표면 탄성파 기기 시장 : 부품별, 용도별 - 세계 예측(2025-2030년)

The Surface Acoustic Wave Devices Market was valued at USD 4.18 billion in 2023, expected to reach USD 4.65 billion in 2024, and is projected to grow at a CAGR of 9.54%, to USD 7.92 billion by 2030.

Surface Acoustic Wave (SAW) devices, integral in transforming electrical signals using acoustic waves, have gained prominence in various sectors such as telecommunications, consumer electronics, and healthcare. The scope of SAW devices is extensive, encompassing filters, oscillators, sensors, and transducers. These devices offer advantages such as high reliability, compact size, and low power consumption, making them crucial in wireless communication systems for filtering and frequency control. They are widely applied in mobile phones, televisions, remote controls, automotive systems, and in medical diagnostics for biosensing applications. The telecommunications and consumer electronics industries act as major end-use sectors, leveraging SAW technologies for enhancing data transmission quality and device efficiency. Market growth is stimulated by the ever-increasing demand for smartphones, advancements in wireless technology like 5G, and the medical sector's push towards portable diagnostic tools. However, limitations such as performance sensitivity to environmental factors, and competition from alternative technologies like Bulk Acoustic Wave (BAW) devices, may hinder growth. Opportunities emerge with the integration of SAW sensors into IoT devices, where reliability and energy efficiency are paramount. To seize these, market players should focus on R&D for enhancing SAW device durability and performance under diverse conditions. Exploring biodegradability in materials for SAW devices presents another promising avenue for innovation. The market exhibits a competitive yet lucrative landscape, with growth highly influenced by technological advancements and strategic collaborations between electronic and healthcare sectors. Challenges such as price volatility and raw material supply disruptions demand robust supply chain management. Companies positioning themselves strategically by investing in cutting-edge technology and partnerships can substantially benefit. The relentless pace of technological evolution and consumer demand indicates a dynamic market that will reward those pioneering in product innovation and addressing emerging environmental standards.

Market Dynamics: Unveiling Key Market Insights in the Rapidly Evolving Surface Acoustic Wave Devices Market

The Surface Acoustic Wave Devices Market is undergoing transformative changes driven by a dynamic interplay of supply and demand factors. Understanding these evolving market dynamics prepares business organizations to make informed investment decisions, refine strategic decisions, and seize new opportunities. By gaining a comprehensive view of these trends, business organizations can mitigate various risks across political, geographic, technical, social, and economic domains while also gaining a clearer understanding of consumer behavior and its impact on manufacturing costs and purchasing trends.

• Market Drivers
  • Expanding production capacities of consumer electronics industry
  • Growing demand for advanced communication systems from defense sector
  • Emergence of automated and connected vehicles
• Market Restraints
  • Operational limitations associated with SAW devices
• Market Opportunities
  • Recent advancements in surface acoustic wave-based sensors
  • Rising government investments in space technologies
• Market Challenges
  • Challenges associated with technical issues and power consumption of SAW filters

Porter's Five Forces: A Strategic Tool for Navigating the Surface Acoustic Wave Devices Market

Porter's five forces framework is a critical tool for understanding the competitive landscape of the Surface Acoustic Wave Devices Market. It offers business organizations with a clear methodology for evaluating their competitive positioning and exploring strategic opportunities. This framework helps businesses assess the power dynamics within the market and determine the profitability of new ventures. With these insights, business organizations can leverage their strengths, address weaknesses, and avoid potential challenges, ensuring a more resilient market positioning.

PESTLE Analysis: Navigating External Influences in the Surface Acoustic Wave Devices Market

External macro-environmental factors play a pivotal role in shaping the performance dynamics of the Surface Acoustic Wave Devices Market. Political, Economic, Social, Technological, Legal, and Environmental factors analysis provides the necessary information to navigate these influences. By examining PESTLE factors, businesses can better understand potential risks and opportunities. This analysis enables business organizations to anticipate changes in regulations, consumer preferences, and economic trends, ensuring they are prepared to make proactive, forward-thinking decisions.

Market Share Analysis: Understanding the Competitive Landscape in the Surface Acoustic Wave Devices Market

A detailed market share analysis in the Surface Acoustic Wave Devices Market provides a comprehensive assessment of vendors' performance. Companies can identify their competitive positioning by comparing key metrics, including revenue, customer base, and growth rates. This analysis highlights market concentration, fragmentation, and trends in consolidation, offering vendors the insights required to make strategic decisions that enhance their position in an increasingly competitive landscape.

FPNV Positioning Matrix: Evaluating Vendors' Performance in the Surface Acoustic Wave Devices Market

The Forefront, Pathfinder, Niche, Vital (FPNV) Positioning Matrix is a critical tool for evaluating vendors within the Surface Acoustic Wave Devices Market. This matrix enables business organizations to make well-informed decisions that align with their goals by assessing vendors based on their business strategy and product satisfaction. The four quadrants provide a clear and precise segmentation of vendors, helping users identify the right partners and solutions that best fit their strategic objectives.

Strategy Analysis & Recommendation: Charting a Path to Success in the Surface Acoustic Wave Devices Market

A strategic analysis of the Surface Acoustic Wave Devices Market is essential for businesses looking to strengthen their global market presence. By reviewing key resources, capabilities, and performance indicators, business organizations can identify growth opportunities and work toward improvement. This approach helps businesses navigate challenges in the competitive landscape and ensures they are well-positioned to capitalize on newer opportunities and drive long-term success.

Key Company Profiles

The report delves into recent significant developments in the Surface Acoustic Wave Devices Market, highlighting leading vendors and their innovative profiles. These include Abracon, LLC, API Technologies Corporation, Bliley Technologies Inc., BOSTON PIEZO-OPTICS INC., CeramTec GmbH, CTS Corporation, ECS Inc., Golledge Electronics Ltd., Hitachi, Ltd, Honeywell International Inc., Infineon Technologies AG, ITF Co., Ltd, KYOCERA AVX Components Corporation., Microchip Technology Inc., Murata Manufacturing Co., Ltd, Nisshinbo Micro Devices Inc., Oscilent Corporation, Qorvo, Inc., Qualcomm Technologies, Inc., Sawtron Inc., Skyworks Solutions, Inc., Tai-Saw Technology Co., Ltd., TAIYO YUDEN Mobile Technology Co., Ltd., and TDK Corporation.

Market Segmentation & Coverage

This research report categorizes the Surface Acoustic Wave Devices Market to forecast the revenues and analyze trends in each of the following sub-markets:

• Based on Component, market is studied across SAW Filter and SAW Sensor. The SAW Sensor is further studied across Delay Lines and Resonators.
• Based on Applications, market is studied across Biological Sensing, Chemical Sensing, Gas Sensing, Mechanical, and Microfluidics.
• Based on Region, market is studied across Americas, Asia-Pacific, and Europe, Middle East & Africa. The Americas is further studied across Argentina, Brazil, Canada, Mexico, and United States. The United States is further studied across California, Florida, Illinois, New York, Ohio, Pennsylvania, and Texas. The Asia-Pacific is further studied across Australia, China, India, Indonesia, Japan, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, and Vietnam. The Europe, Middle East & Africa is further studied across Denmark, Egypt, Finland, France, Germany, Israel, Italy, Netherlands, Nigeria, Norway, Poland, Qatar, Russia, Saudi Arabia, South Africa, Spain, Sweden, Switzerland, Turkey, United Arab Emirates, and United Kingdom.

The report offers a comprehensive analysis of the market, covering key focus areas:

1. Market Penetration: A detailed review of the current market environment, including extensive data from top industry players, evaluating their market reach and overall influence.

2. Market Development: Identifies growth opportunities in emerging markets and assesses expansion potential in established sectors, providing a strategic roadmap for future growth.

3. Market Diversification: Analyzes recent product launches, untapped geographic regions, major industry advancements, and strategic investments reshaping the market.

4. Competitive Assessment & Intelligence: Provides a thorough analysis of the competitive landscape, examining market share, business strategies, product portfolios, certifications, regulatory approvals, patent trends, and technological advancements of key players.

5. Product Development & Innovation: Highlights cutting-edge technologies, R&D activities, and product innovations expected to drive future market growth.

The report also answers critical questions to aid stakeholders in making informed decisions:

1. What is the current market size, and what is the forecasted growth?

2. Which products, segments, and regions offer the best investment opportunities?

3. What are the key technology trends and regulatory influences shaping the market?

4. How do leading vendors rank in terms of market share and competitive positioning?

5. What revenue sources and strategic opportunities drive vendors' market entry or exit strategies?

Table of Contents

1. Preface

• 1.1. Objectives of the Study
• 1.2. Market Segmentation & Coverage
• 1.3. Years Considered for the Study
• 1.4. Currency & Pricing
• 1.5. Language
• 1.6. Stakeholders

2. Research Methodology

• 2.1. Define: Research Objective
• 2.2. Determine: Research Design
• 2.3. Prepare: Research Instrument
• 2.4. Collect: Data Source
• 2.5. Analyze: Data Interpretation
• 2.6. Formulate: Data Verification
• 2.7. Publish: Research Report
• 2.8. Repeat: Report Update

3. Executive Summary

4. Market Overview

5. Market Insights

• 5.1. Market Dynamics
  • 5.1.1. Drivers
    • 5.1.1.1. Expanding production capacities of consumer electronics industry
    • 5.1.1.2. Growing demand for advanced communication systems from defense sector
    • 5.1.1.3. Emergence of automated and connected vehicles
  • 5.1.2. Restraints
    • 5.1.2.1. Operational limitations associated with SAW devices
  • 5.1.3. Opportunities
    • 5.1.3.1. Recent advancements in surface acoustic wave-based sensors
    • 5.1.3.2. Rising government investments in space technologies
  • 5.1.4. Challenges
    • 5.1.4.1. Challenges associated with technical issues and power consumption of SAW filters
• 5.2. Market Segmentation Analysis
• 5.3. Porter's Five Forces Analysis
  • 5.3.1. Threat of New Entrants
  • 5.3.2. Threat of Substitutes
  • 5.3.3. Bargaining Power of Customers
  • 5.3.4. Bargaining Power of Suppliers
  • 5.3.5. Industry Rivalry
• 5.4. PESTLE Analysis
  • 5.4.1. Political
  • 5.4.2. Economic
  • 5.4.3. Social
  • 5.4.4. Technological
  • 5.4.5. Legal
  • 5.4.6. Environmental

6. Surface Acoustic Wave Devices Market, by Component

• 6.1. Introduction
• 6.2. SAW Filter
• 6.3. SAW Sensor
  • 6.3.1. Delay Lines
  • 6.3.2. Resonators

7. Surface Acoustic Wave Devices Market, by Applications

• 7.1. Introduction
• 7.2. Biological Sensing
• 7.3. Chemical Sensing
• 7.4. Gas Sensing
• 7.5. Mechanical
• 7.6. Microfluidics

8. Americas Surface Acoustic Wave Devices Market

• 8.1. Introduction
• 8.2. Argentina
• 8.3. Brazil
• 8.4. Canada
• 8.5. Mexico
• 8.6. United States

9. Asia-Pacific Surface Acoustic Wave Devices Market

• 9.1. Introduction
• 9.2. Australia
• 9.3. China
• 9.4. India
• 9.5. Indonesia
• 9.6. Japan
• 9.7. Malaysia
• 9.8. Philippines
• 9.9. Singapore
• 9.10. South Korea
• 9.11. Taiwan
• 9.12. Thailand
• 9.13. Vietnam

10. Europe, Middle East & Africa Surface Acoustic Wave Devices Market

• 10.1. Introduction
• 10.2. Denmark
• 10.3. Egypt
• 10.4. Finland
• 10.5. France
• 10.6. Germany
• 10.7. Israel
• 10.8. Italy
• 10.9. Netherlands
• 10.10. Nigeria
• 10.11. Norway
• 10.12. Poland
• 10.13. Qatar
• 10.14. Russia
• 10.15. Saudi Arabia
• 10.16. South Africa
• 10.17. Spain
• 10.18. Sweden
• 10.19. Switzerland
• 10.20. Turkey
• 10.21. United Arab Emirates
• 10.22. United Kingdom

11. Competitive Landscape

• 11.1. Market Share Analysis, 2023
• 11.2. FPNV Positioning Matrix, 2023
• 11.3. Competitive Scenario Analysis
• 11.4. Strategy Analysis & Recommendation

Companies Mentioned

• 1. Abracon, LLC
• 2. API Technologies Corporation
• 3. Bliley Technologies Inc.
• 4. BOSTON PIEZO-OPTICS INC.
• 5. CeramTec GmbH
• 6. CTS Corporation
• 7. ECS Inc.
• 8. Golledge Electronics Ltd.
• 9. Hitachi, Ltd
• 10. Honeywell International Inc.
• 11. Infineon Technologies AG
• 12. ITF Co., Ltd
• 13. KYOCERA AVX Components Corporation.
• 14. Microchip Technology Inc.
• 15. Murata Manufacturing Co., Ltd
• 16. Nisshinbo Micro Devices Inc.
• 17. Oscilent Corporation
• 18. Qorvo, Inc.
• 19. Qualcomm Technologies, Inc.
• 20. Sawtron Inc.
• 21. Skyworks Solutions, Inc.
• 22. Tai-Saw Technology Co., Ltd.
• 23. TAIYO YUDEN Mobile Technology Co., Ltd.
• 24. TDK Corporation