단일 열 볼 베어링 시장 - 예측(2026-2031년)

Single Row Ball Bearing Market is projected to expand at a 4.23% CAGR, achieving USD 13.523 billion in 2031 from USD 10.547 billion in 2025.

Single-row ball bearings-comprising deep-groove and angular-contact variants-remain the most widely specified rolling-element bearing for applications requiring compact envelope, moderate to high radial/axial load capacity, and rotational speeds up to 50,000 rpm. Deep-groove designs dominate general-purpose electric-motor and appliance duties, while single-row angular-contact bearings (typically 15°, 25°, or 40° contact angles) are the default choice where combined loads or moment stiffness are critical, such as gantry axes, spindle drives, and medical gantry rings.

Electric motors continue to drive the overwhelming majority of global volume. The secular shift toward higher-efficiency IE3/IE4 and permanent-magnet synchronous motors-combined with explosive growth in EV traction motors, e-axle units, and on-board auxiliaries-has dramatically increased socket count per vehicle and raised performance requirements. Bearings must now routinely withstand 160-180 °C continuous operation, 20,000+ rpm peak speeds, and inverter-induced electrical discharge while maintaining <5 µm runout and noise levels below 35 dB(A). Hybrid ceramic (silicon-nitride balls) and high-nitrogen martensitic steel variants are rapidly gaining share in premium EV and industrial segments.

Medical diagnostic equipment represents the second major growth pillar. High-resolution CT and MRI gantries, robotic surgical arms, and linear accelerator positioners demand ultra-low vibration, sub-micron repeatability, and near-silent operation. Single-row angular-contact bearings in back-to-back or face-to-face duplex sets-often preloaded and fitted with non-metallic cages-are the standard solution for achieving the required stiffness and rotational accuracy. The parallel proliferation of portable ultrasound, digital X-ray, and robotic endoscopy platforms is creating new demand for miniature and thin-section designs.

Asia-Pacific has solidified its position as both the largest consumer and fastest-growing region. China alone accounts for >50 % of global EV production and the majority of world electric-motor output, translating directly into tens of millions of additional high-specification bearings annually. Japan and South Korea maintain leadership in precision medical gantry bearings, while India's accelerating domestic medical-device manufacturing and EV component localization are adding meaningful incremental volume. Regional bearing manufacturers have closed the quality gap in standard deep-groove lines, but premium angular-contact, ceramic-hybrid, and sensor-integrated "smart" bearings remain largely supplied by established global Tier-1 players.

Technology roadmaps are converging on four critical themes:

1. Electrification readiness-high-nitrogen steels (Cronidur 30, XD15NW), ceramic balls, and conductive micro-fiber cages to mitigate EDM damage.

2. Integrated sensing-magnetized encoder rings and thin-dense chrome coatings for direct speed/position feedback without separate sensors.

3. Higher speed capability-advanced polymeric cages (PEEK, Vespel) and oil-mist or grease-packed-for-life lubrication for 2.0-3.0 X 106 dn values.

4. Sustainability-re-lubrication ports, low-friction seals, and recyclable cage materials to support circular-economy mandates.

Competitive dynamics increasingly reward suppliers capable of delivering complete preloaded duplex/triplex sets with matched bore and OD tolerances, traceable serialization, and embedded digital birth certificates. OEMs are consolidating vendor lists to reduce supply-chain risk and streamline functional-safety validation (ISO 26262 ASIL-B/D for automotive, IEC 60601-1 for medical).

Supply constraints remain modest but center on high-nitrogen stainless steels and Grade 3/5 silicon-nitride ceramic balls, where qualified capacity is limited and lead times can extend to 26-40 weeks during EV ramp cycles. Hybrid-bearing pricing has fallen >30 % in real terms over the past five years yet remains 3-5X standard steel equivalents, preserving healthy margins for specialist manufacturers.

For procurement and engineering teams, total-cost-of-ownership models now routinely justify premium bearing selection when factoring reduced warranty exposure, extended motor life, and elimination of external speed sensors. Strategic partnerships that secure capacity allocation and co-develop next-generation ceramic-hybrid and sensor-bearing solutions are becoming standard practice among Tier-1 automotive and medical OEMs.

Overall, single-row ball bearings occupy an exceptionally strong structural position: non-substitutable core component in the world's two fastest-growing precision-motion sectors (electrification and medical diagnostics), clear performance roadmaps that outpace alternative technologies, and technical barriers that continue to widen. Manufacturers combining materials expertise, high-volume precision grinding, and integrated sensing capability are positioned for sustained double-digit growth and resilient margins in this critical enabling category.

Key Benefits of this Report:

• Insightful Analysis: Gain detailed market insights covering major as well as emerging geographical regions, focusing on customer segments, government policies and socio-economic factors, consumer preferences, industry verticals, and other sub-segments.
• Competitive Landscape: Understand the strategic maneuvers employed by key players globally to understand possible market penetration with the correct strategy.
• Market Drivers & Future Trends: Explore the dynamic factors and pivotal market trends and how they will shape future market developments.
• Actionable Recommendations: Utilize the insights to exercise strategic decisions to uncover new business streams and revenues in a dynamic environment.
• Caters to a Wide Audience: Beneficial and cost-effective for startups, research institutions, consultants, SMEs, and large enterprises.

What do businesses use our reports for?

Industry and Market Insights, Opportunity Assessment, Product Demand Forecasting, Market Entry Strategy, Geographical Expansion, Capital Investment Decisions, Regulatory Framework & Implications, New Product Development, Competitive Intelligence

Report Coverage:

• Historical data from 2021 to 2025 & forecast data from 2026 to 2031
• Growth Opportunities, Challenges, Supply Chain Outlook, Regulatory Framework, and Trend Analysis
• Competitive Positioning, Strategies, and Market Share Analysis
• Revenue Growth and Forecast Assessment of segments and regions including countries
• Company Profiling (Strategies, Products, Financial Information), and Key Developments among others.

Segmentation:

• By Type
• Single Row Deep Groove
• Single Row Angular Contact
• By Application
• Medical Diagnostic Equipment
• Electrical Motors
• Thermal Imaging Cameras
• Optical Encoders
• Others
• By Material
• Steel
• Ceramic
• By Geography
• North America
• USA
• Canada
• Mexico
• South America
• Brazil
• Argentina
• Others
• Europe
• Germany
• France
• United Kingdom
• Spain
• Others
• Middle East and Africa
• Saudi Arabia
• UAE
• Others
• Asia Pacific
• China
• India
• Japan
• South Korea
• Indonesia
• Thailand
• Others

TABLE OF CONTENTS

1. EXECUTIVE SUMMARY

2. MARKET SNAPSHOT

• 2.1. Market Overview
• 2.2. Market Definition
• 2.3. Scope of the Study
• 2.4. Market Segmentation

3. BUSINESS LANDSCAPE

• 3.1. Market Drivers
• 3.2. Market Restraints
• 3.3. Market Opportunities
• 3.4. Porter's Five Forces Analysis
• 3.5. Industry Value Chain Analysis
• 3.6. Policies and Regulations
• 3.7. Strategic Recommendations

4. TECHNOLOGICAL OUTLOOK

5. SINGLE ROW BALL BEARING MARKET BY TYPE

• 5.1. Introduction
• 5.2. Single Row Deep Groove
• 5.3. Single Row Angular Contact

6. SINGLE ROW BALL BEARING MARKET BY APPLICATION

• 6.1. Introduction
• 6.2. Medical Diagnostic Equipment
• 6.3. Electrical Motors
• 6.4. Thermal Imaging Cameras
• 6.5. Optical Encoders
• 6.6. Others

7. SINGLE ROW BALL BEARING MARKET BY MATERIAL

• 7.1. Introduction
• 7.2. Steel
• 7.3. Ceramic

8. SINGLE ROW BALL BEARING MARKET BY GEOGRAPHY

• 8.1. Introduction
• 8.2. North America
  • 8.2.1. USA
  • 8.2.2. Canada
  • 8.2.3. Mexico
• 8.3. South America
  • 8.3.1. Brazil
  • 8.3.2. Argentina
  • 8.3.3. Others
• 8.4. Europe
  • 8.4.1. Germany
  • 8.4.2. France
  • 8.4.3. United Kingdom
  • 8.4.4. Spain
  • 8.4.5. Others
• 8.5. Middle East and Africa
  • 8.5.1. Saudi Arabia
  • 8.5.2. UAE
  • 8.5.3. Others
• 8.6. Asia Pacific
  • 8.6.1. China
  • 8.6.2. India
  • 8.6.3. Japan
  • 8.6.4. South Korea
  • 8.6.5. Indonesia
  • 8.6.6. Thailand
  • 8.6.7. Others

9. COMPETITIVE ENVIRONMENT AND ANALYSIS

• 9.1. Major Players and Strategy Analysis
• 9.2. Market Share Analysis
• 9.3. Mergers, Acquisitions, Agreements, and Collaborations
• 9.4. Competitive Dashboard

10. COMPANY PROFILES

• 10.1. JTEKT Corporation
• 10.2. KG Bearing
• 10.3. NACHI-FUJIKOSHI CORP
• 10.4. NBC Bearing Company (CK Birla Group)
• 10.5. NSK Americas (NSK Ltd.)
• 10.6. NTN Corporation
• 10.7. RBC Bearing Incorporated
• 10.8. SKF
• 10.9. Timken Company

11. APPENDIX

• 11.1. Currency
• 11.2. Assumptions
• 11.3. Base and Forecast Years Timeline
• 11.4. Key Benefits for the Stakeholders
• 11.5. Research Methodology
• 11.6. Abbreviations