세계의 자동차 드라이브 트레인 시장 : 구동 유형, 전기자동차 유형, 차량 유형별 예측(2025-2030년)

The Automotive Drivetrain Market was valued at USD 298.26 billion in 2023, expected to reach USD 320.34 billion in 2024, and is projected to grow at a CAGR of 7.49%, to USD 494.73 billion by 2030.

The Automotive Drivetrain market encompasses components that deliver power to an automotive vehicle's drive wheels, primarily including the transmission, differential, drive shafts, and the final drive. This market is imperative due to continual advancements in vehicular technology aiming for improved efficiency, performance, and sustainability. The prime necessity stems from the increasing demand for enhanced fuel efficiency and the need for reduced vehicular emissions. Applications stretch across passenger vehicles, commercial vehicles, and electric vehicles, expanding the end-use scope with various configurations like all-wheel, front-wheel, and rear-wheel drives. Market growth is influenced by technological advancements like electric drivetrains, rising consumer demand for fuel-efficient vehicles, and stringent emission norms. The shift toward hybrid and fully electric vehicles presents potential opportunities, directed by the global move towards sustainability. Recommendations entail investment in electric and hybrid drivetrain technologies and partnerships with tech companies for IoT integration to capitalize on connected vehicle trends. Among the market's challenges are high R&D costs and the complex transitioning from traditional to electric drivetrains, coupled with supply chain disruptions affecting the global automotive industry. For businesses, focusing on developing cost-effective electric drivetrains and committing to modular design platforms can lead to innovation. Furthermore, research into lightweight materials for drivetrain components can offer improved efficiency, while intelligent systems using AI for predictive maintenance can enhance reliability and customer satisfaction. The nature of the market is highly competitive and driven by fast-paced technological evolutions. Continuous innovation and strategic collaborations with technology and communications firms will be essential for companies aiming to establish a robust foothold. To navigate these challenges successfully, keeping a close tab on regulatory developments and consumer preferences while pursuing proactive investment in R&D is vital.

Market Dynamics: Unveiling Key Market Insights in the Rapidly Evolving Automotive Drivetrain Market

The Automotive Drivetrain Market is undergoing transformative changes driven by a dynamic interplay of supply and demand factors. Understanding these evolving market dynamics prepares business organizations to make informed investment decisions, refine strategic decisions, and seize new opportunities. By gaining a comprehensive view of these trends, business organizations can mitigate various risks across political, geographic, technical, social, and economic domains while also gaining a clearer understanding of consumer behavior and its impact on manufacturing costs and purchasing trends.

• Market Drivers
  • Growing adoption of lightweight driveshaft
  • Higher preferences for vehicle comfort & safety
  • Need for improved vehicle control in unfavorable terrains
• Market Restraints
  • High initial and maintenance cost
• Market Opportunities
  • Introducing number of SUVs & premium cars with all-wheel drive vehicle (AWD) systems
  • Drivetrain configuration with fuel-cell
• Market Challenges
  • Limited capabilities and heavy weight of automotive drivetrains

Porter's Five Forces: A Strategic Tool for Navigating the Automotive Drivetrain Market

Porter's five forces framework is a critical tool for understanding the competitive landscape of the Automotive Drivetrain Market. It offers business organizations with a clear methodology for evaluating their competitive positioning and exploring strategic opportunities. This framework helps businesses assess the power dynamics within the market and determine the profitability of new ventures. With these insights, business organizations can leverage their strengths, address weaknesses, and avoid potential challenges, ensuring a more resilient market positioning.

PESTLE Analysis: Navigating External Influences in the Automotive Drivetrain Market

External macro-environmental factors play a pivotal role in shaping the performance dynamics of the Automotive Drivetrain Market. Political, Economic, Social, Technological, Legal, and Environmental factors analysis provides the necessary information to navigate these influences. By examining PESTLE factors, businesses can better understand potential risks and opportunities. This analysis enables business organizations to anticipate changes in regulations, consumer preferences, and economic trends, ensuring they are prepared to make proactive, forward-thinking decisions.

Market Share Analysis: Understanding the Competitive Landscape in the Automotive Drivetrain Market

A detailed market share analysis in the Automotive Drivetrain Market provides a comprehensive assessment of vendors' performance. Companies can identify their competitive positioning by comparing key metrics, including revenue, customer base, and growth rates. This analysis highlights market concentration, fragmentation, and trends in consolidation, offering vendors the insights required to make strategic decisions that enhance their position in an increasingly competitive landscape.

FPNV Positioning Matrix: Evaluating Vendors' Performance in the Automotive Drivetrain Market

The Forefront, Pathfinder, Niche, Vital (FPNV) Positioning Matrix is a critical tool for evaluating vendors within the Automotive Drivetrain Market. This matrix enables business organizations to make well-informed decisions that align with their goals by assessing vendors based on their business strategy and product satisfaction. The four quadrants provide a clear and precise segmentation of vendors, helping users identify the right partners and solutions that best fit their strategic objectives.

Strategy Analysis & Recommendation: Charting a Path to Success in the Automotive Drivetrain Market

A strategic analysis of the Automotive Drivetrain Market is essential for businesses looking to strengthen their global market presence. By reviewing key resources, capabilities, and performance indicators, business organizations can identify growth opportunities and work toward improvement. This approach helps businesses navigate challenges in the competitive landscape and ensures they are well-positioned to capitalize on newer opportunities and drive long-term success.

Key Company Profiles

The report delves into recent significant developments in the Automotive Drivetrain Market, highlighting leading vendors and their innovative profiles. These include Aisin Corporation, American Axle & Manufacturing, Inc., AVL List GmbH, Dana Incorporated, Dr. Ing. h.c. F. Porsche AG, GKN Automotive Limited, IFA Holding GmbH, Infineon Technologies AG, JTEKT Corporation, Magna International Inc., NXP Semiconductors N.V., Robert Bosch GmbH, Schaeffler AG, Texas Instruments Incorporated, and Valeo.

Market Segmentation & Coverage

This research report categorizes the Automotive Drivetrain Market to forecast the revenues and analyze trends in each of the following sub-markets:

• Based on Drive Type, market is studied across All-Wheel Drive, Front Wheel Drive, and Rear Wheel Drive.
• Based on Electric Vehicle Type, market is studied across Battery Electric Vehicles, Hybrid Electric Vehicles, and Plug-In Hybrid Electric Vehicles.
• Based on Vehicle Type, market is studied across Heavy Commercial Vehicles, Light Commercial Vehicles, and Passenger Car.
• Based on Region, market is studied across Americas, Asia-Pacific, and Europe, Middle East & Africa. The Americas is further studied across Argentina, Brazil, Canada, Mexico, and United States. The United States is further studied across California, Florida, Illinois, New York, Ohio, Pennsylvania, and Texas. The Asia-Pacific is further studied across Australia, China, India, Indonesia, Japan, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, and Vietnam. The Europe, Middle East & Africa is further studied across Denmark, Egypt, Finland, France, Germany, Israel, Italy, Netherlands, Nigeria, Norway, Poland, Qatar, Russia, Saudi Arabia, South Africa, Spain, Sweden, Switzerland, Turkey, United Arab Emirates, and United Kingdom.

The report offers a comprehensive analysis of the market, covering key focus areas:

1. Market Penetration: A detailed review of the current market environment, including extensive data from top industry players, evaluating their market reach and overall influence.

2. Market Development: Identifies growth opportunities in emerging markets and assesses expansion potential in established sectors, providing a strategic roadmap for future growth.

3. Market Diversification: Analyzes recent product launches, untapped geographic regions, major industry advancements, and strategic investments reshaping the market.

4. Competitive Assessment & Intelligence: Provides a thorough analysis of the competitive landscape, examining market share, business strategies, product portfolios, certifications, regulatory approvals, patent trends, and technological advancements of key players.

5. Product Development & Innovation: Highlights cutting-edge technologies, R&D activities, and product innovations expected to drive future market growth.

The report also answers critical questions to aid stakeholders in making informed decisions:

1. What is the current market size, and what is the forecasted growth?

2. Which products, segments, and regions offer the best investment opportunities?

3. What are the key technology trends and regulatory influences shaping the market?

4. How do leading vendors rank in terms of market share and competitive positioning?

5. What revenue sources and strategic opportunities drive vendors' market entry or exit strategies?

Table of Contents

1. Preface

• 1.1. Objectives of the Study
• 1.2. Market Segmentation & Coverage
• 1.3. Years Considered for the Study
• 1.4. Currency & Pricing
• 1.5. Language
• 1.6. Stakeholders

2. Research Methodology

• 2.1. Define: Research Objective
• 2.2. Determine: Research Design
• 2.3. Prepare: Research Instrument
• 2.4. Collect: Data Source
• 2.5. Analyze: Data Interpretation
• 2.6. Formulate: Data Verification
• 2.7. Publish: Research Report
• 2.8. Repeat: Report Update

3. Executive Summary

4. Market Overview

5. Market Insights

• 5.1. Market Dynamics
  • 5.1.1. Drivers
    • 5.1.1.1. Growing adoption of lightweight driveshaft
    • 5.1.1.2. Higher preferences for vehicle comfort & safety
    • 5.1.1.3. Need for improved vehicle control in unfavorable terrains
  • 5.1.2. Restraints
    • 5.1.2.1. High initial and maintenance cost
  • 5.1.3. Opportunities
    • 5.1.3.1. Introducing number of SUVs & premium cars with all-wheel drive vehicle (AWD) systems
    • 5.1.3.2. Drivetrain configuration with fuel-cell
  • 5.1.4. Challenges
    • 5.1.4.1. Limited capabilities and heavy weight of automotive drivetrains
• 5.2. Market Segmentation Analysis
• 5.3. Porter's Five Forces Analysis
  • 5.3.1. Threat of New Entrants
  • 5.3.2. Threat of Substitutes
  • 5.3.3. Bargaining Power of Customers
  • 5.3.4. Bargaining Power of Suppliers
  • 5.3.5. Industry Rivalry
• 5.4. PESTLE Analysis
  • 5.4.1. Political
  • 5.4.2. Economic
  • 5.4.3. Social
  • 5.4.4. Technological
  • 5.4.5. Legal
  • 5.4.6. Environmental

6. Automotive Drivetrain Market, by Drive Type

• 6.1. Introduction
• 6.2. All-Wheel Drive
• 6.3. Front Wheel Drive
• 6.4. Rear Wheel Drive

7. Automotive Drivetrain Market, by Electric Vehicle Type

• 7.1. Introduction
• 7.2. Battery Electric Vehicles
• 7.3. Hybrid Electric Vehicles
• 7.4. Plug-In Hybrid Electric Vehicles

8. Automotive Drivetrain Market, by Vehicle Type

• 8.1. Introduction
• 8.2. Heavy Commercial Vehicles
• 8.3. Light Commercial Vehicles
• 8.4. Passenger Car

9. Americas Automotive Drivetrain Market

• 9.1. Introduction
• 9.2. Argentina
• 9.3. Brazil
• 9.4. Canada
• 9.5. Mexico
• 9.6. United States

10. Asia-Pacific Automotive Drivetrain Market

• 10.1. Introduction
• 10.2. Australia
• 10.3. China
• 10.4. India
• 10.5. Indonesia
• 10.6. Japan
• 10.7. Malaysia
• 10.8. Philippines
• 10.9. Singapore
• 10.10. South Korea
• 10.11. Taiwan
• 10.12. Thailand
• 10.13. Vietnam

11. Europe, Middle East & Africa Automotive Drivetrain Market

• 11.1. Introduction
• 11.2. Denmark
• 11.3. Egypt
• 11.4. Finland
• 11.5. France
• 11.6. Germany
• 11.7. Israel
• 11.8. Italy
• 11.9. Netherlands
• 11.10. Nigeria
• 11.11. Norway
• 11.12. Poland
• 11.13. Qatar
• 11.14. Russia
• 11.15. Saudi Arabia
• 11.16. South Africa
• 11.17. Spain
• 11.18. Sweden
• 11.19. Switzerland
• 11.20. Turkey
• 11.21. United Arab Emirates
• 11.22. United Kingdom

12. Competitive Landscape

• 12.1. Market Share Analysis, 2023
• 12.2. FPNV Positioning Matrix, 2023
• 12.3. Competitive Scenario Analysis
• 12.4. Strategy Analysis & Recommendation

Companies Mentioned

• 1. Aisin Corporation
• 2. American Axle & Manufacturing, Inc.
• 3. AVL List GmbH
• 4. Dana Incorporated
• 5. Dr. Ing. h.c. F. Porsche AG
• 6. GKN Automotive Limited
• 7. IFA Holding GmbH
• 8. Infineon Technologies AG
• 9. JTEKT Corporation
• 10. Magna International Inc.
• 11. NXP Semiconductors N.V.
• 12. Robert Bosch GmbH
• 13. Schaeffler AG
• 14. Texas Instruments Incorporated
• 15. Valeo