광업용 3D 프린팅 시장 규모, 점유율, 동향 분석 : 재료별, 용도별, 지역별, 부문별 예측(2025-2033년)

3D Printing In Mining Market Summary

The global 3D printing in mining market size was estimated at USD 367.9 million in 2024 and is projected to reach USD 1,029.6 million by 2033, growing at a CAGR of 12.4% from 2025 to 2033. The adoption of 3D printing in the mining industry is driven by the need to enhance operational efficiency and reduce costs.

Mining operations often rely on complex, customized parts for machinery and equipment. Traditional manufacturing methods can be time-consuming and expensive to produce these parts. 3D printing allows companies to produce components on demand, minimizing downtime and inventory costs while ensuring precise customization for specific machinery requirements.

Sustainability and material optimization are becoming increasingly important in mining, and 3D printing addresses both concerns effectively. Unlike traditional subtractive manufacturing methods, which often generate significant waste, additive manufacturing uses only the material needed to create a part. This reduces scrap material and helps mining companies lower their environmental impact. As regulations and stakeholder expectations push the mining sector toward greener practices, the ability to adopt environmentally responsible manufacturing methods enhances the appeal of 3D printing. The reduced material consumption and energy efficiency associated with additive manufacturing also contribute to cost savings, further supporting its adoption in mining operations.

Technological innovations in 3D printing are expanding the possibilities for its application in mining. Advanced methods, including metal additive manufacturing and high-strength polymer printing, allow the production of durable, heat-resistant, and wear-resistant components suitable for harsh mining environments. These developments ensure critical parts, such as wear plates, drill components, and replacement machinery, can withstand extreme conditions while maintaining performance over time. The durability and precision of 3D-printed components reduce maintenance frequency and extend the lifespan of machinery, contributing to operational efficiency and lowering long-term costs for mining companies.

The mining sector's growing need for rapid prototyping and design flexibility also drives the adoption of 3D printing. Mining equipment and tools are often redesigned to optimize performance, address site-specific challenges, or improve safety. 3D printing allows engineers to quickly produce prototypes and iterate on designs without the long production cycles associated with conventional methods. This capability accelerates innovation and allows companies to experiment on-site with new designs and testing procedures. By shortening the time from concept to implementation, 3D printing supports continuous improvement in mining operations and encourages the development of customized solutions tailored to unique operational needs.

Remote and challenging mining locations present significant logistical challenges, particularly in sourcing replacement parts and critical equipment. 3D printing provides the ability to manufacture components on-site, reducing reliance on external suppliers and complex transportation networks. This on-demand production capability ensures that mining operations can continue without delays caused by supply chain disruptions. 3D printing increases operational resilience, improves equipment uptime, and enhances overall productivity by enabling the local production of essential parts. The ability to maintain uninterrupted operations in remote sites makes 3D printing an increasingly vital technology in the mining sector.

Global 3D Printing in Mining Market Report Segmentation

This report forecasts revenue growth at global, regional, and country levels and provides an analysis of the latest industry trends in each of the sub-segments from 2021 to 2033. For this study, Grand View Research has segmented the global 3D printing in mining market report based on material, end-use, and region.

• Material Outlook (Revenue, USD Million, 2021 - 2033)
• Metals
• Polymers
• Composites
• Ceramics & Geopolymers
• End-use Outlook (Revenue, USD Million, 2021 - 2033)
• Mining Companies
• Equipment OEMs
• Service Providers
• Research Institutes
• Regional Outlook (Revenue, USD Million, 2021 - 2033)
• North America
  • U.S.
  • Canada
  • Mexico
• Europe
  • Germany
  • UK
  • France
• Asia Pacific
  • China
  • India
  • Japan
• Latin America
  • Brazil
• Middle East & Africa
  • Saudi Arabia
  • UAE

Table of Contents

Chapter 1. Methodology and Scope

• 1.1. Market Segmentation & Scope
• 1.2. Market Definition
• 1.3. Information Procurement
  • 1.3.1. Information Analysis
  • 1.3.2. Data Analysis Models
  • 1.3.3. Market Formulation & Data Visualization
  • 1.3.4. Data Validation & Publishing
• 1.4. Research Scope and Assumptions
  • 1.4.1. List of Data Sources

Chapter 2. Executive Summary

• 2.1. Market Outlook
• 2.2. Segmental Outlook
• 2.3. Competitive Outlook

Chapter 3. Market Variables, Trends, and Scope

• 3.1. Market Outlook
• 3.2. Industry Value Chain Analysis
• 3.3. Technology Overview
• 3.4. Regulatory Framework
• 3.5. Market Dynamics
  • 3.5.1. Market Driver Analysis
  • 3.5.2. Market Restraint Analysis
• 3.6. Industry Trends
  • 3.6.1. ESG Analysis
  • 3.6.2. Economic Trends
• 3.7. Porter's Five Forces Analysis
  • 3.7.1. Bargaining Power of Suppliers
  • 3.7.2. Bargaining Power of Buyers
  • 3.7.3. Threat of Substitution
  • 3.7.4. Threat of New Entrants
  • 3.7.5. Competitive Rivalry
• 3.8. PESTLE Analysis
  • 3.8.1. Political
  • 3.8.2. Economic
  • 3.8.3. Social Landscape
  • 3.8.4. Technology
  • 3.8.5. Environmental
  • 3.8.6. Legal

Chapter 4. 3D Printing in Mining Market: Material Estimates & Trend Analysis

• 4.1. 3D Printing in Mining Market: Material Movement Analysis, 2024 & 2033
• 4.2. Metals
  • 4.2.1. Market estimates and forecasts, 2021 - 2033 (USD Million)
• 4.3. Polymers
  • 4.3.1. Market estimates and forecasts, 2021 - 2033 (USD Million)
• 4.4. Composites
  • 4.4.1. Market estimates and forecasts, 2021 - 2033 (USD Million)
• 4.5. Ceramics & Geopolymers
  • 4.5.1. Market estimates and forecasts, 2021 - 2033 (USD Million)

Chapter 5. 3D Printing in Mining Market: End Use Estimates & Trend Analysis

• 5.1. 3D Printing in Mining Market: End Use Movement Analysis, 2024 & 2033
• 5.2. Mining Companies
  • 5.2.1. Market estimates and forecasts, 2021 - 2033 (USD Million)
• 5.3. Equipment OEMs
  • 5.3.1. Market estimates and forecasts, 2021 - 2033 (USD Million)
• 5.4. Service Providers
  • 5.4.1. Market estimates and forecasts, 2021 - 2033 (USD Million)
• 5.5. Research Institutes
  • 5.5.1. Market estimates and forecasts, 2021 - 2033 (USD Million)

Chapter 6. 3D Printing in Mining Market: Regional Estimates & Trend Analysis

• 6.1. Regional Analysis, 2024 & 2033
• 6.2. North America
  • 6.2.1. Market estimates and forecasts, 2021 - 2033 (USD Million)
  • 6.2.2. Market estimates and forecasts, by end use, 2021 - 2033 (USD Million)
  • 6.2.3. Market estimates and forecasts, by material, 2021 - 2033 (USD Million)
  • 6.2.4. U.S.
    • 6.2.4.1. Market estimates and forecasts, 2021 - 2033 (USD Million)
    • 6.2.4.2. Market estimates and forecasts, by end use, 2021 - 2033 (USD Million)
    • 6.2.4.3. Market estimates and forecasts, by material, 2021 - 2033 (USD Million)
  • 6.2.5. Canada
    • 6.2.5.1. Market estimates and forecasts, 2021 - 2033 (USD Million)
    • 6.2.5.2. Market estimates and forecasts, by end use, 2021 - 2033 (USD Million)
    • 6.2.5.3. Market estimates and forecasts, by material, 2021 - 2033 (USD Million)
  • 6.2.6. Mexico
    • 6.2.6.1. Market estimates and forecasts, 2021 - 2033 (USD Million)
    • 6.2.6.2. Market estimates and forecasts, by end use, 2021 - 2033 (USD Million)
    • 6.2.6.3. Market estimates and forecasts, by material, 2021 - 2033 (USD Million)
• 6.3. Europe
  • 6.3.1. Market estimates and forecasts, 2021 - 2033 (USD Million)
  • 6.3.2. Market estimates and forecasts, by end use, 2021 - 2033 (USD Million)
  • 6.3.3. Market estimates and forecasts, by material, 2021 - 2033 (USD Million)
  • 6.3.4. Germany
    • 6.3.4.1. Market estimates and forecasts, 2021 - 2033 (USD Million)
    • 6.3.4.2. Market estimates and forecasts, by end use, 2021 - 2033 (USD Million)
    • 6.3.4.3. Market estimates and forecasts, by material, 2021 - 2033 (USD Million)
  • 6.3.5. UK
    • 6.3.5.1. Market estimates and forecasts, 2021 - 2033 (USD Million)
    • 6.3.5.2. Market estimates and forecasts, by end use, 2021 - 2033 (USD Million)
    • 6.3.5.3. Market estimates and forecasts, by material, 2021 - 2033 (USD Million)
  • 6.3.6. France
    • 6.3.6.1. Market estimates and forecasts, 2021 - 2033 (USD Million)
    • 6.3.6.2. Market estimates and forecasts, by end use, 2021 - 2033 (USD Million)
    • 6.3.6.3. Market estimates and forecasts, by material, 2021 - 2033 (USD Million)
• 6.4. Asia Pacific
  • 6.4.1. Market estimates and forecasts, 2021 - 2033 (USD Million)
  • 6.4.2. Market estimates and forecasts, by end use, 2021 - 2033 (USD Million)
  • 6.4.3. Market estimates and forecasts, by material, 2021 - 2033 (USD Million)
  • 6.4.4. China
    • 6.4.4.1. Market estimates and forecasts, 2021 - 2033 (USD Million)
    • 6.4.4.2. Market estimates and forecasts, by end use, 2021 - 2033 (USD Million)
    • 6.4.4.3. Market estimates and forecasts, by material, 2021 - 2033 (USD Million)
  • 6.4.5. India
    • 6.4.5.1. Market estimates and forecasts, 2021 - 2033 (USD Million)
    • 6.4.5.2. Market estimates and forecasts, by end use, 2021 - 2033 (USD Million)
    • 6.4.5.3. Market estimates and forecasts, by material, 2021 - 2033 (USD Million)
  • 6.4.6. Japan
    • 6.4.6.1. Market estimates and forecasts, 2021 - 2033 (USD Million)
    • 6.4.6.2. Market estimates and forecasts, by end use, 2021 - 2033 (USD Million)
    • 6.4.6.3. Market estimates and forecasts, by material, 2021 - 2033 (USD Million)
• 6.5. Latin America
  • 6.5.1. Market estimates and forecasts, 2021 - 2033 (USD Million)
  • 6.5.2. Market estimates and forecasts, by end use, 2021 - 2033 (USD Million)
  • 6.5.3. Market estimates and forecasts, by material, 2021 - 2033 (USD Million)
  • 6.5.4. Brazil
    • 6.5.4.1. Market estimates and forecasts, 2021 - 2033 (USD Million)
    • 6.5.4.2. Market estimates and forecasts, by end use, 2021 - 2033 (USD Million)
    • 6.5.4.3. Market estimates and forecasts, by material, 2021 - 2033 (USD Million)
• 6.6. Middle East & Africa
  • 6.6.1. Market estimates and forecasts, 2021 - 2033 (USD Million)
  • 6.6.2. Market estimates and forecasts, by end use, 2021 - 2033 (USD Million)
  • 6.6.3. Market estimates and forecasts, by material, 2021 - 2033 (USD Million)
  • 6.6.4. Saudi Arabia
    • 6.6.4.1. Market estimates and forecasts, 2021 - 2033 (USD Million)
    • 6.6.4.2. Market estimates and forecasts, by end use, 2021 - 2033 (USD Million)
    • 6.6.4.3. Market estimates and forecasts, by material, 2021 - 2033 (USD Million)
  • 6.6.5. UAE
    • 6.6.5.1. Market estimates and forecasts, 2021 - 2033 (USD Million)
    • 6.6.5.2. Market estimates and forecasts, by end use, 2021 - 2033 (USD Million)
    • 6.6.5.3. Market estimates and forecasts, by material, 2021 - 2033 (USD Million)

Chapter 7. Competitive Landscape

• 7.1. Recent Developments & Impact Analysis, By Key Market Participants
• 7.2. Company Categorization
• 7.3. Heat Map Analysis
• 7.4. Vendor Landscape
  • 7.4.1. List of distributors
• 7.5. List of prospective end-users
• 7.6. Strategy Initiatives
• 7.7. Company Profiles/Listing
  • 7.7.1. Sandvik Mining and Rock Solutions
    • 7.7.1.1. Company Overview
    • 7.7.1.2. Financial Performance
    • 7.7.1.3. Product Benchmarking
  • 7.7.2. Boliden AB
    • 7.7.2.1. Company Overview
    • 7.7.2.2. Financial Performance
    • 7.7.2.3. Product Benchmarking
  • 7.7.3. FLSmidth
    • 7.7.3.1. Company Overview
    • 7.7.3.2. Financial Performance
    • 7.7.3.3. Product Benchmarking
  • 7.7.4. Caterpillar Inc.
    • 7.7.4.1. Company Overview
    • 7.7.4.2. Financial Performance
    • 7.7.4.3. Product Benchmarking
  • 7.7.5. Epiroc
    • 7.7.5.1. Company Overview
    • 7.7.5.2. Financial Performance
    • 7.7.5.3. Product Benchmarking
  • 7.7.6. Fortescue Metals Group
    • 7.7.6.1. Company Overview
    • 7.7.6.2. Financial Performance
    • 7.7.6.3. Product Benchmarking
  • 7.7.7. Nornickel
    • 7.7.7.1. Company Overview
    • 7.7.7.2. Financial Performance
    • 7.7.7.3. Product Benchmarking
  • 7.7.8. TheSteelPrinters
    • 7.7.8.1. Company Overview
    • 7.7.8.2. Financial Performance
    • 7.7.8.3. Product Benchmarking
  • 7.7.9. AML3D
    • 7.7.9.1. Company Overview
    • 7.7.9.2. Financial Performance
    • 7.7.9.3. Product Benchmarking
  • 7.7.10. Global3D
    • 7.7.10.1. Company Overview
    • 7.7.10.2. Financial Performance
    • 7.7.10.3. Product Benchmarking