|
시장보고서
상품코드
2024784
숏크리트 시장 보고서 : 공법, 용도, 시스템, 지역별(2026-2034년)Shotcrete Market Report by Technique (Wet Mix, Dry Mix), Application (Underground Construction, Water Retaining Structures, Protective Coatings, Repair Works), System (Manual System, Robotic Spraying System), and Region 2026-2034 |
||||||
숏크리트 세계 시장 규모는 2025년에 104억 달러에 이르렀습니다. 2034년까지 시장 규모가 181억 달러에 이르고, 2026-2034년 CAGR6.17%를 나타낼 것으로 예측했습니다.
숏크리트(Shotcrete)는 시멘트와 골재를 혼합한 특수한 재료로, 천장이나 수직면의 건축용도로 사용됩니다. 이는 밀폐된 내압 호스를 통해 기판 표면에 고속으로 압축 및 분사됩니다. 타설 콘크리트는 수동 및 로봇 시스템을 이용하여 습식 및 건식 혼합으로 시공할 수 있습니다. 드라이믹스는 건축자재를 특정 비율로 혼합하여 호스나 파이프를 통해 공기 압축기로 이송하는 방식으로 제조됩니다. 이 혼합물은 우수한 유연성, 내구성, 기계적 강도 및 압축 강도, 낮은 투수성이 특징입니다. 습식 믹스는 시멘트에 물을 첨가하여 제조되며, 높은 시공 능력으로 장식적인 마무리를 제공하는 데 사용됩니다. 또한, 기능성을 높이기 위해 실리카퓸, 에어베이스 혼화제, 섬유, 경화촉진제 등이 혼합되어 있습니다. 샷크리트는 지하 구조물, 보수 공사 및 보호 코팅에 널리 사용됩니다.
숏크리트 시장 동향 :
세계 건설 산업의 괄목할만한 성장은 시장 전망을 밝게 만드는 주요 요인 중 하나입니다. 숏크리트는 저수 구조물 및 자유 발포 구조물, 쉘 지붕, 돔, 배럴형 아치, 방폭 구조물 및 챔버 라이닝의 개발에 널리 사용됩니다. 또한, 특히 개발도상국의 지하 교통 시스템 개발 확대가 시장 성장을 견인할 것으로 예측됩니다. 숏크리트는 암반의 안정화에 기여하며, 각종 터널 공사 및 광산 활동에서 아치 내벽 및 대규모 공동 충진에 활용되고 있습니다. 이에 따라 운하벽, 도로, 교량, 댐, 천연암벽 등 수직면 콘크리트 보수에 대한 숏크리트 보급도 시장 성장에 기여하고 있습니다. 인프라 개발을 촉진하기 위한 정부의 우호적인 정책 시행, 지속 가능한 분사 콘크리트 재료 생산 등 다른 요인들도 시장 성장을 견인할 것으로 예측됩니다.
본 보고서에서 답변을 얻을 수 있는 주요 질문
- 지금까지 세계 샷크리트 시장은 어떤 추세를 보여 왔으며, 향후 몇 년 동안 어떻게 변화할 것인가?
- 코로나19가 세계 숏크리트 시장에 어떤 영향을 미쳤는가?
- 주요 지역 시장은?
- 기술별로 보면, 시장 분석은 어떻게 이루어지나요?
- 용도별 시장 현황은?
- 시스템별 시장 현황은?
- 이 산업의 가치사슬에서 각 단계는 어떤 역할을 하는가?
- 이 산업의 주요 촉진요인과 과제는?
- 세계 숏크리트 시장의 구조는 무엇이며, 주요 기업은?
- 이 업계의 경쟁은 얼마나 치열합니까?
목차
제1장 서문
제2장 조사 범위와 조사 방법
제3장 주요 요약
제4장 서론
제5장 세계의 숏크리트 시장
제6장 시장 분석 : 방법별
제7장 시장 분석 : 용도별
제8장 시장 분석 : 시스템별
제9장 시장 분석 : 지역별
제10장 SWOT 분석
제11장 밸류체인 분석
제12장 Porter의 Five Forces 분석
제13장 가격 분석
제14장 경쟁 구도
LSHThe global shotcrete market size reached USD 10.4 Billion in 2025. Looking forward, IMARC Group expects the market to reach USD 18.1 Billion by 2034, exhibiting a growth rate (CAGR) of 6.17% during 2026-2034.
Shotcrete, or sprayed concrete, is a specialized mixture of cement and aggregate used for overhead and vertical construction applications. It is compressed and sprayed on the surface of the substrate through a sealed and pressure-resistance hose at high velocity. Shotcrete can be applied using both wet and dry mixes through manual and robotic systems. The dry mix is prepared by blending the construction materials in a specific ratio and transferring it to an air compressor through a hose or a pipe. This mix offers enhanced flexibility, durability, mechanical and compressive strength and low water permeability. The wet mix is prepared by adding water to the cement and is used to provide a decorative finish with high output capacity. Shotcrete is also mixed with silica fume, air-based admixtures, fibers and accelerators for enhanced functional properties. It is widely used for underground constructions, repairs and protective coatings.
SHOTCRETE MARKET TRENDS:
Significant growth in the construction industry across the globe is among the key factors creating a positive outlook for the market. Shotcrete is widely used for the development of water-retaining and free-foamed structures, shell roofs, domes, barrel vaulting, blast-proof constructions and chamber linings. Moreover, the increasing development of unground transport systems, especially in the developing economies, is anticipated to drive the market toward growth. Shotcrete aids in rock stabilization and provides arch linings and large cavity fillings for various tunneling and mining activities. In line with this, the widespread adoption of shotcrete for concrete repairs on vertical surfaces of canal walls, roads, bridges, dams and natural rock walls is also contributing to the market growth. Other factors, including the implementation of favorable government policies promoting infrastructural development, along with the production of sustainable shotcrete materials, are anticipated to drive the market toward growth.
KEY MARKET SEGMENTATION:
Breakup by Technique:
- Wet Mix
- Dry Mix
Breakup by Application:
- Underground Construction
- Water Retaining Structures
- Protective Coatings
- Repair Works
Breakup by System:
- Manual System
- Robotic Spraying System
Breakup by Region:
- North America
- United States
- Canada
- Asia-Pacific
- China
- Japan
- India
- South Korea
- Australia
- Indonesia
- Others
- Europe
- Germany
- France
- United Kingdom
- Italy
- Spain
- Russia
- Others
- Latin America
- Brazil
- Mexico
- Others
- Middle East and Africa
COMPETITIVE LANDSCAPE:
The competitive landscape of the industry has also been examined along with the profiles of the key players being BASF SE, CEMEX S.A.B. de C.V., GCP Applied Technologies Inc, HeidelbergCement AG, Holcim, LKAB Berg & Betong AB, Sika AG, The Euclid Chemical Company (RPM International Inc), The QUIKRETE Companies and U.S. Concrete.
KEY QUESTIONS ANSWERED IN THIS REPORT
- How has the global shotcrete market performed so far and how will it perform in the coming years?
- What has been the impact of COVID-19 on the global shotcrete market?
- What are the key regional markets?
- What is the breakup of the market based on the technique?
- What is the breakup of the market based on the application?
- What is the breakup of the market based on the system?
- What are the various stages in the value chain of the industry?
- What are the key driving factors and challenges in the industry?
- What is the structure of the global shotcrete market and who are the key players?
- What is the degree of competition in the industry?
Table of Contents
1 Preface
2 Scope and Methodology
- 2.1 Objectives of the Study
- 2.2 Stakeholders
- 2.3 Data Sources
- 2.3.1 Primary Sources
- 2.3.2 Secondary Sources
- 2.4 Market Estimation
- 2.4.1 Bottom-Up Approach
- 2.4.2 Top-Down Approach
- 2.5 Forecasting Methodology
3 Executive Summary
4 Introduction
- 4.1 Overview
- 4.2 Key Industry Trends
5 Global Shotcrete Market
- 5.1 Market Overview
- 5.2 Market Performance
- 5.3 Impact of COVID-19
- 5.4 Market Forecast
6 Market Breakup by Technique
- 6.1 Wet Mix
- 6.1.1 Market Trends
- 6.1.2 Market Forecast
- 6.2 Dry Mix
- 6.2.1 Market Trends
- 6.2.2 Market Forecast
7 Market Breakup by Application
- 7.1 Underground Construction
- 7.1.1 Market Trends
- 7.1.2 Market Forecast
- 7.2 Water Retaining Structures
- 7.2.1 Market Trends
- 7.2.2 Market Forecast
- 7.3 Protective Coatings
- 7.3.1 Market Trends
- 7.3.2 Market Forecast
- 7.4 Repair Works
- 7.4.1 Market Trends
- 7.4.2 Market Forecast
8 Market Breakup by System
- 8.1 Manual System
- 8.1.1 Market Trends
- 8.1.2 Market Forecast
- 8.2 Robotic Spraying System
- 8.2.1 Market Trends
- 8.2.2 Market Forecast
9 Market Breakup by Region
- 9.1 North America
- 9.1.1 United States
- 9.1.1.1 Market Trends
- 9.1.1.2 Market Forecast
- 9.1.2 Canada
- 9.1.2.1 Market Trends
- 9.1.2.2 Market Forecast
- 9.1.1 United States
- 9.2 Asia-Pacific
- 9.2.1 China
- 9.2.1.1 Market Trends
- 9.2.1.2 Market Forecast
- 9.2.2 Japan
- 9.2.2.1 Market Trends
- 9.2.2.2 Market Forecast
- 9.2.3 India
- 9.2.3.1 Market Trends
- 9.2.3.2 Market Forecast
- 9.2.4 South Korea
- 9.2.4.1 Market Trends
- 9.2.4.2 Market Forecast
- 9.2.5 Australia
- 9.2.5.1 Market Trends
- 9.2.5.2 Market Forecast
- 9.2.6 Indonesia
- 9.2.6.1 Market Trends
- 9.2.6.2 Market Forecast
- 9.2.7 Others
- 9.2.7.1 Market Trends
- 9.2.7.2 Market Forecast
- 9.2.1 China
- 9.3 Europe
- 9.3.1 Germany
- 9.3.1.1 Market Trends
- 9.3.1.2 Market Forecast
- 9.3.2 France
- 9.3.2.1 Market Trends
- 9.3.2.2 Market Forecast
- 9.3.3 United Kingdom
- 9.3.3.1 Market Trends
- 9.3.3.2 Market Forecast
- 9.3.4 Italy
- 9.3.4.1 Market Trends
- 9.3.4.2 Market Forecast
- 9.3.5 Spain
- 9.3.5.1 Market Trends
- 9.3.5.2 Market Forecast
- 9.3.6 Russia
- 9.3.6.1 Market Trends
- 9.3.6.2 Market Forecast
- 9.3.7 Others
- 9.3.7.1 Market Trends
- 9.3.7.2 Market Forecast
- 9.3.1 Germany
- 9.4 Latin America
- 9.4.1 Brazil
- 9.4.1.1 Market Trends
- 9.4.1.2 Market Forecast
- 9.4.2 Mexico
- 9.4.2.1 Market Trends
- 9.4.2.2 Market Forecast
- 9.4.3 Others
- 9.4.3.1 Market Trends
- 9.4.3.2 Market Forecast
- 9.4.1 Brazil
- 9.5 Middle East and Africa
- 9.5.1 Market Trends
- 9.5.2 Market Breakup by Country
- 9.5.3 Market Forecast
10 SWOT Analysis
- 10.1 Overview
- 10.2 Strengths
- 10.3 Weaknesses
- 10.4 Opportunities
- 10.5 Threats
11 Value Chain Analysis
12 Porters Five Forces Analysis
- 12.1 Overview
- 12.2 Bargaining Power of Buyers
- 12.3 Bargaining Power of Suppliers
- 12.4 Degree of Competition
- 12.5 Threat of New Entrants
- 12.6 Threat of Substitutes
13 Price Analysis
14 Competitive Landscape
- 14.1 Market Structure
- 14.2 Key Players
- 14.3 Profiles of Key Players
- 14.3.1 BASF SE
- 14.3.1.1 Company Overview
- 14.3.1.2 Product Portfolio
- 14.3.1.3 Financials
- 14.3.1.4 SWOT Analysis
- 14.3.2 CEMEX S.A.B. de C.V.
- 14.3.2.1 Company Overview
- 14.3.2.2 Product Portfolio
- 14.3.2.3 Financials
- 14.3.2.4 SWOT Analysis
- 14.3.3 GCP Applied Technologies Inc
- 14.3.3.1 Company Overview
- 14.3.3.2 Product Portfolio
- 14.3.3.3 Financials
- 14.3.4 HeidelbergCement AG
- 14.3.4.1 Company Overview
- 14.3.4.2 Product Portfolio
- 14.3.4.3 Financials
- 14.3.5 Holcim
- 14.3.5.1 Company Overview
- 14.3.5.2 Product Portfolio
- 14.3.5.3 Financials
- 14.3.5.4 SWOT Analysis
- 14.3.6 LKAB Berg & Betong AB
- 14.3.6.1 Company Overview
- 14.3.6.2 Product Portfolio
- 14.3.7 Sika AG
- 14.3.7.1 Company Overview
- 14.3.7.2 Product Portfolio
- 14.3.7.3 Financials
- 14.3.8 The Euclid Chemical Company (RPM International Inc)
- 14.3.8.1 Company Overview
- 14.3.8.2 Product Portfolio
- 14.3.9 The QUIKRETE Companies
- 14.3.9.1 Company Overview
- 14.3.9.2 Product Portfolio
- 14.3.10 U.S. Concrete
- 14.3.10.1 Company Overview
- 14.3.10.2 Product Portfolio
- 14.3.10.3 Financials
- 14.3.1 BASF SE
