세계의 자동차용 클러치 시장 : 클러치 디스크 사이즈, 클러치 유형, 소재 유형, 유통 채널, 차종별 예측(2025-2030년)

The Automotive Clutch Market was valued at USD 6.46 billion in 2023, expected to reach USD 6.88 billion in 2024, and is projected to grow at a CAGR of 6.75%, to USD 10.21 billion by 2030.

The scope and definition of the automotive clutch market involve its integral role in the transmission system of vehicles, facilitating smooth engagement and disengagement between the engine and gearbox. The necessity revolves around the clutch's ability to provide smooth vehicle operation, increased fuel efficiency, and reduced emissions, catering to both manual and automatic transmissions. Its applications span across passenger cars, commercial vehicles, and heavy-duty vehicles, widely demanded due to increasing vehicle production and technological advancements. End-use scope primarily includes OEMs (Original Equipment Manufacturers) and aftermarket sectors. Key influencing growth factors include the global increase in vehicle production, the rising consumer preference for electric and automated vehicles, and advancements in clutch technology like dual-clutch and hydroelectric systems. These trends are propelled by stringent environmental regulations and the shift towards electric vehicles (EVs), presenting potential opportunities for innovations in energy-efficient and eco-friendly clutch technologies. Investing in research for lightweight materials and electronics integration in clutch assemblies could open new market avenues. However, challenges such as the high cost of advanced clutch systems, complex manufacturing processes, and market saturation in developed regions hamper growth. There's potential in emerging markets like Asia-Pacific, where increasing urbanization and disposable incomes are driving vehicle sales. The market is primarily competitive and fragmented, with innovations focused on enhancing performance and durability. To seize potential opportunities, stakeholders should focus on advanced materials that offer high strength-to-weight ratios, invest in smart clutch systems applicable to hybrid and electric vehicles, and regional expansion in high-growth markets. Additionally, overcoming limitations such as addressing consumer preferences shift towards EVs, which may bypass traditional clutch requirements, can be pivotal. Ensuring focus on efficiency and sustainability in product offerings could markedly influence success in this dynamically evolving market landscape.

Market Dynamics: Unveiling Key Market Insights in the Rapidly Evolving Automotive Clutch Market

The Automotive Clutch Market is undergoing transformative changes driven by a dynamic interplay of supply and demand factors. Understanding these evolving market dynamics prepares business organizations to make informed investment decisions, refine strategic decisions, and seize new opportunities. By gaining a comprehensive view of these trends, business organizations can mitigate various risks across political, geographic, technical, social, and economic domains while also gaining a clearer understanding of consumer behavior and its impact on manufacturing costs and purchasing trends.

• Market Drivers
  • Growing automotive production and sales worldwide and need for improved dual-clutch transmission systems
  • Strict government rules for vehicle safety and standards for the safety of clutch system
• Market Restraints
  • Technical and operational limitations of automotive clutch
• Market Opportunities
  • Advancements in clutch designs and rise of clutch automation system
  • Expansion of automotive aftermarket and availability of new aftermarket clutch kits
• Market Challenges
  • Design complexities associated with manufacturing automotive clutch

Porter's Five Forces: A Strategic Tool for Navigating the Automotive Clutch Market

Porter's five forces framework is a critical tool for understanding the competitive landscape of the Automotive Clutch Market. It offers business organizations with a clear methodology for evaluating their competitive positioning and exploring strategic opportunities. This framework helps businesses assess the power dynamics within the market and determine the profitability of new ventures. With these insights, business organizations can leverage their strengths, address weaknesses, and avoid potential challenges, ensuring a more resilient market positioning.

PESTLE Analysis: Navigating External Influences in the Automotive Clutch Market

External macro-environmental factors play a pivotal role in shaping the performance dynamics of the Automotive Clutch Market. Political, Economic, Social, Technological, Legal, and Environmental factors analysis provides the necessary information to navigate these influences. By examining PESTLE factors, businesses can better understand potential risks and opportunities. This analysis enables business organizations to anticipate changes in regulations, consumer preferences, and economic trends, ensuring they are prepared to make proactive, forward-thinking decisions.

Market Share Analysis: Understanding the Competitive Landscape in the Automotive Clutch Market

A detailed market share analysis in the Automotive Clutch Market provides a comprehensive assessment of vendors' performance. Companies can identify their competitive positioning by comparing key metrics, including revenue, customer base, and growth rates. This analysis highlights market concentration, fragmentation, and trends in consolidation, offering vendors the insights required to make strategic decisions that enhance their position in an increasingly competitive landscape.

FPNV Positioning Matrix: Evaluating Vendors' Performance in the Automotive Clutch Market

The Forefront, Pathfinder, Niche, Vital (FPNV) Positioning Matrix is a critical tool for evaluating vendors within the Automotive Clutch Market. This matrix enables business organizations to make well-informed decisions that align with their goals by assessing vendors based on their business strategy and product satisfaction. The four quadrants provide a clear and precise segmentation of vendors, helping users identify the right partners and solutions that best fit their strategic objectives.

Strategy Analysis & Recommendation: Charting a Path to Success in the Automotive Clutch Market

A strategic analysis of the Automotive Clutch Market is essential for businesses looking to strengthen their global market presence. By reviewing key resources, capabilities, and performance indicators, business organizations can identify growth opportunities and work toward improvement. This approach helps businesses navigate challenges in the competitive landscape and ensures they are well-positioned to capitalize on newer opportunities and drive long-term success.

Key Company Profiles

The report delves into recent significant developments in the Automotive Clutch Market, highlighting leading vendors and their innovative profiles. These include Aisin Seiki Co., Ltd., Apls Automotive Industries Pvt. Ltd., BLM Automatic Clutch, BorgWarner Inc., Brunel Corporation, Centerforce Performance Clutch, Clutch Engineering Co., Coremo Ocmea S.p.A., DESCH Antriebstechnik GmbH & Co. KG, Eaton Corporation, Exedy Corporation, FCC CLUTCH INDIA PVT. LTD., Ford Motor Company, Formsprag Clutch, General Motors Company, Honda Motor Company, Ltd., Hyundai Motor Company, JATCO Ltd., Kendrion N.V., Kia Motor Corporation, Logan Clutch Corporation, Mahindra & Mahindra Limited, Mod E-Tech Engineering Pvt Ltd., MODIMAZ Engineers, Nissan Motor Co., Ltd., NSK Ltd., Ogura Industrial Corp., Pethe Industrial Marketing Company Pvt. Ltd., Pitteri Violini S.p.A., Schaeffler AG, SINFONIA TECHNOLOGY (THAILAND) CO., LTD., The Carlyle Johnson Machine Company, LLC, Valeo SA, Wichita Clutch, and Yamaha Motor Co., Ltd..

Market Segmentation & Coverage

This research report categorizes the Automotive Clutch Market to forecast the revenues and analyze trends in each of the following sub-markets:

• Based on Clutch Disc Size, market is studied across 10 to 11 Inches Disc, 11 Inches & Above Disc, 9 to 10 Inches Disc, and Below 9 Inches Disc.
• Based on Clutch Type, market is studied across Electromagnetic Clutch, Friction Clutch, Hydraulic clutch, and Positive Clutch. The Friction Clutch is further studied across Centrifugal Clutch, Cone Clutch, and Plate. The Plate is further studied across Multi-plate Clutch and Single Plate Clutch. The Positive Clutch is further studied across Dog Clutch and Spline Clutch.
• Based on Material Type, market is studied across Metal and Non-metal.
• Based on Distribution Channel, market is studied across Aftermarket and OEM.
• Based on Vehicle Type, market is studied across Commercial Vehicles and Passenger Vehicles.
• Based on Region, market is studied across Americas, Asia-Pacific, and Europe, Middle East & Africa. The Americas is further studied across Argentina, Brazil, Canada, Mexico, and United States. The United States is further studied across California, Florida, Illinois, New York, Ohio, Pennsylvania, and Texas. The Asia-Pacific is further studied across Australia, China, India, Indonesia, Japan, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, and Vietnam. The Europe, Middle East & Africa is further studied across Denmark, Egypt, Finland, France, Germany, Israel, Italy, Netherlands, Nigeria, Norway, Poland, Qatar, Russia, Saudi Arabia, South Africa, Spain, Sweden, Switzerland, Turkey, United Arab Emirates, and United Kingdom.

The report offers a comprehensive analysis of the market, covering key focus areas:

1. Market Penetration: A detailed review of the current market environment, including extensive data from top industry players, evaluating their market reach and overall influence.

2. Market Development: Identifies growth opportunities in emerging markets and assesses expansion potential in established sectors, providing a strategic roadmap for future growth.

3. Market Diversification: Analyzes recent product launches, untapped geographic regions, major industry advancements, and strategic investments reshaping the market.

4. Competitive Assessment & Intelligence: Provides a thorough analysis of the competitive landscape, examining market share, business strategies, product portfolios, certifications, regulatory approvals, patent trends, and technological advancements of key players.

5. Product Development & Innovation: Highlights cutting-edge technologies, R&D activities, and product innovations expected to drive future market growth.

The report also answers critical questions to aid stakeholders in making informed decisions:

1. What is the current market size, and what is the forecasted growth?

2. Which products, segments, and regions offer the best investment opportunities?

3. What are the key technology trends and regulatory influences shaping the market?

4. How do leading vendors rank in terms of market share and competitive positioning?

5. What revenue sources and strategic opportunities drive vendors' market entry or exit strategies?

Table of Contents

1. Preface

• 1.1. Objectives of the Study
• 1.2. Market Segmentation & Coverage
• 1.3. Years Considered for the Study
• 1.4. Currency & Pricing
• 1.5. Language
• 1.6. Stakeholders

2. Research Methodology

• 2.1. Define: Research Objective
• 2.2. Determine: Research Design
• 2.3. Prepare: Research Instrument
• 2.4. Collect: Data Source
• 2.5. Analyze: Data Interpretation
• 2.6. Formulate: Data Verification
• 2.7. Publish: Research Report
• 2.8. Repeat: Report Update

3. Executive Summary

4. Market Overview

5. Market Insights

• 5.1. Market Dynamics
  • 5.1.1. Drivers
    • 5.1.1.1. Growing automotive production and sales worldwide and need for improved dual-clutch transmission systems
    • 5.1.1.2. Strict government rules for vehicle safety and standards for the safety of clutch system
  • 5.1.2. Restraints
    • 5.1.2.1. Technical and operational limitations of automotive clutch
  • 5.1.3. Opportunities
    • 5.1.3.1. Advancements in clutch designs and rise of clutch automation system
    • 5.1.3.2. Expansion of automotive aftermarket and availability of new aftermarket clutch kits
  • 5.1.4. Challenges
    • 5.1.4.1. Design complexities associated with manufacturing automotive clutch
• 5.2. Market Segmentation Analysis
• 5.3. Porter's Five Forces Analysis
  • 5.3.1. Threat of New Entrants
  • 5.3.2. Threat of Substitutes
  • 5.3.3. Bargaining Power of Customers
  • 5.3.4. Bargaining Power of Suppliers
  • 5.3.5. Industry Rivalry
• 5.4. PESTLE Analysis
  • 5.4.1. Political
  • 5.4.2. Economic
  • 5.4.3. Social
  • 5.4.4. Technological
  • 5.4.5. Legal
  • 5.4.6. Environmental

6. Automotive Clutch Market, by Clutch Disc Size

• 6.1. Introduction
• 6.2. 10 to 11 Inches Disc
• 6.3. 11 Inches & Above Disc
• 6.4. 9 to 10 Inches Disc
• 6.5. Below 9 Inches Disc

7. Automotive Clutch Market, by Clutch Type

• 7.1. Introduction
• 7.2. Electromagnetic Clutch
• 7.3. Friction Clutch
  • 7.3.1. Centrifugal Clutch
  • 7.3.2. Cone Clutch
  • 7.3.3. Plate
    • 7.3.3.1. Multi-plate Clutch
    • 7.3.3.2. Single Plate Clutch
• 7.4. Hydraulic clutch
• 7.5. Positive Clutch
  • 7.5.1. Dog Clutch
  • 7.5.2. Spline Clutch

8. Automotive Clutch Market, by Material Type

• 8.1. Introduction
• 8.2. Metal
• 8.3. Non-metal

9. Automotive Clutch Market, by Distribution Channel

• 9.1. Introduction
• 9.2. Aftermarket
• 9.3. OEM

10. Automotive Clutch Market, by Vehicle Type

• 10.1. Introduction
• 10.2. Commercial Vehicles
• 10.3. Passenger Vehicles

11. Americas Automotive Clutch Market

• 11.1. Introduction
• 11.2. Argentina
• 11.3. Brazil
• 11.4. Canada
• 11.5. Mexico
• 11.6. United States

12. Asia-Pacific Automotive Clutch Market

• 12.1. Introduction
• 12.2. Australia
• 12.3. China
• 12.4. India
• 12.5. Indonesia
• 12.6. Japan
• 12.7. Malaysia
• 12.8. Philippines
• 12.9. Singapore
• 12.10. South Korea
• 12.11. Taiwan
• 12.12. Thailand
• 12.13. Vietnam

13. Europe, Middle East & Africa Automotive Clutch Market

• 13.1. Introduction
• 13.2. Denmark
• 13.3. Egypt
• 13.4. Finland
• 13.5. France
• 13.6. Germany
• 13.7. Israel
• 13.8. Italy
• 13.9. Netherlands
• 13.10. Nigeria
• 13.11. Norway
• 13.12. Poland
• 13.13. Qatar
• 13.14. Russia
• 13.15. Saudi Arabia
• 13.16. South Africa
• 13.17. Spain
• 13.18. Sweden
• 13.19. Switzerland
• 13.20. Turkey
• 13.21. United Arab Emirates
• 13.22. United Kingdom

14. Competitive Landscape

• 14.1. Market Share Analysis, 2023
• 14.2. FPNV Positioning Matrix, 2023
• 14.3. Competitive Scenario Analysis
  • 14.3.1. Tata AutoComp to invest Rs 500 crore in dual-clutch transmission plant in Chakan
  • 14.3.2. Wharton Automotive Group Acquires Powertrain Technology (PTT)
  • 14.3.3. Stellantis signs pact with Punch Powertrain for electrified dual-clutch transmissions for hybrids and PHEVs
  • 14.3.4. Stellantis invests in Italy to boost low emission vehicle production
  • 14.3.5. JATCO develops a new wet clutch using biomimetics
  • 14.3.6. Magna Begins Production of First Mild Hybrid Transverse Transmission for BMW Group
  • 14.3.7. Punch Powertrain launches proprietary DCT invention in serial production
  • 14.3.8. Katech Launches LT5X Clutch For C6 Corvette And 2010-2015 Camaro
  • 14.3.9. Toyota plans for EV with manual transmission and clutch
  • 14.3.10. Husqvarna Motorcycles Extends Partnership With Rekluse Through 2022
• 14.4. Strategy Analysis & Recommendation

Companies Mentioned

• 1. Aisin Seiki Co., Ltd.
• 2. Apls Automotive Industries Pvt. Ltd.
• 3. BLM Automatic Clutch
• 4. BorgWarner Inc.
• 5. Brunel Corporation
• 6. Centerforce Performance Clutch
• 7. Clutch Engineering Co.
• 8. Coremo Ocmea S.p.A.
• 9. DESCH Antriebstechnik GmbH & Co. KG
• 10. Eaton Corporation
• 11. Exedy Corporation
• 12. FCC CLUTCH INDIA PVT. LTD.
• 13. Ford Motor Company
• 14. Formsprag Clutch
• 15. General Motors Company
• 16. Honda Motor Company, Ltd.
• 17. Hyundai Motor Company
• 18. JATCO Ltd.
• 19. Kendrion N.V.
• 20. Kia Motor Corporation
• 21. Logan Clutch Corporation
• 22. Mahindra & Mahindra Limited
• 23. Mod E-Tech Engineering Pvt Ltd.
• 24. MODIMAZ Engineers
• 25. Nissan Motor Co., Ltd.
• 26. NSK Ltd.
• 27. Ogura Industrial Corp.
• 28. Pethe Industrial Marketing Company Pvt. Ltd.
• 29. Pitteri Violini S.p.A.
• 30. Schaeffler AG
• 31. SINFONIA TECHNOLOGY (THAILAND) CO., LTD.
• 32. The Carlyle Johnson Machine Company, LLC
• 33. Valeo SA
• 34. Wichita Clutch
• 35. Yamaha Motor Co., Ltd.