알루미늄 사일로 시장 기회, 성장요인, 업계 동향 분석 및 예측(2025-2034년)

The Global Aluminum Silos Market was valued at USD 476.6 million in 2024 and is estimated to grow at a CAGR of 7.5% to reach USD 983.3 million by 2034.

Rising food safety regulations are compelling manufacturers and agricultural operators to upgrade their storage solutions. Regulatory frameworks like the FDA Food Safety Modernization Act (FSMA) require proactive controls and hygienic storage environments to minimize contamination risks, while USDA and other international HACCP-based standards demand controlled conditions for grains and processed foods. Aluminum silos outperform alternatives like porous concrete due to their smooth interior surfaces, which naturally resist microbial growth. Strict compliance is particularly crucial in export-driven economies, where international standards are mandatory. Investment in advanced aluminum silos is further supported by increasing global efforts to prevent foodborne illnesses and growing environmental awareness, as manufacturers promote high-recycled-content products to meet sustainability goals and reduce greenhouse gas emissions.

The welded aluminum silo segment generated USD 309.7 million in 2024. Welded silos dominate the market because of their superior structural stability and longer service life compared to bolted or modular designs. Unlike bolted silos, which join panels with bolts and joints, welded silos feature continuous aluminum plates that minimize leakage risks and contamination potential. Their seamless design provides durability against environmental stresses, including wind and temperature fluctuations, making them ideal for storing sensitive materials such as grains, powders, and chemicals.

The silos with capacities below 100 m3 held a 43.1% share in 2024. This segment is popular among small-scale farmers and food processors, especially in developing regions and rural areas, where limited land and production scale necessitate smaller storage solutions. Compact silos are cost-effective, easy to install, and suitable for storing grains, seeds, and feed to meet local demand without heavy capital investment.

China Aluminum Silos Market held a 33.8% share in 2024 and is expected to grow at a CAGR of 7.3% from 2025 to 2034. The country's leadership stems from large-scale agricultural production and the modernization of grain storage infrastructure. Record production levels, exceeding 700 million tonnes in 2024, have reinforced demand for advanced aluminum silos to ensure safe and efficient storage.

Key companies operating in the aluminum silos industry include CST Industries, Bentall Rowlands Storage Systems Ltd., Zeppelin Systems GmbH, Mysilo, SCUTTI S.r.l., Shivvers Manufacturing, SRON Silo Engineering, OBIAL GmbH, Conair Group, G.E. Silos, Symaga, P+W Metallbau GmbH & Co. KG, TSM Control Systems, and Superior Manufacturing. Companies in the Global Aluminum Silos Market are enhancing their foothold through innovation, regional expansion, and sustainability initiatives. Manufacturers are investing in advanced welded and modular designs that ensure superior durability and contamination control. Strategic collaborations with agricultural equipment suppliers and local distributors allow them to expand market reach and provide localized support. Firms are also incorporating eco-friendly and high-recycled-content aluminum to meet environmental standards and appeal to sustainably conscious customers. Continuous R&D efforts focus on automation, temperature and humidity control, and modularity, making silos adaptable for various farm sizes.

Table of Contents

Chapter 1 Methodology and Scope

• 1.1 Market scope and definition
• 1.2 Research design
  • 1.2.1 Research approach
  • 1.2.2 Data collection methods
• 1.3 Data mining sources
  • 1.3.1 Global
  • 1.3.2 Regional/Country
• 1.4 Base estimates and calculations
  • 1.4.1 Base year calculation
  • 1.4.2 Key trends for market estimation
• 1.5 Primary research and validation
  • 1.5.1 Primary sources
• 1.6 Forecast model
• 1.7 Research assumptions and limitations

Chapter 2 Executive Summary

• 2.1 Industry 360° synopsis
• 2.2 Key market trends
  • 2.2.1 Regional
  • 2.2.2 Product type
  • 2.2.3 Aluminum grade
  • 2.2.4 Customization level
  • 2.2.5 Capacity
  • 2.2.6 Mounting configuration
  • 2.2.7 End Use industry
  • 2.2.8 Distribution channel
• 2.3 CXO perspectives: Strategic imperatives
  • 2.3.1 Key decision points for industry executives
  • 2.3.2 Critical success factors for market players
• 2.4 Future outlook and strategic recommendations

Chapter 3 Industry Insights

• 3.1 Industry ecosystem analysis
  • 3.1.1 Supplier landscape
  • 3.1.2 Profit margin
  • 3.1.3 Value addition at each stage
  • 3.1.4 Factor affecting the value chain
• 3.2 Industry impact forces
  • 3.2.1 Growth drivers
  • 3.2.2 Industry pitfalls & challenges
  • 3.2.3 Opportunities
• 3.3 Growth potential analysis
• 3.4 Future market trends
• 3.5 Technology and innovation landscape
  • 3.5.1 Current technological trends
  • 3.5.2 Emerging technologies
• 3.6 Price trends
  • 3.6.1 By region and product type
• 3.7 Regulatory framework
  • 3.7.1 Aluminum Alloy Standards and Specifications
  • 3.7.2 ASTM B209 (Aluminum sheet and plate)
  • 3.7.3 EN 485 (European aluminum standards)
  • 3.7.4 JIS H4000 (Japanese aluminum standards)
  • 3.7.5 Alloy designation system (1xxx to 7xxx series)
• 3.8 Porter's analysis
• 3.9 PESTEL analysis

Chapter 4 Competitive Landscape, 2024

• 4.1 Introduction
• 4.2 Company market share analysis
  • 4.2.1 By region
    • 4.2.1.1 North America
    • 4.2.1.2 Europe
    • 4.2.1.3 Asia Pacific
    • 4.2.1.4 Latin America
    • 4.2.1.5 Middle East and Africa
• 4.3 Company matrix analysis
• 4.4 Competitive analysis of major market players
• 4.5 Competitive positioning matrix
• 4.6 Key developments
  • 4.6.1 Mergers & acquisitions
  • 4.6.2 Partnerships & collaborations
  • 4.6.3 New product launches
  • 4.6.4 Expansion plans

Chapter 5 Market Estimates and Forecast, By Product Type, 2021 - 2034 (USD Million) (Thousand Units)

• 5.1 Key trends
• 5.2 Welded
• 5.3 Bolted/Modular
• 5.4 Hybrid

Chapter 6 Market Estimates and Forecast, By Aluminum Grade, 2021 - 2034 (USD Million) (Thousand Units)

• 6.1 Key trends
• 6.2 5xxx series aluminum alloys (Al-Mg)
  • 6.2.1 Alloy 5083 (Al-Mg 4.5%)
  • 6.2.2 Alloy 5086 (Al-Mg 4.0%)
  • 6.2.3 Alloy 5052 (Al-Mg 2.5%)
  • 6.2.4 Others
• 6.3 6xxx series aluminum alloys (Al-Mg-Si)
  • 6.3.1 Alloy 6061-T6 (Al-Mg-Si Heat-Treated)
  • 6.3.2 Alloy 6063-T6 (Al-Mg-Si Extrusion Grade)
  • 6.3.3 Others
• 6.4 3xxx series aluminum alloys (Al-Mn)
• 6.5 Other aluminum alloys (1xxx, 7xxx)

Chapter 7 Market Estimates and Forecast, By Customization Level, 2021 - 2034 (USD Million) (Thousand Units)

• 7.1 Key trends
• 7.2 Standard/off-the-shelf silos
• 7.3 Custom-engineered silos

Chapter 8 Market Estimates and Forecast, By Capacity, 2021 - 2034 (USD Million) (Thousand Units)

• 8.1 Key trends
• 8.2 Below 100 m3
• 8.3 100-500 m3
• 8.4 500-1000 m3
• 8.5 Above 1000 m3

Chapter 9 Market Estimates and Forecast, By Mounting Configuration, 2021 - 2034 (USD Million) (Thousand Units)

• 9.1 Key trends
• 9.2 Self-supporting aluminum silos
• 9.3 Externally supported aluminum silos
• 9.4 Load-cell supported aluminum silos
• 9.5 Skid-mounted aluminum silos

Chapter 10 Market Estimates and Forecast, By End Use Industry, 2021 - 2034 (USD Million) (Thousand Units)

• 10.1 Key trends
• 10.2 Agriculture
• 10.3 Chemicals
• 10.4 Food processing
• 10.5 Petrochemicals
• 10.6 Pharmaceuticals
• 10.7 Others (paper, paint and coatings, etc.)

Chapter 11 Market Estimates and Forecast, By Distribution Channel, 2021 - 2034 (USD Million) (Thousand Units)

• 11.1 Key trends
• 11.2 Direct sales
• 11.3 Indirect sales

Chapter 12 Market Estimates and Forecast, By Region, 2021 - 2034 (USD Million) (Thousand Units)

• 12.1 Key trends
• 12.2 North America
  • 12.2.1 U.S.
  • 12.2.2 Canada
• 12.3 Europe
  • 12.3.1 Germany
  • 12.3.2 UK
  • 12.3.3 France
  • 12.3.4 Italy
  • 12.3.5 Spain
  • 12.3.6 Netherlands
• 12.4 Asia Pacific
  • 12.4.1 China
  • 12.4.2 Japan
  • 12.4.3 India
  • 12.4.4 Australia
  • 12.4.5 South Korea
• 12.5 Latin America
  • 12.5.1 Brazil
  • 12.5.2 Mexico
  • 12.5.3 Argentina
• 12.6 Middle East and Africa
  • 12.6.1 South Africa
  • 12.6.2 Saudi Arabia
  • 12.6.3 UAE

Chapter 13 Company Profiles

• 13.1 Bentall Rowlands Storage Systems Ltd.
• 13.2 Conair Group
• 13.3 CST Industries
• 13.4 G.E. Silos
• 13.5 Jiangsu Liangyou International Mechanical Engineering
• 13.6 Mysilo
• 13.7 OBIAL GmbH
• 13.8 P+W Metallbau GmbH & Co. KG
• 13.9 SCUTTI S.r.l.
• 13.10 Shivvers Manufacturing
• 13.11 SRON Silo Engineering
• 13.12 Superior Manufacturing
• 13.13 Symaga
• 13.14 TSM Control Systems
• 13.15 Zeppelin Systems GmbH