세계의 첨단 전자 패키징용 고분자 재료 시장(2026-2036년)

The polymeric materials market for advanced electronic packaging has emerged as a critical enabler of next-generation semiconductor technologies. This rapid expansion reflects the semiconductor industry's fundamental shift toward advanced packaging architectures driven by the physical limitations of traditional transistor scaling and the insatiable demand for higher performance, greater functionality, and improved energy efficiency. The market's growth is propelled by several transformative semiconductor megatrends, including high-performance computing (HPC), generative AI, automotive ADAS systems, 5G/6G communications, AR/VR applications, and edge AI deployment. These applications demand packaging solutions that can accommodate larger dies, support chiplet integration, enable heterogeneous integration of diverse semiconductor technologies, and deliver superior thermal management-all requirements that place unprecedented demands on polymeric materials.

As transistor scaling reaches its physical limits, the industry has pivoted to advanced packaging as the primary path for continued performance improvements. This transition has elevated polymeric materials from simple encapsulation functions to sophisticated engineered materials that must simultaneously address mechanical stress management, electrical signal integrity, thermal dissipation, dimensional stability, and long-term reliability challenges.

The market encompasses four primary material categories: dielectric materials, mold compounds, underfills, and temporary bonding/debonding (TBDB) materials. Dielectric materials, including polyimides (PI), polybenzoxazole (PBO), benzocyclobutene (BCB), and epoxy-acrylic composites, serve as critical insulation layers in redistribution layer (RDL) structures, enabling fine-pitch interconnects with low electrical loss. Mold compounds provide mechanical protection and thermal management, with increasing emphasis on high thermal conductivity formulations for AI and HPC applications. Underfill materials-available as capillary underfills (CUF), molded underfills (MUF), non-conductive films (NCF), and non-conductive pastes (NCP)-mitigate thermomechanical stress between chips and substrates. TBDB materials enable wafer thinning and backside processing essential for 3D integration and through-silicon via (TSV) formation.

Mobile and consumer electronics currently dominate market volumes and revenues, but telecom and infrastructure segments are experiencing the fastest growth, driven by hyperscale data center buildouts supporting AI workloads. Among packaging platforms, System-in-Package (SiP) remains the largest consumer of polymeric materials, while 2.5D and 3D packaging represent the fastest-growing segments with CAGRs exceeding 28-35%, reflecting the industry's embrace of chiplet architectures and heterogeneous integration for advanced processors. The polymeric materials supply chain exhibits significant concentration. Geographic concentration is even more pronounced.

The industry faces critical technical challenges, particularly coefficient of thermal expansion (CTE) mismatch between polymers and silicon, which drives warpage and reliability concerns in large, thin packages. Since polymers expand significantly more than silicon under thermal cycling, material developers are pursuing application-specific formulations that balance competing requirements: low CTE, high thermal conductivity, low dielectric constant, superior adhesion, fine-pitch patterning capability, and increasingly, PFAS-free compositions to meet evolving environmental regulations. The convergence of AI-driven computing demands, regulatory pressures for sustainable materials, and the technical complexity of 3D heterogeneous integration positions polymeric materials as indispensable enablers of semiconductor innovation through 2036 and beyond.

"The Global Market for Polymeric Materials for Advanced Electronic Packaging 2026-2036" delivers in-depth analysis of the polymeric materials ecosystem, encompassing dielectric materials, molding compounds, underfill materials, and temporary bonding/debonding (TBDB) solutions that enable next-generation semiconductor packaging technologies.

As Moore's Law approaches physical limitations, the semiconductor industry has pivoted toward advanced packaging architectures including System-in-Package (SiP), Fan-Out Wafer Level Packaging (FOWLP), 2.5D packaging, 3D packaging, and chiplet integration. These sophisticated packaging platforms demand increasingly specialized polymeric materials capable of meeting stringent requirements for thermal management, electrical performance, mechanical reliability, and dimensional stability. This report provides essential intelligence for materials suppliers, packaging manufacturers, semiconductor fabs, OSAT providers, equipment manufacturers, and strategic investors seeking to capitalize on this high-growth market opportunity.

The report delivers comprehensive market forecasts segmented by material category (dielectric, mold compound, underfill, TBDB), packaging platform (SiP, FOWLP, 2.5D, 3D, embedded die), end-market application (mobile & consumer electronics, HPC & AI, automotive & ADAS, telecom & infrastructure, IoT & edge computing, AR/VR), and geographic region spanning the decade from 2026 through 2036. Detailed revenue and volume projections enable stakeholders to identify the fastest-growing market segments, with particular emphasis on the explosive growth anticipated in 2.5D/3D packaging driven by artificial intelligence, high-performance computing, and generative AI applications.

Technology analysis examines the evolution of material chemistries including polyimides (PI), polybenzoxazole (PBO), benzocyclobutene (BCB), epoxy-based systems, and acrylic resin composites, evaluating critical performance parameters such as coefficient of thermal expansion (CTE), dielectric constant (Dk), dissipation factor (Df), glass transition temperature (Tg), thermal conductivity, and moisture absorption. The report explores emerging innovations in panel-level packaging, co-packaged optics (CPO), sustainable bio-based polymers, and AI-driven material design optimization.

Supply chain intelligence reveals the competitive landscape dominated by Japanese suppliers commanding approximately 80% market share, with detailed profiles of over 90 companies including material suppliers, packaging service providers, semiconductor manufacturers, and equipment vendors. Market share analysis identifies the top players across each material category, highlighting strategic positioning, technological capabilities, geographic presence, and competitive advantages. The report examines critical industry trends including PFAS-free material development, carbon emission reduction initiatives, recycled material integration, and regulatory compliance requirements.

Technical challenges and solutions address the industry's most pressing concerns: CTE mismatch and warpage control in large packages, moisture sensitivity and long-term reliability, high-temperature performance for automotive applications, fine-pitch interconnect capability for advanced nodes, process integration complexity, and cost optimization strategies. Technology roadmaps project material evolution through 2036, identifying innovation opportunities and potential disruptive technologies.

Report Contents include:

• Market Analysis & Forecasts
  • Executive summary with context, market overview, and key drivers (2026-2036)
  • Global market size and growth projections with 13% CAGR analysis
  • Market forecasts by material category: dielectrics, mold compounds, underfills, TBDB materials
  • Market segmentation by end-market: Mobile/Consumer, HPC/AI, Automotive/ADAS, Telecom, IoT, AR/VR
  • Market analysis by packaging platform: SiP, FOWLP, 2.5D, 3D, Embedded Die
  • 2.5D/3D packaging growth trajectory showing 28-35% CAGR
  • Regional market distribution across Asia, Americas, and Europe
  • Price trend analysis and volume forecasts through 2036
• Material Technology Deep Dives
  • Dielectric materials: PI, PBO, BCB, epoxy-based, acrylic composites with suppliers and specifications
  • Molding compounds: EMC, MUF, liquid molding with thermal conductivity roadmaps
  • Underfill materials: CUF, MUF, NCF, NCP with fine-pitch and hybrid bonding capabilities
  • Temporary bonding/debonding: thermal slide, laser, chemical, mechanical, UV-release technologies
  • Material property comparisons: CTE, Dk, Df, Tg, thermal conductivity, moisture absorption
  • Deposition processes: spin-on, spray coating, lamination, compression molding, transfer molding
  • Advanced lithography capabilities and fine-pitch patterning (sub-2 micrometer resolution)
• Supply Chain & Competitive Intelligence
  • Polymeric materials ecosystem map with 50+ suppliers by category
  • Top 20 supplier rankings with market share analysis (2024-2036)
  • Geographic concentration analysis
  • Vertical integration analysis and manufacturing capacity assessments
• Emerging Technologies & Applications
  • Panel-level packaging material requirements and cost benefits (510mm-600mm panels)
  • Co-packaged optics (CPO) with low-loss polymers for optical waveguides
  • Chiplet integration and heterogeneous integration material challenges
  • Advanced thermal management materials for AI/HPC applications
  • Sustainable and bio-based polymeric materials development
  • AI-driven material design and optimization methodologies
  • Next-generation material innovations and technology readiness levels
• Regulatory & Technical Challenges
  • PFAS-free material requirements and compliance timeline
  • CO2 emission standards and sustainability initiatives
  • Recycled material integration strategies
  • Safety Data Sheet (SDS) compliance requirements
  • CTE mismatch and warpage control solutions for large packages
  • Moisture sensitivity and reliability standards (MSL ratings)
  • High-temperature performance requirements (>260 degree C) for automotive
  • Fine-pitch interconnect technology roadmap (bump pitch evolution)
  • Material characterization and industry standardization initiatives
  • Process integration challenges and cost optimization strategies
• Company Profiles (91 Companies)
  • Detailed profiles of material suppliers, OSAT providers, semiconductor manufacturers
  • Product portfolios, technological capabilities, and market positioning
  • Geographic presence and manufacturing facilities
  • Strategic initiatives, R&D investments, and recent developments
  • Contact information and corporate structure

This comprehensive report includes detailed profiles of 91 leading companies active in the polymeric materials ecosystem for advanced electronic packaging: 3M, AEMC, AI Technology, Ajinomoto, AMD, Amkor Technology, AOI Electronics, Applied Materials, Asahi Kasei, ASE, Brewer Science, Caplinq, Chang Chun Group, Chang Wah Electromaterials, CXMT, Darbond, Deca Technologies, DELO, Dupont, Empower Materials, Epoxy Technology, Eternal Materials, Everlight Chemical, Fujifilm, GlobalFoundries, HD Microsystems, Henkel, Huahai Chengke, Hysol, IBM, Imec, Innolux, Intel, JCET, JSR, Kayaku Advanced Materials, KCC, Kyocera, MacDermid Alpha, Manz, MASTERBOND, Merck, Micro Materials, Micron, Mingkun Technologies, Minseoa, Mitsubishi Gas Chemical, Mitsui Chemicals, Murata, Nagase ChemteX, Namics and more. These profiles encompass the complete value chain from raw material suppliers and specialty chemical manufacturers to advanced packaging service providers, leading semiconductor fabs, and equipment manufacturers driving innovation in polymeric materials for next-generation electronic packaging applications.

TABLE OF CONTENTS

1. EXECUTIVE SUMMARY

• 1.1. Context and Market Overview
• 1.2. Advanced Packaging Market Trends
  • 1.2.1. Chiplet Architecture Adoption
  • 1.2.2. 2.5D and 3D Integration Expansion
  • 1.2.3. High-Bandwidth Memory Proliferation
  • 1.2.4. Panel-Level Packaging Emergence
• 1.3. Key Market Drivers
  • 1.3.1. Artificial Intelligence and High-Performance Computing
  • 1.3.2. Automotive ADAS and Electrification
  • 1.3.3. 5G/6G Communications Infrastructure
  • 1.3.4. Consumer Electronics Miniaturization
  • 1.3.5. IoT and Edge Computing Expansion
• 1.4. Market Forecast Summary
• 1.5. Competitive Landscape Overview

2. POLYMERIC MATERIALS IN ADVANCED PACKAGING

• 2.1. Definition of Polymeric Materials
• 2.2. Polymeric Materials Categories in Advanced Packaging
  • 2.2.1. Dielectric Materials
  • 2.2.2. Mold Compounds
  • 2.2.3. Underfill Materials
  • 2.2.4. Temporary Bonding/Debonding Materials
• 2.3. Role of Polymers in Next-Generation Packaging
  • 2.3.1. Enabling High-Density Interconnects
  • 2.3.2. Managing Thermomechanical Stress
  • 2.3.3. Supporting Thermal Management
  • 2.3.4. Enabling Manufacturing Processes
• 2.4. Overview of Materials Technology Trends
  • 2.4.1. Low-Loss Dielectrics for High-Frequency Applications
  • 2.4.2. High Thermal Conductivity Mold Compounds
  • 2.4.3. Fine-Pitch Underfill Technology
  • 2.4.4. TBDB for Extreme Wafer Thinning
  • 2.4.5. Computational Materials Design
• 2.5. Material Requirements Evolution
  • 2.5.1. Application-Specific Requirements
• 2.6. Challenges of Soft Materials in Advanced Packaging
  • 2.6.1. Coefficient of Thermal Expansion Mismatch
  • 2.6.2. Moisture Sensitivity
  • 2.6.3. Outgassing and Contamination
  • 2.6.4. Thermal Stability Limitations
  • 2.6.5. Computational Approaches to Material Development

3. GLOBAL MARKET FORECAST

• 3.1. Global Market Size and Growth Projections (2026-2036)
  • 3.1.1. Growth Phase Characteristics
• 3.2. Market Share by Material and Package Types
  • 3.2.1. Dielectric Materials
  • 3.2.2. Mold Compounds
  • 3.2.3. Underfill Materials
  • 3.2.4. TBDB Materials
• 3.3. Polymeric Materials Revenue and Volume Forecast
  • 3.3.1. Material Consumption by Package Type
  • 3.3.2. Material Intensity Analysis
  • 3.3.3. Volume Forecast by Material Category
• 3.4. Price Dynamics by Category
• 3.5. Market Forecast by End-Market
  • 3.5.1. Mobile & Consumer Electronics
  • 3.5.2. High-Performance Computing (HPC) and AI
  • 3.5.3. Automotive and ADAS
  • 3.5.4. Telecom and Infrastructure
  • 3.5.5. IoT and Edge Computing
  • 3.5.6. AR/VR Applications
• 3.6. Market Forecast by Packaging Platform
  • 3.6.1. System-in-Package (SiP)
  • 3.6.2. Fan-Out Wafer Level Packaging (FOWLP)
  • 3.6.3. 2.5D Packaging
  • 3.6.4. 3D Packaging and Chiplet Integration
  • 3.6.5. Embedded Die Packaging
• 3.7. 2.5D/3D Packaging Growth
  • 3.7.1. Growth Trajectory Analysis
  • 3.7.2. Demand Drivers
  • 3.7.3. Technology Roadmap
• 3.8. Regional Market Analysis
  • 3.8.1. Asia-Pacific
  • 3.8.2. North America
  • 3.8.3. Europe
• 3.9. Market Trends and Opportunities
  • 3.9.1. Panel-Level Packaging Commercialization
  • 3.9.2. PFAS-Free Material Development
  • 3.9.3. AI-Accelerated Material Discovery
  • 3.9.4. Sustainability and Circular Economy

4. POLYMERIC MATERIALS SUPPLY CHAIN FOR ADVANCED PACKAGING

• 4.1. Advanced Packaging Supply Chain Overview
  • 4.1.1. Value Chain Structure
  • 4.1.2. Value Distribution
• 4.2. Overview of Material Suppliers by Material Category
  • 4.2.1. Dielectric Materials Supplier Landscape
  • 4.2.2. Mold Compound Supplier Landscape
  • 4.2.3. Underfill Supplier Landscape
  • 4.2.4. TBDB Supplier Landscape
• 4.3. Supply Chain Analysis and Dynamics
  • 4.3.1. Concentration Risks
  • 4.3.2. Chinese Supply Development
  • 4.3.3. Vertical Integration Trends
• 4.4. Regulations for Polymeric Materials
  • 4.4.1. PFAS-Free Requirements
  • 4.4.2. CO2 Emission Standards
  • 4.4.3. Recycled Material Integration
  • 4.4.4. Safety Data Sheet Compliance
  • 4.4.5. AI Implementation in Material Development

5. DIRECT MATERIALS-DIELECTRIC MATERIALS

• 5.1. Definition and Overview of Dielectric Materials
• 5.2. Application of Dielectric Materials in Advanced Packaging
  • 5.2.1. Redistribution Layer (RDL) Formation
  • 5.2.2. Interposer Dielectrics
  • 5.2.3. Passivation and Buffer Layers
  • 5.2.4. Panel-Level Packaging Applications
• 5.3. Polymeric Dielectric Material Market Trends
  • 5.3.1. Low-Loss Material Development
  • 5.3.2. Fine-Pitch Patterning Capability
  • 5.3.3. Thickness Uniformity and Control
• 5.4. Material Segmentation and Deposition Processes
  • 5.4.1. Polyimides (PI)
    • 5.4.1.1. Chemistry and Structure
    • 5.4.1.2. Property Profile
    • 5.4.1.3. Photosensitive Variants
    • 5.4.1.4. Applications and Suppliers
  • 5.4.2. Polybenzoxazole (PBO)
    • 5.4.2.1. Chemistry and Structure
    • 5.4.2.2. Property Profile
    • 5.4.2.3. Applications and Suppliers
  • 5.4.3. Benzocyclobutene (BCB)
    • 5.4.3.1. Chemistry and Structure
    • 5.4.3.2. Property Profile
    • 5.4.3.3. Applications and Suppliers
  • 5.4.4. Epoxy-Based Dielectrics
    • 5.4.4.1. Chemistry and Structure
    • 5.4.4.2. Property Profile
    • 5.4.4.3. Applications and Suppliers
  • 5.4.5. Acrylic Resin Composites
    • 5.4.5.1. Property Profile
    • 5.4.5.2. Applications
• 5.5. Dielectric Material Requirements for Advanced Packaging
  • 5.5.1. Electrical Properties (Low Dk, Low Df)
    • 5.5.1.1. Dielectric Constant (Dk)
    • 5.5.1.2. Dissipation Factor (Df)
    • 5.5.1.3. Frequency Stability
  • 5.5.2. Thermal Stability
    • 5.5.2.1. Processing Compatibility
    • 5.5.2.2. Operational Requirements
  • 5.5.3. Mechanical Properties
    • 5.5.3.1. Modulus and Strength
    • 5.5.3.2. Stress and Warpage
  • 5.5.4. CTE Control and Warpage Management
    • 5.5.4.1. CTE Values and Mismatch
    • 5.5.4.2. Warpage Impact
  • 5.5.5. Adhesion and Patternability
• 5.6. Comparison Between Different Material Types
  • 5.6.1. Electrical Performance Ranking
  • 5.6.2. Processability Ranking
  • 5.6.3. Thermal Stability Ranking
  • 5.6.4. Cost Ranking
• 5.7. Panel Level Packaging Material Trends
  • 5.7.1. Scale-Related Challenges
  • 5.7.2. Process Adaptation Requirements
  • 5.7.3. Current Development Status
• 5.8. Advanced Lithography and Fine Pitch Capabilities
  • 5.8.1. Resolution Requirements
  • 5.8.2. Photosensitive Dielectric Optimization
  • 5.8.3. Via Formation Considerations
  • 5.8.4. Equipment Requirements
• 5.9. Dielectric Material Suppliers by Material Type
  • 5.9.1. Polyimide Supplier Landscape
  • 5.9.2. PBO Supplier Landscape
  • 5.9.3. BCB Supplier Landscape
  • 5.9.4. Epoxy and Composite Dielectric Suppliers
• 5.10. Technology Roadmap for Dielectric Materials
• 5.11. Dielectric Material Market Forecast (2026-2036)
  • 5.11.1. Growth Drivers
  • 5.11.2. Segment Dynamics
  • 5.11.3. Price Dynamics

6. DIRECT MATERIALS - MOLDING COMPOUNDS

• 6.1. Definition and Overview of Mold Compound Materials
• 6.2. Application of Mold Compounds in Advanced Packaging
  • 6.2.1. Fan-Out Wafer Level Packaging (FOWLP)
  • 6.2.2. System-in-Package (SiP)
  • 6.2.3. 2.5D and 3D Packaging
  • 6.2.4. Compression Molding Dominance
• 6.3. Epoxy Mold Compound (EMC) Technology
  • 6.3.1. Base Chemistry
  • 6.3.2. Property Profiles
  • 6.3.3. Advanced Formulations
• 6.4. Molded Underfill (MUF) vs. Traditional EMC
  • 6.4.1. MUF Concept
  • 6.4.2. MUF Material Requirements
  • 6.4.3. Trade-offs
  • 6.4.4. Market Positioning
• 6.5. Material Segmentation and Deposition Processes
  • 6.5.1. Compression Molding
    • 6.5.1.1. Process Description
    • 6.5.1.2. Advantages
    • 6.5.1.3. Equipment and Process Considerations
  • 6.5.2. Transfer Molding
    • 6.5.2.1. Process Description
    • 6.5.2.2. Applications
    • 6.5.2.3. Limitations
  • 6.5.3. Liquid Molding
    • 6.5.3.1. Process Description
    • 6.5.3.2. Applications
• 6.6. Mold Compound Requirements for Advanced Packaging
  • 6.6.1. Low Warpage and CTE Control
    • 6.6.1.1. Warpage Mechanisms
    • 6.6.1.2. CTE Control Strategies
    • 6.6.1.3. Warpage Management
  • 6.6.2. High Thermal Conductivity
    • 6.6.2.1. Thermal Requirements by Application
    • 6.6.2.2. Thermally Conductive Filler Options
    • 6.6.2.3. Trade-offs
  • 6.6.3. Low Moisture Absorption
    • 6.6.3.1. Moisture-Related Failures
    • 6.6.3.2. Moisture Absorption Levels
    • 6.6.3.3. Moisture Resistance Strategies
  • 6.6.4. Filler Size and Content Optimization
    • 6.6.4.1. Filler Loading Effects
    • 6.6.4.2. Filler Size Distribution
  • 6.6.5. High Reliability and Mechanical Strength
    • 6.6.5.1. Reliability Requirements
    • 6.6.5.2. Mechanical Property Requirements
• 6.7. Mold Compound Processing Challenges
  • 6.7.1. Large Package Size Handling
    • 6.7.1.1. Flow Completion
    • 6.7.1.2. Warpage Control
    • 6.7.1.3. Equipment Requirements
  • 6.7.2. Thin Profile Requirements
    • 6.7.2.1. Thin Package Challenges
    • 6.7.2.2. Material Adaptations
  • 6.7.3. High-Temperature Applications
    • 6.7.3.1. Temperature Requirements
    • 6.7.3.2. Material Requirements
    • 6.7.3.3. Available Solutions
• 6.8. Innovations in Thermoplastic Polymers
  • 6.8.1. Thermoplastic vs. Thermoset
  • 6.8.2. Potential Thermoplastic Advantages
  • 6.8.3. Challenges and Limitations
  • 6.8.4. Current Status
• 6.9. Mold Compound Suppliers by Material Type
• 6.10. Technology Roadmap for Mold Compounds
• 6.11. Mold Compound Market Forecast (2026-2036)
  • 6.11.1. Growth Drivers
  • 6.11.2. Segment Dynamics
  • 6.11.3. Price Dynamics

7. DIRECT MATERIALS - UNDERFILL MATERIALS

• 7.1. Definition and Overview of Underfill Materials
• 7.2. Application of Underfill in Advanced Packaging
  • 7.2.1. Flip-Chip on Substrate (FCOS)
  • 7.2.2. Flip-Chip on Interposer
  • 7.2.3. Die-to-Die Stacking
  • 7.2.4. High-Bandwidth Memory (HBM)
  • 7.2.5. Hybrid Bonding Applications
• 7.3. Material Segmentation and Processing
  • 7.3.1. Capillary Underfill (CUF)
    • 7.3.1.1. Process Description
    • 7.3.1.2. Material Characteristics
    • 7.3.1.3. Advantages and Limitations
  • 7.3.2. Molded Underfill (MUF)
    • 7.3.2.1. Process Integration
    • 7.3.2.2. Material Requirements
    • 7.3.2.3. Pitch Limitations
  • 7.3.3. Non-Conductive Film (NCF)
    • 7.3.3.1. Process Description
    • 7.3.3.2. Material Characteristics
    • 7.3.3.3. Advantages and Limitations
  • 7.3.4. Non-Conductive Paste (NCP)
    • 7.3.4.1. Process Description
    • 7.3.4.2. Material Characteristics
    • 7.3.4.3. Applications
• 7.4. Underfill Requirements for Advanced Packaging
  • 7.4.1. Flow Characteristics and Void Control
    • 7.4.1.1. Flow Requirements
    • 7.4.1.2. Void Formation Mechanisms
    • 7.4.1.3. Void Mitigation
  • 7.4.2. CTE Matching and Stress Management
    • 7.4.2.1. CTE Values and Mismatch
    • 7.4.2.2. CTE Optimization Strategies
    • 7.4.2.3. Stress Distribution
  • 7.4.3. Fast Cure and High Throughput
    • 7.4.3.1. Cure Time Targets
    • 7.4.3.2. Fast-Cure Chemistry Options
    • 7.4.3.3. Trade-offs
  • 7.4.4. Thermal and Electrical Performance
    • 7.4.4.1. Thermal Conductivity
    • 7.4.4.2. Electrical Properties
  • 7.4.5. Reworkability Considerations
    • 7.4.5.1. Rework Importance
    • 7.4.5.2. Rework Methods
    • 7.4.5.3. Material Reworkability
• 7.5. Fine Pitch and Micro-Bump Applications
  • 7.5.1. Pitch Trends
  • 7.5.2. Fine-Pitch Challenges
  • 7.5.3. Material Approaches
  • 7.5.4. Process Approaches
• 7.6. Hybrid Bonding Compatible Underfills
  • 7.6.1. Hybrid Bonding Concept
  • 7.6.2. Implications for Underfill
  • 7.6.3. Remaining Material Requirements
  • 7.6.4. Development Status
• 7.7. Underfill Suppliers by Material Type
• 7.8. Technology Roadmap for Underfill Materials
• 7.9. Underfill Material Market Forecast (2026-2036)
  • 7.9.1. Growth Drivers
  • 7.9.2. Segment Dynamics
  • 7.9.3. Price Dynamics

8. INDIRECT MATERIALS - TEMPORARY BONDING/DEBONDING

• 8.1. Definition and Overview of TBDB Materials
• 8.2. Application of TBDB in Advanced Packaging
  • 8.2.1. HBM Memory Stacking
  • 8.2.2. Logic Die Thinning
  • 8.2.3. Interposer Processing
  • 8.2.4. Panel-Level Applications
• 8.3. Material Segmentation and Application Formats
  • 8.3.1. Adhesive-Based TBDB
    • 8.3.1.1. Chemistry and Structure
    • 8.3.1.2. Property Requirements
    • 8.3.1.3. Debonding Options
  • 8.3.2. Polymer-Based TBDB
    • 8.3.2.1. Release Layer Concepts
    • 8.3.2.2. Multi-Layer Structures
  • 8.3.3. Film-Based TBDB
    • 8.3.3.1. Dry Film Advantages
    • 8.3.3.2. Applications
• 8.4. Debonding Technologies and Process Flow
  • 8.4.1. Thermal Slide Debonding
  • 8.4.2. Laser Debonding
    • 8.4.2.1. Process Description
    • 8.4.2.2. Release Layer Chemistry
    • 8.4.2.3. Advantages and Limitations
  • 8.4.3. Chemical Debonding
    • 8.4.3.1. Process Description
    • 8.4.3.2. Chemistry Options
  • 8.4.4. Mechanical Debonding
    • 8.4.4.1. Process Description
    • 8.4.4.2. Advantages and Limitations
  • 8.4.5. UV-Release Technology
    • 8.4.5.1. Process Description
    • 8.4.5.2. Chemistry Requirements
• 8.5. TBDB Material Requirements and Technology Trends
  • 8.5.1. Bond Strength and Thermal Stability
    • 8.5.1.1. Bond Strength Requirements
    • 8.5.1.2. Thermal Stability
    • 8.5.1.3. Trade-offs
  • 8.5.2. Clean Debonding with Minimal Residue
    • 8.5.2.1. Residue Sources
    • 8.5.2.2. Cleanliness Requirements
    • 8.5.2.3. Residue Mitigation
  • 8.5.3. Carrier Wafer Compatibility
    • 8.5.3.1. Carrier Options
    • 8.5.3.2. Compatibility Considerations
  • 8.5.4. Through-Silicon Via (TSV) Processing
    • 8.5.4.1. TSV Process Requirements
• 8.6. Wafer Thinning and Ultra-Thin Wafer Handling
  • 8.6.1. Thinning Roadmap
  • 8.6.2. Handling Challenges
  • 8.6.3. TBDB Role
• 8.7. Panel Level Packaging TBDB Solutions
  • 8.7.1. Panel Characteristics
  • 8.7.2. TBDB Challenges for Panels
  • 8.7.3. Development Status
• 8.8. TBDB Material Suppliers by Technology
• 8.9. Technology Roadmap for TBDB Materials
• 8.10. TBDB Material Market Forecast (2026-2036)
  • 8.10.1. Growth Drivers
  • 8.10.2. Technology Mix Evolution
  • 8.10.3. Price Dynamics

9. EMERGING MATERIALS AND APPLICATIONS

• 9.1. Polymeric Materials in Panel-Level Packaging
  • 9.1.1. Panel Size Scaling Challenges
  • 9.1.2. Material Requirements for Large Panels
    • 9.1.2.1. Dielectric Materials
    • 9.1.2.2. Mold Compounds
    • 9.1.2.3. TBDB for Panels
  • 9.1.3. Cost Benefits and Manufacturing Efficiency
    • 9.1.3.1. Area Efficiency
    • 9.1.3.2. Cost Reduction Potential
• 9.2. Polymeric Materials in Co-Packaged Optics (CPO)
  • 9.2.1. Optical Material Requirements
    • 9.2.1.1. Optical Transparency
    • 9.2.1.2. Refractive Index Control
  • 9.2.2. Low-Loss Polymers for Waveguides
    • 9.2.2.1. Loss Mechanisms
    • 9.2.2.2. Loss Targets
    • 9.2.2.3. Material Candidates
  • 9.2.3. Integration with Silicon Photonics
    • 9.2.3.1. Process Compatibility
    • 9.2.3.2. Interface Management
• 9.3. Polymers for Chiplet Integration and Heterogeneous Integration
  • 9.3.1. Chiplet Architecture Implications
  • 9.3.2. Material Requirements
  • 9.3.3. UCIe and Standardization
• 9.4. Advanced Thermal Management Materials
  • 9.4.1. Thermal Challenges
  • 9.4.2. Material Approaches
  • 9.4.3. Development Status
• 9.5. Sustainable and Bio-Based Polymeric Materials
• 9.6. Next-Generation Material Innovations
  • 9.6.1. Self-Healing Polymers
  • 9.6.2. Thermally Conductive Polymer Composites
  • 9.6.3. Recyclable Thermoset Alternatives
• 9.7. AI-Driven Material Design and Optimization
  • 9.7.1. Current Applications
  • 9.7.2. Demonstrated Benefits
  • 9.7.3. Future Potential

10. TECHNOLOGY CHALLENGES AND FUTURE OUTLOOK

• 10.1. Key Technical Challenges
  • 10.1.1. CTE Mismatch and Warpage Control
    • 10.1.1.1. Physics of the Challenge
    • 10.1.1.2. Consequences
    • 10.1.1.3. Mitigation Approaches
    • 10.1.1.4. Outlook
  • 10.1.2. Moisture Sensitivity and Reliability
    • 10.1.2.1. Moisture Effects
    • 10.1.2.2. Current Status
    • 10.1.2.3. Development Directions
  • 10.1.3. High-Temperature Performance
    • 10.1.3.1. Temperature Requirements
    • 10.1.3.2. Material Limitations
    • 10.1.3.3. Development Needs
  • 10.1.4. Fine Pitch and High-Density Interconnects
    • 10.1.4.1. Pitch Evolution
    • 10.1.4.2. Material Challenges
    • 10.1.4.3. Hybrid Bonding Transition
• 10.2. Material Characterization and Standardization
  • 10.2.1. Characterization Challenges
  • 10.2.2. Standardization Initiatives
  • 10.2.3. Gaps and Needs
• 10.3. Process Integration Challenges
  • 10.3.1. Process Complexity
  • 10.3.2. Process Compatibility Requirements
  • 10.3.3. Co-optimization Challenges
• 10.4. Cost and Supply Chain Considerations
  • 10.4.1. Cost Pressures
  • 10.4.2. Supply Concentration Risks
  • 10.4.3. Mitigation Strategies
• 10.5. Environmental and Regulatory Compliance
  • 10.5.1. PFAS Restrictions
  • 10.5.2. Carbon Footprint Requirements
  • 10.5.3. Conflict Minerals and Responsible Sourcing
• 10.6. Future Trends and Opportunities
  • 10.6.1. AI and HPC Driving Demand
    • 10.6.1.1. Demand Scale
    • 10.6.1.2. Material Opportunities
  • 10.6.2. 5G/6G Communications Impact
    • 10.6.2.1. 5G Deployment
    • 10.6.2.2. 6G Research
  • 10.6.3. Automotive Electronics Growth
    • 10.6.3.1. Content Growth
    • 10.6.3.2. Material Premium
• 10.7. Technology Roadmap 2026-2036

11. COMPANY PROFILES (89 company profiles)

12. APPENDIX 1

• 12.1. Report Objectives
• 12.2. Scope of the Report
• 12.3. Methodologies and Definitions

13. REFERENCES