세계의 전동 DC 모터 시장 : 로터 유형, 유형, 출력 전력, 전압, 최종 용도별 예측(2025-2030년)

The Electric DC Motor Market was valued at USD 58.35 billion in 2023, expected to reach USD 63.93 billion in 2024, and is projected to grow at a CAGR of 9.65%, to USD 111.21 billion by 2030.

The scope and definition of electric DC motors pivot around their role in converting electrical energy into mechanical energy through direct current. These motors are integral to multiple applications due to their precise speed control, high torque, and reliability. The necessity arises from their utilization in industries such as automotive, electronics, aerospace, and manufacturing, where efficiency and compact design are crucial. In the automotive industry, for example, DC motors are employed in electric vehicles for propulsion; in electronics, they are used in various gadgets and appliances for actuation and control mechanisms. The end-use scope extends to consumer electronics, industrial machinery, and home automation, among others.

Market growth is influenced by factors like the acceleration in electric vehicle adoption, advancements in automation technology, and the increasing emphasis on energy-efficient systems. Governments' eco-friendly mandates are also catalytic, propelling demand for electric motors with reduced emissions. Potential opportunities lie in emerging markets where infrastructure development is on the rise, alongside innovations in IoT for smart motor management systems. A recommendation to leverage these opportunities includes penetrating developing regions and expanding offerings through collaborative ventures with tech companies focused on smart solutions.

However, the market faces limitations such as the high initial cost of DC motors, technological complexities, and supply chain disruptions. The challenge is furthered by intense competition and evolving regulatory standards which necessitate continuous adaptation. Despite these hurdles, areas ripe for innovation include the development of more sustainable and efficient motor designs, and integrating AI capabilities for predictive maintenance and enhanced operational efficiency. Moreover, exploration into advanced materials for lightweight and robust motors could provide significant advantages. Overall, the electric DC motor market is dynamic, characterized by rapid technological evolution, necessitating agility and proactive strategies from businesses to harness emerging growth trajectories effectively.

Market Dynamics: Unveiling Key Market Insights in the Rapidly Evolving Electric DC Motor Market

The Electric DC Motor Market is undergoing transformative changes driven by a dynamic interplay of supply and demand factors. Understanding these evolving market dynamics prepares business organizations to make informed investment decisions, refine strategic decisions, and seize new opportunities. By gaining a comprehensive view of these trends, business organizations can mitigate various risks across political, geographic, technical, social, and economic domains while also gaining a clearer understanding of consumer behavior and its impact on manufacturing costs and purchasing trends.

• Market Drivers
  • Increasing Preference of Electric DC Motors for Electric Vehicles and Hybrid Vehicles
  • Growing Usage of Electric Motors Across Major Industries due to Long Operating life, Lower Maintenance, and Low Energy Consumption
• Market Restraints
  • Slowing Down of the Automotive Industry Due to Small-Sized Vehicles
• Market Opportunities
  • Rising Adoption of Industrial Automation Components in Several Industries and Household Appliances
  • Increasing Adoption of Electric DC Motors for Robots
• Market Challenges
  • Complex Structure and Short Life of Electric DC Motor as Compared to AC Motor

Porter's Five Forces: A Strategic Tool for Navigating the Electric DC Motor Market

Porter's five forces framework is a critical tool for understanding the competitive landscape of the Electric DC Motor Market. It offers business organizations with a clear methodology for evaluating their competitive positioning and exploring strategic opportunities. This framework helps businesses assess the power dynamics within the market and determine the profitability of new ventures. With these insights, business organizations can leverage their strengths, address weaknesses, and avoid potential challenges, ensuring a more resilient market positioning.

PESTLE Analysis: Navigating External Influences in the Electric DC Motor Market

External macro-environmental factors play a pivotal role in shaping the performance dynamics of the Electric DC Motor Market. Political, Economic, Social, Technological, Legal, and Environmental factors analysis provides the necessary information to navigate these influences. By examining PESTLE factors, businesses can better understand potential risks and opportunities. This analysis enables business organizations to anticipate changes in regulations, consumer preferences, and economic trends, ensuring they are prepared to make proactive, forward-thinking decisions.

Market Share Analysis: Understanding the Competitive Landscape in the Electric DC Motor Market

A detailed market share analysis in the Electric DC Motor Market provides a comprehensive assessment of vendors' performance. Companies can identify their competitive positioning by comparing key metrics, including revenue, customer base, and growth rates. This analysis highlights market concentration, fragmentation, and trends in consolidation, offering vendors the insights required to make strategic decisions that enhance their position in an increasingly competitive landscape.

FPNV Positioning Matrix: Evaluating Vendors' Performance in the Electric DC Motor Market

The Forefront, Pathfinder, Niche, Vital (FPNV) Positioning Matrix is a critical tool for evaluating vendors within the Electric DC Motor Market. This matrix enables business organizations to make well-informed decisions that align with their goals by assessing vendors based on their business strategy and product satisfaction. The four quadrants provide a clear and precise segmentation of vendors, helping users identify the right partners and solutions that best fit their strategic objectives.

Strategy Analysis & Recommendation: Charting a Path to Success in the Electric DC Motor Market

A strategic analysis of the Electric DC Motor Market is essential for businesses looking to strengthen their global market presence. By reviewing key resources, capabilities, and performance indicators, business organizations can identify growth opportunities and work toward improvement. This approach helps businesses navigate challenges in the competitive landscape and ensures they are well-positioned to capitalize on newer opportunities and drive long-term success.

Key Company Profiles

The report delves into recent significant developments in the Electric DC Motor Market, highlighting leading vendors and their innovative profiles. These include ABB Ltd., Allied Motion Technologies Inc., Ametek, Inc., Anaheim Automation, Inc., ARC Systems, Inc., Buhler Motor Group, ElectroCraft, Inc., Faulhaber Group, Johnson Electric Holdings Limited, Maxon Motor AG, MinebeaMitsumi Group, Nidec Corporation, Oriental Motor Co., Ltd., Regal Beloit Corporation, Schneider Electric SE, Siemens AG, Teco Electric Company Limited, and Toshiba Corporation.

Market Segmentation & Coverage

This research report categorizes the Electric DC Motor Market to forecast the revenues and analyze trends in each of the following sub-markets:

• Based on Rotor Type, market is studied across Inner Rotor and Outer Rotor.
• Based on Type, market is studied across Brushed DC Motor and Brushless DC Motor.
• Based on Output Power, market is studied across 1 HP & Above and Less than1 HP.
• Based on Voltage, market is studied across 0 - 750 Watts, 3 kW - 75 kW, 750 Watts - 3 kW, and Above 75 kW.
• Based on End Use, market is studied across Aerospace & Transportation, Household Appliances, HVAC Equipment, Industrial Machinery, and Motor Vehicles.
• Based on Region, market is studied across Americas, Asia-Pacific, and Europe, Middle East & Africa. The Americas is further studied across Argentina, Brazil, Canada, Mexico, and United States. The United States is further studied across California, Florida, Illinois, New York, Ohio, Pennsylvania, and Texas. The Asia-Pacific is further studied across Australia, China, India, Indonesia, Japan, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, and Vietnam. The Europe, Middle East & Africa is further studied across Denmark, Egypt, Finland, France, Germany, Israel, Italy, Netherlands, Nigeria, Norway, Poland, Qatar, Russia, Saudi Arabia, South Africa, Spain, Sweden, Switzerland, Turkey, United Arab Emirates, and United Kingdom.

The report offers a comprehensive analysis of the market, covering key focus areas:

1. Market Penetration: A detailed review of the current market environment, including extensive data from top industry players, evaluating their market reach and overall influence.

2. Market Development: Identifies growth opportunities in emerging markets and assesses expansion potential in established sectors, providing a strategic roadmap for future growth.

3. Market Diversification: Analyzes recent product launches, untapped geographic regions, major industry advancements, and strategic investments reshaping the market.

4. Competitive Assessment & Intelligence: Provides a thorough analysis of the competitive landscape, examining market share, business strategies, product portfolios, certifications, regulatory approvals, patent trends, and technological advancements of key players.

5. Product Development & Innovation: Highlights cutting-edge technologies, R&D activities, and product innovations expected to drive future market growth.

The report also answers critical questions to aid stakeholders in making informed decisions:

1. What is the current market size, and what is the forecasted growth?

2. Which products, segments, and regions offer the best investment opportunities?

3. What are the key technology trends and regulatory influences shaping the market?

4. How do leading vendors rank in terms of market share and competitive positioning?

5. What revenue sources and strategic opportunities drive vendors' market entry or exit strategies?

Table of Contents

1. Preface

• 1.1. Objectives of the Study
• 1.2. Market Segmentation & Coverage
• 1.3. Years Considered for the Study
• 1.4. Currency & Pricing
• 1.5. Language
• 1.6. Stakeholders

2. Research Methodology

• 2.1. Define: Research Objective
• 2.2. Determine: Research Design
• 2.3. Prepare: Research Instrument
• 2.4. Collect: Data Source
• 2.5. Analyze: Data Interpretation
• 2.6. Formulate: Data Verification
• 2.7. Publish: Research Report
• 2.8. Repeat: Report Update

3. Executive Summary

4. Market Overview

5. Market Insights

• 5.1. Market Dynamics
  • 5.1.1. Drivers
    • 5.1.1.1. Increasing Preference of Electric DC Motors for Electric Vehicles and Hybrid Vehicles
    • 5.1.1.2. Growing Usage of Electric Motors Across Major Industries due to Long Operating life, Lower Maintenance, and Low Energy Consumption
  • 5.1.2. Restraints
    • 5.1.2.1. Slowing Down of the Automotive Industry Due to Small-Sized Vehicles
  • 5.1.3. Opportunities
    • 5.1.3.1. Rising Adoption of Industrial Automation Components in Several Industries and Household Appliances
    • 5.1.3.2. Increasing Adoption of Electric DC Motors for Robots
  • 5.1.4. Challenges
    • 5.1.4.1. Complex Structure and Short Life of Electric DC Motor as Compared to AC Motor
• 5.2. Market Segmentation Analysis
• 5.3. Porter's Five Forces Analysis
  • 5.3.1. Threat of New Entrants
  • 5.3.2. Threat of Substitutes
  • 5.3.3. Bargaining Power of Customers
  • 5.3.4. Bargaining Power of Suppliers
  • 5.3.5. Industry Rivalry
• 5.4. PESTLE Analysis
  • 5.4.1. Political
  • 5.4.2. Economic
  • 5.4.3. Social
  • 5.4.4. Technological
  • 5.4.5. Legal
  • 5.4.6. Environmental

6. Electric DC Motor Market, by Rotor Type

• 6.1. Introduction
• 6.2. Inner Rotor
• 6.3. Outer Rotor

7. Electric DC Motor Market, by Type

• 7.1. Introduction
• 7.2. Brushed DC Motor
• 7.3. Brushless DC Motor

8. Electric DC Motor Market, by Output Power

• 8.1. Introduction
• 8.2. 1 HP & Above
• 8.3. Less than1 HP

9. Electric DC Motor Market, by Voltage

• 9.1. Introduction
• 9.2. 0 - 750 Watts
• 9.3. 3 kW - 75 kW
• 9.4. 750 Watts - 3 kW
• 9.5. Above 75 kW

10. Electric DC Motor Market, by End Use

• 10.1. Introduction
• 10.2. Aerospace & Transportation
• 10.3. Household Appliances
• 10.4. HVAC Equipment
• 10.5. Industrial Machinery
• 10.6. Motor Vehicles

11. Americas Electric DC Motor Market

• 11.1. Introduction
• 11.2. Argentina
• 11.3. Brazil
• 11.4. Canada
• 11.5. Mexico
• 11.6. United States

12. Asia-Pacific Electric DC Motor Market

• 12.1. Introduction
• 12.2. Australia
• 12.3. China
• 12.4. India
• 12.5. Indonesia
• 12.6. Japan
• 12.7. Malaysia
• 12.8. Philippines
• 12.9. Singapore
• 12.10. South Korea
• 12.11. Taiwan
• 12.12. Thailand
• 12.13. Vietnam

13. Europe, Middle East & Africa Electric DC Motor Market

• 13.1. Introduction
• 13.2. Denmark
• 13.3. Egypt
• 13.4. Finland
• 13.5. France
• 13.6. Germany
• 13.7. Israel
• 13.8. Italy
• 13.9. Netherlands
• 13.10. Nigeria
• 13.11. Norway
• 13.12. Poland
• 13.13. Qatar
• 13.14. Russia
• 13.15. Saudi Arabia
• 13.16. South Africa
• 13.17. Spain
• 13.18. Sweden
• 13.19. Switzerland
• 13.20. Turkey
• 13.21. United Arab Emirates
• 13.22. United Kingdom

14. Competitive Landscape

• 14.1. Market Share Analysis, 2023
• 14.2. FPNV Positioning Matrix, 2023
• 14.3. Competitive Scenario Analysis
• 14.4. Strategy Analysis & Recommendation

Companies Mentioned

• 1. ABB Ltd.
• 2. Allied Motion Technologies Inc.
• 3. Ametek, Inc.
• 4. Anaheim Automation, Inc.
• 5. ARC Systems, Inc.
• 6. Buhler Motor Group
• 7. ElectroCraft, Inc.
• 8. Faulhaber Group
• 9. Johnson Electric Holdings Limited
• 10. Maxon Motor AG
• 11. MinebeaMitsumi Group
• 12. Nidec Corporation
• 13. Oriental Motor Co., Ltd.
• 14. Regal Beloit Corporation
• 15. Schneider Electric SE
• 16. Siemens AG
• 17. Teco Electric Company Limited
• 18. Toshiba Corporation