세계의 전자 세라믹 시장 규모, 점유율, 동향, 예측 : 재료, 용도, 최종사용자, 지역별(2025-2033년)

The global electronic ceramics market size was valued at USD 13.9 Billion in 2024. Looking forward, IMARC Group estimates the market to reach USD 21.2 Billion by 2033, exhibiting a CAGR of 4.8% during 2025-2033. Asia-Pacific currently dominates the market, holding a significant market share of over 48.7% in 2024. The market is driven by rising demand for advanced electronic devices, including smartphones, wearables, and IoT systems. Significant growth in 5G technology, renewable energy solutions, and electric vehicles is further propelling demand for high-performance ceramics due to their superior thermal, mechanical, and electrical properties.

Electronic ceramics refer to materials that are primarily used for performing electronic functions for a particular application. Ferroelectric, piezoceramics, dielectric and conductive are some of the commonly available types of electro ceramics. They consist of ferrite-based permanent magnets and circuit devices that generate an electrical charge when pressure is applied under an electric field. They are widely used in electrical, optical, and magnetic applications. Radio-frequency identification (RFID), microelectromechanical systems (MEMs), multilayer ceramic capacitors (MLCCs), noise filters, sensors, and actuators are some of the components made of electro ceramics. As compared to traditional materials, electronic ceramic products exhibit enhanced electrical conductivity, higher strength, thermal and corrosion stability, and improved wear and chemical resistance. As a result, they are widely used across automotive, healthcare, telecommunication and electronic industries.

Electronic Ceramics Market Trends:

The significant growth in the aerospace industry across the globe is creating a positive outlook for the market. In line with this, electronic ceramics are used in sensors, lighting, high-intensity discharge lamps, light-emitting diodes (LEDs), laser lighting systems and antenna components of unpowered gliders and sailplanes, unmanned aerial vehicles (UAVs), and lighter-than-air crafts. Additionally, the widespread product incorporation in different consumer electronics, such as cell phones, computers and controllers for signal reception and voice transmission purposes, is favoring the market growth. Apart from this, the introduction of lightweight and high-performance electronic ceramics that exhibit greater density, thermal shock resistance, toughness, hardness, and chemical and wear resistance, are providing an impetus to the market growth. Moreover, the increasing utilization of electronic ceramics in diagnostic imaging and robotic surgical tools that need precision functionality is positively impacting the market growth. Other factors, including the increasing product demand in the automotive sector, are anticipated to drive the market further toward growth.

Key Market Segmentation:

Breakup by Material:

• Alumina
• Zirconia
• Silica
• Others

Breakup by Application:

• Capacitors
• Data Storage Devices
• Optoelectronic Devices
• Actuators and Sensors
• Power Distribution Devices
• Others

Breakup by End User:

• Electronics
• Automobile
• Medical
• Aerospace and Defense
• Others

Breakup by Region:

• North America
• United States
• Canada
• Asia-Pacific
• China
• Japan
• India
• South Korea
• Australia
• Indonesia
• Others
• Europe
• Germany
• France
• United Kingdom
• Italy
• Spain
• Russia
• Others
• Latin America
• Brazil
• Mexico
• Others
• Middle East and Africa

Competitive Landscape:

The competitive landscape of the industry has also been examined along with the profiles of the key players being Almatis GmbH, American Elements, APC International Ltd., Central Electronics Limited, CeramTec GmbH, Compagnie de Saint-Gobain S.A., CoorsTek Inc., Ferro Corporation, Ishihara Sangyo Kaisha Ltd., Noritake Co. Limited, Physik Instrumente (PI) GmbH & Co. KG., Sensor Technology Ltd. and Venator Materials PLC (Huntsman Corporation).

Key Questions Answered in This Report

• 1.What are electronic ceramics?
• 2.How big is the global electronic ceramics market?
• 3.What is the expected growth rate of the global electronic ceramics market during 2025-2033?
• 4.What are the key factors driving the global electronic ceramics market?
• 5.What is the leading segment of the global electronic ceramics market based on material application end user?
• 6.What is the leading segment of the global electronic ceramics market based on material application end user?
• 7.What is the leading segment of the global electronic ceramics market based on end user?
• 8.What are the key regions in the global electronic ceramics market?
• 9.Who are the key players/companies in the global electronic ceramics market?

Table of Contents

1 Preface

2 Scope and Methodology

• 2.1 Objectives of the Study
• 2.2 Stakeholders
• 2.3 Data Sources
  • 2.3.1 Primary Sources
  • 2.3.2 Secondary Sources
• 2.4 Market Estimation
  • 2.4.1 Bottom-Up Approach
  • 2.4.2 Top-Down Approach
• 2.5 Forecasting Methodology

3 Executive Summary

4 Introduction

• 4.1 Overview
• 4.2 Key Industry Trends

5 Global Electronic Ceramics Market

• 5.1 Market Overview
• 5.2 Market Performance
• 5.3 Impact of COVID-19
• 5.4 Market Forecast

6 Market Breakup by Material

• 6.1 Alumina
  • 6.1.1 Market Trends
  • 6.1.2 Market Forecast
• 6.2 Zirconia
  • 6.2.1 Market Trends
  • 6.2.2 Market Forecast
• 6.3 Silica
  • 6.3.1 Market Trends
  • 6.3.2 Market Forecast
• 6.4 Others
  • 6.4.1 Market Trends
  • 6.4.2 Market Forecast

7 Market Breakup by Application

• 7.1 Capacitors
  • 7.1.1 Market Trends
  • 7.1.2 Market Forecast
• 7.2 Data Storage Devices
  • 7.2.1 Market Trends
  • 7.2.2 Market Forecast
• 7.3 Optoelectronic Devices
  • 7.3.1 Market Trends
  • 7.3.2 Market Forecast
• 7.4 Actuators and Sensors
  • 7.4.1 Market Trends
  • 7.4.2 Market Forecast
• 7.5 Power Distribution Devices
  • 7.5.1 Market Trends
  • 7.5.2 Market Forecast
• 7.6 Others
  • 7.6.1 Market Trends
  • 7.6.2 Market Forecast

8 Market Breakup by End User

• 8.1 Electronics
  • 8.1.1 Market Trends
  • 8.1.2 Market Forecast
• 8.2 Automobile
  • 8.2.1 Market Trends
  • 8.2.2 Market Forecast
• 8.3 Medical
  • 8.3.1 Market Trends
  • 8.3.2 Market Forecast
• 8.4 Aerospace and Defense
  • 8.4.1 Market Trends
  • 8.4.2 Market Forecast
• 8.5 Others
  • 8.5.1 Market Trends
  • 8.5.2 Market Forecast

9 Market Breakup by Region

• 9.1 North America
  • 9.1.1 United States
    • 9.1.1.1 Market Trends
    • 9.1.1.2 Market Forecast
  • 9.1.2 Canada
    • 9.1.2.1 Market Trends
    • 9.1.2.2 Market Forecast
• 9.2 Asia-Pacific
  • 9.2.1 China
    • 9.2.1.1 Market Trends
    • 9.2.1.2 Market Forecast
  • 9.2.2 Japan
    • 9.2.2.1 Market Trends
    • 9.2.2.2 Market Forecast
  • 9.2.3 India
    • 9.2.3.1 Market Trends
    • 9.2.3.2 Market Forecast
  • 9.2.4 South Korea
    • 9.2.4.1 Market Trends
    • 9.2.4.2 Market Forecast
  • 9.2.5 Australia
    • 9.2.5.1 Market Trends
    • 9.2.5.2 Market Forecast
  • 9.2.6 Indonesia
    • 9.2.6.1 Market Trends
    • 9.2.6.2 Market Forecast
  • 9.2.7 Others
    • 9.2.7.1 Market Trends
    • 9.2.7.2 Market Forecast
• 9.3 Europe
  • 9.3.1 Germany
    • 9.3.1.1 Market Trends
    • 9.3.1.2 Market Forecast
  • 9.3.2 France
    • 9.3.2.1 Market Trends
    • 9.3.2.2 Market Forecast
  • 9.3.3 United Kingdom
    • 9.3.3.1 Market Trends
    • 9.3.3.2 Market Forecast
  • 9.3.4 Italy
    • 9.3.4.1 Market Trends
    • 9.3.4.2 Market Forecast
  • 9.3.5 Spain
    • 9.3.5.1 Market Trends
    • 9.3.5.2 Market Forecast
  • 9.3.6 Russia
    • 9.3.6.1 Market Trends
    • 9.3.6.2 Market Forecast
  • 9.3.7 Others
    • 9.3.7.1 Market Trends
    • 9.3.7.2 Market Forecast
• 9.4 Latin America
  • 9.4.1 Brazil
    • 9.4.1.1 Market Trends
    • 9.4.1.2 Market Forecast
  • 9.4.2 Mexico
    • 9.4.2.1 Market Trends
    • 9.4.2.2 Market Forecast
  • 9.4.3 Others
    • 9.4.3.1 Market Trends
    • 9.4.3.2 Market Forecast
• 9.5 Middle East and Africa
  • 9.5.1 Market Trends
  • 9.5.2 Market Breakup by Country
  • 9.5.3 Market Forecast

10 SWOT Analysis

• 10.1 Overview
• 10.2 Strengths
• 10.3 Weaknesses
• 10.4 Opportunities
• 10.5 Threats

11 Value Chain Analysis

12 Porters Five Forces Analysis

• 12.1 Overview
• 12.2 Bargaining Power of Buyers
• 12.3 Bargaining Power of Suppliers
• 12.4 Degree of Competition
• 12.5 Threat of New Entrants
• 12.6 Threat of Substitutes

13 Price Analysis

14 Competitive Landscape

• 14.1 Market Structure
• 14.2 Key Players
• 14.3 Profiles of Key Players
  • 14.3.1 Almatis GmbH
    • 14.3.1.1 Company Overview
    • 14.3.1.2 Product Portfolio
  • 14.3.2 American Elements
    • 14.3.2.1 Company Overview
    • 14.3.2.2 Product Portfolio
  • 14.3.3 APC International Ltd.
    • 14.3.3.1 Company Overview
    • 14.3.3.2 Product Portfolio
  • 14.3.4 Central Electronics Limited
    • 14.3.4.1 Company Overview
    • 14.3.4.2 Product Portfolio
  • 14.3.5 CeramTec GmbH
    • 14.3.5.1 Company Overview
    • 14.3.5.2 Product Portfolio
  • 14.3.6 Compagnie de Saint-Gobain S.A.
    • 14.3.6.1 Company Overview
    • 14.3.6.2 Product Portfolio
    • 14.3.6.3 Financials
    • 14.3.6.4 SWOT Analysis
  • 14.3.7 CoorsTek Inc.
    • 14.3.7.1 Company Overview
    • 14.3.7.2 Product Portfolio
  • 14.3.8 Ferro Corporation
    • 14.3.8.1 Company Overview
    • 14.3.8.2 Product Portfolio
    • 14.3.8.3 Financials
    • 14.3.8.4 SWOT Analysis
  • 14.3.9 Ishihara Sangyo Kaisha Ltd.
    • 14.3.9.1 Company Overview
    • 14.3.9.2 Product Portfolio
    • 14.3.9.3 Financials
    • 14.3.9.4 SWOT Analysis
  • 14.3.10 Noritake Co. Limited
    • 14.3.10.1 Company Overview
    • 14.3.10.2 Product Portfolio
    • 14.3.10.3 Financials
  • 14.3.11 Physik Instrumente (PI) GmbH & Co. KG.
    • 14.3.11.1 Company Overview
    • 14.3.11.2 Product Portfolio
  • 14.3.12 Sensor Technology Ltd.
    • 14.3.12.1 Company Overview
    • 14.3.12.2 Product Portfolio
  • 14.3.13 Venator Materials PLC (Huntsman Corporation)
    • 14.3.13.1 Company Overview
    • 14.3.13.2 Product Portfolio
    • 14.3.13.3 Financials