세계의 첨단 자성 재료 시장 : 유형별, 최종 용도별 - 예측(2025-2030년)

The Advanced Magnetic Materials Market was valued at USD 23.22 billion in 2023, expected to reach USD 25.17 billion in 2024, and is projected to grow at a CAGR of 8.79%, to USD 41.91 billion by 2030.

Advanced magnetic materials encompass a variety of materials that exhibit exceptional magnetic properties, used across diverse industrial and technological sectors. This market includes materials such as rare-earth magnets, soft magnetic materials, and magnetostrictive materials, integral to the development of electronic devices, automotive components, medical equipment, and renewable energy solutions. The necessity for these materials is driven by their application in enhancing the efficiency and performance of products, thereby contributing to technological advancement and facilitating energy saving. The automotive sector greatly benefits from advanced magnetic materials in electric and hybrid vehicles, improving performance and reducing emissions. Similarly, the renewable energy sector, particularly wind turbine construction, significantly relies on these materials for improved energy generation efficiency.

Market insights indicate that the growth of advanced magnetic materials is propelled by technological advancements, increased demand for consumer electronics, and the global shift towards renewable energy. The burgeoning electric vehicle market, enhanced use in the medical domain for imaging technologies, and the miniaturization trend in consumer electronics present substantial opportunities for growth. However, the market faces challenges such as volatile prices of raw materials like neodymium and dysprosium, geopolitical supply chain risks, and environmental concerns regarding their mining and processing.

Opportunities lie in the research and innovation of new composite materials and synthetics that could provide similar or enhanced magnetic properties while reducing dependency on scarce and costly raw materials. Additionally, research into recycling and efficient material recovery of magnets from discarded devices could alleviate raw material shortages and environmental pressures. The nature of the advanced magnetic materials market is dynamic and innovation-driven, requiring businesses to invest in cutting-edge research to maintain competitiveness. Businesses are recommended to strategically focus on value chain integration and collaboration with technology developers to not only address existing limitations but also harness emerging opportunities for sustained growth.

Market Dynamics: Unveiling Key Market Insights in the Rapidly Evolving Advanced Magnetic Materials Market

The Advanced Magnetic Materials Market is undergoing transformative changes driven by a dynamic interplay of supply and demand factors. Understanding these evolving market dynamics prepares business organizations to make informed investment decisions, refine strategic decisions, and seize new opportunities. By gaining a comprehensive view of these trends, business organizations can mitigate various risks across political, geographic, technical, social, and economic domains while also gaining a clearer understanding of consumer behavior and its impact on manufacturing costs and purchasing trends.

• Market Drivers
  • Rising demand of soft magnetic material in automotive sector
  • Growing manufacturing activities and rapid infrastructural developments
  • Increasing demand for energy-efficient devices and renewable energy applications
• Market Restraints
  • High cost associated with the advanced magnetic raw material
• Market Opportunities
  • Continuous research and development to improve the performance of magnetic materials
  • Government initiatives for increasing the power generation capacity
• Market Challenges
  • Regulatory challenges associated with the extraction and processing of rare-earth materials

Porter's Five Forces: A Strategic Tool for Navigating the Advanced Magnetic Materials Market

Porter's five forces framework is a critical tool for understanding the competitive landscape of the Advanced Magnetic Materials Market. It offers business organizations with a clear methodology for evaluating their competitive positioning and exploring strategic opportunities. This framework helps businesses assess the power dynamics within the market and determine the profitability of new ventures. With these insights, business organizations can leverage their strengths, address weaknesses, and avoid potential challenges, ensuring a more resilient market positioning.

PESTLE Analysis: Navigating External Influences in the Advanced Magnetic Materials Market

External macro-environmental factors play a pivotal role in shaping the performance dynamics of the Advanced Magnetic Materials Market. Political, Economic, Social, Technological, Legal, and Environmental factors analysis provides the necessary information to navigate these influences. By examining PESTLE factors, businesses can better understand potential risks and opportunities. This analysis enables business organizations to anticipate changes in regulations, consumer preferences, and economic trends, ensuring they are prepared to make proactive, forward-thinking decisions.

Market Share Analysis: Understanding the Competitive Landscape in the Advanced Magnetic Materials Market

A detailed market share analysis in the Advanced Magnetic Materials Market provides a comprehensive assessment of vendors' performance. Companies can identify their competitive positioning by comparing key metrics, including revenue, customer base, and growth rates. This analysis highlights market concentration, fragmentation, and trends in consolidation, offering vendors the insights required to make strategic decisions that enhance their position in an increasingly competitive landscape.

FPNV Positioning Matrix: Evaluating Vendors' Performance in the Advanced Magnetic Materials Market

The Forefront, Pathfinder, Niche, Vital (FPNV) Positioning Matrix is a critical tool for evaluating vendors within the Advanced Magnetic Materials Market. This matrix enables business organizations to make well-informed decisions that align with their goals by assessing vendors based on their business strategy and product satisfaction. The four quadrants provide a clear and precise segmentation of vendors, helping users identify the right partners and solutions that best fit their strategic objectives.

Strategy Analysis & Recommendation: Charting a Path to Success in the Advanced Magnetic Materials Market

A strategic analysis of the Advanced Magnetic Materials Market is essential for businesses looking to strengthen their global market presence. By reviewing key resources, capabilities, and performance indicators, business organizations can identify growth opportunities and work toward improvement. This approach helps businesses navigate challenges in the competitive landscape and ensures they are well-positioned to capitalize on newer opportunities and drive long-term success.

Key Company Profiles

The report delves into recent significant developments in the Advanced Magnetic Materials Market, highlighting leading vendors and their innovative profiles. These include Advanced Magnet Lab, Inc., AMES GROUP Sintering, Anhui Sinomag Technology Co. Ltd., Arnold Magnetic Technologies Corporation, Daido Steel Co., Ltd., Electron Energy Corporation, FJ Industries A/S, Fluxtrol Inc., Hitachi, Ltd., KN Powder Metallurgy, Kumar Magnet Industries, Lynas Rare Earths, Ltd., MATE CO., LTD, Neo Performance Materials Inc., Ningbo Yunsheng Co. Ltd., Shin-Etsu Chemical Co., Ltd., Sintex a/s, Steward Advanced Materials LLC, TDK Corporation, Tengam Engineering, Inc., Toshiba Materials Co., Ltd, TRU Group, Vacuumschmelze GmbH & Co. KG, and voestalpine High Performance Metals GmbH.

Market Segmentation & Coverage

This research report categorizes the Advanced Magnetic Materials Market to forecast the revenues and analyze trends in each of the following sub-markets:

• Based on Type, market is studied across Alnico Magnets, Ferrite Magnets, and Rare-earth Magnets.
• Based on End-use, market is studied across Automotive, Electronics, Industrial, Medical, and Power Generation.
• Based on Region, market is studied across Americas, Asia-Pacific, and Europe, Middle East & Africa. The Americas is further studied across Argentina, Brazil, Canada, Mexico, and United States. The United States is further studied across California, Florida, Illinois, New York, Ohio, Pennsylvania, and Texas. The Asia-Pacific is further studied across Australia, China, India, Indonesia, Japan, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, and Vietnam. The Europe, Middle East & Africa is further studied across Denmark, Egypt, Finland, France, Germany, Israel, Italy, Netherlands, Nigeria, Norway, Poland, Qatar, Russia, Saudi Arabia, South Africa, Spain, Sweden, Switzerland, Turkey, United Arab Emirates, and United Kingdom.

The report offers a comprehensive analysis of the market, covering key focus areas:

1. Market Penetration: A detailed review of the current market environment, including extensive data from top industry players, evaluating their market reach and overall influence.

2. Market Development: Identifies growth opportunities in emerging markets and assesses expansion potential in established sectors, providing a strategic roadmap for future growth.

3. Market Diversification: Analyzes recent product launches, untapped geographic regions, major industry advancements, and strategic investments reshaping the market.

4. Competitive Assessment & Intelligence: Provides a thorough analysis of the competitive landscape, examining market share, business strategies, product portfolios, certifications, regulatory approvals, patent trends, and technological advancements of key players.

5. Product Development & Innovation: Highlights cutting-edge technologies, R&D activities, and product innovations expected to drive future market growth.

The report also answers critical questions to aid stakeholders in making informed decisions:

1. What is the current market size, and what is the forecasted growth?

2. Which products, segments, and regions offer the best investment opportunities?

3. What are the key technology trends and regulatory influences shaping the market?

4. How do leading vendors rank in terms of market share and competitive positioning?

5. What revenue sources and strategic opportunities drive vendors' market entry or exit strategies?

Table of Contents

1. Preface

• 1.1. Objectives of the Study
• 1.2. Market Segmentation & Coverage
• 1.3. Years Considered for the Study
• 1.4. Currency & Pricing
• 1.5. Language
• 1.6. Stakeholders

2. Research Methodology

• 2.1. Define: Research Objective
• 2.2. Determine: Research Design
• 2.3. Prepare: Research Instrument
• 2.4. Collect: Data Source
• 2.5. Analyze: Data Interpretation
• 2.6. Formulate: Data Verification
• 2.7. Publish: Research Report
• 2.8. Repeat: Report Update

3. Executive Summary

4. Market Overview

5. Market Insights

• 5.1. Market Dynamics
  • 5.1.1. Drivers
    • 5.1.1.1. Rising demand of soft magnetic material in automotive sector
    • 5.1.1.2. Growing manufacturing activities and rapid infrastructural developments
    • 5.1.1.3. Increasing demand for energy-efficient devices and renewable energy applications
  • 5.1.2. Restraints
    • 5.1.2.1. High cost associated with the advanced magnetic raw material
  • 5.1.3. Opportunities
    • 5.1.3.1. Continuous research and development to improve the performance of magnetic materials
    • 5.1.3.2. Government initiatives for increasing the power generation capacity
  • 5.1.4. Challenges
    • 5.1.4.1. Regulatory challenges associated with the extraction and processing of rare-earth materials
• 5.2. Market Segmentation Analysis
  • 5.2.1. Type: Growing preference of rare-earth Magnets in automotive due to its compact size and maximum magnetic strength
  • 5.2.2. End-use: Expansion of automotive sector driving the adoption of advanced magnetic materials
• 5.3. Porter's Five Forces Analysis
  • 5.3.1. Threat of New Entrants
  • 5.3.2. Threat of Substitutes
  • 5.3.3. Bargaining Power of Customers
  • 5.3.4. Bargaining Power of Suppliers
  • 5.3.5. Industry Rivalry
• 5.4. PESTLE Analysis
  • 5.4.1. Political
  • 5.4.2. Economic
  • 5.4.3. Social
  • 5.4.4. Technological
  • 5.4.5. Legal
  • 5.4.6. Environmental

6. Advanced Magnetic Materials Market, by Type

• 6.1. Introduction
• 6.2. Alnico Magnets
• 6.3. Ferrite Magnets
• 6.4. Rare-earth Magnets

7. Advanced Magnetic Materials Market, by End-use

• 7.1. Introduction
• 7.2. Automotive
• 7.3. Electronics
• 7.4. Industrial
• 7.5. Medical
• 7.6. Power Generation

8. Americas Advanced Magnetic Materials Market

• 8.1. Introduction
• 8.2. Argentina
• 8.3. Brazil
• 8.4. Canada
• 8.5. Mexico
• 8.6. United States

9. Asia-Pacific Advanced Magnetic Materials Market

• 9.1. Introduction
• 9.2. Australia
• 9.3. China
• 9.4. India
• 9.5. Indonesia
• 9.6. Japan
• 9.7. Malaysia
• 9.8. Philippines
• 9.9. Singapore
• 9.10. South Korea
• 9.11. Taiwan
• 9.12. Thailand
• 9.13. Vietnam

10. Europe, Middle East & Africa Advanced Magnetic Materials Market

• 10.1. Introduction
• 10.2. Denmark
• 10.3. Egypt
• 10.4. Finland
• 10.5. France
• 10.6. Germany
• 10.7. Israel
• 10.8. Italy
• 10.9. Netherlands
• 10.10. Nigeria
• 10.11. Norway
• 10.12. Poland
• 10.13. Qatar
• 10.14. Russia
• 10.15. Saudi Arabia
• 10.16. South Africa
• 10.17. Spain
• 10.18. Sweden
• 10.19. Switzerland
• 10.20. Turkey
• 10.21. United Arab Emirates
• 10.22. United Kingdom

11. Competitive Landscape

• 11.1. Market Share Analysis, 2023
• 11.2. FPNV Positioning Matrix, 2023
• 11.3. Competitive Scenario Analysis
  • 11.3.1. AML announces groundbreaking US production plan for permanent magnets
  • 11.3.2. Ara Partners Acquires Vacuumschmelze, Leading Global Advanced Magnetic Materials Producer
  • 11.3.3. Neo Performance Materials Agrees to Acquire Leading European Magnet Manufacturer
• 11.4. Strategy Analysis & Recommendation

Companies Mentioned

• 1. Advanced Magnet Lab, Inc.
• 2. AMES GROUP Sintering
• 3. Anhui Sinomag Technology Co. Ltd.
• 4. Arnold Magnetic Technologies Corporation
• 5. Daido Steel Co., Ltd.
• 6. Electron Energy Corporation
• 7. FJ Industries A/S
• 8. Fluxtrol Inc.
• 9. Hitachi, Ltd.
• 10. KN Powder Metallurgy
• 11. Kumar Magnet Industries
• 12. Lynas Rare Earths, Ltd.
• 13. MATE CO., LTD
• 14. Neo Performance Materials Inc.
• 15. Ningbo Yunsheng Co. Ltd.
• 16. Shin-Etsu Chemical Co., Ltd.
• 17. Sintex a/s
• 18. Steward Advanced Materials LLC
• 19. TDK Corporation
• 20. Tengam Engineering, Inc.
• 21. Toshiba Materials Co., Ltd
• 22. TRU Group
• 23. Vacuumschmelze GmbH & Co. KG
• 24. voestalpine High Performance Metals GmbH