세계의 폐쇄형 몰딩 컴포지트 시장 : 섬유 유형, 제조 공정, 용도별 예측(2025-2030년)

The Closed Molding Composites Market was valued at USD 62.61 billion in 2023, expected to reach USD 66.17 billion in 2024, and is projected to grow at a CAGR of 5.77%, to USD 92.76 billion by 2030.

The scope of closed molding composites encompasses technologically advanced processes like resin transfer molding (RTM), compression molding, and vacuum infusion, which are employed to produce lightweight, high-strength materials used across numerous sectors, including automotive, aerospace, construction, and wind energy. These composites are vital for industries seeking materials that promote sustainability and energy efficiency due to their lower waste production and improved material properties. The necessity for closed molding composites stems from the increasing demand for durable yet lightweight materials that can enhance fuel efficiency and reduce carbon footprints, particularly in automotive and aerospace applications. Key growth influencers include the rising adoption of eco-friendly products, advancements in material science, and the booming expansion in the wind energy sector where high-performance composites are essential for manufacturing longer and more efficient blades. Opportunities exist in leveraging technological advancements to reduce production costs, exploring bio-based composites, and expanding applications in emerging markets where industrialization is rapidly growing. However, challenges like the high initial cost of technology adoption, complexity in manufacturing processes, and stringent environmental regulations may hinder market growth. Companies should focus on innovating with smart composites embedded with sensors for structural health monitoring, developing cost-effective production techniques, and investing in recyclability of composites to mitigate environmental concerns. Furthermore, collaborating with academic institutions for R&D can spearhead product innovation and market penetration strategies. The market exhibits a dynamic nature with growing interest in sustainable and recyclable materials, necessitating continuous investment in R&D to stay competitive. To capture emerging opportunities, businesses should focus on strategic partnerships and mergers that provide technology leverage and market access, alongside diversification into untapped industries like marine and sporting goods, to broaden the application scope and stimulate growth.

Market Dynamics: Unveiling Key Market Insights in the Rapidly Evolving Closed Molding Composites Market

The Closed Molding Composites Market is undergoing transformative changes driven by a dynamic interplay of supply and demand factors. Understanding these evolving market dynamics prepares business organizations to make informed investment decisions, refine strategic decisions, and seize new opportunities. By gaining a comprehensive view of these trends, business organizations can mitigate various risks across political, geographic, technical, social, and economic domains while also gaining a clearer understanding of consumer behavior and its impact on manufacturing costs and purchasing trends.

• Market Drivers
  • Rising use of eco-friendly processes for manufacturing composites
  • Increase in use of composites in the aerospace and defense industry
  • Reduction in cycle time and labor costs
• Market Restraints
  • High installation and set-up costs
  • Rising fluctuation and high cost of raw materials
• Market Opportunities
  • Increase in use of closed molding composites in new applications
  • Growing technological advancements in the production techniques
  • Rising research and development activities
• Market Challenges
  • Need for reducing cost of carbon fiber

Porter's Five Forces: A Strategic Tool for Navigating the Closed Molding Composites Market

Porter's five forces framework is a critical tool for understanding the competitive landscape of the Closed Molding Composites Market. It offers business organizations with a clear methodology for evaluating their competitive positioning and exploring strategic opportunities. This framework helps businesses assess the power dynamics within the market and determine the profitability of new ventures. With these insights, business organizations can leverage their strengths, address weaknesses, and avoid potential challenges, ensuring a more resilient market positioning.

PESTLE Analysis: Navigating External Influences in the Closed Molding Composites Market

External macro-environmental factors play a pivotal role in shaping the performance dynamics of the Closed Molding Composites Market. Political, Economic, Social, Technological, Legal, and Environmental factors analysis provides the necessary information to navigate these influences. By examining PESTLE factors, businesses can better understand potential risks and opportunities. This analysis enables business organizations to anticipate changes in regulations, consumer preferences, and economic trends, ensuring they are prepared to make proactive, forward-thinking decisions.

Market Share Analysis: Understanding the Competitive Landscape in the Closed Molding Composites Market

A detailed market share analysis in the Closed Molding Composites Market provides a comprehensive assessment of vendors' performance. Companies can identify their competitive positioning by comparing key metrics, including revenue, customer base, and growth rates. This analysis highlights market concentration, fragmentation, and trends in consolidation, offering vendors the insights required to make strategic decisions that enhance their position in an increasingly competitive landscape.

FPNV Positioning Matrix: Evaluating Vendors' Performance in the Closed Molding Composites Market

The Forefront, Pathfinder, Niche, Vital (FPNV) Positioning Matrix is a critical tool for evaluating vendors within the Closed Molding Composites Market. This matrix enables business organizations to make well-informed decisions that align with their goals by assessing vendors based on their business strategy and product satisfaction. The four quadrants provide a clear and precise segmentation of vendors, helping users identify the right partners and solutions that best fit their strategic objectives.

Strategy Analysis & Recommendation: Charting a Path to Success in the Closed Molding Composites Market

A strategic analysis of the Closed Molding Composites Market is essential for businesses looking to strengthen their global market presence. By reviewing key resources, capabilities, and performance indicators, business organizations can identify growth opportunities and work toward improvement. This approach helps businesses navigate challenges in the competitive landscape and ensures they are well-positioned to capitalize on newer opportunities and drive long-term success.

Key Company Profiles

The report delves into recent significant developments in the Closed Molding Composites Market, highlighting leading vendors and their innovative profiles. These include Chomarat, Core Molding Technologies, Inc., Exel Composites Oyj, GKN Aerospace, Gurit, Huntsman International LLC, KraussMaffei Group, LyondellBasell Industries N.V., Menzolit GmbH, Polynt S.p.A., Royal Ten Cate N.V., Saertex, Scott Bader Company Ltd., Seemann Composites, LLC, Strongwell Corporation, and Teijin Limited.

Market Segmentation & Coverage

This research report categorizes the Closed Molding Composites Market to forecast the revenues and analyze trends in each of the following sub-markets:

• Based on Fiber Type, market is studied across Aramid Fiber Closed Molding Composites, Carbon Fiber Closed Molding Composites, Glass Fiber Closed Molding Composites, and Natural Fiber Closed Molding Composites.
• Based on Manufacturing Process, market is studied across Compression Molding Process, Injection Molding Process, Pultrusion Process, Resin Transfer Molding Process, and Vacuum Infusion & Bagging. The Injection Molding Process is further studied across Reaction Injection Molding. The Resin Transfer Molding Process is further studied across Light RTM and Vacuum Assisted Resin Transfer Molding. The Vacuum Infusion & Bagging is further studied across Vacuum Bagging and Vacuum Infusion.
• Based on Application, market is studied across Aerospace & Defense, Construction & Infrastructure, Consumer Good, Electrical & Electronics, Marine, Transportation, and Wind Energy.
• Based on Region, market is studied across Americas, Asia-Pacific, and Europe, Middle East & Africa. The Americas is further studied across Argentina, Brazil, Canada, Mexico, and United States. The United States is further studied across California, Florida, Illinois, New York, Ohio, Pennsylvania, and Texas. The Asia-Pacific is further studied across Australia, China, India, Indonesia, Japan, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, and Vietnam. The Europe, Middle East & Africa is further studied across Denmark, Egypt, Finland, France, Germany, Israel, Italy, Netherlands, Nigeria, Norway, Poland, Qatar, Russia, Saudi Arabia, South Africa, Spain, Sweden, Switzerland, Turkey, United Arab Emirates, and United Kingdom.

The report offers a comprehensive analysis of the market, covering key focus areas:

1. Market Penetration: A detailed review of the current market environment, including extensive data from top industry players, evaluating their market reach and overall influence.

2. Market Development: Identifies growth opportunities in emerging markets and assesses expansion potential in established sectors, providing a strategic roadmap for future growth.

3. Market Diversification: Analyzes recent product launches, untapped geographic regions, major industry advancements, and strategic investments reshaping the market.

4. Competitive Assessment & Intelligence: Provides a thorough analysis of the competitive landscape, examining market share, business strategies, product portfolios, certifications, regulatory approvals, patent trends, and technological advancements of key players.

5. Product Development & Innovation: Highlights cutting-edge technologies, R&D activities, and product innovations expected to drive future market growth.

The report also answers critical questions to aid stakeholders in making informed decisions:

1. What is the current market size, and what is the forecasted growth?

2. Which products, segments, and regions offer the best investment opportunities?

3. What are the key technology trends and regulatory influences shaping the market?

4. How do leading vendors rank in terms of market share and competitive positioning?

5. What revenue sources and strategic opportunities drive vendors' market entry or exit strategies?

Table of Contents

1. Preface

• 1.1. Objectives of the Study
• 1.2. Market Segmentation & Coverage
• 1.3. Years Considered for the Study
• 1.4. Currency & Pricing
• 1.5. Language
• 1.6. Stakeholders

2. Research Methodology

• 2.1. Define: Research Objective
• 2.2. Determine: Research Design
• 2.3. Prepare: Research Instrument
• 2.4. Collect: Data Source
• 2.5. Analyze: Data Interpretation
• 2.6. Formulate: Data Verification
• 2.7. Publish: Research Report
• 2.8. Repeat: Report Update

3. Executive Summary

4. Market Overview

5. Market Insights

• 5.1. Market Dynamics
  • 5.1.1. Drivers
    • 5.1.1.1. Rising use of eco-friendly processes for manufacturing composites
    • 5.1.1.2. Increase in use of composites in the aerospace and defense industry
    • 5.1.1.3. Reduction in cycle time and labor costs
  • 5.1.2. Restraints
    • 5.1.2.1. High installation and set-up costs
    • 5.1.2.2. Rising fluctuation and high cost of raw materials
  • 5.1.3. Opportunities
    • 5.1.3.1. Increase in use of closed molding composites in new applications
    • 5.1.3.2. Growing technological advancements in the production techniques
    • 5.1.3.3. Rising research and development activities
  • 5.1.4. Challenges
    • 5.1.4.1. Need for reducing cost of carbon fiber
• 5.2. Market Segmentation Analysis
• 5.3. Porter's Five Forces Analysis
  • 5.3.1. Threat of New Entrants
  • 5.3.2. Threat of Substitutes
  • 5.3.3. Bargaining Power of Customers
  • 5.3.4. Bargaining Power of Suppliers
  • 5.3.5. Industry Rivalry
• 5.4. PESTLE Analysis
  • 5.4.1. Political
  • 5.4.2. Economic
  • 5.4.3. Social
  • 5.4.4. Technological
  • 5.4.5. Legal
  • 5.4.6. Environmental

6. Closed Molding Composites Market, by Fiber Type

• 6.1. Introduction
• 6.2. Aramid Fiber Closed Molding Composites
• 6.3. Carbon Fiber Closed Molding Composites
• 6.4. Glass Fiber Closed Molding Composites
• 6.5. Natural Fiber Closed Molding Composites

7. Closed Molding Composites Market, by Manufacturing Process

• 7.1. Introduction
• 7.2. Compression Molding Process
• 7.3. Injection Molding Process
  • 7.3.1. Reaction Injection Molding
• 7.4. Pultrusion Process
• 7.5. Resin Transfer Molding Process
  • 7.5.1. Light RTM
  • 7.5.2. Vacuum Assisted Resin Transfer Molding
• 7.6. Vacuum Infusion & Bagging
  • 7.6.1. Vacuum Bagging
  • 7.6.2. Vacuum Infusion

8. Closed Molding Composites Market, by Application

• 8.1. Introduction
• 8.2. Aerospace & Defense
• 8.3. Construction & Infrastructure
• 8.4. Consumer Good
• 8.5. Electrical & Electronics
• 8.6. Marine
• 8.7. Transportation
• 8.8. Wind Energy

9. Americas Closed Molding Composites Market

• 9.1. Introduction
• 9.2. Argentina
• 9.3. Brazil
• 9.4. Canada
• 9.5. Mexico
• 9.6. United States

10. Asia-Pacific Closed Molding Composites Market

• 10.1. Introduction
• 10.2. Australia
• 10.3. China
• 10.4. India
• 10.5. Indonesia
• 10.6. Japan
• 10.7. Malaysia
• 10.8. Philippines
• 10.9. Singapore
• 10.10. South Korea
• 10.11. Taiwan
• 10.12. Thailand
• 10.13. Vietnam

11. Europe, Middle East & Africa Closed Molding Composites Market

• 11.1. Introduction
• 11.2. Denmark
• 11.3. Egypt
• 11.4. Finland
• 11.5. France
• 11.6. Germany
• 11.7. Israel
• 11.8. Italy
• 11.9. Netherlands
• 11.10. Nigeria
• 11.11. Norway
• 11.12. Poland
• 11.13. Qatar
• 11.14. Russia
• 11.15. Saudi Arabia
• 11.16. South Africa
• 11.17. Spain
• 11.18. Sweden
• 11.19. Switzerland
• 11.20. Turkey
• 11.21. United Arab Emirates
• 11.22. United Kingdom

12. Competitive Landscape

• 12.1. Market Share Analysis, 2023
• 12.2. FPNV Positioning Matrix, 2023
• 12.3. Competitive Scenario Analysis
• 12.4. Strategy Analysis & Recommendation

Companies Mentioned

• 1. Chomarat
• 2. Core Molding Technologies, Inc.
• 3. Exel Composites Oyj
• 4. GKN Aerospace
• 5. Gurit
• 6. Huntsman International LLC
• 7. KraussMaffei Group
• 8. LyondellBasell Industries N.V.
• 9. Menzolit GmbH
• 10. Polynt S.p.A.
• 11. Royal Ten Cate N.V.
• 12. Saertex
• 13. Scott Bader Company Ltd.
• 14. Seemann Composites, LLC
• 15. Strongwell Corporation
• 16. Teijin Limited