방수 혼화제 시장 보고서 : 동향, 예측 및 경쟁 분석(-2035년)

Waterproofing Admixture Market

The future of the global waterproofing admixture market looks promising with opportunities in the residential, commercial, and infrastructure markets. The global waterproofing admixture market is expected to reach an estimated $7.7 billion by 2035 with a CAGR of 4.4% from 2026 to 2035. The major drivers for this market are the rising demand for leak proof & crack resistant structures, the increasing use of advanced construction chemicals in projects, and the growing renovation & repair activities in old buildings.

• Lucintel forecasts that, within the type category, crystalline waterproofing admixture is expected to witness higher growth over the forecast period due to the rising demand for durable concrete waterproofing.
• Within the end use category, infrastructure is expected to witness the highest growth due to the increasing infrastructure development and urban construction projects.
• In terms of regions, APAC is expected to witness the highest growth over the forecast period due to the rapid industrialization and massive construction investments.

Emerging Trends in Waterproofing Admixture Market

The waterproofing admixture market is experiencing rapid growth driven by increasing infrastructure development, urbanization, and the need for durable, water-resistant construction materials. Innovations in chemical formulations and a focus on sustainable solutions are shaping the industry landscape. As construction standards evolve and environmental concerns become more prominent, market players are adopting advanced technologies to meet demand. These trends are not only enhancing product performance but also expanding application areas across residential, commercial, and industrial sectors. The following key trends highlight the dynamic changes influencing the waterproofing admixture market and its future trajectory.

• Growing Demand for Eco-Friendly Solutions: The market is witnessing a shift towards environmentally sustainable waterproofing admixtures. Consumers and regulators are emphasizing low VOC emissions, non-toxic ingredients, and recyclable materials. Manufacturers are investing in green chemistry to develop products that reduce environmental impact without compromising performance. This trend is driven by stricter environmental regulations and increasing awareness among consumers about sustainability. As a result, eco-friendly admixtures are gaining popularity, opening new opportunities for market expansion and differentiation.
• Technological Advancements in Formulations: Innovation in chemical formulations is a significant trend shaping the market. Advanced admixtures now offer enhanced water repellency, improved adhesion, and longer durability. The integration of nanotechnology and polymer modifications has led to products with superior performance characteristics. These technological improvements enable construction projects to achieve higher standards of water resistance and longevity, reducing maintenance costs. The continuous R&D efforts are fostering the development of smarter, more efficient admixtures that meet diverse application needs.
• Rising Adoption in Infrastructure Projects: Governments and private sectors are increasingly incorporating waterproofing admixtures in large-scale infrastructure projects such as tunnels, bridges, and water treatment plants. The demand is driven by the need for structures that withstand harsh environmental conditions and have extended service life. This trend is supported by government initiatives promoting sustainable infrastructure and urban development. The adoption of waterproofing admixtures in such projects is boosting market growth and encouraging the development of specialized formulations tailored for complex engineering requirements.
• Expansion of Application Areas: Beyond traditional uses in concrete and masonry, waterproofing admixtures are now being applied in new sectors such as green buildings, industrial flooring, and underground constructions. The versatility of these admixtures allows for their integration into various construction materials and systems. This expansion is driven by the increasing demand for durable, water-resistant solutions across different industries. As applications diversify, manufacturers are innovating to meet specific technical requirements, thereby broadening the market scope and increasing overall demand.
• Emphasis on Regulatory Compliance and Quality Standards: Stringent building codes and quality standards are influencing market dynamics. Manufacturers are focusing on producing admixtures that comply with international standards such as ASTM, ISO, and local regulations. This emphasis ensures safety, performance, and reliability, which are critical for gaining customer trust and market acceptance. Compliance also facilitates entry into new markets with strict regulatory environments. Consequently, quality assurance and certification processes are becoming integral to product development, fostering a competitive edge and encouraging continuous improvement.

These emerging trends are collectively transforming the waterproofing admixture market by promoting sustainability, technological innovation, expanded application scopes, and regulatory adherence. These developments are driving market growth, enhancing product performance, and opening new opportunities across various construction sectors, ultimately reshaping the industry landscape for a more resilient and sustainable future.

Recent Developments in the Waterproofing Admixture Market

The waterproofing admixture market is experiencing rapid growth driven by increasing infrastructure projects, urbanization, and the need for durable construction materials. Innovations in admixture formulations and rising demand for sustainable solutions are shaping the industry landscape. Governments and private sectors are investing heavily in infrastructure, boosting market opportunities. Technological advancements are enhancing product performance, while environmental regulations are encouraging eco-friendly options. These developments collectively are transforming the waterproofing admixture market, making it more competitive and innovative.

• Growing Infrastructure Investments: The surge in infrastructure projects worldwide, including roads, bridges, and buildings, is significantly boosting demand for waterproofing admixtures. Governments and private developers seek durable, cost-effective solutions to protect structures from water damage, leading to increased adoption of advanced admixtures. This trend is expected to continue as urbanization accelerates, creating substantial growth opportunities for manufacturers and suppliers in the waterproofing admixture market.
• Innovation in Eco-Friendly Formulations: The market is witnessing a shift towards environmentally sustainable waterproofing admixtures. Manufacturers are developing eco-friendly products with reduced volatile organic compounds (VOCs) and enhanced biodegradability. These innovations meet stringent environmental regulations and consumer preferences for green construction materials. The adoption of such formulations is expanding market reach, especially in regions with strict environmental standards, and is expected to drive growth in the coming years.
• Technological Advancements in Product Performance: Recent developments include the integration of nanotechnology and advanced chemical formulations to improve waterproofing efficacy. These innovations enhance adhesion, flexibility, and durability of concrete structures, reducing maintenance costs. Improved performance characteristics are attracting more construction projects seeking long-lasting solutions. As technology continues to evolve, the market will benefit from higher-quality products that meet complex construction demands, fostering competitive advantages for industry players.
• Rising Adoption in Residential and Commercial Sectors: Increasing urbanization and construction activities are driving waterproofing admixture use in residential and commercial buildings. Consumers and developers prioritize water-resistant structures to prevent damage and extend building lifespan. The growing awareness of waterproofing benefits and regulatory compliance is further fueling adoption. This trend is expected to sustain market growth, with a focus on innovative, easy-to-apply admixtures that cater to diverse construction needs.
• Impact of Regulatory Standards and Certifications: Stringent building codes and environmental regulations are influencing product development and market dynamics. Certifications for eco-friendly and high-performance admixtures are becoming essential for market entry and acceptance. Compliance ensures safety, durability, and sustainability, boosting consumer confidence. These regulatory frameworks are encouraging manufacturers to innovate and improve product quality, ultimately shaping a more responsible and competitive waterproofing admixture market landscape.

These developments are significantly impacting the waterproofing admixture market by fostering innovation, sustainability, and technological progress. Increased infrastructure investments and regulatory standards are driving demand for high-performance, eco-friendly products. The market is becoming more competitive, with players focusing on advanced formulations and sustainable solutions. Overall, these trends are propelling the industry toward a more resilient, environmentally conscious, and technologically sophisticated future.

Strategic Growth Opportunities in the Waterproofing Admixture Market

The waterproofing admixture market is experiencing rapid growth driven by increasing infrastructure development, urbanization, and the need for durable construction materials. Innovations in admixture formulations and rising demand for sustainable, cost-effective solutions are further propelling market expansion. Key applications across residential, commercial, and industrial sectors present significant opportunities for manufacturers to innovate and capture market share. Strategic investments and technological advancements are essential to meet evolving construction standards and environmental regulations, ensuring long-term growth and competitiveness in this dynamic industry.

• Expanding Infrastructure Projects Drive Demand for Waterproofing Admixtures: Growing infrastructure development worldwide, including roads, bridges, and tunnels, necessitates durable waterproofing solutions. Governments and private sectors are investing heavily in urban infrastructure, creating a substantial market for waterproofing admixtures that enhance the longevity and resilience of concrete structures. This trend is particularly prominent in emerging economies, where rapid urbanization demands cost-effective, high-performance materials to meet construction standards and reduce maintenance costs over time.
• Increasing Adoption in Residential and Commercial Construction for Enhanced Durability: The rising focus on sustainable and resilient buildings is boosting the use of waterproofing admixtures in residential and commercial projects. Developers seek solutions that prevent water ingress, mold, and structural damage, thereby extending building lifespan. Innovations in admixture formulations that improve workability, adhesion, and environmental resistance are attracting more contractors and builders, fueling market growth across developed and developing regions.
• Technological Advancements in Admixture Formulations Offer Competitive Edge: Continuous R&D efforts are leading to the development of advanced waterproofing admixtures with superior properties such as self-healing, eco-friendliness, and enhanced compatibility with various cement types. These innovations enable manufacturers to differentiate their products, meet stringent environmental regulations, and cater to specific project requirements. Adoption of nanotechnology and other cutting-edge techniques is expected to further revolutionize the market, opening new avenues for growth.
• Rising Focus on Sustainable and Eco-Friendly Construction Materials: Environmental concerns and regulations are pushing the construction industry toward greener solutions. Waterproofing admixture manufacturers are developing formulations with reduced VOC emissions, recycled materials, and lower carbon footprints. These eco-friendly products appeal to environmentally conscious consumers and builders, expanding market opportunities. Governments are also incentivizing sustainable construction practices, which further accelerates the adoption of green waterproofing solutions in various construction projects.
• Growing Demand from Industrial and Tunneling Applications for Specialized Solutions: Industrial facilities, wastewater treatment plants, and tunneling projects require highly specialized waterproofing admixtures capable of withstanding aggressive chemicals and extreme conditions. The increasing number of such projects worldwide is driving demand for tailored admixture solutions that offer high chemical resistance, flexibility, and long-term durability. This niche segment presents significant growth potential for manufacturers capable of delivering innovative, high-performance products suited to challenging environments.

These growth opportunities collectively enhance the waterproofing admixture market's potential, driven by infrastructure expansion, technological innovation, sustainability trends, and specialized application needs. Companies that strategically leverage these opportunities can achieve competitive advantages, meet evolving customer demands, and sustain long-term growth in this expanding industry.

Waterproofing Admixture Market Drivers and Challenges

The waterproofing admixture market is influenced by a variety of technological, economic, and regulatory factors that shape its growth trajectory. Advances in construction technology and increasing urbanization drive demand for durable, water-resistant materials. Economic factors such as infrastructure development and real estate growth further propel the market, while regulatory standards for building safety and environmental sustainability influence product innovation and adoption. However, the market also faces challenges including fluctuating raw material prices, stringent regulations, and environmental concerns. Understanding these drivers and challenges is essential for stakeholders to navigate the evolving landscape and capitalize on emerging opportunities.

The factors responsible for driving the waterproofing admixture market include:

• Technological Innovation: The development of advanced waterproofing admixtures, such as polymer-modified and crystalline-based products, enhances performance and durability. These innovations meet the increasing demand for long-lasting, water-resistant structures in construction projects worldwide. As construction standards evolve, manufacturers invest heavily in R&D to create more effective solutions, which in turn accelerates market growth. The integration of eco-friendly and sustainable materials also aligns with global environmental goals, further boosting adoption. This continuous technological progress ensures that the market remains competitive and responsive to customer needs.
• Urbanization and Infrastructure Development: Rapid urbanization, especially in emerging economies, fuels the demand for waterproofing solutions in residential, commercial, and industrial projects. Governments and private sectors are investing heavily in infrastructure such as roads, bridges, tunnels, and water management systems, all requiring reliable waterproofing admixtures. The increasing focus on sustainable and resilient infrastructure to withstand climate change impacts also contributes to market expansion. As urban populations grow, the need for durable, water-resistant structures becomes critical, making waterproofing admixtures an essential component in modern construction.
• Regulatory Standards and Building Codes: Stringent regulations related to building safety, environmental impact, and sustainability are driving the adoption of waterproofing admixtures. Governments worldwide are implementing standards that require the use of high-performance, eco-friendly materials to ensure structural integrity and reduce environmental footprint. Compliance with these regulations compels construction companies to incorporate advanced waterproofing solutions, thereby expanding the market. Additionally, certifications and quality standards influence product development, encouraging manufacturers to innovate and meet evolving regulatory demands.
• Economic Growth and Construction Spending: Increasing economic stability and growth in various regions lead to higher construction spending, which directly benefits the waterproofing admixture market. Rising disposable incomes and urban development projects stimulate demand for high-quality, durable construction materials. The expansion of commercial, residential, and industrial sectors necessitates extensive waterproofing solutions to ensure longevity and safety. As construction activities accelerate globally, especially in developing countries, the market experiences significant growth opportunities driven by increased infrastructure investments.
• Environmental Sustainability and Green Building Initiatives: Growing awareness of environmental issues and the push for green building practices influence the waterproofing admixture market. Eco-friendly admixtures that reduce VOC emissions and utilize sustainable raw materials are gaining popularity. Governments and industry standards increasingly favor sustainable construction practices, encouraging the adoption of environmentally responsible waterproofing solutions. This shift not only aligns with global sustainability goals but also opens new avenues for product innovation, catering to environmentally conscious consumers and developers.

The challenges facing the waterproofing admixture market include:

• Fluctuating Raw Material Prices: The cost of raw materials such as cement, polymers, and chemicals significantly impacts the profitability and pricing strategies of waterproofing admixture manufacturers. Volatility in raw material prices, driven by supply chain disruptions, geopolitical tensions, and fluctuating oil prices, creates uncertainty in production costs. This unpredictability can hinder long-term planning and lead to increased product prices, potentially reducing demand. Companies must develop strategies to manage costs effectively while maintaining product quality to stay competitive in a dynamic market environment.
• Stringent Regulatory and Environmental Norms: While regulations promote innovation, they also pose challenges for market players. Compliance with evolving standards related to environmental impact, toxicity, and safety requires continuous product reformulation and testing, increasing R&D costs. Non-compliance can result in legal penalties and loss of market access. Navigating complex regulatory landscapes across different regions demands significant resources and expertise, which can be particularly challenging for small and medium-sized enterprises. Balancing regulatory compliance with cost-effectiveness remains a critical challenge for sustained market growth.
• Environmental Concerns and Sustainability Pressures: Despite the push for eco-friendly products, the environmental impact of certain waterproofing admixtures, especially those based on non-biodegradable chemicals, remains a concern. The disposal and long-term environmental effects of these materials can lead to regulatory restrictions and consumer resistance. Manufacturers face the challenge of developing sustainable alternatives that meet performance standards without compromising environmental integrity. Addressing these concerns requires significant innovation and investment, which can slow down market expansion and increase product development timelines.

The waterproofing admixture market is driven by technological advancements, urbanization, regulatory standards, economic growth, and sustainability initiatives. However, it faces challenges such as raw material price volatility, regulatory complexities, and environmental concerns. These factors collectively influence market dynamics, requiring stakeholders to innovate, adapt, and strategize effectively. The overall impact is a market that is poised for growth but must navigate significant hurdles to realize its full potential, emphasizing the importance of sustainable practices and regulatory compliance for long-term success.

List of Waterproofing Admixture Market Companies

Companies in the market compete on the basis of product quality offered. Major players in this market focus on expanding their manufacturing facilities, R&D investments, infrastructural development, and leverage integration opportunities across the value chain. Through these strategies waterproofing admixture market companies cater increasing demand, ensure competitive effectiveness, develop innovative products & technologies, reduce production costs, and expand their customer base. Some of the waterproofing admixture market companies profiled in this report include-

• BASF SE
• SIKA AG
• GCP Applied Technologies
• Wacker Chemie AG
• DOW CORNING
• RPM International Inc.
• Pidilite Industries
• Fosroc International Ltd.
• Evonik Industries AG
• Mapei S.P.A.

Waterproofing Admixture Market by Segment

The study includes a forecast for the global waterproofing admixture market by type, end use, and region.

Waterproofing Admixture Market by Type [Value ($B) from 2019 to 2035]:

• Crystalline Waterproofing Admixture
• Pore Blocking Waterproofing Admixture
• Others

Waterproofing Admixture Market by End Use [Value ($B) from 2019 to 2035]:

• Residential
• Commercial
• Infrastructure

Waterproofing Admixture Market by Region [Value ($B) from 2019 to 2035]:

• North America
• Europe
• Asia Pacific
• The Rest of the World

Country Wise Outlook for the Waterproofing Admixture Market

The waterproofing admixture market has experienced significant growth driven by increasing infrastructure development, urbanization, and the need for durable construction materials worldwide. Innovations in chemical formulations and sustainable solutions are shaping the market landscape, with key players focusing on eco-friendly products and advanced application techniques. Governments and private sectors are investing heavily in infrastructure projects, boosting demand for waterproofing solutions across various sectors such as residential, commercial, and industrial. The market's evolution reflects a shift towards more efficient, long-lasting, and environmentally conscious products, with regional dynamics playing a crucial role in shaping future trends.

• United States: The U.S. market has seen a surge in demand for high-performance waterproofing admixtures, driven by stringent building codes and a focus on sustainable construction. Innovations include the development of eco-friendly, low-VOC products and advanced polymer-based solutions. The commercial and residential sectors are adopting these admixtures for enhanced durability and water resistance, especially in flood-prone areas. Major players are investing in R&D to improve product efficacy and environmental compliance, with increased adoption of spray-applied and integral waterproofing systems. The market is also influenced by government initiatives promoting green building practices.
• China: China remains the largest market for waterproofing admixtures, fueled by rapid urbanization and infrastructure expansion. The country is witnessing a shift towards more advanced chemical formulations that offer better adhesion, flexibility, and environmental safety. Government policies supporting sustainable construction and the Belt and Road Initiative are further boosting demand. Local manufacturers are expanding their product portfolios to include innovative, cost-effective solutions suitable for large-scale projects. The market is also seeing increased adoption of waterproofing admixtures in tunnel construction, high-rise buildings, and transportation infrastructure, with a focus on reducing environmental impact.
• Germany: Germany's waterproofing admixture market is characterized by a strong emphasis on eco-friendly and energy-efficient products. The country's stringent environmental regulations and focus on sustainable building practices have led to the development of biodegradable and low-emission admixtures. The construction sector is increasingly adopting advanced polymer and crystalline waterproofing solutions for commercial and industrial projects. Germany also leads in integrating smart waterproofing systems that monitor moisture levels and provide real-time data. The market benefits from technological innovation, high-quality standards, and a growing trend toward renovation projects that require durable, long-lasting waterproofing solutions.
• India: The Indian waterproofing admixture market is expanding rapidly due to urbanization, infrastructure development, and government initiatives like Smart Cities and AMRUT. The demand for affordable, durable, and easy-to-apply waterproofing solutions is rising across residential, commercial, and industrial sectors. Local manufacturers are focusing on developing cost-effective, environmentally friendly products to meet the needs of a price-sensitive market. The adoption of innovative admixtures such as crystalline and polymer-based solutions is increasing, especially in large-scale projects like metro rail, bridges, and high-rise buildings. The market is also driven by a rising awareness of the importance of waterproofing for building longevity.
• Japan: Japan's market is characterized by advanced technological integration and a focus on disaster resilience, especially in earthquake-prone regions. The country is adopting high-performance waterproofing admixtures that offer superior water resistance and flexibility. Eco-friendly and energy-efficient products are gaining popularity, aligned with Japan's environmental policies. The construction industry is increasingly utilizing crystalline and membrane-based waterproofing solutions for infrastructure and residential projects. Japan also emphasizes innovative, long-lasting products that can withstand harsh environmental conditions. The market benefits from a mature industrial base, strict quality standards, and a focus on sustainable, resilient construction practices.

Features of the Global Waterproofing Admixture Market

• Market Size Estimates: waterproofing admixture market size estimation in terms of value ($B).
• Trend and Forecast Analysis: Market trends (2019 to 2025) and forecast (2026 to 2035) by various segments and regions.
• Segmentation Analysis: waterproofing admixture market size by type, end use, and region in terms of value ($B).
• Regional Analysis: waterproofing admixture market breakdown by North America, Europe, Asia Pacific, and Rest of the World.
• Growth Opportunities: Analysis of growth opportunities in different type, end use, and regions for the waterproofing admixture market.
• Strategic Analysis: This includes M&A, new product development, and competitive landscape of the waterproofing admixture market.

Analysis of competitive intensity of the industry based on Porter's Five Forces model.

If you are looking to expand your business in this or adjacent markets, then contact us. We have done hundreds of strategic consulting projects in market entry, opportunity screening, due diligence, supply chain analysis, M & A, and more.

This report answers following 11 key questions:

• Q.1. What are some of the most promising, high-growth opportunities for the waterproofing admixture market by type (crystalline waterproofing admixture, pore blocking waterproofing admixture, and others), end use (residential, commercial, and infrastructure), and region (North America, Europe, Asia Pacific, and the Rest of the World)?
• Q.2. Which segments will grow at a faster pace and why?
• Q.3. Which region will grow at a faster pace and why?
• Q.4. What are the key factors affecting market dynamics? What are the key challenges and business risks in this market?
• Q.5. What are the business risks and competitive threats in this market?
• Q.6. What are the emerging trends in this market and the reasons behind them?
• Q.7. What are some of the changing demands of customers in the market?
• Q.8. What are the new developments in the market? Which companies are leading these developments?
• Q.9. Who are the major players in this market? What strategic initiatives are key players pursuing for business growth?
• Q.10. What are some of the competing products in this market and how big of a threat do they pose for loss of market share by material or product substitution?
• Q.11. What M&A activity has occurred in the last 5 years and what has its impact been on the industry?

Table of Contents

1. Executive Summary

2. Market Overview

• 2.1 Background and Classifications
• 2.2 Supply Chain

3. Market Trends & Forecast Analysis

• 3.1 Macroeconomic Trends and Forecasts
• 3.2 Industry Drivers and Challenges
• 3.3 PESTLE Analysis
• 3.4 Patent Analysis
• 3.5 Regulatory Environment

4. Global Waterproofing Admixture Market by Type

• 4.1 Overview
• 4.2 Attractiveness Analysis by Type
• 4.3 Crystalline Waterproofing Admixture : Trends and Forecast (2019 to 2035)
• 4.4 Pore Blocking Waterproofing Admixture : Trends and Forecast (2019 to 2035)
• 4.5 Others : Trends and Forecast (2019 to 2035)

5. Global Waterproofing Admixture Market by End Use

• 5.1 Overview
• 5.2 Attractiveness Analysis by End Use
• 5.3 Residential : Trends and Forecast (2019 to 2035)
• 5.4 Commercial : Trends and Forecast (2019 to 2035)
• 5.5 Infrastructure : Trends and Forecast (2019 to 2035)

6. Regional Analysis

• 6.1 Overview
• 6.2 Global Waterproofing Admixture Market by Region

7. North American Waterproofing Admixture Market

• 7.1 Overview
• 7.2 North American Waterproofing Admixture Market by Type
• 7.3 North American Waterproofing Admixture Market by End Use
• 7.4 The United States Waterproofing Admixture Market
• 7.5 Canadian Waterproofing Admixture Market
• 7.6 Mexican Waterproofing Admixture Market

8. European Waterproofing Admixture Market

• 8.1 Overview
• 8.2 European Waterproofing Admixture Market by Type
• 8.3 European Waterproofing Admixture Market by End Use
• 8.4 German Waterproofing Admixture Market
• 8.5 French Waterproofing Admixture Market
• 8.6 Italian Waterproofing Admixture Market
• 8.7 Spanish Waterproofing Admixture Market
• 8.8 The United Kingdom Waterproofing Admixture Market

9. APAC Waterproofing Admixture Market

• 9.1 Overview
• 9.2 APAC Waterproofing Admixture Market by Type
• 9.3 APAC Waterproofing Admixture Market by End Use
• 9.4 Chinese Waterproofing Admixture Market
• 9.5 Indian Waterproofing Admixture Market
• 9.6 Japanese Waterproofing Admixture Market
• 9.7 South Korean Waterproofing Admixture Market
• 9.8 Indonesian Waterproofing Admixture Market

10. ROW Waterproofing Admixture Market

• 10.1 Overview
• 10.2 ROW Waterproofing Admixture Market by Type
• 10.3 ROW Waterproofing Admixture Market by End Use
• 10.4 Middle Eastern Waterproofing Admixture Market
• 10.5 South American Waterproofing Admixture Market
• 10.6 African Waterproofing Admixture Market

11. Competitor Analysis

• 11.1 Product Portfolio Analysis
• 11.2 Operational Integration
• 11.3 Porter's Five Forces Analysis
  • Competitive Rivalry
  • Bargaining Power of Buyers
  • Bargaining Power of Suppliers
  • Threat of Substitutes
  • Threat of New Entrants
• 11.4 Market Share Analysis

12. Opportunities & Strategic Analysis

• 12.1 Value Chain Analysis
• 12.2 Growth Opportunity Analysis
  • 12.2.1 Growth Opportunity by Type
  • 12.2.2 Growth Opportunity by End Use
  • 12.2.3 Growth Opportunity by Region
• 12.3 Emerging Trends in the Global Waterproofing Admixture Market
• 12.4 Strategic Analysis
  • 12.4.1 New Product Development
  • 12.4.2 Certification and Licensing
  • 12.4.3 Mergers, Acquisitions, Agreements, Collaborations, and Joint Ventures

13. Company Profiles of the Leading Players Across the Value Chain

• 13.1 Competitive Analysis Overview
• 13.2 BASF SE
  • Company Overview
  • Waterproofing Admixture Market Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.3 SIKA AG
  • Company Overview
  • Waterproofing Admixture Market Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.4 GCP Applied Technologies
  • Company Overview
  • Waterproofing Admixture Market Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.5 Wacker Chemie AG
  • Company Overview
  • Waterproofing Admixture Market Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.6 DOW CORNING
  • Company Overview
  • Waterproofing Admixture Market Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.7 RPM International Inc.
  • Company Overview
  • Waterproofing Admixture Market Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.8 Pidilite Industries
  • Company Overview
  • Waterproofing Admixture Market Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.9 Fosroc International Ltd.
  • Company Overview
  • Waterproofing Admixture Market Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.10 Evonik Industries AG
  • Company Overview
  • Waterproofing Admixture Market Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.11 Mapei S.P.A.
  • Company Overview
  • Waterproofing Admixture Market Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing

14. Appendix

• 14.1 List of Figures
• 14.2 List of Tables
• 14.3 Research Methodology
• 14.4 Disclaimer
• 14.5 Copyright
• 14.6 Abbreviations and Technical Units
• 14.7 About Us
• 14.8 Contact Us