세계의 자동차용 서멀 시스템 시장 : 차량 유형별, 컴퍼넌트별, 용도별-예측(2025-2030년)

The Automotive Thermal System Market was valued at USD 25.58 billion in 2023, expected to reach USD 27.15 billion in 2024, and is projected to grow at a CAGR of 6.22%, to USD 39.04 billion by 2030.

The scope and definition of the automotive thermal system encompass various components and technologies that manage heat within a vehicle, including HVAC (Heating, Ventilation, and Air Conditioning) systems, engine cooling systems, transmission heating, and refrigerant cooling systems. These systems are essential for maintaining optimal thermal conditions within a car, enhancing both passenger comfort and vehicle performance by preventing overheating and optimizing fuel efficiency. The end-use scope spans across all vehicle types, including passenger cars, light commercial vehicles, and heavy commercial vehicles. The necessity of these systems is driven by the growing demand for energy-efficient vehicles, stringent emission norms, and the rising adoption of electric vehicles which require advanced thermal management solutions to sustain battery life and performance.

Key growth factors influencing the market include technological advancements in thermal management components, increasing investments in research and development, and regulatory mandates on emission reductions. Opportunities are emerging from the shift towards electrification, with thermal systems playing a critical role in effective temperature regulation for electric vehicle components. The surge in automobile production in emerging economies and the integration of IoT and AI for smarter thermal management are also creating potential growth avenues. However, the market faces limitations such as high costs of advanced materials and systems and the technical challenges of integrating new technologies with legacy systems.

The dynamic nature of the automotive thermal systems market encourages innovation in materials science for lightweight and more efficient components. Research on heat recovery systems and enhancing thermal conductivity of composite materials carries significant promise for business growth. Adapting to consumer preferences for greener vehicles and the move towards carbon neutrality provides further research and market entry points. Navigating these challenges and capitalizing on emerging opportunities will require a strategic focus on developing adaptable, cost-effective solutions that adhere to ever-evolving automotive standards, emphasizing collaboration with OEMs and leveraging technological advancements.

Market Dynamics: Unveiling Key Market Insights in the Rapidly Evolving Automotive Thermal System Market

The Automotive Thermal System Market is undergoing transformative changes driven by a dynamic interplay of supply and demand factors. Understanding these evolving market dynamics prepares business organizations to make informed investment decisions, refine strategic decisions, and seize new opportunities. By gaining a comprehensive view of these trends, business organizations can mitigate various risks across political, geographic, technical, social, and economic domains while also gaining a clearer understanding of consumer behavior and its impact on manufacturing costs and purchasing trends.

• Market Drivers
  • Strict government norms to regulate vehicular emissions to reduce environmental impact
  • Rising demand for automotive heating and ventilation system that are eco-friendly and light-weight
  • Growing demand for luxury and comfort vehicles from consumers
• Market Restraints
  • Capital intensive thermal system and risk of leakage
• Market Opportunities
  • Increasing penetration of electric and hybrid vehicles
  • Technological innovation and advancements in thermal systems
• Market Challenges
  • Dearth of standardization and reduced adoption of these advances in developing economies

Porter's Five Forces: A Strategic Tool for Navigating the Automotive Thermal System Market

Porter's five forces framework is a critical tool for understanding the competitive landscape of the Automotive Thermal System Market. It offers business organizations with a clear methodology for evaluating their competitive positioning and exploring strategic opportunities. This framework helps businesses assess the power dynamics within the market and determine the profitability of new ventures. With these insights, business organizations can leverage their strengths, address weaknesses, and avoid potential challenges, ensuring a more resilient market positioning.

PESTLE Analysis: Navigating External Influences in the Automotive Thermal System Market

External macro-environmental factors play a pivotal role in shaping the performance dynamics of the Automotive Thermal System Market. Political, Economic, Social, Technological, Legal, and Environmental factors analysis provides the necessary information to navigate these influences. By examining PESTLE factors, businesses can better understand potential risks and opportunities. This analysis enables business organizations to anticipate changes in regulations, consumer preferences, and economic trends, ensuring they are prepared to make proactive, forward-thinking decisions.

Market Share Analysis: Understanding the Competitive Landscape in the Automotive Thermal System Market

A detailed market share analysis in the Automotive Thermal System Market provides a comprehensive assessment of vendors' performance. Companies can identify their competitive positioning by comparing key metrics, including revenue, customer base, and growth rates. This analysis highlights market concentration, fragmentation, and trends in consolidation, offering vendors the insights required to make strategic decisions that enhance their position in an increasingly competitive landscape.

FPNV Positioning Matrix: Evaluating Vendors' Performance in the Automotive Thermal System Market

The Forefront, Pathfinder, Niche, Vital (FPNV) Positioning Matrix is a critical tool for evaluating vendors within the Automotive Thermal System Market. This matrix enables business organizations to make well-informed decisions that align with their goals by assessing vendors based on their business strategy and product satisfaction. The four quadrants provide a clear and precise segmentation of vendors, helping users identify the right partners and solutions that best fit their strategic objectives.

Strategy Analysis & Recommendation: Charting a Path to Success in the Automotive Thermal System Market

A strategic analysis of the Automotive Thermal System Market is essential for businesses looking to strengthen their global market presence. By reviewing key resources, capabilities, and performance indicators, business organizations can identify growth opportunities and work toward improvement. This approach helps businesses navigate challenges in the competitive landscape and ensures they are well-positioned to capitalize on newer opportunities and drive long-term success.

Key Company Profiles

The report delves into recent significant developments in the Automotive Thermal System Market, highlighting leading vendors and their innovative profiles. These include Calsonic Kansei Corp, Continental AG, Daikin Industries Ltd, Denso Corporation, DuPont de Nemours, Inc., Gentherm Incorporated, Grayson Thermal Systems, Lennox International. Inc, Mahle GmbH, Robert Bosch GmbH, Sanden Corp., Schaeffler AG, United Technologies Corporation, Valeo Group, Visteon Corporation, and Voss Automotive Inc..

Market Segmentation & Coverage

This research report categorizes the Automotive Thermal System Market to forecast the revenues and analyze trends in each of the following sub-markets:

• Based on Vehicle Type, market is studied across Light Commercial Vehicle (lCV) and Passenger Car.
• Based on Component, market is studied across Compressor, Fluid Transport, HVAC, and Powertrain Cooling.
• Based on Application, market is studied across Engine Cooling, Front & rear A/C, Heated Steering, Heated/ventilated Seats, Motor, Power Electronics, Transmission System, and Waste Heat Recovery.
• Based on Region, market is studied across Americas, Asia-Pacific, and Europe, Middle East & Africa. The Americas is further studied across Argentina, Brazil, Canada, Mexico, and United States. The United States is further studied across California, Florida, Illinois, New York, Ohio, Pennsylvania, and Texas. The Asia-Pacific is further studied across Australia, China, India, Indonesia, Japan, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, and Vietnam. The Europe, Middle East & Africa is further studied across Denmark, Egypt, Finland, France, Germany, Israel, Italy, Netherlands, Nigeria, Norway, Poland, Qatar, Russia, Saudi Arabia, South Africa, Spain, Sweden, Switzerland, Turkey, United Arab Emirates, and United Kingdom.

The report offers a comprehensive analysis of the market, covering key focus areas:

1. Market Penetration: A detailed review of the current market environment, including extensive data from top industry players, evaluating their market reach and overall influence.

2. Market Development: Identifies growth opportunities in emerging markets and assesses expansion potential in established sectors, providing a strategic roadmap for future growth.

3. Market Diversification: Analyzes recent product launches, untapped geographic regions, major industry advancements, and strategic investments reshaping the market.

4. Competitive Assessment & Intelligence: Provides a thorough analysis of the competitive landscape, examining market share, business strategies, product portfolios, certifications, regulatory approvals, patent trends, and technological advancements of key players.

5. Product Development & Innovation: Highlights cutting-edge technologies, R&D activities, and product innovations expected to drive future market growth.

The report also answers critical questions to aid stakeholders in making informed decisions:

1. What is the current market size, and what is the forecasted growth?

2. Which products, segments, and regions offer the best investment opportunities?

3. What are the key technology trends and regulatory influences shaping the market?

4. How do leading vendors rank in terms of market share and competitive positioning?

5. What revenue sources and strategic opportunities drive vendors' market entry or exit strategies?

Table of Contents

1. Preface

• 1.1. Objectives of the Study
• 1.2. Market Segmentation & Coverage
• 1.3. Years Considered for the Study
• 1.4. Currency & Pricing
• 1.5. Language
• 1.6. Stakeholders

2. Research Methodology

• 2.1. Define: Research Objective
• 2.2. Determine: Research Design
• 2.3. Prepare: Research Instrument
• 2.4. Collect: Data Source
• 2.5. Analyze: Data Interpretation
• 2.6. Formulate: Data Verification
• 2.7. Publish: Research Report
• 2.8. Repeat: Report Update

3. Executive Summary

4. Market Overview

5. Market Insights

• 5.1. Market Dynamics
  • 5.1.1. Drivers
    • 5.1.1.1. Strict government norms to regulate vehicular emissions to reduce environmental impact
    • 5.1.1.2. Rising demand for automotive heating and ventilation system that are eco-friendly and light-weight
    • 5.1.1.3. Growing demand for luxury and comfort vehicles from consumers
  • 5.1.2. Restraints
    • 5.1.2.1. Capital intensive thermal system and risk of leakage
  • 5.1.3. Opportunities
    • 5.1.3.1. Increasing penetration of electric and hybrid vehicles
    • 5.1.3.2. Technological innovation and advancements in thermal systems
  • 5.1.4. Challenges
    • 5.1.4.1. Dearth of standardization and reduced adoption of these advances in developing economies
• 5.2. Market Segmentation Analysis
• 5.3. Porter's Five Forces Analysis
  • 5.3.1. Threat of New Entrants
  • 5.3.2. Threat of Substitutes
  • 5.3.3. Bargaining Power of Customers
  • 5.3.4. Bargaining Power of Suppliers
  • 5.3.5. Industry Rivalry
• 5.4. PESTLE Analysis
  • 5.4.1. Political
  • 5.4.2. Economic
  • 5.4.3. Social
  • 5.4.4. Technological
  • 5.4.5. Legal
  • 5.4.6. Environmental

6. Automotive Thermal System Market, by Vehicle Type

• 6.1. Introduction
• 6.2. Light Commercial Vehicle (lCV)
• 6.3. Passenger Car

7. Automotive Thermal System Market, by Component

• 7.1. Introduction
• 7.2. Compressor
• 7.3. Fluid Transport
• 7.4. HVAC
• 7.5. Powertrain Cooling

8. Automotive Thermal System Market, by Application

• 8.1. Introduction
• 8.2. Engine Cooling
• 8.3. Front & rear A/C
• 8.4. Heated Steering
• 8.5. Heated/ventilated Seats
• 8.6. Motor
• 8.7. Power Electronics
• 8.8. Transmission System
• 8.9. Waste Heat Recovery

9. Americas Automotive Thermal System Market

• 9.1. Introduction
• 9.2. Argentina
• 9.3. Brazil
• 9.4. Canada
• 9.5. Mexico
• 9.6. United States

10. Asia-Pacific Automotive Thermal System Market

• 10.1. Introduction
• 10.2. Australia
• 10.3. China
• 10.4. India
• 10.5. Indonesia
• 10.6. Japan
• 10.7. Malaysia
• 10.8. Philippines
• 10.9. Singapore
• 10.10. South Korea
• 10.11. Taiwan
• 10.12. Thailand
• 10.13. Vietnam

11. Europe, Middle East & Africa Automotive Thermal System Market

• 11.1. Introduction
• 11.2. Denmark
• 11.3. Egypt
• 11.4. Finland
• 11.5. France
• 11.6. Germany
• 11.7. Israel
• 11.8. Italy
• 11.9. Netherlands
• 11.10. Nigeria
• 11.11. Norway
• 11.12. Poland
• 11.13. Qatar
• 11.14. Russia
• 11.15. Saudi Arabia
• 11.16. South Africa
• 11.17. Spain
• 11.18. Sweden
• 11.19. Switzerland
• 11.20. Turkey
• 11.21. United Arab Emirates
• 11.22. United Kingdom

12. Competitive Landscape

• 12.1. Market Share Analysis, 2023
• 12.2. FPNV Positioning Matrix, 2023
• 12.3. Competitive Scenario Analysis
• 12.4. Strategy Analysis & Recommendation

Companies Mentioned

• 1. Calsonic Kansei Corp
• 2. Continental AG
• 3. Daikin Industries Ltd
• 4. Denso Corporation
• 5. DuPont de Nemours, Inc.
• 6. Gentherm Incorporated
• 7. Grayson Thermal Systems
• 8. Lennox International. Inc
• 9. Mahle GmbH
• 10. Robert Bosch GmbH
• 11. Sanden Corp.
• 12. Schaeffler AG
• 13. United Technologies Corporation
• 14. Valeo Group
• 15. Visteon Corporation
• 16. Voss Automotive Inc.