비접촉 송전 시장 : 기술별, 정격 전력별, 주파수 범위별, 전송 거리별, 용도별, 최종 사용자 산업별 예측(2026-2032년)

The Contactless Power Transmission Market was valued at USD 2.76 billion in 2025 and is projected to grow to USD 3.15 billion in 2026, with a CAGR of 16.04%, reaching USD 7.82 billion by 2032.

A strategic introduction that contextualizes contactless power transmission technology, market drivers, interoperability challenges, cross-industry use cases, and investment priorities going forward

Contactless power transmission has progressed from a niche laboratory curiosity to a strategic technology with far-reaching operational implications across multiple industries. The introductory context provided here identifies the principal technological paradigms, the cross-sector value propositions, and the operational trade-offs that decision-makers must weigh when integrating wire-free energy solutions into existing product portfolios and infrastructure. Rather than presenting a narrow technical treatise, this introduction situates contactless power within a broader innovation economy where interoperability, regulatory alignment, and manufacturing scale determine which technologies move from pilot to pervasive use.

Emerging standards and ecosystem alignment are central to adoption, and stakeholders must consider not only component performance but also supply-chain resilience, certification pathways, and end-user experience. The introduction underscores that success in this space depends on coupling robust engineering with practical commercialization strategies that address installation complexity, safety assurance, and lifecycle management. In the paragraphs that follow, the report unpacks the most consequential shifts, segmentation dynamics, regional contrasts, competitive tactics, and recommended actions for leaders charged with translating technical promise into repeatable commercial outcomes.

Mapping transformative shifts reshaping contactless power adoption across automotive electrification, consumer mobility, healthcare implants, industrial automation, and emerging standards and ecosystems

Recent years have produced transformative shifts that are reshaping both the technical architecture and the business models for contactless power transmission. The acceleration of automotive electrification is prompting reimagined energy transfer scenarios such as embedded roadway charging and dynamic in-vehicle delivery, while consumer demand for seamless charging experiences is intensifying momentum behind near-field and resonant solutions. Concurrently, healthcare developments emphasize miniaturization and biocompatibility for medical implants and patient monitoring devices, creating new constraints around safety, long-term reliability, and certification. In industrial settings, factory automation and collaborative robotics increasingly favor non-contact power to reduce downtime and simplify maintenance cycles, which in turn affects procurement decisions and operator training.

On the technology front, improvements in magnetic materials, coil design, and power electronics have narrowed performance gaps between different coupling approaches, enabling broader application fit. Standards bodies and industry consortia are responding with interoperability frameworks that will determine which solutions scale. At the same time, supply-chain reconfiguration and geopolitical considerations are influencing where manufacturing centers and R&D hubs coalesce. Taken together, these shifts alter the competitive landscape: incumbents must move faster to orchestrate ecosystems, and new entrants must prove not only technical differentiation but also manufacturability, compliance readiness, and partner integration capabilities.

Assessing cumulative consequences of United States tariff measures in 2025 on supply chains, component sourcing, cost structures, technology transfer, and strategic partner alignment in the sector

The introduction of United States tariff measures in 2025 has created a strategic inflection point for companies engaged in the design, manufacture, and distribution of contactless power technologies. Tariff actions influence component sourcing choices, the economics of cross-border manufacturing, and the cadence of technology transfer between design hubs and assembly lines. Many firms are evaluating nearshoring, multi-sourcing, and inventory strategies to preserve continuity while managing input-cost pressure. Crucially, tariff-related friction can accelerate vertical integration where firms internalize manufacturing steps that were previously outsourced, and it can also catalyze new partnership models that redistribute value across regional supply networks.

Beyond cost implications, tariffs affect commercial negotiations and contractual commitments with OEMs and system integrators. Procurement teams are revising supplier risk assessments and contract clauses to include tariff contingency plans and pass-through mechanisms. Regulatory compliance and customs complexity also impose additional administrative overhead that can slow time-to-market for new implementations. In response, some companies are investing in modular product architectures and design-for-manufacturability approaches that reduce sensitivity to component origin. The overall effect is to tilt strategic planning toward resilience and flexibility, with a heightened focus on geopolitical scenario planning and more proactive engagement with policy stakeholders to clarify trade rules affecting advanced electromagnetic components.

Key segmentation insights that illuminate application, technology, end-user, power rating, frequency, and transmission-distance dynamics driving design choices and commercial pathways for stakeholders

A granular view of segmentation reveals critical design and commercial inflection points that stakeholders must interpret to prioritize investment and product strategies. When examined by application, distinct delivery imperatives emerge: automotive use cases encompass public and private charging infrastructure, dedicated electric vehicle charging systems, and in-vehicle devices that must withstand automotive thermal, vibration, and safety requirements; consumer electronics demand compact form factors and seamless user experience across smartphones and tablets, wearable devices, and wireless charging pads; healthcare applications require biocompatible, low-emission architectures for medical implants and robust reliability for patient monitoring systems; industrial deployments emphasize ruggedization and integration with factory automation and robotics to enable continuous operation.

Technology-based segmentation further clarifies engineering trade-offs. Capacitive coupling offers solutions across air-gap capacitive and embedded capacitive approaches with particular size and substrate implications. Inductive coupling includes both far-field and near-field topologies suited to different ranges and alignment tolerances. Magnetic resonance can be implemented with multi-coil or single-coil arrays that influence spatial freedom and efficiency. Resonant inductive coupling varies by strong coupling and weak coupling regimes, each dictating distinct power-transfer control strategies. From the end-user industry perspective, the same sectors overlap across development priorities, demanding tailored value propositions. Power-rating considerations differentiate high power, low power, medium power, and ultra-high power implementations and determine cooling, safety, and infrastructure needs. Frequency range selection-whether high frequency, low frequency, or very high frequency-affects electromagnetic compatibility, regulatory clearance, and component selection. Transmission distance-spanning long distance, medium distance, and short distance categories-creates unique coupling, alignment, and beam-forming challenges that shape system architecture and installation models.

Regional competitive dynamics and deployment patterns across the Americas, Europe Middle East and Africa, and Asia-Pacific revealing policy, infrastructure, and industrial clustering impacts

Geography shapes the pace and pattern of contactless power adoption through policy, infrastructure investment, and industrial clustering. In the Americas, policy emphasis on decarbonization and automotive electrification is spawning pilot programs and commercial initiatives focused on public charging networks, in-vehicle energy management, and consumer convenience products; these programs are often coupled with incentives for domestic manufacturing and resilience in semiconductor and magnet supply chains. Europe, Middle East & Africa presents a mosaic of regulatory regimes where harmonization efforts around electromagnetic emissions and safety standards coexist with significant public-sector interest in smart infrastructure, healthcare technology deployment, and manufacturing modernization. Regulatory clarity and certification pathways in this region will be decisive for large-scale deployments.

Asia-Pacific continues to be a major center for electronics manufacturing and component innovation, with dense ecosystems that accelerate prototyping and volume production. Governments and industrial consortia in this region are also active in standards development and in supporting trials that integrate contactless power into consumer devices, electric mobility, and industrial automation. Cross-region collaboration and trade relationships further complicate strategic planning: firms must weigh local market access, intellectual property protections, and the trade policies that influence where R&D and production footprints are established. Overall, regional nuances determine which go-to-market models, partnership structures, and certification investments are most effective for scaling solutions.

Company-level competitive intelligence and strategic positioning analysis highlighting innovation pipelines, partnership frameworks, IP priorities, and manufacturing footprint considerations for market leaders

Competitive positioning in contactless power is increasingly defined by the intersection of IP depth, systems integration capability, and go-to-market partnerships. Leading companies often combine proprietary coil and antenna designs with advanced power electronics, thermal management, and firmware that optimize efficiency under real-world misalignment and load variability. Strategic partnerships with OEMs, infrastructure providers, and standards organizations enable faster product validation and market access, while firms that control manufacturing processes can respond more nimbly to supply-chain disruption and tariff dynamics.

At the same time, challengers are carving out niches by focusing on specialized applications such as medical implants, where miniaturization and reliability trump throughput, or on industrial automation where bespoke form factors and hardened components are required. Several firms are also pursuing licensing models and platform-based approaches to expand ecosystem participation without committing extensive capital to final assembly. For buyers and partners, evaluating a company's roadmap, patent portfolio, manufacturing flexibility, and regulatory track record is essential to assessing long-term viability. The competitive picture therefore rewards organizations that can demonstrate both technical differentiation and pragmatic commercial execution.

Actionable executive recommendations offering practical steps for technology adoption, supply resilience, regulatory engagement, and commercial scaling across enterprise and public-sector stakeholders

Executives and product leaders need actionable steps that convert insight into measurable outcomes across technology, procurement, standards engagement, and commercial execution. First, prioritize modular design strategies that reduce dependence on single-source components and enable rapid substitution of coils, power electronics, or control software without full redesign. Second, implement layered supplier-risk programs that combine long-term strategic partnerships with regional second-source agreements and inventory buffers to mitigate tariff and logistics shocks. Third, engage proactively with standards bodies and certification authorities to influence interoperability specifications and to accelerate safety approvals-early participation reduces compliance uncertainty and shortens adoption cycles.

Additionally, pilots should be structured to generate quantifiable learnings about real-world alignment tolerances, electromagnetic compatibility, and maintenance profiles; use these pilots to build reference cases for customers and regulators. Invest in workforce capability through targeted training programs for installation and service teams, and develop lifecycle service offerings that create recurring revenue streams and improve customer stickiness. Finally, consider hybrid commercial models that combine hardware sales with software-enabled performance guarantees and managed services to align incentives between technology providers and end users. These steps together create a pragmatic path to scaling while managing technical and commercial risk.

Robust research methodology and data validation framework describing primary and secondary approaches, expert engagement, triangulation techniques, and quality assurance for analytic rigor

The analysis underpinning this executive summary is derived from a mixed-method research framework that emphasizes primary engagement, secondary synthesis, and iterative validation. Primary research included in-depth interviews with technology architects, procurement leaders, system integrators, and standards representatives to capture practical constraints and near-term deployment priorities. Secondary sources were leveraged for technical background on coupling methods, electromagnetic safety frameworks, and component-level innovations; these references were cross-checked for consistency and relevance. Triangulation techniques were applied to reconcile differing perspectives across industry segments and geographic regions, ensuring that thematic conclusions reflect both technical realities and commercial considerations.

Quality assurance procedures included independent expert reviews of key technical assumptions, scenario testing for supply-chain sensitivity, and reconciliation of terminology across disciplines to avoid ambiguous interpretation. Where models are used to compare design trade-offs such as coupling efficiency versus alignment tolerance, assumptions are explicitly documented and validated with domain experts. This approach balances breadth and depth: it incorporates hands-on practitioner insight while maintaining rigorous documentation and traceability for stakeholders who require transparent methodological underpinnings for strategic decisions.

Concise concluding synthesis articulating strategic implications, persistent challenges, convergence opportunities, and near-term priorities for executives navigating contactless power ecosystems

In synthesis, contactless power transmission represents a convergent technology arena where material science, power electronics, regulatory frameworks, and commercial models intersect. The persistent challenges-such as alignment sensitivity, electromagnetic compatibility, certification complexity, and supply-chain fragility-are balanced by compelling opportunities in automotive electrification, consumer convenience, healthcare device innovation, and industrial automation. Strategic winners will not only demonstrate superior technical performance but will also excel at ecosystem orchestration, standards participation, and manufacturing flexibility.

Going forward, decision-makers should emphasize pragmatic proof points: reliable field demonstrations, clear safety and certification pathways, and resilient sourcing strategies that reduce exposure to trade policy volatility. By aligning technology choices with application-specific requirements and regional regulatory realities, organizations can accelerate adoption while containing deployment risk. The conclusion stresses that sustained success will come from integrated approaches that marry engineering excellence with deliberate commercial and policy engagement, enabling contactless power solutions to move from selective pilots to pervasive, mission-critical deployments.

Table of Contents

1. Preface

• 1.1. Objectives of the Study
• 1.2. Market Definition
• 1.3. Market Segmentation & Coverage
• 1.4. Years Considered for the Study
• 1.5. Currency Considered for the Study
• 1.6. Language Considered for the Study
• 1.7. Key Stakeholders

2. Research Methodology

• 2.1. Introduction
• 2.2. Research Design
  • 2.2.1. Primary Research
  • 2.2.2. Secondary Research
• 2.3. Research Framework
  • 2.3.1. Qualitative Analysis
  • 2.3.2. Quantitative Analysis
• 2.4. Market Size Estimation
  • 2.4.1. Top-Down Approach
  • 2.4.2. Bottom-Up Approach
• 2.5. Data Triangulation
• 2.6. Research Outcomes
• 2.7. Research Assumptions
• 2.8. Research Limitations

3. Executive Summary

• 3.1. Introduction
• 3.2. CXO Perspective
• 3.3. Market Size & Growth Trends
• 3.4. Market Share Analysis, 2025
• 3.5. FPNV Positioning Matrix, 2025
• 3.6. New Revenue Opportunities
• 3.7. Next-Generation Business Models
• 3.8. Industry Roadmap

4. Market Overview

• 4.1. Introduction
• 4.2. Industry Ecosystem & Value Chain Analysis
  • 4.2.1. Supply-Side Analysis
  • 4.2.2. Demand-Side Analysis
  • 4.2.3. Stakeholder Analysis
• 4.3. Porter's Five Forces Analysis
• 4.4. PESTLE Analysis
• 4.5. Market Outlook
  • 4.5.1. Near-Term Market Outlook (0-2 Years)
  • 4.5.2. Medium-Term Market Outlook (3-5 Years)
  • 4.5.3. Long-Term Market Outlook (5-10 Years)
• 4.6. Go-to-Market Strategy

5. Market Insights

• 5.1. Consumer Insights & End-User Perspective
• 5.2. Consumer Experience Benchmarking
• 5.3. Opportunity Mapping
• 5.4. Distribution Channel Analysis
• 5.5. Pricing Trend Analysis
• 5.6. Regulatory Compliance & Standards Framework
• 5.7. ESG & Sustainability Analysis
• 5.8. Disruption & Risk Scenarios
• 5.9. Return on Investment & Cost-Benefit Analysis

6. Cumulative Impact of United States Tariffs 2025

7. Cumulative Impact of Artificial Intelligence 2025

8. Contactless Power Transmission Market, by Technology

• 8.1. Capacitive Coupling
  • 8.1.1. Air-Gap Capacitive
  • 8.1.2. Embedded Capacitive
• 8.2. Inductive Coupling
  • 8.2.1. Far-Field Inductive
  • 8.2.2. Near-Field Inductive
• 8.3. Magnetic Resonance
  • 8.3.1. Multi Coil
  • 8.3.2. Single Coil
• 8.4. Resonant Inductive Coupling
  • 8.4.1. Strong Coupling
  • 8.4.2. Weak Coupling

9. Contactless Power Transmission Market, by Power Rating

• 9.1. High Power
• 9.2. Low Power
• 9.3. Medium Power
• 9.4. Ultra-High Power

10. Contactless Power Transmission Market, by Frequency Range

• 10.1. High Frequency
• 10.2. Low Frequency
• 10.3. Very High Frequency

11. Contactless Power Transmission Market, by Transmission Distance

• 11.1. Long Distance
• 11.2. Medium Distance
• 11.3. Short Distance

12. Contactless Power Transmission Market, by Application

• 12.1. Automotive
  • 12.1.1. Charging Stations
  • 12.1.2. Electric Vehicle Charging
  • 12.1.3. In-Vehicle Devices
• 12.2. Consumer Electronics
  • 12.2.1. Smartphones & Tablets
  • 12.2.2. Wearable Devices
  • 12.2.3. Wireless Charging Pads
• 12.3. Healthcare
  • 12.3.1. Medical Implants
  • 12.3.2. Patient Monitoring
• 12.4. Industrial
  • 12.4.1. Factory Automation
  • 12.4.2. Robotics

13. Contactless Power Transmission Market, by End User Industry

• 13.1. Automotive
• 13.2. Consumer Electronics
• 13.3. Healthcare
• 13.4. Industrial

14. Contactless Power Transmission Market, by Region

• 14.1. Americas
  • 14.1.1. North America
  • 14.1.2. Latin America
• 14.2. Europe, Middle East & Africa
  • 14.2.1. Europe
  • 14.2.2. Middle East
  • 14.2.3. Africa
• 14.3. Asia-Pacific

15. Contactless Power Transmission Market, by Group

• 15.1. ASEAN
• 15.2. GCC
• 15.3. European Union
• 15.4. BRICS
• 15.5. G7
• 15.6. NATO

16. Contactless Power Transmission Market, by Country

• 16.1. United States
• 16.2. Canada
• 16.3. Mexico
• 16.4. Brazil
• 16.5. United Kingdom
• 16.6. Germany
• 16.7. France
• 16.8. Russia
• 16.9. Italy
• 16.10. Spain
• 16.11. China
• 16.12. India
• 16.13. Japan
• 16.14. Australia
• 16.15. South Korea

17. United States Contactless Power Transmission Market

18. China Contactless Power Transmission Market

19. Competitive Landscape

• 19.1. Market Concentration Analysis, 2025
  • 19.1.1. Concentration Ratio (CR)
  • 19.1.2. Herfindahl Hirschman Index (HHI)
• 19.2. Recent Developments & Impact Analysis, 2025
• 19.3. Product Portfolio Analysis, 2025
• 19.4. Benchmarking Analysis, 2025
• 19.5. Apple Inc.
• 19.6. Broadcom Inc.
• 19.7. Energous Corporation
• 19.8. Infineon Technologies AG
• 19.9. Murata Manufacturing Co., Ltd.
• 19.10. NXP Semiconductors N.V.
• 19.11. Ossia Inc.
• 19.12. Panasonic Corporation
• 19.13. Plugless Power Inc.
• 19.14. Powercast Corporation
• 19.15. Powermat Technologies Ltd.
• 19.16. Qualcomm Incorporated
• 19.17. Renesas Electronics Corporation
• 19.18. ROHM Semiconductor Co., Ltd.
• 19.19. Samsung Electronics Co., Ltd.
• 19.20. Sony Corporation
• 19.21. STMicroelectronics N.V.
• 19.22. TDK Corporation
• 19.23. Texas Instruments Incorporated
• 19.24. Wi-Botic Inc.
• 19.25. WiTricity Corporation