항공기용 PSU 시장 보고서 : 동향, 예측 및 경쟁 분석(-2035년)

Aircraft PSU Market

The future of the global aircraft PSU market looks promising with opportunities in the narrow-body aircraft, wide-body aircraft, and regional aircraft markets. The global aircraft PSU market is expected to reach an estimated $362 million by 2035 with a CAGR of 3.3% from 2026 to 2035. The major drivers for this market are the increasing demand for enhanced passenger service units, the rising aircraft deliveries boosting PSU installations, and the growing focus on cabin comfort technologies.

• Lucintel forecasts that, within the end use category, oem is expected to witness higher growth over the forecast period due to the increasing aircraft production and original equipment installations.
• Within the aircraft type category, narrow-body aircraft is expected to witness the highest growth due to the rising demand for fuel efficient short haul aircraft.
• In terms of regions, North America is expected to witness the highest growth over the forecast period due to the strong aerospace manufacturing capabilities and defense spending.

Emerging Trends in Aircraft PSU Market

The aircraft PSU market is experiencing rapid evolution driven by technological advancements, increasing demand for fuel efficiency, and the integration of sustainable practices. As the aviation industry seeks to optimize performance and reduce environmental impact, new trends are emerging that are reshaping the landscape of aircraft power systems. These developments are not only enhancing operational efficiency but also paving the way for innovative designs and smarter solutions. Understanding these key trends is essential for stakeholders aiming to stay competitive and leverage new opportunities in this dynamic market environment.

• Adoption of Lightweight Materials: The use of advanced lightweight materials such as composites and aluminum alloys is increasing in PSU manufacturing. This trend aims to reduce the overall weight of aircraft, thereby improving fuel efficiency and operational range. Lighter power supplies contribute to lower fuel consumption and emissions, aligning with the industry's sustainability goals. Additionally, lightweight materials enhance aircraft performance and payload capacity, making them highly desirable for commercial and military applications. This shift is driven by technological innovations and the need for more efficient, eco-friendly aircraft designs.
• Integration of Smart and Digital Technologies: The incorporation of IoT, sensors, and digital monitoring systems into aircraft PSUs is transforming maintenance and operational efficiency. Smart PSUs enable real-time data collection, predictive maintenance, and remote diagnostics, reducing downtime and operational costs. This trend enhances reliability and safety, as potential issues can be identified and addressed proactively. The integration of digital technologies also facilitates better energy management and system optimization, which are critical for modern aircraft operating in increasingly complex environments. This shift is driven by advancements in digital electronics and the push for Industry 4.0 adoption.
• Focus on Fuel Efficiency and Sustainability: Increasing regulatory pressures and environmental concerns are prompting the development of more energy-efficient PSUs. Innovations include the use of high-efficiency power conversion components and energy recovery systems. These advancements help reduce fuel consumption and greenhouse gas emissions, supporting airlines sustainability commitments. Moreover, the adoption of alternative energy sources, such as hybrid and electric power systems, is gaining traction. This trend is crucial for meeting future environmental standards and reducing the carbon footprint of the aviation industry, making sustainable power solutions a key market driver.
• Rise of Electric and Hybrid Aircraft Power Systems: The shift towards electric and hybrid propulsion systems is significantly impacting PSU designs. These systems require high-capacity, reliable, and efficient power supplies capable of supporting electric motors and energy storage units. The development of specialized PSUs for electric aircraft is opening new market segments, especially in regional and small aircraft markets. This trend supports the industry's move towards zero-emission aircraft and aligns with global efforts to combat climate change. The growth of electric and hybrid aircraft is expected to accelerate as technology matures and regulatory frameworks evolve.
• Expansion of Aftermarket and Maintenance Services: As aircraft fleets grow and age, the demand for aftermarket PSUs and maintenance services is increasing. This trend is driven by the need for reliable, long-lasting power supplies and the high costs associated with aircraft downtime. Companies are investing in advanced diagnostics, repair, and upgrade services to extend the lifespan of PSUs and ensure optimal performance. The aftermarket segment offers significant revenue opportunities, especially with the rise of digital monitoring systems that facilitate predictive maintenance. This trend underscores the importance of service excellence and innovation in maintaining market competitiveness.

These emerging trends are collectively reshaping the aircraft PSU market by emphasizing sustainability, technological integration, and operational efficiency. The shift towards lightweight, smart, and energy-efficient power supplies is enabling aircraft to become more environmentally friendly and cost-effective. The rise of electric and hybrid systems signifies a move towards zero-emission aviation, while enhanced aftermarket services ensure long-term reliability and customer satisfaction. Overall, these developments are fostering innovation, reducing environmental impact, and creating new market opportunities, positioning the aircraft PSU market for sustained growth and transformation in the coming years.

Recent Developments in the Aircraft PSU Market

The aircraft PSU market is experiencing rapid growth driven by technological advancements, increasing demand for fuel efficiency, and expanding global air travel. Innovations in power supply units (PSUs) are enhancing aircraft performance, safety, and reliability. Market players are investing heavily in R&D to develop lightweight, energy-efficient solutions. The rise of electric and hybrid aircraft further fuels this expansion. These developments are transforming the industry landscape, creating new opportunities for manufacturers and service providers, and shaping the future of aviation power systems.

• Technological Innovations in PSU Design: Advancements in lightweight, high-efficiency power supply units are improving aircraft performance. These innovations reduce weight, enhance energy management, and increase reliability, leading to better fuel efficiency and lower operational costs. The integration of smart monitoring systems allows real-time diagnostics, minimizing downtime. As aircraft become more sophisticated, demand for cutting-edge PSUs grows, opening new markets for manufacturers and boosting overall industry competitiveness.
• Growing Demand for Fuel-Efficient Aircraft: Rising fuel costs and environmental concerns are pushing airlines to adopt more fuel-efficient aircraft equipped with advanced PSUs. These units optimize power distribution, reduce energy wastage, and support hybrid-electric propulsion systems. The shift towards sustainable aviation fuels and electric aircraft further accelerates this trend. This demand is prompting manufacturers to innovate, resulting in more efficient, lightweight, and environmentally friendly power solutions that meet stringent regulatory standards.
• Expansion of Electric and Hybrid Aircraft: The development of electric and hybrid aircraft is creating a significant market for specialized PSUs. These aircraft require high-capacity, reliable power sources capable of supporting electric propulsion systems. The integration of advanced PSUs enhances flight range, safety, and operational efficiency. As governments and industry stakeholders push for greener aviation, the adoption of electric and hybrid aircraft is expected to surge, driving demand for innovative power supply solutions and creating new revenue streams.
• Increasing Focus on Safety and Reliability: Safety regulations and the need for operational dependability are driving innovations in PSU technology. Enhanced fault detection, redundancy, and fail-safe mechanisms are being incorporated to prevent system failures. These improvements ensure continuous power supply during critical phases of flight, reducing risks and increasing passenger confidence. Manufacturers are investing in robust testing and certification processes, which bolster market trust and expand opportunities in both commercial and military aviation sectors.
• Rising Investment in R&D and Strategic Collaborations: Major industry players are increasing R&D investments to develop next-generation PSUs with higher efficiency, lower weight, and better integration capabilities. Strategic collaborations between aircraft manufacturers, electronics firms, and technology providers are fostering innovation. These partnerships accelerate product development, reduce time-to-market, and enable customization for specific aircraft models. The focus on R&D and collaborations is positioning the market for rapid growth, technological leadership, and the ability to meet evolving industry demands.

The overall impact of these developments is a more efficient, reliable, and sustainable aircraft PSU market. Innovations are enabling aircraft to operate more economically and safely, while expanding the scope for electric and hybrid propulsion. Increased R&D and strategic partnerships are fostering a competitive environment that drives continuous improvement. These trends collectively are shaping a resilient, forward-looking market poised for significant growth and technological leadership.

Strategic Growth Opportunities in the Aircraft PSU Market

The aircraft PSU market is experiencing rapid expansion driven by increasing air travel demand, technological advancements, and the need for reliable power systems in modern aircraft. As airlines seek more efficient and lightweight power solutions, manufacturers are innovating to meet stringent safety and performance standards. The market presents significant opportunities across various aircraft types, including commercial, military, and private jets, with a focus on enhancing operational efficiency, safety, and passenger comfort through advanced power supply units.

• Increasing Adoption of Lightweight and Efficient Power Supplies: The demand for lightweight, energy-efficient power supply units (PSUs) in aircraft is rising to reduce fuel consumption and improve overall aircraft performance. Innovations in materials and design enable manufacturers to develop compact, high-capacity PSUs that meet strict weight and safety standards. This trend is particularly prominent in commercial and private aircraft, where fuel efficiency directly impacts profitability and environmental compliance. The segment includes sub-segments like high-density power modules and integrated power systems.
• Growing Demand for Advanced Power Management Systems in Military Aircraft: Military aircraft require robust, reliable, and adaptable power solutions to support complex avionics, weapon systems, and communication equipment. The increasing modernization of defense fleets drives the need for advanced power management units capable of handling high loads and ensuring operational continuity under extreme conditions. Innovations such as smart power distribution and fault-tolerant systems are gaining traction, offering enhanced safety and efficiency. This segment includes sub-segments like tactical power supplies and integrated power management units.
• Expansion of The Commercial Aircraft Sector with Next-Generation Power Solutions: The surge in commercial aircraft orders, especially for wide-body and narrow-body jets, fuels the demand for next-generation PSUs that support new avionics, entertainment systems, and passenger amenities. These power units are designed to be more reliable, energy-efficient, and easier to maintain, aligning with airline operational goals. The development of hybrid and electric propulsion systems also opens new avenues for PSU applications, including auxiliary power units (APUs) and main power systems in eco-friendly aircraft.
• Increasing Focus on Safety and Redundancy in Power Supply Design: Ensuring safety and operational continuity is critical in aircraft power systems. The market is witnessing a shift toward designing redundant, fail-safe PSUs that can operate seamlessly during component failures or power surges. This focus enhances aircraft safety, reduces maintenance costs, and complies with stringent aviation regulations. Innovations include modular power supplies, hot-swappable units, and advanced monitoring systems that enable real-time diagnostics and predictive maintenance, thereby minimizing downtime and enhancing reliability.
• Rising Integration of Digital and Smart Technologies in Power Systems: The integration of digital technologies, such as IoT and AI, into aircraft PSUs is transforming power management. Smart power systems enable real-time monitoring, predictive maintenance, and optimized power distribution, leading to increased efficiency and reduced operational costs. These advancements facilitate better fault detection and system diagnostics, improving safety and reliability. The segment includes sub-segments like digital power controllers, remote monitoring solutions, and AI-enabled power management units, supporting the evolution toward more intelligent aircraft power systems.

The overall growth opportunities in the aircraft PSU market are poised to significantly enhance aircraft performance, safety, and efficiency. Innovations across lightweight materials, advanced power management, and digital integration will drive market expansion, catering to the evolving needs of commercial, military, and private aviation sectors. These developments will enable manufacturers to meet stringent regulatory standards while delivering reliable, cost-effective power solutions, ultimately transforming the future landscape of aircraft power systems.

Aircraft PSU Market Drivers and Challenges

The aircraft PSU market is influenced by a variety of technological, economic, and regulatory factors that shape its growth and development. Rapid advancements in aerospace technology, increasing demand for fuel-efficient and reliable power systems, and stringent safety standards are key drivers. Economic factors such as rising air travel and airline fleet expansions further propel market growth. Conversely, challenges like high manufacturing costs, regulatory compliance complexities, and technological obsolescence pose significant hurdles. Understanding these drivers and challenges is essential for stakeholders to navigate the evolving landscape, capitalize on opportunities, and mitigate risks effectively in this competitive industry.

The factors responsible for driving the aircraft PSU market include:

• Technological Innovation: The continuous development of advanced power supply units enhances aircraft safety, efficiency, and reliability. Innovations such as lightweight materials, improved power management systems, and integration with digital avionics are critical. These advancements meet increasing airline demands for fuel efficiency and reduced emissions, thereby expanding market opportunities. Moreover, technological progress enables the integration of new systems like electric and hybrid propulsion, further boosting market growth. As aircraft become more sophisticated, the need for reliable, high-performance power supply units becomes paramount, driving manufacturers to innovate and improve product offerings.
• Rising Air Travel and Fleet Expansion: The global increase in air travel, driven by economic growth and rising middle-class populations, significantly boosts demand for aircraft and related components. Airlines are expanding their fleets to meet passenger demand, which directly increases the need for reliable power supply units. This growth is particularly prominent in emerging markets, where aviation infrastructure is rapidly developing. The expansion of fleet size and the introduction of new aircraft models necessitate advanced PSU systems capable of supporting modern avionics and electrical systems, thus fueling market growth.
• Regulatory and Safety Standards: Stringent safety regulations and certification requirements imposed by aviation authorities such as FAA and EASA compel manufacturers to develop high-quality, compliant power supply units. These standards ensure aircraft safety and operational reliability but also increase development costs and time-to-market. Compliance with evolving regulations encourages innovation in PSU design, materials, and testing procedures. This regulatory environment, while challenging, ultimately drives the market toward higher standards of safety and performance, fostering trust among airlines and passengers.
• Increasing Focus on Fuel Efficiency and Sustainability: The aviation industry's push toward reducing carbon emissions and improving fuel efficiency directly impacts the demand for advanced power systems. Efficient PSUs contribute to overall aircraft energy management, supporting electric and hybrid systems that reduce fuel consumption. Governments and industry bodies are incentivizing sustainable practices, prompting manufacturers to develop eco-friendly power solutions. This focus on sustainability not only aligns with regulatory requirements but also offers competitive advantages, encouraging investment in innovative, energy-efficient PSU technologies.
• Growing Adoption of Electric and Hybrid Aircraft: The shift toward electric and hybrid propulsion systems in aircraft design is a major driver for the PSU market. These systems require robust, efficient, and lightweight power supply units capable of supporting electric propulsion components and onboard systems. The trend is driven by technological feasibility, environmental concerns, and regulatory incentives. As electric aircraft become more prevalent, the demand for specialized PSUs increases, creating new opportunities for manufacturers to develop tailored solutions that meet the unique needs of these emerging aircraft types.

The challenges facing the aircraft PSU market include:

• High Manufacturing and Development Costs: Developing advanced power supply units involves significant investment in research, testing, and certification processes. The high costs associated with materials, precision manufacturing, and compliance with safety standards can limit profitability and market entry for smaller players. These expenses also translate into higher prices for end-users, potentially slowing adoption. Additionally, rapid technological changes require continuous innovation, further escalating costs and posing financial risks for manufacturers.
• Regulatory Compliance and Certification Complexities: Navigating the complex landscape of aviation safety standards and obtaining necessary certifications is a lengthy and costly process. Variations in regulations across different regions can delay product launches and increase development costs. Non-compliance risks include penalties, product recalls, and damage to reputation. The evolving regulatory environment demands ongoing adaptation and testing, which can hinder market agility and increase time-to-market for new PSU solutions.
• Technological Obsolescence and Compatibility Issues: Rapid technological advancements can render existing PSU designs obsolete, forcing manufacturers to invest continually in R&D. Compatibility issues may arise with new aircraft systems or upgrades, necessitating redesigns and re-certifications. This constant evolution creates uncertainty and can lead to increased costs and delays. Ensuring backward compatibility while innovating for future needs remains a significant challenge, impacting overall market stability and growth prospects.

The aircraft PSU market is shaped by technological innovation, increasing air travel, regulatory standards, sustainability initiatives, and emerging electric aircraft trends. However, high costs, regulatory hurdles, and rapid technological changes pose notable challenges. These drivers and challenges collectively influence market dynamics, requiring stakeholders to adapt strategically. While growth opportunities are substantial, success depends on balancing innovation with compliance and cost management, ensuring sustainable development in this evolving industry.

List of Aircraft PSU Market Companies

Companies in the market compete on the basis of product quality offered. Major players in this market focus on expanding their manufacturing facilities, R&D investments, infrastructural development, and leverage integration opportunities across the value chain. Through these strategies aircraft PSU market companies cater increasing demand, ensure competitive effectiveness, develop innovative products & technologies, reduce production costs, and expand their customer base. Some of the aircraft PSU market companies profiled in this report include-

• Collins Aerospace
• Safran S.A.
• Astronics Corporation
• Diehl Stiftung & Co. KG
• Luminator Aerospace

Aircraft PSU Market by Segment

The study includes a forecast for the global aircraft PSU market by aircraft type, sales channel, end use, and region.

Aircraft PSU Market by Aircraft Type [Value ($M) from 2019 to 2035]:

• Wide-Body Aircraft
• Narrow-Body Aircraft
• Regional Aircraft

Aircraft PSU Market by Sales Channel [Value ($M) from 2019 to 2035]:

• SFE
• BFE

Aircraft PSU Market by End Use [Value ($M) from 2019 to 2035]:

• OEM
• Aftermarket

Aircraft PSU Market by Region [Value ($M) from 2019 to 2035]:

• North America
• Europe
• Asia Pacific
• The Rest of the World

Country Wise Outlook for the Aircraft PSU Market

The aircraft PSU market has experienced significant growth driven by advancements in aviation technology, increasing demand for fuel-efficient and reliable power systems, and the expansion of commercial and military aircraft fleets worldwide. Innovations in lightweight materials, digital control systems, and enhanced safety features are shaping the future of this industry. The market's evolution is also influenced by regulatory standards, environmental concerns, and the integration of smart technologies. As countries invest in modernizing their aerospace sectors, understanding regional developments becomes crucial for stakeholders aiming to capitalize on emerging opportunities and address unique market challenges.

• United States: The US aircraft PSU market has seen rapid growth due to the expansion of commercial airlines and military modernization programs. Leading aerospace companies are investing in advanced, lightweight, and energy-efficient power systems, with a focus on digital integration and safety enhancements. The adoption of smart PSU solutions for predictive maintenance is increasing, driven by technological innovation and regulatory support. The US government's defense budget allocations further bolster military aircraft power system upgrades, fostering a competitive environment for domestic manufacturers and international collaborations.
• China: China's aircraft PSU market is experiencing robust growth fueled by the rapid expansion of its civil aviation sector and military modernization efforts. Domestic companies are increasingly investing in R&D to develop high-performance, reliable power units that meet international standards. The government's strategic initiatives aim to reduce reliance on foreign technology, promoting indigenous innovation. Additionally, China's focus on eco-friendly and energy-efficient systems aligns with its broader environmental policies, leading to the adoption of greener PSU solutions in new aircraft models.
• Germany: Germany remains a key player in the aircraft PSU market, driven by its strong aerospace manufacturing sector and technological expertise. The focus is on developing lightweight, durable, and highly efficient power systems for both commercial and military aircraft. German companies are also pioneering in integrating digital control and monitoring systems to enhance reliability and maintenance efficiency. Collaborations within the European Union and with global aerospace giants are facilitating innovation and expanding market reach, with a particular emphasis on sustainability and compliance with stringent safety standards.
• India: India's aircraft PSU market is witnessing significant growth due to increasing domestic aircraft production and modernization of military fleets. The government's Make in India initiative encourages local manufacturing and innovation in aerospace components, including power supply units. Indian companies are focusing on developing cost-effective, reliable, and lightweight PSUs to cater to both domestic and export markets. The rising demand for regional connectivity and the expansion of private airlines further boost the market, alongside government efforts to enhance defense capabilities.
• Japan: Japan's aircraft PSU market is characterized by technological innovation and high-quality manufacturing standards. The country's focus on advanced materials and digital control systems is driving the development of more efficient and reliable power units. Japan's aerospace industry collaborates closely with global partners to incorporate cutting-edge technologies, emphasizing safety and environmental sustainability. The market benefits from Japan's strong defense sector and its commitment to maintaining technological leadership in aerospace power systems, with ongoing investments in research and development to support future aircraft designs.

Features of the Global Aircraft PSU Market

• Market Size Estimates: aircraft PSU market size estimation in terms of value ($M).
• Trend and Forecast Analysis: Market trends (2019 to 2025) and forecast (2026 to 2035) by various segments and regions.
• Segmentation Analysis: aircraft PSU market size by aircraft type, sales channel, end use, and region in terms of value ($M).
• Regional Analysis: aircraft PSU market breakdown by North America, Europe, Asia Pacific, and Rest of the World.
• Growth Opportunities: Analysis of growth opportunities in different aircraft types, sales channels, end uses, and regions for the aircraft PSU market.
• Strategic Analysis: This includes M&A, new product development, and competitive landscape of the aircraft PSU market.

Analysis of competitive intensity of the industry based on Porter's Five Forces model.

If you are looking to expand your business in this or adjacent markets, then contact us. We have done hundreds of strategic consulting projects in market entry, opportunity screening, due diligence, supply chain analysis, M & A, and more.

This report answers following 11 key questions:

• Q.1. What are some of the most promising, high-growth opportunities for the aircraft PSU market by aircraft type (wide-body aircraft, narrow-body aircraft, and regional aircraft), sales channel (SFE and BFE), end use (OEM and aftermarket), and region (North America, Europe, Asia Pacific, and the Rest of the World)?
• Q.2. Which segments will grow at a faster pace and why?
• Q.3. Which region will grow at a faster pace and why?
• Q.4. What are the key factors affecting market dynamics? What are the key challenges and business risks in this market?
• Q.5. What are the business risks and competitive threats in this market?
• Q.6. What are the emerging trends in this market and the reasons behind them?
• Q.7. What are some of the changing demands of customers in the market?
• Q.8. What are the new developments in the market? Which companies are leading these developments?
• Q.9. Who are the major players in this market? What strategic initiatives are key players pursuing for business growth?
• Q.10. What are some of the competing products in this market and how big of a threat do they pose for loss of market share by material or product substitution?
• Q.11. What M&A activity has occurred in the last 5 years and what has its impact been on the industry?

Table of Contents

1. Executive Summary

2. Market Overview

• 2.1 Background and Classifications
• 2.2 Supply Chain

3. Market Trends & Forecast Analysis

• 3.1 Macroeconomic Trends and Forecasts
• 3.2 Industry Drivers and Challenges
• 3.3 PESTLE Analysis
• 3.4 Patent Analysis
• 3.5 Regulatory Environment

4. Global Aircraft PSU Market by Aircraft Type

• 4.1 Overview
• 4.2 Attractiveness Analysis by Aircraft Type
• 4.3 Wide-Body Aircraft : Trends and Forecast (2019 to 2035)
• 4.4 Narrow-Body Aircraft : Trends and Forecast (2019 to 2035)
• 4.5 Regional Aircraft : Trends and Forecast (2019 to 2035)

5. Global Aircraft PSU Market by Sales Channel

• 5.1 Overview
• 5.2 Attractiveness Analysis by Sales Channel
• 5.3 SFE : Trends and Forecast (2019 to 2035)
• 5.4 BFE : Trends and Forecast (2019 to 2035)

6. Global Aircraft PSU Market by End Use

• 6.1 Overview
• 6.2 Attractiveness Analysis by End Use
• 6.3 OEM : Trends and Forecast (2019 to 2035)
• 6.4 Aftermarket : Trends and Forecast (2019 to 2035)

7. Regional Analysis

• 7.1 Overview
• 7.2 Global Aircraft PSU Market by Region

8. North American Aircraft PSU Market

• 8.1 Overview
• 8.2 North American Aircraft PSU Market by Aircraft Type
• 8.3 North American Aircraft PSU Market by End Use
• 8.4 The United States Aircraft PSU Market
• 8.5 Canadian Aircraft PSU Market
• 8.6 Mexican Aircraft PSU Market

9. European Aircraft PSU Market

• 9.1 Overview
• 9.2 European Aircraft PSU Market by Aircraft Type
• 9.3 European Aircraft PSU Market by End Use
• 9.4 German Aircraft PSU Market
• 9.5 French Aircraft PSU Market
• 9.6 Italian Aircraft PSU Market
• 9.7 Spanish Aircraft PSU Market
• 9.8 The United Kingdom Aircraft PSU Market

10. APAC Aircraft PSU Market

• 10.1 Overview
• 10.2 APAC Aircraft PSU Market by Aircraft Type
• 10.3 APAC Aircraft PSU Market by End Use
• 10.4 Chinese Aircraft PSU Market
• 10.5 Indian Aircraft PSU Market
• 10.6 Japanese Aircraft PSU Market
• 10.7 South Korean Aircraft PSU Market
• 10.8 Indonesian Aircraft PSU Market

11. ROW Aircraft PSU Market

• 11.1 Overview
• 11.2 ROW Aircraft PSU Market by Aircraft Type
• 11.3 ROW Aircraft PSU Market by End Use
• 11.4 Middle Eastern Aircraft PSU Market
• 11.5 South American Aircraft PSU Market
• 11.6 African Aircraft PSU Market

12. Competitor Analysis

• 12.1 Product Portfolio Analysis
• 12.2 Operational Integration
• 12.3 Porter's Five Forces Analysis
  • Competitive Rivalry
  • Bargaining Power of Buyers
  • Bargaining Power of Suppliers
  • Threat of Substitutes
  • Threat of New Entrants
• 12.4 Market Share Analysis

13. Opportunities & Strategic Analysis

• 13.1 Value Chain Analysis
• 13.2 Growth Opportunity Analysis
  • 13.2.1 Growth Opportunity by Aircraft Type
  • 13.2.2 Growth Opportunity by Sales Channel
  • 13.2.3 Growth Opportunity by End Use
  • 13.2.4 Growth Opportunity by Region
• 13.3 Emerging Trends in the Global Aircraft PSU Market
• 13.4 Strategic Analysis
  • 13.4.1 New Product Development
  • 13.4.2 Certification and Licensing
  • 13.4.3 Mergers, Acquisitions, Agreements, Collaborations, and Joint Ventures

14. Company Profiles of the Leading Players Across the Value Chain

• 14.1 Competitive Analysis Overview
• 14.2 Collins Aerospace
  • Company Overview
  • Aircraft PSU Market Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 14.3 Safran S.A.
  • Company Overview
  • Aircraft PSU Market Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 14.4 Astronics Corporation
  • Company Overview
  • Aircraft PSU Market Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 14.5 Diehl Stiftung & Co. KG
  • Company Overview
  • Aircraft PSU Market Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 14.6 Luminator Aerospace
  • Company Overview
  • Aircraft PSU Market Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing

15. Appendix

• 15.1 List of Figures
• 15.2 List of Tables
• 15.3 Research Methodology
• 15.4 Disclaimer
• 15.5 Copyright
• 15.6 Abbreviations and Technical Units
• 15.7 About Us
• 15.8 Contact Us