세계의 자동차 경량 재료 시장 : 재료 유형별, 부품별, 차량별, 전기자동차 및 하이브리드 차별, 용도별 예측(2025-2030년)

The Automotive Lightweight Materials Market was valued at USD 96.84 billion in 2023, expected to reach USD 104.35 billion in 2024, and is projected to grow at a CAGR of 7.85%, to USD 164.38 billion by 2030.

The scope and definition of the automotive lightweight materials market encompass the development, production, and application of materials designed to reduce vehicle weight while enhancing performance, fuel efficiency, and safety. These materials include aluminum, high-strength steel, magnesium, and composites such as carbon fiber and polymer composites. The necessity for automotive lightweight materials is primarily driven by stringent emissions regulations, demand for better fuel efficiency, and performance enhancements. Application of these materials spans across various vehicle parts, including body-in-white, powertrain, chassis, and interior components. The end-use scope covers passenger vehicles, commercial vehicles, and electric vehicles (EVs), each demanding reduced vehicle weight for enhanced efficiency and reduced emissions. Market insights reveal key growth factors such as advancements in material technology, rising electric vehicle production, and regulatory pressures on vehicle manufacturers to comply with Carbon emissions standards worldwide. Potential opportunities lie in the expanding EV market, where manufacturers are increasingly adopting lightweight materials to offset battery weight, thus improving range. To capitalize on this, collaborations between OEMs and materials suppliers for developing cost-effective yet high-performance materials are recommended. However, the market faces challenges like high manufacturing costs, recycling issues, and technical limitations in integrating certain materials. Further, the lack of large-scale production facilities for advanced composites can impede growth. Areas ripe for innovation and research include the development of low-cost, high-strength composite materials and advancements in hybrid material solutions that combine the best properties of multiple materials. The market is highly competitive, characterized by continuous R&D and strategic partnerships. Stakeholders must focus on technological innovations and sustainability practices to address cost and recycling challenges while meeting evolving regulatory standards, thus driving growth in this dynamic market.

Market Dynamics: Unveiling Key Market Insights in the Rapidly Evolving Automotive Lightweight Materials Market

The Automotive Lightweight Materials Market is undergoing transformative changes driven by a dynamic interplay of supply and demand factors. Understanding these evolving market dynamics prepares business organizations to make informed investment decisions, refine strategic decisions, and seize new opportunities. By gaining a comprehensive view of these trends, business organizations can mitigate various risks across political, geographic, technical, social, and economic domains while also gaining a clearer understanding of consumer behavior and its impact on manufacturing costs and purchasing trends.

• Market Drivers
  • Stringent regulatory norms to alleviate vehicle emissions and increasing lightweight automobile production
  • Increasing need for vehicle stability, safety, and durability of vehicles
  • Growing adoption of electric and hybrid vehicles
• Market Restraints
  • High cost of automotive lightweight materials
• Market Opportunities
  • Technological advancements and innovations in automobile sector
  • Increase in R&D activities for recycling of lightweight automotive materials
• Market Challenges
  • Concerns regarding maintenance of lightweight materials

Porter's Five Forces: A Strategic Tool for Navigating the Automotive Lightweight Materials Market

Porter's five forces framework is a critical tool for understanding the competitive landscape of the Automotive Lightweight Materials Market. It offers business organizations with a clear methodology for evaluating their competitive positioning and exploring strategic opportunities. This framework helps businesses assess the power dynamics within the market and determine the profitability of new ventures. With these insights, business organizations can leverage their strengths, address weaknesses, and avoid potential challenges, ensuring a more resilient market positioning.

PESTLE Analysis: Navigating External Influences in the Automotive Lightweight Materials Market

External macro-environmental factors play a pivotal role in shaping the performance dynamics of the Automotive Lightweight Materials Market. Political, Economic, Social, Technological, Legal, and Environmental factors analysis provides the necessary information to navigate these influences. By examining PESTLE factors, businesses can better understand potential risks and opportunities. This analysis enables business organizations to anticipate changes in regulations, consumer preferences, and economic trends, ensuring they are prepared to make proactive, forward-thinking decisions.

Market Share Analysis: Understanding the Competitive Landscape in the Automotive Lightweight Materials Market

A detailed market share analysis in the Automotive Lightweight Materials Market provides a comprehensive assessment of vendors' performance. Companies can identify their competitive positioning by comparing key metrics, including revenue, customer base, and growth rates. This analysis highlights market concentration, fragmentation, and trends in consolidation, offering vendors the insights required to make strategic decisions that enhance their position in an increasingly competitive landscape.

FPNV Positioning Matrix: Evaluating Vendors' Performance in the Automotive Lightweight Materials Market

The Forefront, Pathfinder, Niche, Vital (FPNV) Positioning Matrix is a critical tool for evaluating vendors within the Automotive Lightweight Materials Market. This matrix enables business organizations to make well-informed decisions that align with their goals by assessing vendors based on their business strategy and product satisfaction. The four quadrants provide a clear and precise segmentation of vendors, helping users identify the right partners and solutions that best fit their strategic objectives.

Strategy Analysis & Recommendation: Charting a Path to Success in the Automotive Lightweight Materials Market

A strategic analysis of the Automotive Lightweight Materials Market is essential for businesses looking to strengthen their global market presence. By reviewing key resources, capabilities, and performance indicators, business organizations can identify growth opportunities and work toward improvement. This approach helps businesses navigate challenges in the competitive landscape and ensures they are well-positioned to capitalize on newer opportunities and drive long-term success.

Key Company Profiles

The report delves into recent significant developments in the Automotive Lightweight Materials Market, highlighting leading vendors and their innovative profiles. These include Alcoa Corporation, ArcelorMittal S.A., BASF SE, Covestro AG, DuPont de Nemours, Inc., Henkel AG & Co. KGaA, Lyondellbasell Industries Holdings B.V., Novelis, Inc., Owens Corning, POSCO, Stratasys Ltd., Tata Steel Limited, Thyssenkrupp AG, Toray Industries, Inc., and United States Steel Corporation.

Market Segmentation & Coverage

This research report categorizes the Automotive Lightweight Materials Market to forecast the revenues and analyze trends in each of the following sub-markets:

• Based on Material Type, market is studied across Composite, Elastomer, Metal, and Plastic. The Composite is further studied across Carbon Fiber Reinforced Polymer, Glass Fiber Reinforced Polymer, and Natural Fiber Reinforced Polymer. The Elastomer is further studied across EPDM, NR, and SBR. The Metal is further studied across Advanced High Strength Steel, Aluminum, High Strength Steel, and Magnesium & Titanium. The Plastic is further studied across ABS, PA, PC, and PU.
• Based on Component, market is studied across Bumper & Fender, Door, Engine & Exhaust, Frame, Fuel Tank, Hood & Trunk Lid, Instrument Panel, Seat, Transmission, and Wheel.
• Based on Vehicle, market is studied across Heavy Commercial Vehicle, Light Commercial Vehicle, and Passenger Car. The Passenger Car is further studied across Economy Car, Mid-Sized Car, and Premium Car.
• Based on Electric & Hybrid Vehicle, market is studied across Battery Electric Vehicle, Electric Bus, Electric Truck, Hybrid Electric Vehicle, and Plug-In Hybrid Electric Vehicle.
• Based on Application, market is studied across Body in White, Chassis & Suspension, Closures, Interiors, and Powertrain.
• Based on Region, market is studied across Americas, Asia-Pacific, and Europe, Middle East & Africa. The Americas is further studied across Argentina, Brazil, Canada, Mexico, and United States. The United States is further studied across California, Florida, Illinois, New York, Ohio, Pennsylvania, and Texas. The Asia-Pacific is further studied across Australia, China, India, Indonesia, Japan, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, and Vietnam. The Europe, Middle East & Africa is further studied across Denmark, Egypt, Finland, France, Germany, Israel, Italy, Netherlands, Nigeria, Norway, Poland, Qatar, Russia, Saudi Arabia, South Africa, Spain, Sweden, Switzerland, Turkey, United Arab Emirates, and United Kingdom.

The report offers a comprehensive analysis of the market, covering key focus areas:

1. Market Penetration: A detailed review of the current market environment, including extensive data from top industry players, evaluating their market reach and overall influence.

2. Market Development: Identifies growth opportunities in emerging markets and assesses expansion potential in established sectors, providing a strategic roadmap for future growth.

3. Market Diversification: Analyzes recent product launches, untapped geographic regions, major industry advancements, and strategic investments reshaping the market.

4. Competitive Assessment & Intelligence: Provides a thorough analysis of the competitive landscape, examining market share, business strategies, product portfolios, certifications, regulatory approvals, patent trends, and technological advancements of key players.

5. Product Development & Innovation: Highlights cutting-edge technologies, R&D activities, and product innovations expected to drive future market growth.

The report also answers critical questions to aid stakeholders in making informed decisions:

1. What is the current market size, and what is the forecasted growth?

2. Which products, segments, and regions offer the best investment opportunities?

3. What are the key technology trends and regulatory influences shaping the market?

4. How do leading vendors rank in terms of market share and competitive positioning?

5. What revenue sources and strategic opportunities drive vendors' market entry or exit strategies?

Table of Contents

1. Preface

• 1.1. Objectives of the Study
• 1.2. Market Segmentation & Coverage
• 1.3. Years Considered for the Study
• 1.4. Currency & Pricing
• 1.5. Language
• 1.6. Stakeholders

2. Research Methodology

• 2.1. Define: Research Objective
• 2.2. Determine: Research Design
• 2.3. Prepare: Research Instrument
• 2.4. Collect: Data Source
• 2.5. Analyze: Data Interpretation
• 2.6. Formulate: Data Verification
• 2.7. Publish: Research Report
• 2.8. Repeat: Report Update

3. Executive Summary

4. Market Overview

5. Market Insights

• 5.1. Market Dynamics
  • 5.1.1. Drivers
    • 5.1.1.1. Stringent regulatory norms to alleviate vehicle emissions and increasing lightweight automobile production
    • 5.1.1.2. Increasing need for vehicle stability, safety, and durability of vehicles
    • 5.1.1.3. Growing adoption of electric and hybrid vehicles
  • 5.1.2. Restraints
    • 5.1.2.1. High cost of automotive lightweight materials
  • 5.1.3. Opportunities
    • 5.1.3.1. Technological advancements and innovations in automobile sector
    • 5.1.3.2. Increase in R&D activities for recycling of lightweight automotive materials
  • 5.1.4. Challenges
    • 5.1.4.1. Concerns regarding maintenance of lightweight materials
• 5.2. Market Segmentation Analysis
• 5.3. Porter's Five Forces Analysis
  • 5.3.1. Threat of New Entrants
  • 5.3.2. Threat of Substitutes
  • 5.3.3. Bargaining Power of Customers
  • 5.3.4. Bargaining Power of Suppliers
  • 5.3.5. Industry Rivalry
• 5.4. PESTLE Analysis
  • 5.4.1. Political
  • 5.4.2. Economic
  • 5.4.3. Social
  • 5.4.4. Technological
  • 5.4.5. Legal
  • 5.4.6. Environmental

6. Automotive Lightweight Materials Market, by Material Type

• 6.1. Introduction
• 6.2. Composite
  • 6.2.1. Carbon Fiber Reinforced Polymer
  • 6.2.2. Glass Fiber Reinforced Polymer
  • 6.2.3. Natural Fiber Reinforced Polymer
• 6.3. Elastomer
  • 6.3.1. EPDM
  • 6.3.2. NR
  • 6.3.3. SBR
• 6.4. Metal
  • 6.4.1. Advanced High Strength Steel
  • 6.4.2. Aluminum
  • 6.4.3. High Strength Steel
  • 6.4.4. Magnesium & Titanium
• 6.5. Plastic
  • 6.5.1. ABS
  • 6.5.2. PA
  • 6.5.3. PC
  • 6.5.4. PU

7. Automotive Lightweight Materials Market, by Component

• 7.1. Introduction
• 7.2. Bumper & Fender
• 7.3. Door
• 7.4. Engine & Exhaust
• 7.5. Frame
• 7.6. Fuel Tank
• 7.7. Hood & Trunk Lid
• 7.8. Instrument Panel
• 7.9. Seat
• 7.10. Transmission
• 7.11. Wheel

8. Automotive Lightweight Materials Market, by Vehicle

• 8.1. Introduction
• 8.2. Heavy Commercial Vehicle
• 8.3. Light Commercial Vehicle
• 8.4. Passenger Car
  • 8.4.1. Economy Car
  • 8.4.2. Mid-Sized Car
  • 8.4.3. Premium Car

9. Automotive Lightweight Materials Market, by Electric & Hybrid Vehicle

• 9.1. Introduction
• 9.2. Battery Electric Vehicle
• 9.3. Electric Bus
• 9.4. Electric Truck
• 9.5. Hybrid Electric Vehicle
• 9.6. Plug-In Hybrid Electric Vehicle

10. Automotive Lightweight Materials Market, by Application

• 10.1. Introduction
• 10.2. Body in White
• 10.3. Chassis & Suspension
• 10.4. Closures
• 10.5. Interiors
• 10.6. Powertrain

11. Americas Automotive Lightweight Materials Market

• 11.1. Introduction
• 11.2. Argentina
• 11.3. Brazil
• 11.4. Canada
• 11.5. Mexico
• 11.6. United States

12. Asia-Pacific Automotive Lightweight Materials Market

• 12.1. Introduction
• 12.2. Australia
• 12.3. China
• 12.4. India
• 12.5. Indonesia
• 12.6. Japan
• 12.7. Malaysia
• 12.8. Philippines
• 12.9. Singapore
• 12.10. South Korea
• 12.11. Taiwan
• 12.12. Thailand
• 12.13. Vietnam

13. Europe, Middle East & Africa Automotive Lightweight Materials Market

• 13.1. Introduction
• 13.2. Denmark
• 13.3. Egypt
• 13.4. Finland
• 13.5. France
• 13.6. Germany
• 13.7. Israel
• 13.8. Italy
• 13.9. Netherlands
• 13.10. Nigeria
• 13.11. Norway
• 13.12. Poland
• 13.13. Qatar
• 13.14. Russia
• 13.15. Saudi Arabia
• 13.16. South Africa
• 13.17. Spain
• 13.18. Sweden
• 13.19. Switzerland
• 13.20. Turkey
• 13.21. United Arab Emirates
• 13.22. United Kingdom

14. Competitive Landscape

• 14.1. Market Share Analysis, 2023
• 14.2. FPNV Positioning Matrix, 2023
• 14.3. Competitive Scenario Analysis
• 14.4. Strategy Analysis & Recommendation

Companies Mentioned

• 1. Alcoa Corporation
• 2. ArcelorMittal S.A.
• 3. BASF SE
• 4. Covestro AG
• 5. DuPont de Nemours, Inc.
• 6. Henkel AG & Co. KGaA
• 7. Lyondellbasell Industries Holdings B.V.
• 8. Novelis, Inc.
• 9. Owens Corning
• 10. POSCO
• 11. Stratasys Ltd.
• 12. Tata Steel Limited
• 13. Thyssenkrupp AG
• 14. Toray Industries, Inc.
• 15. United States Steel Corporation