세계의 산업용 버너 시장 : 연료 유형별, 버너 유형별, 정격 출력별, 동작 온도별, 최종 이용 산업별, 용도별 - 예측(2025-2030년)

The Industrial Burner Market was valued at USD 7.94 billion in 2023, expected to reach USD 8.58 billion in 2024, and is projected to grow at a CAGR of 8.54%, to USD 14.10 billion by 2030.

The industrial burner market plays a critical role in supplying thermal energy across various industrial processes, thus fueling numerous sectors including petrochemicals, power generation, metals, and food processing. Industrial burners are pivotal in enhancing combustion efficiency, optimizing energy use, and minimizing emissions, aligning with the growing regulatory pressures for environmental compliance. The necessity of industrial burners cannot be understated, as they enable the efficient conversion of fuels into heat energy, which is crucial for process heating, steam generation, and drying applications. End-use industries like chemicals, metallurgy, and cement significantly depend on these systems for maintaining streamlined operations and ensuring product quality. Market growth is influenced by a surge in industrial activities, technological advancements, and the shift toward energy-efficient solutions. Transitioning to cleaner energy and integrating IoT for smart combustion controls are notable opportunities; businesses could leverage these trends by investing in R&D to develop burner systems with enhanced operational efficiency and lower emissions. However, manufacturers face challenges such as fluctuating raw material costs, stringent emission norms, and complexities associated with retrofitting and maintaining existing equipment. Addressing these challenges necessitates innovation in materials and design, such as developing hybrid burners that can operate on multiple fuel types or incorporating advanced materials to withstand higher temperatures while reducing wear. The market is inherently dynamic with a moderate level of fragmentation, underscored by ongoing competition and partnerships to drive innovation and market reach. For sustainable growth, stakeholders should focus on strategic collaborations with technology firms to harness energy-efficient combustion technologies, expand service offerings for retrofitting old systems, and emphasize education initiatives around operational best practices. Adaptability, coupled with a keen eye on emerging technologies and market demands, will be instrumental for businesses aiming for long-term success in this sector.

Market Dynamics: Unveiling Key Market Insights in the Rapidly Evolving Industrial Burner Market

The Industrial Burner Market is undergoing transformative changes driven by a dynamic interplay of supply and demand factors. Understanding these evolving market dynamics prepares business organizations to make informed investment decisions, refine strategic decisions, and seize new opportunities. By gaining a comprehensive view of these trends, business organizations can mitigate various risks across political, geographic, technical, social, and economic domains while also gaining a clearer understanding of consumer behavior and its impact on manufacturing costs and purchasing trends.

• Market Drivers
  • Rapid growth in industrialization and increasing number of power generation plants
  • Stringent governmental rules and regulations for environment-friendly industrial burners
  • Rising adoption of industrial burners in oil & gas industries worldwide
• Market Restraints
  • High capital investments required for installations of industrial burner
• Market Opportunities
  • Ongoing rise in investments and initiatives for smart industries across the globe
  • Emergence of 3D technologies for manufacturing industrial burners
• Market Challenges
  • Concerns associated with retrofitting, and replacement of industrial burners

Porter's Five Forces: A Strategic Tool for Navigating the Industrial Burner Market

Porter's five forces framework is a critical tool for understanding the competitive landscape of the Industrial Burner Market. It offers business organizations with a clear methodology for evaluating their competitive positioning and exploring strategic opportunities. This framework helps businesses assess the power dynamics within the market and determine the profitability of new ventures. With these insights, business organizations can leverage their strengths, address weaknesses, and avoid potential challenges, ensuring a more resilient market positioning.

PESTLE Analysis: Navigating External Influences in the Industrial Burner Market

External macro-environmental factors play a pivotal role in shaping the performance dynamics of the Industrial Burner Market. Political, Economic, Social, Technological, Legal, and Environmental factors analysis provides the necessary information to navigate these influences. By examining PESTLE factors, businesses can better understand potential risks and opportunities. This analysis enables business organizations to anticipate changes in regulations, consumer preferences, and economic trends, ensuring they are prepared to make proactive, forward-thinking decisions.

Market Share Analysis: Understanding the Competitive Landscape in the Industrial Burner Market

A detailed market share analysis in the Industrial Burner Market provides a comprehensive assessment of vendors' performance. Companies can identify their competitive positioning by comparing key metrics, including revenue, customer base, and growth rates. This analysis highlights market concentration, fragmentation, and trends in consolidation, offering vendors the insights required to make strategic decisions that enhance their position in an increasingly competitive landscape.

FPNV Positioning Matrix: Evaluating Vendors' Performance in the Industrial Burner Market

The Forefront, Pathfinder, Niche, Vital (FPNV) Positioning Matrix is a critical tool for evaluating vendors within the Industrial Burner Market. This matrix enables business organizations to make well-informed decisions that align with their goals by assessing vendors based on their business strategy and product satisfaction. The four quadrants provide a clear and precise segmentation of vendors, helping users identify the right partners and solutions that best fit their strategic objectives.

Strategy Analysis & Recommendation: Charting a Path to Success in the Industrial Burner Market

A strategic analysis of the Industrial Burner Market is essential for businesses looking to strengthen their global market presence. By reviewing key resources, capabilities, and performance indicators, business organizations can identify growth opportunities and work toward improvement. This approach helps businesses navigate challenges in the competitive landscape and ensures they are well-positioned to capitalize on newer opportunities and drive long-term success.

Key Company Profiles

The report delves into recent significant developments in the Industrial Burner Market, highlighting leading vendors and their innovative profiles. These include Andritz AG, Ariston Group N.V., Baltur S.p.A., Faber Burner Company, Forbes Marshall Pvt. Ltd., Honeywell International Inc., Koch Industries, Inc., Limpsfield Combustion Engineering Co. Ltd., Mitsubishi Heavy Industries, Ltd., NIBE Industrier AB, Oilon Group Oy, Oxilon Pvt. Ltd., Riello S.p.A., Selas Heat Technology Co. LLC, and Weishaupt Design Group Inc..

Market Segmentation & Coverage

This research report categorizes the Industrial Burner Market to forecast the revenues and analyze trends in each of the following sub-markets:

• Based on Fuel Type, market is studied across Dual Fuel, Gas, Oil, and Solid Fuel.
• Based on Burner Type, market is studied across Direct-Fired Burner, Duct Burners, High Thermal Release Burner, High-Velocity Burners, Line Burners, Pipe Burners, Radiant Burner, Regenerative Burner, Ribbon Burners, and Self-Recuperative Burner.
• Based on Power Rating, market is studied across Duoblock and Monoblock.
• Based on Operating Temperature, market is studied across High Temperature (> 1,400°F) and Low Temperature (< 1,400°F).
• Based on End-Use Industry, market is studied across Automotive, Ceramics, Chemicals, Food & Beverages, Glass, Metals & Mining, Paper & Pulp, Petrochemicals, Power Generation, Rubber, and Textiles.
• Based on Application, market is studied across Air Heating or Drying, Boilers, Furnaces or Forges, and Incineration.
• Based on Region, market is studied across Americas, Asia-Pacific, and Europe, Middle East & Africa. The Americas is further studied across Argentina, Brazil, Canada, Mexico, and United States. The United States is further studied across California, Florida, Illinois, New York, Ohio, Pennsylvania, and Texas. The Asia-Pacific is further studied across Australia, China, India, Indonesia, Japan, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, and Vietnam. The Europe, Middle East & Africa is further studied across Denmark, Egypt, Finland, France, Germany, Israel, Italy, Netherlands, Nigeria, Norway, Poland, Qatar, Russia, Saudi Arabia, South Africa, Spain, Sweden, Switzerland, Turkey, United Arab Emirates, and United Kingdom.

The report offers a comprehensive analysis of the market, covering key focus areas:

1. Market Penetration: A detailed review of the current market environment, including extensive data from top industry players, evaluating their market reach and overall influence.

2. Market Development: Identifies growth opportunities in emerging markets and assesses expansion potential in established sectors, providing a strategic roadmap for future growth.

3. Market Diversification: Analyzes recent product launches, untapped geographic regions, major industry advancements, and strategic investments reshaping the market.

4. Competitive Assessment & Intelligence: Provides a thorough analysis of the competitive landscape, examining market share, business strategies, product portfolios, certifications, regulatory approvals, patent trends, and technological advancements of key players.

5. Product Development & Innovation: Highlights cutting-edge technologies, R&D activities, and product innovations expected to drive future market growth.

The report also answers critical questions to aid stakeholders in making informed decisions:

1. What is the current market size, and what is the forecasted growth?

2. Which products, segments, and regions offer the best investment opportunities?

3. What are the key technology trends and regulatory influences shaping the market?

4. How do leading vendors rank in terms of market share and competitive positioning?

5. What revenue sources and strategic opportunities drive vendors' market entry or exit strategies?

Table of Contents

1. Preface

• 1.1. Objectives of the Study
• 1.2. Market Segmentation & Coverage
• 1.3. Years Considered for the Study
• 1.4. Currency & Pricing
• 1.5. Language
• 1.6. Stakeholders

2. Research Methodology

• 2.1. Define: Research Objective
• 2.2. Determine: Research Design
• 2.3. Prepare: Research Instrument
• 2.4. Collect: Data Source
• 2.5. Analyze: Data Interpretation
• 2.6. Formulate: Data Verification
• 2.7. Publish: Research Report
• 2.8. Repeat: Report Update

3. Executive Summary

4. Market Overview

5. Market Insights

• 5.1. Market Dynamics
  • 5.1.1. Drivers
    • 5.1.1.1. Rapid growth in industrialization and increasing number of power generation plants
    • 5.1.1.2. Stringent governmental rules and regulations for environment-friendly industrial burners
    • 5.1.1.3. Rising adoption of industrial burners in oil & gas industries worldwide
  • 5.1.2. Restraints
    • 5.1.2.1. High capital investments required for installations of industrial burner
  • 5.1.3. Opportunities
    • 5.1.3.1. Ongoing rise in investments and initiatives for smart industries across the globe
    • 5.1.3.2. Emergence of 3D technologies for manufacturing industrial burners
  • 5.1.4. Challenges
    • 5.1.4.1. Concerns associated with retrofitting, and replacement of industrial burners
• 5.2. Market Segmentation Analysis
• 5.3. Porter's Five Forces Analysis
  • 5.3.1. Threat of New Entrants
  • 5.3.2. Threat of Substitutes
  • 5.3.3. Bargaining Power of Customers
  • 5.3.4. Bargaining Power of Suppliers
  • 5.3.5. Industry Rivalry
• 5.4. PESTLE Analysis
  • 5.4.1. Political
  • 5.4.2. Economic
  • 5.4.3. Social
  • 5.4.4. Technological
  • 5.4.5. Legal
  • 5.4.6. Environmental

6. Industrial Burner Market, by Fuel Type

• 6.1. Introduction
• 6.2. Dual Fuel
• 6.3. Gas
• 6.4. Oil
• 6.5. Solid Fuel

7. Industrial Burner Market, by Burner Type

• 7.1. Introduction
• 7.2. Direct-Fired Burner
• 7.3. Duct Burners
• 7.4. High Thermal Release Burner
• 7.5. High-Velocity Burners
• 7.6. Line Burners
• 7.7. Pipe Burners
• 7.8. Radiant Burner
• 7.9. Regenerative Burner
• 7.10. Ribbon Burners
• 7.11. Self-Recuperative Burner

8. Industrial Burner Market, by Power Rating

• 8.1. Introduction
• 8.2. Duoblock
• 8.3. Monoblock

9. Industrial Burner Market, by Operating Temperature

• 9.1. Introduction
• 9.2. High Temperature (> 1,400°F)
• 9.3. Low Temperature (< 1,400°F)

10. Industrial Burner Market, by End-Use Industry

• 10.1. Introduction
• 10.2. Automotive
• 10.3. Ceramics
• 10.4. Chemicals
• 10.5. Food & Beverages
• 10.6. Glass
• 10.7. Metals & Mining
• 10.8. Paper & Pulp
• 10.9. Petrochemicals
• 10.10. Power Generation
• 10.11. Rubber
• 10.12. Textiles

11. Industrial Burner Market, by Application

• 11.1. Introduction
• 11.2. Air Heating or Drying
• 11.3. Boilers
• 11.4. Furnaces or Forges
• 11.5. Incineration

12. Americas Industrial Burner Market

• 12.1. Introduction
• 12.2. Argentina
• 12.3. Brazil
• 12.4. Canada
• 12.5. Mexico
• 12.6. United States

13. Asia-Pacific Industrial Burner Market

• 13.1. Introduction
• 13.2. Australia
• 13.3. China
• 13.4. India
• 13.5. Indonesia
• 13.6. Japan
• 13.7. Malaysia
• 13.8. Philippines
• 13.9. Singapore
• 13.10. South Korea
• 13.11. Taiwan
• 13.12. Thailand
• 13.13. Vietnam

14. Europe, Middle East & Africa Industrial Burner Market

• 14.1. Introduction
• 14.2. Denmark
• 14.3. Egypt
• 14.4. Finland
• 14.5. France
• 14.6. Germany
• 14.7. Israel
• 14.8. Italy
• 14.9. Netherlands
• 14.10. Nigeria
• 14.11. Norway
• 14.12. Poland
• 14.13. Qatar
• 14.14. Russia
• 14.15. Saudi Arabia
• 14.16. South Africa
• 14.17. Spain
• 14.18. Sweden
• 14.19. Switzerland
• 14.20. Turkey
• 14.21. United Arab Emirates
• 14.22. United Kingdom

15. Competitive Landscape

• 15.1. Market Share Analysis, 2023
• 15.2. FPNV Positioning Matrix, 2023
• 15.3. Competitive Scenario Analysis
• 15.4. Strategy Analysis & Recommendation

Companies Mentioned

• 1. Andritz AG
• 2. Ariston Group N.V.
• 3. Baltur S.p.A.
• 4. Faber Burner Company
• 5. Forbes Marshall Pvt. Ltd.
• 6. Honeywell International Inc.
• 7. Koch Industries, Inc.
• 8. Limpsfield Combustion Engineering Co. Ltd.
• 9. Mitsubishi Heavy Industries, Ltd.
• 10. NIBE Industrier AB
• 11. Oilon Group Oy
• 12. Oxilon Pvt. Ltd.
• 13. Riello S.p.A.
• 14. Selas Heat Technology Co. LLC
• 15. Weishaupt Design Group Inc.