세계의 직접환원철 시장 규모 조사 및 예측 : 형태별, 생산 공정별, 용도별, 지역별 분석(2023-2030년)

Global Direct Reduced Iron Market is valued at approximately USD 32.48 billion in 2022 and is anticipated to grow with a healthy growth rate of more than 9.0% over the forecast period 2023-2030. Direct Reduced Iron (DRI) is a form of iron created from iron ore via a reduction process, commonly referred to as sponge iron. DRI is created by compressing the oxygen out of iron ore without melting, in contrast to conventional techniques of producing iron that require a blast furnace. The reduction process takes place at a lower temperature, usually below the iron melting point. The growing production of natural gas, the imposition of various environmental regulations, surging demand for high-quality DRI, coupled with the increased use of DRI in new applications are the most prominent factors that are fostering market growth across the globe.

Additionally, the growing steel production is exhibiting a positive influence on the growth of the directly reduced iron market. DRI is a major input in steel production. As the global demand for steel continues to rise, the demand for DRI also increases. DRI is preferred by steel manufacturers due to its high iron content, low impurities, and cost-effectiveness compared to traditional iron ore. According to Statista, in 2021, crude steel production accounted for 1958.45 million metric tons around the world, which is a rise from 1881.37 million metric tons in 2020. The growth of the construction, automotive, and infrastructure sectors, particularly in emerging economies, fuels the demand for steel, thereby driving the DRI market. Thus, these aforementioned factors are propelling the growth of the direct reduced iron market during the estimated period. Moreover, the advancements in direct reduction technology, as well as the increasing number of government regulations present various lucrative opportunities over the forecasting years. However, the availability of alternative iron sources and the high capital required for establishing a DRI plant are hampering the market growth throughout the forecast period of 2023-2030.

The key regions considered for the Global Direct Reduced Iron Market study include: Asia Pacific, North America, Europe, Latin America, and Middle East & Africa. Asia Pacific dominated the market in 2022 owing to the rising product demand from numerous applications such as steel production and construction, as well as the rapid growth of the residential building sector. Whereas, Asia Pacific is expected as a fastest growing region CAGR over the forecast years. The growing steel industry, increased production of passenger and light commercial vehicles, along with the rising demand for high-quality DRI are significantly propelling the market demand across the region.

Major market players included in this report are:

• Qatar Steel (Qatar)
• Kobe Steel Ltd (Japan)
• ArcelorMittal (Luxembourg)
• NUCOR Corporation (U.S.)
• Midrex Technologies Inc. (U.S.)
• Khouzestan Steel Company (Khuzestan)
• Welspun Group (India)
• Jindal Shadeed Iron & Steel LLC (Oman)
• AM/NS India
• Tosyali Algeria A.S. (Algeria)

Recent Developments in the Market:

• In March 2022, ArcelorMittal announced that the company intended to invest USD 292 million with the objective of building a new manufacturing facility for electrical steels at the Mardyck plant in northern France. In addition to ArcelorMittal's current electrical steel mill, the facility specializes in creating electrical steels for the engines of electric cars. The new industrial facility is likely to boost the French electromobility industry and have a 200-kiloton manufacturing capacity.

Global Direct Reduced Iron Market Report Scope:

• Historical Data: 2020 - 2021
• Base Year for Estimation: 2022
• Forecast period: 2023-2030
• Report Coverage: Revenue forecast, Company Ranking, Competitive Landscape, Growth factors, and Trends
• Segments Covered: Form, Production Process, Application, Region
• Regional Scope: North America; Europe; Asia Pacific; Latin America; Middle East & Africa
• Customization Scope: Free report customization (equivalent up to 8 analyst's working hours) with purchase. Addition or alteration to country, regional & segment scope*

The objective of the study is to define market sizes of different segments & countries in recent years and to forecast the values to the coming years. The report is designed to incorporate both qualitative and quantitative aspects of the industry within countries involved in the study.

The report also caters detailed information about the crucial aspects such as driving factors & challenges which will define the future growth of the market. Additionally, it also incorporates potential opportunities in micro markets for stakeholders to invest along with the detailed analysis of competitive landscape and product offerings of key players. The detailed segments and sub-segment of the market are explained below:

By Form:

• Pellets
• Others

By Production Process:

• Gas-based
• Coal-based

By Application:

• Steel Production
• Construction
• Others

By Region:

• North America
• U.S.
• Canada

• Europe
• UK
• Germany
• France
• Spain
• Italy
• ROE

• Asia Pacific
• China
• India
• Japan
• Australia
• South Korea
• RoAPAC

• Latin America
• Brazil
• Mexico

• Middle East & Africa
• Saudi Arabia
• South Africa
• Rest of Middle East & Africa

Table of Contents

Chapter 1. Executive Summary

• 1.1. Market Snapshot
• 1.2. Global & Segmental Market Estimates & Forecasts, 2020-2030 (USD Billion)
  • 1.2.1. Direct Reduced Iron Market, by Region, 2020-2030 (USD Billion)
  • 1.2.2. Direct Reduced Iron Market, by Form, 2020-2030 (USD Billion)
  • 1.2.3. Direct Reduced Iron Market, by Production Process, 2020-2030 (USD Billion)
  • 1.2.4. Direct Reduced Iron Market, by Application, 2020-2030 (USD Billion)
• 1.3. Key Trends
• 1.4. Estimation Methodology
• 1.5. Research Assumption

Chapter 2. Global Direct Reduced Iron Market Definition and Scope

• 2.1. Objective of the Study
• 2.2. Market Definition & Scope
  • 2.2.1. Industry Evolution
  • 2.2.2. Scope of the Study
• 2.3. Years Considered for the Study
• 2.4. Currency Conversion Rates

Chapter 3. Global Direct Reduced Iron Market Dynamics

• 3.1. Direct Reduced Iron Market Impact Analysis (2020-2030)
  • 3.1.1. Market Drivers
    • 3.1.1.1. Increasing use of DRI in new applications
    • 3.1.1.2. Growing steel production
  • 3.1.2. Market Challenges
    • 3.1.2.1. Availability of alternative iron sources
    • 3.1.2.2. High capital required for establishing a DRI plant
  • 3.1.3. Market Opportunities
    • 3.1.3.1. Advancements in direct reduction technology
    • 3.1.3.2. Increasing number of government regulations

Chapter 4. Global Direct Reduced Iron Market Industry Analysis

• 4.1. Porter's 5 Force Model
  • 4.1.1. Bargaining Power of Suppliers
  • 4.1.2. Bargaining Power of Buyers
  • 4.1.3. Threat of New Entrants
  • 4.1.4. Threat of Substitutes
  • 4.1.5. Competitive Rivalry
• 4.2. Porter's 5 Force Impact Analysis
• 4.3. PEST Analysis
  • 4.3.1. Political
  • 4.3.2. Economical
  • 4.3.3. Social
  • 4.3.4. Technological
  • 4.3.5. Environmental
  • 4.3.6. Legal
• 4.4. Top investment opportunity
• 4.5. Top winning strategies
• 4.6. COVID-19 Impact Analysis
• 4.7. Disruptive Trends
• 4.8. Industry Expert Perspective
• 4.9. Analyst Recommendation & Conclusion

Chapter 5. Global Direct Reduced Iron Market, by Form

• 5.1. Market Snapshot
• 5.2. Global Direct Reduced Iron Market by Form, Performance - Potential Analysis
• 5.3. Global Direct Reduced Iron Market Estimates & Forecasts by Form 2020-2030 (USD Billion)
• 5.4. Direct Reduced Iron Market, Sub Segment Analysis
  • 5.4.1. Pellets
  • 5.4.2. Others

Chapter 6. Global Direct Reduced Iron Market, by Production Process

• 6.1. Market Snapshot
• 6.2. Global Direct Reduced Iron Market by Production Process, Performance - Potential Analysis
• 6.3. Global Direct Reduced Iron Market Estimates & Forecasts by Production Process 2020-2030 (USD Billion)
• 6.4. Direct Reduced Iron Market, Sub Segment Analysis
  • 6.4.1. Gas-based
  • 6.4.2. Coal-based

Chapter 7. Global Direct Reduced Iron Market, by Application

• 7.1. Market Snapshot
• 7.2. Global Direct Reduced Iron Market by Application, Performance - Potential Analysis
• 7.3. Global Direct Reduced Iron Market Estimates & Forecasts by Application 2020-2030 (USD Billion)
• 7.4. Direct Reduced Iron Market, Sub Segment Analysis
  • 7.4.1. Steel Production
  • 7.4.2. Construction
  • 7.4.3. Others

Chapter 8. Global Direct Reduced Iron Market, Regional Analysis

• 8.1. Top Leading Countries
• 8.2. Top Emerging Countries
• 8.3. Direct Reduced Iron Market, Regional Market Snapshot
• 8.4. North America Direct Reduced Iron Market
  • 8.4.1. U.S. Direct Reduced Iron Market
    • 8.4.1.1. Form breakdown estimates & forecasts, 2020-2030
    • 8.4.1.2. Production Process breakdown estimates & forecasts, 2020-2030
    • 8.4.1.3. Application breakdown estimates & forecasts, 2020-2030
  • 8.4.2. Canada Direct Reduced Iron Market
• 8.5. Europe Direct Reduced Iron Market Snapshot
  • 8.5.1. U.K. Direct Reduced Iron Market
  • 8.5.2. Germany Direct Reduced Iron Market
  • 8.5.3. France Direct Reduced Iron Market
  • 8.5.4. Spain Direct Reduced Iron Market
  • 8.5.5. Italy Direct Reduced Iron Market
  • 8.5.6. Rest of Europe Direct Reduced Iron Market
• 8.6. Asia-Pacific Direct Reduced Iron Market Snapshot
  • 8.6.1. China Direct Reduced Iron Market
  • 8.6.2. India Direct Reduced Iron Market
  • 8.6.3. Japan Direct Reduced Iron Market
  • 8.6.4. Australia Direct Reduced Iron Market
  • 8.6.5. South Korea Direct Reduced Iron Market
  • 8.6.6. Rest of Asia Pacific Direct Reduced Iron Market
• 8.7. Latin America Direct Reduced Iron Market Snapshot
  • 8.7.1. Brazil Direct Reduced Iron Market
  • 8.7.2. Mexico Direct Reduced Iron Market
• 8.8. Middle East & Africa Direct Reduced Iron Market
  • 8.8.1. Saudi Arabia Direct Reduced Iron Market
  • 8.8.2. South Africa Direct Reduced Iron Market
  • 8.8.3. Rest of Middle East & Africa Direct Reduced Iron Market

Chapter 9. Competitive Intelligence

• 9.1. Key Company SWOT Analysis
  • 9.1.1. Company 1
  • 9.1.2. Company 2
  • 9.1.3. Company 3
• 9.2. Top Market Strategies
• 9.3. Company Profiles
  • 9.3.1. Qatar Steel (Qatar)
    • 9.3.1.1. Key Information
    • 9.3.1.2. Overview
    • 9.3.1.3. Financial (Subject to Data Availability)
    • 9.3.1.4. Product Summary
    • 9.3.1.5. Recent Developments
  • 9.3.2. Kobe Steel Ltd (Japan)
  • 9.3.3. ArcelorMittal (Luxembourg)
  • 9.3.4. NUCOR Corporation (U.S.)
  • 9.3.5. Midrex Technologies Inc. (U.S.)
  • 9.3.6. Khouzestan Steel Company (Khuzestan)
  • 9.3.7. Welspun Group (India)
  • 9.3.8. Jindal Shadeed Iron & Steel LLC (Oman)
  • 9.3.9. AM/NS India (India)
  • 9.3.10. Tosyali Algeria A.S. (Algeria)

Chapter 10. Research Process

• 10.1. Research Process
  • 10.1.1. Data Mining
  • 10.1.2. Analysis
  • 10.1.3. Market Estimation
  • 10.1.4. Validation
  • 10.1.5. Publishing
• 10.2. Research Attributes
• 10.3. Research Assumption