나일론 66 시장 보고서 : 동향, 예측 및 경쟁 분석(-2031년)

The future of the global nylon 66 market looks promising with opportunities in the textile, industrial/machinery, carpet, automotive, consumer good & appliance, electrical & electronics, packaging, and film & coating markets. The global nylon 66 market is expected to grow with a CAGR of 3.2% from 2025 to 2031. The major drivers for this market are the increasing demand for high-performance automotive parts, the rising use in industrial fiber production, and the growing adoption in consumer electronics manufacturing.

• Lucintel forecasts that, within the grade category, fiber is expected to witness higher growth over the forecast period.
• Within the application category, automotive is expected to witness the highest growth.
• In terms of region, APAC is expected to witness the highest growth over the forecast period.

Emerging Trends in the Nylon 66 Market

The nylon 66 market is being reshaped by several key trends, moving it towards a more sustainable and technologically advanced future. These trends are driven by a combination of evolving industry needs, consumer demands for eco-friendly products, and a global push for greater efficiency and performance. They are fundamentally altering how nylon 66 is produced and applied.

• Shift to Lightweighting in Vehicles: A primary trend is the increasing use of nylon 66 to replace metal components in automobiles. This is driven by the need to reduce vehicle weight, which improves fuel efficiency in traditional cars and extends the range of electric vehicles. The impact is a massive growth in the automotive application segment for high-strength, glass-filled nylon 66.
• Rise of Sustainable and Recycled Grades: There is a growing trend towards developing and commercializing recycled and bio-based nylon 66. This is a direct response to rising environmental concerns and corporate sustainability goals. The impact is the creation of new, eco-friendly product lines that command a premium, attracting environmentally conscious consumers and companies in the textile and automotive industries.
• Increased Adoption in Electronics: Nylon 66 is increasingly being adopted in the electrical and electronics industries for connectors, circuit breakers, and insulation. Its excellent electrical insulation properties, flame retardancy, and heat resistance make it an ideal material for these applications. The impact is a new, high-growth market segment driven by the proliferation of consumer electronics and electric vehicles.
• Focus on High-Performance Composites: A key trend is the development of high-performance nylon 66 composites with enhanced properties like improved strength, stiffness, and heat resistance. These composites, often reinforced with glass or carbon fiber, are replacing traditional materials in demanding applications. The impact is a move away from commodity grades towards a more specialized, high-value market.
• Advancements in 3D Printing: Nylon 66 is gaining traction as a material for 3D printing filaments. This trend is driven by its excellent mechanical properties, durability, and printability, making it suitable for creating complex, custom parts for prototyping and small-scale manufacturing. The impact is an expansion into the rapidly growing additive manufacturing sector.

These trends are fundamentally reshaping the nylon 66 market by pushing it towards a more specialized, sustainable, and high-tech future. The focus on lightweight and high-performance materials in key industries like automotive and electronics is creating new value propositions. This evolution is positioning the market as a leader in advanced materials, capable of meeting the demands of a modern, efficiency-driven economy.

Recent Developments in the Nylon 66 Market

The nylon 66 market is undergoing several key developments, shaped by global economic shifts, technological innovations, and evolving regulatory frameworks. These changes are impacting everything from product formulations to strategic market positioning, demonstrating the industry's dynamic nature and its adaptation to modern challenges.

• Expansion of Production Capacity: A significant development is the ongoing expansion of nylon 66 production capacity, particularly in the Asia-Pacific region. Major manufacturers are investing in new plants to meet the surging demand from the automotive and electronics sectors. The impact is a more robust global supply chain, which helps to mitigate supply shortages and stabilize prices.
• Focus on Lightweight Automotive Parts: The automotive industry is a major driver of recent developments, with a strong focus on using nylon 66 to manufacture lightweight vehicle components. This is a direct response to stricter fuel efficiency and emissions standards. The impact is a growing, high-volume market for nylon 66 that is essential for modern vehicle design, including for electric vehicles.
• Development of Recycled Nylon: A key development is the increasing focus on developing recycled and post-consumer nylon 66 grades. This is driven by corporate sustainability goals and consumer demand for eco-friendly products. The impact is a new, environmentally friendly market segment that helps reduce the industry's carbon footprint and create a more circular economy.
• Strategic Mergers and Acquisitions: Recent developments include major corporate players engaging in mergers and acquisitions to consolidate their market share and expand their product portfolios. This strategy is aimed at strengthening their competitive position and leveraging new technologies. The impact is a consolidation of the market and a more efficient distribution network for specialty nylon grades.
• Innovation in Flame-Retardant Grades: There has been significant innovation in the development of flame-retardant nylon 66 grades. These new formulations are crucial for applications in the electronics and electrical industries, where fire safety is paramount. The impact is an expansion of the market into high-tech, safety-critical applications.

These developments are having a profound impact on the nylon 66 market. The rise of lightweight and recycled grades ensures continued growth, while the focus on capacity expansion and strategic consolidation is pushing the industry toward a more efficient and competitive future. This evolution is positioning the market to meet the demands of a technically advanced and sustainability-conscious global economy.

Strategic Growth Opportunities in the Nylon 66 Market

The nylon 66 market offers numerous strategic growth opportunities across key applications, driven by its unique combination of properties and the evolving needs of various industries. By focusing on these high-potential areas, companies can differentiate their products and capture a greater share of the market. The key lies in leveraging nylon 66's strengths in durability and performance.

• Automotive Industry: The automotive industry presents the largest growth opportunity. Nylon 66 is ideal for manufacturing under-the-hood components, fuel system parts, and interior elements. The global push for lightweighting and the growing market for electric vehicles, where battery efficiency is critical, are creating a massive and sustained demand for nylon 66.
• Electrical and Electronics: The electrical and electronics industries offer a significant growth opportunity. Nylon 66's excellent electrical insulation, heat resistance, and flame retardancy make it perfect for connectors, circuit breakers, and cable ties. The proliferation of consumer electronics and the expansion of data centers are fueling this demand.
• Textiles and Apparel: The textiles and apparel industry provides a stable growth opportunity, particularly in technical textiles and activewear. Nylon 66's high tensile strength, elasticity, and abrasion resistance make it a preferred material for sportswear, luggage, and industrial fabrics. The demand for durable and high-performance textiles is driving this segment.
• Industrial and Machinery: The industrial and machinery sector offers a key growth opportunity. Nylon 66 is used in gears, bearings, and other moving parts due to its excellent wear resistance and low friction. The opportunity lies in developing new grades that can handle extreme conditions, extending the lifespan of machinery and reducing maintenance costs.
• Consumer Goods and Appliances: The consumer goods and appliances market is a stable growth opportunity. Nylon 66 is used in products like kitchen utensils, power tool housings, and furniture components. Its durability and strength make it a versatile material for these applications. The growing disposable income in emerging economies is boosting this market.

These strategic growth opportunities are impacting the nylon 66 market by shifting its focus from a single-application commodity to a diversified portfolio of high-value uses. By strategically targeting high-growth sectors like automotive and electronics, companies can command higher prices and increase profitability. This shift is transforming the market into a more dynamic and resilient industry, capable of meeting the evolving needs of modern manufacturing.

Nylon 66 Market Driver and Challenges

The nylon 66 market is shaped by a complex interplay of major drivers and significant challenges. These forces are influencing its growth trajectory, pushing the industry to innovate while also creating hurdles related to raw material costs, competition, and sustainability. A clear understanding of these dynamics is essential for any business operating in this market.

The factors responsible for driving the nylon 66 market include:

1. Automotive Lightweighting: A primary driver is the global trend of lightweighting in the automotive industry. As regulations for fuel efficiency and emissions become stricter, and as the electric vehicle market expands, nylon 66 is increasingly used to replace heavier metal parts. This is a massive and sustained demand driver.

2. Growth of Electronics Industry: The rapid growth of the global electronics industry is a key driver. Nylon 66's excellent electrical and thermal properties make it indispensable for manufacturing connectors, switches, and other components in a wide range of electronic devices and appliances.

3. Superior Mechanical Properties: Nylon 66 possesses a unique combination of high tensile strength, excellent abrasion resistance, and high melting point. These superior mechanical properties make it a preferred material for demanding engineering applications, ensuring its continued use across multiple industrial sectors, from textiles to machinery.

4. Urbanization and Industrialization: Rapid urbanization and industrialization in emerging economies, particularly in Asia-Pacific, are major drivers. This trend is increasing demand for a wide range of goods that use nylon 66, including cars, consumer appliances, and industrial machinery, contributing significantly to market growth.

5. Increasing Demand for Technical Textiles: The rising demand for high-performance technical textiles is a significant driver. Nylon 66's durability and strength make it an ideal material for applications such as airbags, seat belts, and industrial fabrics, which are experiencing robust growth.

Challenges in the nylon 66 market are:

1. Volatile Raw Material Prices: A major challenge is the price volatility of key raw materials, particularly adiponitrile, which is derived from petroleum. Fluctuations in crude oil prices can directly impact the cost of nylon 66 production and its profitability, making it difficult for manufacturers to maintain stable pricing.

2. Competition from Substitutes: The market faces significant competition from other engineering plastics like nylon 6, polypropylene, and PBT. While nylon 66 offers superior properties for specific applications, these substitutes can be more cost-effective for other uses, limiting nylon 66's market share in some segments.

3. Sustainability and Environmental Concerns: There is growing pressure to address the environmental impact of nylon production, from its reliance on fossil fuels to the challenge of recycling. This is pushing companies to invest in more sustainable production methods and bio-based alternatives, which can be costly and technically challenging.

The overall impact of these drivers and challenges is a market in a state of flux. While strong demand from key industries ensures sustained growth, the industry must proactively address its reliance on volatile raw materials and its environmental footprint. The market's future will be defined by its ability to balance its performance advantages with a commitment to sustainability, cost-effectiveness, and innovation.

List of Nylon 66 Companies

Companies in the market compete on the basis of product quality offered. Major players in this market focus on expanding their manufacturing facilities, R&D investments, infrastructural development, and leverage integration opportunities across the value chain. With these strategies nylon 66 companies cater increasing demand, ensure competitive effectiveness, develop innovative products & technologies, reduce production costs, and expand their customer base. Some of the nylon 66 companies profiled in this report include-

• UBE Corporation
• BASF
• Dow
• Asahi Kasei Corporation
• Celanese Corporation
• Lanxess
• Ascend Performance Materials
• DSM
• Radici Partecipazioni
• Ensinger

Nylon 66 Market by Segment

The study includes a forecast for the global nylon 66 market by grade, application, and region.

Nylon 66 Market by Grade [Value from 2019 to 2031]:

• Resin Grade
• Fiber Grade

Nylon 66 Market by Application [Value from 2019 to 2031]:

• Textiles
• Industrial/Machinery
• Carpets
• Automotive
• Consumer Goods & Appliances
• Electrical & Electronics
• Packaging
• Films & Coatings
• Others

Nylon 66 Market by Region [Value from 2019 to 2031]:

• North America
• Europe
• Asia Pacific
• The Rest of the World

Country Wise Outlook for the Nylon 66 Market

The nylon 66 market is undergoing a significant transformation, driven by a global push for lightweight materials, sustainability, and high-performance applications. With its superior mechanical strength and heat resistance, nylon 66 is becoming a key material in the automotive, electrical, and electronics sectors. These developments are shaping regional market strategies and influencing a broader shift toward advanced engineering polymers.

• United States: The U.S. market is a major consumer, with recent developments focusing on high-performance grades for the automotive and electrical industries. There's a strong emphasis on using nylon 66 to produce lightweight components for electric vehicles (EVs) to improve battery range and efficiency. Companies are also investing in production capacity to meet this rising domestic demand.
• China: China is the world's largest producer and consumer, and its recent developments are characterized by a massive capacity expansion to meet domestic and export demands. The country is a key player in the automotive and electronics sectors, using nylon 66 for components that require high strength and heat resistance. Chinese manufacturers are also moving toward higher-quality grades.
• Germany: Germany's market is highly specialized, driven by its world-class automotive industry. Recent developments include the use of advanced, glass fiber-reinforced nylon 66 for under-the-hood applications, where it replaces metal to reduce vehicle weight and improve fuel efficiency. German manufacturers are also developing innovative formulations to meet stringent EU regulations.
• India: India's nylon 66 market is experiencing rapid growth, fueled by its expanding automotive and electrical sectors. Recent developments include a focus on domestic production to reduce import reliance. As the country's manufacturing and infrastructure sectors grow, so does the demand for durable and high-performance engineering plastics, creating a new, dynamic market for nylon 66.
• Japan: Japan's market is mature and technology-driven, with a strong focus on high-purity nylon 66 for specialized applications. Recent developments include its use in high-tech electronics, consumer appliances, and precision components. Japanese manufacturers are also at the forefront of research into sustainable nylon 66 solutions, including bio-based and recycled materials.

Features of the Global Nylon 66 Market

• Market Size Estimates: Nylon 66 market size estimation in terms of value ($B).
• Trend and Forecast Analysis: Market trends (2019 to 2024) and forecast (2025 to 2031) by various segments and regions.
• Segmentation Analysis: Nylon 66 market size by grade, application, and region in terms of value ($B).
• Regional Analysis: Nylon 66 market breakdown by North America, Europe, Asia Pacific, and Rest of the World.
• Growth Opportunities: Analysis of growth opportunities in different grades, applications, and regions for the nylon 66 market.
• Strategic Analysis: This includes M&A, new product development, and competitive landscape of the nylon 66 market.

Analysis of competitive intensity of the industry based on Porter's Five Forces model.

This report answers following 11 key questions:

• Q.1. What are some of the most promising, high-growth opportunities for the nylon 66 market by grade (resin grade and fiber grade), application (textiles, industrial/machinery, carpets, automotive, consumer goods & appliances, electrical & electronics, packaging, films & coatings, and others), and region (North America, Europe, Asia Pacific, and the Rest of the World)?
• Q.2. Which segments will grow at a faster pace and why?
• Q.3. Which region will grow at a faster pace and why?
• Q.4. What are the key factors affecting market dynamics? What are the key challenges and business risks in this market?
• Q.5. What are the business risks and competitive threats in this market?
• Q.6. What are the emerging trends in this market and the reasons behind them?
• Q.7. What are some of the changing demands of customers in the market?
• Q.8. What are the new developments in the market? Which companies are leading these developments?
• Q.9. Who are the major players in this market? What strategic initiatives are key players pursuing for business growth?
• Q.10. What are some of the competing products in this market and how big of a threat do they pose for loss of market share by material or product substitution?
• Q.11. What M&A activity has occurred in the last 5 years and what has its impact been on the industry?

Table of Contents

1. Executive Summary

2. Market Overview

• 2.1 Background and Classifications
• 2.2 Supply Chain

3. Market Trends & Forecast Analysis

• 3.1 Macroeconomic Trends and Forecasts
• 3.2 Industry Drivers and Challenges
• 3.3 PESTLE Analysis
• 3.4 Patent Analysis
• 3.5 Regulatory Environment

4. Global Nylon 66 Market by Grade

• 4.1 Overview
• 4.2 Attractiveness Analysis by Grade
• 4.3 Resin Grade : Trends and Forecast (2019-2031)
• 4.4 Fiber Grade : Trends and Forecast (2019-2031)

5. Global Nylon 66 Market by Application

• 5.1 Overview
• 5.2 Attractiveness Analysis by Application
• 5.3 Textiles : Trends and Forecast (2019-2031)
• 5.4 Industrial/Machinery : Trends and Forecast (2019-2031)
• 5.5 Carpets : Trends and Forecast (2019-2031)
• 5.6 Automotive : Trends and Forecast (2019-2031)
• 5.7 Consumer Goods & Appliances : Trends and Forecast (2019-2031)
• 5.8 Electrical & Electronics : Trends and Forecast (2019-2031)
• 5.9 Packaging : Trends and Forecast (2019-2031)
• 5.10 Films & Coatings : Trends and Forecast (2019-2031)
• 5.11 Others : Trends and Forecast (2019-2031)

6. Regional Analysis

• 6.1 Overview
• 6.2 Global Nylon 66 Market by Region

7. North American Nylon 66 Market

• 7.1 Overview
• 7.2 North American Nylon 66 Market by Grade
• 7.3 North American Nylon 66 Market by Application
• 7.4 The United States Nylon 66 Market
• 7.5 Canadian Nylon 66 Market
• 7.6 Mexican Nylon 66 Market

8. European Nylon 66 Market

• 8.1 Overview
• 8.2 European Nylon 66 Market by Grade
• 8.3 European Nylon 66 Market by Application
• 8.4 German Nylon 66 Market
• 8.5 French Nylon 66 Market
• 8.6 Italian Nylon 66 Market
• 8.7 Spanish Nylon 66 Market
• 8.8 The United Kingdom Nylon 66 Market

9. APAC Nylon 66 Market

• 9.1 Overview
• 9.2 APAC Nylon 66 Market by Grade
• 9.3 APAC Nylon 66 Market by Application
• 9.4 Chinese Nylon 66 Market
• 9.5 Indian Nylon 66 Market
• 9.6 Japanese Nylon 66 Market
• 9.7 South Korean Nylon 66 Market
• 9.8 Indonesian Nylon 66 Market

10. ROW Nylon 66 Market

• 10.1 Overview
• 10.2 ROW Nylon 66 Market by Grade
• 10.3 ROW Nylon 66 Market by Application
• 10.4 Middle Eastern Nylon 66 Market
• 10.5 South American Nylon 66 Market
• 10.6 African Nylon 66 Market

11. Competitor Analysis

• 11.1 Product Portfolio Analysis
• 11.2 Operational Integration
• 11.3 Porter's Five Forces Analysis
  • Competitive Rivalry
  • Bargaining Power of Buyers
  • Bargaining Power of Suppliers
  • Threat of Substitutes
  • Threat of New Entrants
• 11.4 Market Share Analysis

12. Opportunities & Strategic Analysis

• 12.1 Value Chain Analysis
• 12.2 Growth Opportunity Analysis
  • 12.2.1 Growth Opportunity by Grade
  • 12.2.2 Growth Opportunity by Application
• 12.3 Emerging Trends in the Global Nylon 66 Market
• 12.4 Strategic Analysis
  • 12.4.1 New Product Development
  • 12.4.2 Certification and Licensing
  • 12.4.3 Mergers, Acquisitions, Agreements, Collaborations, and Joint Ventures

13. Company Profiles of the Leading Players Across the Value Chain

• 13.1 Competitive Analysis
• 13.2 UBE Corporation
  • Company Overview
  • Nylon 66 Market Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.3 BASF
  • Company Overview
  • Nylon 66 Market Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.4 Dow
  • Company Overview
  • Nylon 66 Market Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.5 Asahi Kasei Corporation
  • Company Overview
  • Nylon 66 Market Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.6 Celanese Corporation
  • Company Overview
  • Nylon 66 Market Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.7 Lanxess
  • Company Overview
  • Nylon 66 Market Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.8 Ascend Performance Materials
  • Company Overview
  • Nylon 66 Market Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.9 DSM
  • Company Overview
  • Nylon 66 Market Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.10 Radici Partecipazioni
  • Company Overview
  • Nylon 66 Market Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.11 Ensinger
  • Company Overview
  • Nylon 66 Market Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing

14. Appendix

• 14.1 List of Figures
• 14.2 List of Tables
• 14.3 Research Methodology
• 14.4 Disclaimer
• 14.5 Copyright
• 14.6 Abbreviations and Technical Units
• 14.7 About Us
• 14.8 Contact Us