세계의 자동차용 크랭크 각 센서 시장 : 유형, 용도, 판매 채널별 예측(2025-2030년)

The Automotive Crank Angle Sensor Market was valued at USD 819.01 million in 2023, expected to reach USD 859.22 million in 2024, and is projected to grow at a CAGR of 5.05%, to USD 1,157.05 million by 2030.

The automotive crank angle sensor market is focused on components that measure the position or rotational angle of the crankshaft in internal combustion engines. These sensors are essential for engine management systems, ensuring optimal engine performance, fuel efficiency, and reduced emissions by precisely controlling the ignition and fuel injection timing. Applications for crank angle sensors are broad, primarily in traditional combustion engines, but they also play a critical role in hybrid systems where precise engine control is necessary. The market scope covers a diverse range of end-use sectors, including passenger cars, commercial vehicles, and motorsports, with increasing indispensability due to the trend toward higher vehicle electrification and tighter emission norms.

Key growth factors include the global push for improved fuel efficiency and governmental regulations mandating lower emissions, which drive continuous demand for advanced engine management technologies. Innovations like integration with IoT for real-time diagnostics and advanced materials for better durability and performance are potential growth areas. The latest opportunities lie in expanding the market in emerging economies where automotive sales are climbing, and in developing solutions compatible with electric vehicles. However, market growth faces challenges such as the high cost of advanced sensor technologies and the potential decline in demand as the industry shifts towards fully electric drivetrains, where crank angle sensors are less applicable.

To capitalize on current opportunities, manufacturers should focus on R&D for sensors suitable for hybrid vehicle engines and other complex powertrains, as well as enhancing sensor accuracy and durability under diverse operating conditions. Collaborations with automotive OEMs for custom solutions can yield competitive advantages. Meanwhile, the market's nature is intensely competitive and rapidly evolving as automotive technology advances. Thus, staying ahead in product innovation and maintaining cost-effectiveness are crucial for sustained growth and market leadership.

Market Dynamics: Unveiling Key Market Insights in the Rapidly Evolving Automotive Crank Angle Sensor Market

The Automotive Crank Angle Sensor Market is undergoing transformative changes driven by a dynamic interplay of supply and demand factors. Understanding these evolving market dynamics prepares business organizations to make informed investment decisions, refine strategic decisions, and seize new opportunities. By gaining a comprehensive view of these trends, business organizations can mitigate various risks across political, geographic, technical, social, and economic domains while also gaining a clearer understanding of consumer behavior and its impact on manufacturing costs and purchasing trends.

• Market Drivers
  • Stringent emission norms and fuel efficiency standards worldwide
  • Increasing demand for fuel-efficient vehicles
  • Growing automotive sales and production rates across the world
• Market Restraints
  • High R&D cost and lack of standardization
• Market Opportunities
  • Growing emphasis on autonomous and connected vehicles
  • Ongoing research on wireless and energy-harvesting sensors
• Market Challenges
  • Complexity involved in the installation of automotive crank angle sensor

Porter's Five Forces: A Strategic Tool for Navigating the Automotive Crank Angle Sensor Market

Porter's five forces framework is a critical tool for understanding the competitive landscape of the Automotive Crank Angle Sensor Market. It offers business organizations with a clear methodology for evaluating their competitive positioning and exploring strategic opportunities. This framework helps businesses assess the power dynamics within the market and determine the profitability of new ventures. With these insights, business organizations can leverage their strengths, address weaknesses, and avoid potential challenges, ensuring a more resilient market positioning.

PESTLE Analysis: Navigating External Influences in the Automotive Crank Angle Sensor Market

External macro-environmental factors play a pivotal role in shaping the performance dynamics of the Automotive Crank Angle Sensor Market. Political, Economic, Social, Technological, Legal, and Environmental factors analysis provides the necessary information to navigate these influences. By examining PESTLE factors, businesses can better understand potential risks and opportunities. This analysis enables business organizations to anticipate changes in regulations, consumer preferences, and economic trends, ensuring they are prepared to make proactive, forward-thinking decisions.

Market Share Analysis: Understanding the Competitive Landscape in the Automotive Crank Angle Sensor Market

A detailed market share analysis in the Automotive Crank Angle Sensor Market provides a comprehensive assessment of vendors' performance. Companies can identify their competitive positioning by comparing key metrics, including revenue, customer base, and growth rates. This analysis highlights market concentration, fragmentation, and trends in consolidation, offering vendors the insights required to make strategic decisions that enhance their position in an increasingly competitive landscape.

FPNV Positioning Matrix: Evaluating Vendors' Performance in the Automotive Crank Angle Sensor Market

The Forefront, Pathfinder, Niche, Vital (FPNV) Positioning Matrix is a critical tool for evaluating vendors within the Automotive Crank Angle Sensor Market. This matrix enables business organizations to make well-informed decisions that align with their goals by assessing vendors based on their business strategy and product satisfaction. The four quadrants provide a clear and precise segmentation of vendors, helping users identify the right partners and solutions that best fit their strategic objectives.

Strategy Analysis & Recommendation: Charting a Path to Success in the Automotive Crank Angle Sensor Market

A strategic analysis of the Automotive Crank Angle Sensor Market is essential for businesses looking to strengthen their global market presence. By reviewing key resources, capabilities, and performance indicators, business organizations can identify growth opportunities and work toward improvement. This approach helps businesses navigate challenges in the competitive landscape and ensures they are well-positioned to capitalize on newer opportunities and drive long-term success.

Key Company Profiles

The report delves into recent significant developments in the Automotive Crank Angle Sensor Market, highlighting leading vendors and their innovative profiles. These include Allegro MicroSystems, Inc., BorgWarner Inc., Continental AG, Delphi Group, DENSO Corporation, Dorman Products, Feddermann & Lankau GmbH, Fujikura Europe Ltd., HELLA GmbH & Co. KGaA, Hitachi, Ltd., Infineon Technologies AG, Magna International Inc., Mechatronics Group Pty. Ltd., Melexis NV, NTN Corporation, NXP Semiconductors N.V., OPTIMAL Automotive GmbH, PEC Australia, PROTERIAL, Ltd., Ridex GmbH, Robert Bosch GmbH, Sensata Technologies, Inc., TE Connectivity Ltd., Valeo S.A., and ZF Friedrichshafen AG.

Market Segmentation & Coverage

This research report categorizes the Automotive Crank Angle Sensor Market to forecast the revenues and analyze trends in each of the following sub-markets:

• Based on Type, market is studied across Hall Effect, Magnetic Pick Up Coils, and Optical.
• Based on Application, market is studied across Commercial Vehicles and Passenger Vehicles.
• Based on Sales Channel, market is studied across Aftermarket and Original Equipment Manufacturer.
• Based on Region, market is studied across Americas, Asia-Pacific, and Europe, Middle East & Africa. The Americas is further studied across Argentina, Brazil, Canada, Mexico, and United States. The United States is further studied across California, Florida, Illinois, New York, Ohio, Pennsylvania, and Texas. The Asia-Pacific is further studied across Australia, China, India, Indonesia, Japan, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, and Vietnam. The Europe, Middle East & Africa is further studied across Denmark, Egypt, Finland, France, Germany, Israel, Italy, Netherlands, Nigeria, Norway, Poland, Qatar, Russia, Saudi Arabia, South Africa, Spain, Sweden, Switzerland, Turkey, United Arab Emirates, and United Kingdom.

The report offers a comprehensive analysis of the market, covering key focus areas:

1. Market Penetration: A detailed review of the current market environment, including extensive data from top industry players, evaluating their market reach and overall influence.

2. Market Development: Identifies growth opportunities in emerging markets and assesses expansion potential in established sectors, providing a strategic roadmap for future growth.

3. Market Diversification: Analyzes recent product launches, untapped geographic regions, major industry advancements, and strategic investments reshaping the market.

4. Competitive Assessment & Intelligence: Provides a thorough analysis of the competitive landscape, examining market share, business strategies, product portfolios, certifications, regulatory approvals, patent trends, and technological advancements of key players.

5. Product Development & Innovation: Highlights cutting-edge technologies, R&D activities, and product innovations expected to drive future market growth.

The report also answers critical questions to aid stakeholders in making informed decisions:

1. What is the current market size, and what is the forecasted growth?

2. Which products, segments, and regions offer the best investment opportunities?

3. What are the key technology trends and regulatory influences shaping the market?

4. How do leading vendors rank in terms of market share and competitive positioning?

5. What revenue sources and strategic opportunities drive vendors' market entry or exit strategies?

Table of Contents

1. Preface

• 1.1. Objectives of the Study
• 1.2. Market Segmentation & Coverage
• 1.3. Years Considered for the Study
• 1.4. Currency & Pricing
• 1.5. Language
• 1.6. Stakeholders

2. Research Methodology

• 2.1. Define: Research Objective
• 2.2. Determine: Research Design
• 2.3. Prepare: Research Instrument
• 2.4. Collect: Data Source
• 2.5. Analyze: Data Interpretation
• 2.6. Formulate: Data Verification
• 2.7. Publish: Research Report
• 2.8. Repeat: Report Update

3. Executive Summary

4. Market Overview

5. Market Insights

• 5.1. Market Dynamics
  • 5.1.1. Drivers
    • 5.1.1.1. Stringent emission norms and fuel efficiency standards worldwide
    • 5.1.1.2. Increasing demand for fuel-efficient vehicles
    • 5.1.1.3. Growing automotive sales and production rates across the world
  • 5.1.2. Restraints
    • 5.1.2.1. High R&D cost and lack of standardization
  • 5.1.3. Opportunities
    • 5.1.3.1. Growing emphasis on autonomous and connected vehicles
    • 5.1.3.2. Ongoing research on wireless and energy-harvesting sensors
  • 5.1.4. Challenges
    • 5.1.4.1. Complexity involved in the installation of automotive crank angle sensor
• 5.2. Market Segmentation Analysis
  • 5.2.1. Type: Increasing usage of hall effect crank angle sensors due to their capacity to operate over a wide temperature range.
  • 5.2.2. Application: Evolving usage of automotive crank angle sensors by commercial vehicles
• 5.3. Porter's Five Forces Analysis
  • 5.3.1. Threat of New Entrants
  • 5.3.2. Threat of Substitutes
  • 5.3.3. Bargaining Power of Customers
  • 5.3.4. Bargaining Power of Suppliers
  • 5.3.5. Industry Rivalry
• 5.4. PESTLE Analysis
  • 5.4.1. Political
  • 5.4.2. Economic
  • 5.4.3. Social
  • 5.4.4. Technological
  • 5.4.5. Legal
  • 5.4.6. Environmental

6. Automotive Crank Angle Sensor Market, by Type

• 6.1. Introduction
• 6.2. Hall Effect
• 6.3. Magnetic Pick Up Coils
• 6.4. Optical

7. Automotive Crank Angle Sensor Market, by Application

• 7.1. Introduction
• 7.2. Commercial Vehicles
• 7.3. Passenger Vehicles

8. Automotive Crank Angle Sensor Market, by Sales Channel

• 8.1. Introduction
• 8.2. Aftermarket
• 8.3. Original Equipment Manufacturer

9. Americas Automotive Crank Angle Sensor Market

• 9.1. Introduction
• 9.2. Argentina
• 9.3. Brazil
• 9.4. Canada
• 9.5. Mexico
• 9.6. United States

10. Asia-Pacific Automotive Crank Angle Sensor Market

• 10.1. Introduction
• 10.2. Australia
• 10.3. China
• 10.4. India
• 10.5. Indonesia
• 10.6. Japan
• 10.7. Malaysia
• 10.8. Philippines
• 10.9. Singapore
• 10.10. South Korea
• 10.11. Taiwan
• 10.12. Thailand
• 10.13. Vietnam

11. Europe, Middle East & Africa Automotive Crank Angle Sensor Market

• 11.1. Introduction
• 11.2. Denmark
• 11.3. Egypt
• 11.4. Finland
• 11.5. France
• 11.6. Germany
• 11.7. Israel
• 11.8. Italy
• 11.9. Netherlands
• 11.10. Nigeria
• 11.11. Norway
• 11.12. Poland
• 11.13. Qatar
• 11.14. Russia
• 11.15. Saudi Arabia
• 11.16. South Africa
• 11.17. Spain
• 11.18. Sweden
• 11.19. Switzerland
• 11.20. Turkey
• 11.21. United Arab Emirates
• 11.22. United Kingdom

12. Competitive Landscape

• 12.1. Market Share Analysis, 2023
• 12.2. FPNV Positioning Matrix, 2023
• 12.3. Competitive Scenario Analysis
  • 12.3.1. TDK and LEM Set to Collaborate on Next-Generation TMR-based Integrated Current Sensors for Electrification Applications
  • 12.3.2. Allegro MicroSystems to Acquire Crocus Technology to Accelerate Innovation in TMR Sensing Technology
  • 12.3.3. Continental Expands Engine Management Line with New Category
• 12.4. Strategy Analysis & Recommendation

Companies Mentioned

• 1. Allegro MicroSystems, Inc.
• 2. BorgWarner Inc.
• 3. Continental AG
• 4. Delphi Group
• 5. DENSO Corporation
• 6. Dorman Products
• 7. Feddermann & Lankau GmbH
• 8. Fujikura Europe Ltd.
• 9. HELLA GmbH & Co. KGaA
• 10. Hitachi, Ltd.
• 11. Infineon Technologies AG
• 12. Magna International Inc.
• 13. Mechatronics Group Pty. Ltd.
• 14. Melexis NV
• 15. NTN Corporation
• 16. NXP Semiconductors N.V.
• 17. OPTIMAL Automotive GmbH
• 18. PEC Australia
• 19. PROTERIAL, Ltd.
• 20. Ridex GmbH
• 21. Robert Bosch GmbH
• 22. Sensata Technologies, Inc.
• 23. TE Connectivity Ltd.
• 24. Valeo S.A.
• 25. ZF Friedrichshafen AG