportunities
  • 5.2.2. Market size and forecast, by region
  • 5.2.3. Market share analysis by country
• 5.3. Air Spray Guns-HVLP
  • 5.3.1. Key market trends, growth factors and opportunities
  • 5.3.2. Market size and forecast, by region
  • 5.3.3. Market share analysis by country
• 5.4. Air Spray Guns-LVLP
  • 5.4.1. Key market trends, growth factors and opportunities
  • 5.4.2. Market size and forecast, by region
  • 5.4.3. Market share analysis by country

CHAPTER 6: MANUAL SPRAY GUNS MARKET, BY POWER SOURCE

• 6.1. Overview
  • 6.1.1. Market size and forecast
• 6.2. Pneumatic
  • 6.2.1. Key market trends, growth factors and opportunities
  • 6.2.2. Market size and forecast, by region
  • 6.2.3. Market share analysis by country
• 6.3. Electric
  • 6.3.1. Key market trends, growth factors and opportunities
  • 6.3.2. Market size and forecast, by region
  • 6.3.3. Market share analysis by country
• 6.4. Gas-powered
  • 6.4.1. Key market trends, growth factors and opportunities
  • 6.4.2. Market size and forecast, by region
  • 6.4.3. Market share analysis by country

CHAPTER 7: MANUAL SPRAY GUNS MARKET, BY END-USER INDUSTRY

• 7.1. Overview
  • 7.1.1. Market size and forecast
• 7.2. Automotive
  • 7.2.1. Key market trends, growth factors and opportunities
  • 7.2.2. Market size and forecast, by region
  • 7.2.3. Market share analysis by country
• 7.3. Woodworking
  • 7.3.1. Key market trends, growth factors and opportunities
  • 7.3.2. Market size and forecast, by region
  • 7.3.3. Market share analysis by country
• 7.4. Construction
  • 7.4.1. Key market trends, growth factors and opportunities
  • 7.4.2. Market size and forecast, by region
  • 7.4.3. Market share analysis by country
• 7.5. Manufacturing
  • 7.5.1. Key market trends, growth factors and opportunities
  • 7.5.2. Market size and forecast, by region
  • 7.5.3. Market share analysis by country
• 7.6. Marine
  • 7.6.1. Key market trends, growth factors and opportunities
  • 7.6.2. Market size and forecast, by region
  • 7.6.3. Market share analysis by country
• 7.7. Steel
  • 7.7.1. Key market trends, growth factors and opportunities
  • 7.7.2. Market size and forecast, by region
  • 7.7.3. Market share analysis by country
• 7.8. Other
  • 7.8.1. Key market trends, growth factors and opportunities
  • 7.8.2. Market size and forecast, by region
  • 7.8.3. Market share analysis by country

CHAPTER 8: MANUAL SPRAY GUNS MARKET, BY CHANNEL TYPE

• 8.1. Overview
  • 8.1.1. Market size and forecast
• 8.2. Dealers/Distributors
  • 8.2.1. Key market trends, growth factors and opportunities
  • 8.2.2. Market size and forecast, by region
  • 8.2.3. Market share analysis by country
• 8.3. Professions
  • 8.3.1. Key market trends, growth factors and opportunities
  • 8.3.2. Market size and forecast, by region
  • 8.3.3. Market share analysis by country
• 8.4. DIY
  • 8.4.1. Key market trends, growth factors and opportunities
  • 8.4.2. Market size and forecast, by region
  • 8.4.3. Market share analysis by country

CHAPTER 9: MANUAL SPRAY GUNS MARKET, BY REGION

• 9.1. Overview
  • 9.1.1. Market size and forecast By Region
• 9.2. North America
  • 9.2.1. Key market trends, growth factors and opportunities
  • 9.2.2. Market size and forecast, by Material
    • 9.2.2.1. North America Coatings Manual Spray Guns Market by Coating Type
  • 9.2.3. Market size and forecast, by Type
  • 9.2.4. Market size and forecast, by Power Source
  • 9.2.5. Market size and forecast, by End-user Industry
  • 9.2.6. Market size and forecast, by Channel Type
  • 9.2.7. Market size and forecast, by country
    • 9.2.7.1. U.S.
    • 9.2.7.1.1. Market size and forecast, by Material
    • 9.2.7.1.1.1. U.S. Coatings Manual Spray Guns Market by Coating Type
    • 9.2.7.1.2. Market size and forecast, by Type
    • 9.2.7.1.3. Market size and forecast, by Power Source
    • 9.2.7.1.4. Market size and forecast, by End-user Industry
    • 9.2.7.1.5. Market size and forecast, by Channel Type
    • 9.2.7.2. Canada
    • 9.2.7.2.1. Market size and forecast, by Material
    • 9.2.7.2.1.1. Canada Coatings Manual Spray Guns Market by Coating Type
    • 9.2.7.2.2. Market size and forecast, by Type
    • 9.2.7.2.3. Market size and forecast, by Power Source
    • 9.2.7.2.4. Market size and forecast, by End-user Industry
    • 9.2.7.2.5. Market size and forecast, by Channel Type
    • 9.2.7.3. Mexico
    • 9.2.7.3.1. Market size and forecast, by Material
    • 9.2.7.3.1.1. Mexico Coatings Manual Spray Guns Market by Coating Type
    • 9.2.7.3.2. Market size and forecast, by Type
    • 9.2.7.3.3. Market size and forecast, by Power Source
    • 9.2.7.3.4. Market size and forecast, by End-user Industry
    • 9.2.7.3.5. Market size and forecast, by Channel Type
• 9.3. Europe
  • 9.3.1. Key market trends, growth factors and opportunities
  • 9.3.2. Market size and forecast, by Material
    • 9.3.2.1. Europe Coatings Manual Spray Guns Market by Coating Type
  • 9.3.3. Market size and forecast, by Type
  • 9.3.4. Market size and forecast, by Power Source
  • 9.3.5. Market size and forecast, by End-user Industry
  • 9.3.6. Market size and forecast, by Channel Type
  • 9.3.7. Market size and forecast, by country
    • 9.3.7.1. Germany
    • 9.3.7.1.1. Market size and forecast, by Material
    • 9.3.7.1.1.1. Germany Coatings Manual Spray Guns Market by Coating Type
    • 9.3.7.1.2. Market size and forecast, by Type
    • 9.3.7.1.3. Market size and forecast, by Power Source
    • 9.3.7.1.4. Market size and forecast, by End-user Industry
    • 9.3.7.1.5. Market size and forecast, by Channel Type
    • 9.3.7.2. France
    • 9.3.7.2.1. Market size and forecast, by Material
    • 9.3.7.2.1.1. France Coatings Manual Spray Guns Market by Coating Type
    • 9.3.7.2.2. Market size and forecast, by Type
    • 9.3.7.2.3. Market size and forecast, by Power Source
    • 9.3.7.2.4. Market size and forecast, by End-user Industry
    • 9.3.7.2.5. Market size and forecast, by Channel Type
    • 9.3.7.3. Spain
    • 9.3.7.3.1. Market size and forecast, by Material
    • 9.3.7.3.1.1. Spain Coatings Manual Spray Guns Market by Coating Type
    • 9.3.7.3.2. Market size and forecast, by Type
    • 9.3.7.3.3. Market size and forecast, by Power Source
    • 9.3.7.3.4. Market size and forecast, by End-user Industry
    • 9.3.7.3.5. Market size and forecast, by Channel Type
    • 9.3.7.4. UK
    • 9.3.7.4.1. Market size and forecast, by Material
    • 9.3.7.4.1.1. UK Coatings Manual Spray Guns Market by Coating Type
    • 9.3.7.4.2. Market size and forecast, by Type
    • 9.3.7.4.3. Market size and forecast, by Power Source
    • 9.3.7.4.4. Market size and forecast, by End-user Industry
    • 9.3.7.4.5. Market size and forecast, by Channel Type
    • 9.3.7.5. Rest of Europe
    • 9.3.7.5.1. Market size and forecast, by Material
    • 9.3.7.5.1.1. Rest of Europe Coatings Manual Spray Guns Market by Coating Type
    • 9.3.7.5.2. Market size and forecast, by Type
    • 9.3.7.5.3. Market size and forecast, by Power Source
    • 9.3.7.5.4. Market size and forecast, by End-user Industry
    • 9.3.7.5.5. Market size and forecast, by Channel Type
• 9.4. Asia-Pacific
  • 9.4.1. Key market trends, growth factors and opportunities
  • 9.4.2. Market size and forecast, by Material
    • 9.4.2.1. Asia-Pacific Coatings Manual Spray Guns Market by Coating Type
  • 9.4.3. Market size and forecast, by Type
  • 9.4.4. Market size and forecast, by Power Source
  • 9.4.5. Market size and forecast, by End-user Industry
  • 9.4.6. Market size and forecast, by Channel Type
  • 9.4.7. Market size and forecast, by country
    • 9.4.7.1. Japan
    • 9.4.7.1.1. Market size and forecast, by Material
    • 9.4.7.1.1.1. Japan Coatings Manual Spray Guns Market by Coating Type
    • 9.4.7.1.2. Market size and forecast, by Type
    • 9.4.7.1.3. Market size and forecast, by Power Source
    • 9.4.7.1.4. Market size and forecast, by End-user Industry
    • 9.4.7.1.5. Market size and forecast, by Channel Type
    • 9.4.7.2. China
    • 9.4.7.2.1. Market size and forecast, by Material
    • 9.4.7.2.1.1. China Coatings Manual Spray Guns Market by Coating Type
    • 9.4.7.2.2. Market size and forecast, by Type
    • 9.4.7.2.3. Market size and forecast, by Power Source
    • 9.4.7.2.4. Market size and forecast, by End-user Industry
    • 9.4.7.2.5. Market size and forecast, by Channel Type
    • 9.4.7.3. India
    • 9.4.7.3.1. Market size and forecast, by Material
    • 9.4.7.3.1.1. India Coatings Manual Spray Guns Market by Coating Type
    • 9.4.7.3.2. Market size and forecast, by Type
    • 9.4.7.3.3. Market size and forecast, by Power Source
    • 9.4.7.3.4. Market size and forecast, by End-user Industry
    • 9.4.7.3.5. Market size and forecast, by Channel Type
    • 9.4.7.4. South Korea
    • 9.4.7.4.1. Market size and forecast, by Material
    • 9.4.7.4.1.1. South Korea Coatings Manual Spray Guns Market by Coating Type
    • 9.4.7.4.2. Market size and forecast, by Type
    • 9.4.7.4.3. Market size and forecast, by Power Source
    • 9.4.7.4.4. Market size and forecast, by End-user Industry
    • 9.4.7.4.5. Market size and forecast, by Channel Type
    • 9.4.7.5. Thailand
    • 9.4.7.5.1. Market size and forecast, by Material
    • 9.4.7.5.1.1. Thailand Coatings Manual Spray Guns Market by Coating Type
    • 9.4.7.5.2. Market size and forecast, by Type
    • 9.4.7.5.3. Market size and forecast, by Power Source
    • 9.4.7.5.4. Market size and forecast, by End-user Industry
    • 9.4.7.5.5. Market size and forecast, by Channel Type
    • 9.4.7.6. Malaysia
    • 9.4.7.6.1. Market size and forecast, by Material
    • 9.4.7.6.1.1. Malaysia Coatings Manual Spray Guns Market by Coating Type
    • 9.4.7.6.2. Market size and forecast, by Type
    • 9.4.7.6.3. Market size and forecast, by Power Source
    • 9.4.7.6.4. Market size and forecast, by End-user Industry
    • 9.4.7.6.5. Market size and forecast, by Channel Type
    • 9.4.7.7. Indonesia
    • 9.4.7.7.1. Market size and forecast, by Material
    • 9.4.7.7.1.1. Indonesia Coatings Manual Spray Guns Market by Coating Type
    • 9.4.7.7.2. Market size and forecast, by Type
    • 9.4.7.7.3. Market size and forecast, by Power Source
    • 9.4.7.7.4. Market size and forecast, by End-user Industry
    • 9.4.7.7.5. Market size and forecast, by Channel Type
    • 9.4.7.8. Rest of Asia-Pacific
    • 9.4.7.8.1. Market size and forecast, by Material
    • 9.4.7.8.1.1. Rest of Asia-Pacific Coatings Manual Spray Guns Market by Coating Type
    • 9.4.7.8.2. Market size and forecast, by Type
    • 9.4.7.8.3. Market size and forecast, by Power Source
    • 9.4.7.8.4. Market size and forecast, by End-user Industry
    • 9.4.7.8.5. Market size and forecast, by Channel Type
• 9.5. LAMEA
  • 9.5.1. Key market trends, growth factors and opportunities
  • 9.5.2. Market size and forecast, by Material
    • 9.5.2.1. LAMEA Coatings Manual Spray Guns Market by Coating Type
  • 9.5.3. Market size and forecast, by Type
  • 9.5.4. Market size and forecast, by Power Source
  • 9.5.5. Market size and forecast, by End-user Industry
  • 9.5.6. Market size and forecast, by Channel Type
  • 9.5.7. Market size and forecast, by country
    • 9.5.7.1. Brazil
    • 9.5.7.1.1. Market size and forecast, by Material
    • 9.5.7.1.1.1. Brazil Coatings Manual Spray Guns Market by Coating Type
    • 9.5.7.1.2. Market size and forecast, by Type
    • 9.5.7.1.3. Market size and forecast, by Power Source
    • 9.5.7.1.4. Market size and forecast, by End-user Industry
    • 9.5.7.1.5. Market size and forecast, by Channel Type
    • 9.5.7.2. South Africa
    • 9.5.7.2.1. Market size and forecast, by Material
    • 9.5.7.2.1.1. South Africa Coatings Manual Spray Guns Market by Coating Type
    • 9.5.7.2.2. Market size and forecast, by Type
    • 9.5.7.2.3. Market size and forecast, by Power Source
    • 9.5.7.2.4. Market size and forecast, by End-user Industry
    • 9.5.7.2.5. Market size and forecast, by Channel Type
    • 9.5.7.3. Saudi Arabia
    • 9.5.7.3.1. Market size and forecast, by Material
    • 9.5.7.3.1.1. Saudi Arabia Coatings Manual Spray Guns Market by Coating Type
    • 9.5.7.3.2. Market size and forecast, by Type
    • 9.5.7.3.3. Market size and forecast, by Power Source
    • 9.5.7.3.4. Market size and forecast, by End-user Industry
    • 9.5.7.3.5. Market size and forecast, by Channel Type
    • 9.5.7.4. UAE
    • 9.5.7.4.1. Market size and forecast, by Material
    • 9.5.7.4.1.1. UAE Coatings Manual Spray Guns Market by Coating Type
    • 9.5.7.4.2. Market size and forecast, by Type
    • 9.5.7.4.3. Market size and forecast, by Power Source
    • 9.5.7.4.4. Market size and forecast, by End-user Industry
    • 9.5.7.4.5. Market size and forecast, by Channel Type
    • 9.5.7.5. Rest of LAMEA
    • 9.5.7.5.1. Market size and forecast, by Material
    • 9.5.7.5.1.1. Rest of LAMEA Coatings Manual Spray Guns Market by Coating Type
    • 9.5.7.5.2. Market size and forecast, by Type
    • 9.5.7.5.3. Market size and forecast, by Power Source
    • 9.5.7.5.4. Market size and forecast, by End-user Industry
    • 9.5.7.5.5. Market size and forecast, by Channel Type

CHAPTER 10: COMPETITIVE LANDSCAPE

• 10.1. Introduction
• 10.2. Top winning strategies
• 10.3. Product Mapping of Top 10 Player
• 10.4. Competitive Dashboard
• 10.5. Competitive Heatmap
• 10.6. Top player positioning, 2020

CHAPTER 11: COMPANY PROFILES

• 11.1. 3M Company
  • 11.1.1. Company overview
  • 11.1.2. Key Executives
  • 11.1.3. Company snapshot
  • 11.1.4. Operating business segments
  • 11.1.5. Product portfolio
  • 11.1.6. Business performance
  • 11.1.7. Key strategic moves and developments
• 11.2. ANEST IWATA CORPORATION
  • 11.2.1. Company overview
  • 11.2.2. Key Executives
  • 11.2.3. Company snapshot
  • 11.2.4. Operating business segments
  • 11.2.5. Product portfolio
  • 11.2.6. Business performance
• 11.3. Graco, Inc.
  • 11.3.1. Company overview
  • 11.3.2. Key Executives
  • 11.3.3. Company snapshot
  • 11.3.4. Operating business segments
  • 11.3.5. Product portfolio
  • 11.3.6. Business performance
  • 11.3.7. Key strategic moves and developments
• 11.4. SATA GmbH and Co. KG
  • 11.4.1. Company overview
  • 11.4.2. Key Executives
  • 11.4.3. Company snapshot
  • 11.4.4. Operating business segments
  • 11.4.5. Product portfolio
• 11.5. Wagner Spray Tech Corporation
  • 11.5.1. Company overview
  • 11.5.2. Key Executives
  • 11.5.3. Company snapshot
  • 11.5.4. Operating business segments
  • 11.5.5. Product portfolio
• 11.6. Fuso Seiki Co., Ltd.
  • 11.6.1. Company overview
  • 11.6.2. Key Executives
  • 11.6.3. Company snapshot
  • 11.6.4. Operating business segments
  • 11.6.5. Product portfolio
• 11.7. Exel Industries SA
  • 11.7.1. Company overview
  • 11.7.2. Key Executives
  • 11.7.3. Company snapshot
  • 11.7.4. Operating business segments
  • 11.7.5. Product portfolio
  • 11.7.6. Business performance
  • 11.7.7. Key strategic moves and developments
• 11.8. Tritech Industries, Inc.
  • 11.8.1. Company overview
  • 11.8.2. Key Executives
  • 11.8.3. Company snapshot
  • 11.8.4. Operating business segments
  • 11.8.5. Product portfolio
• 11.9. Prowin Tools Company Ltd.
  • 11.9.1. Company overview
  • 11.9.2. Key Executives
  • 11.9.3. Company snapshot
  • 11.9.4. Operating business segments
  • 11.9.5. Product portfolio
• 11.10. Rongpeng Air Tools Co., Ltd.
  • 11.10.1. Company overview
  • 11.10.2. Key Executives
  • 11.10.3. Company snapshot
  • 11.10.4. Operating business segments
  • 11.10.5. Product portfolio