저온 경화형 에폭시제 시장 보고서 : 동향, 예측 및 경쟁 분석(-2035년)

Low Temperature Curing Epoxy Agent Market

The future of the global low temperature curing epoxy agent market looks promising with opportunities in the paints and coatings, adhesives, composites, and electrical and electronics markets. The global low temperature curing epoxy agent market is expected to reach an estimated $515.3 million by 2035 from $293.1 million in 2027 with a CAGR of 5.1% from 2027 to 2035. The major drivers for this market are the increasing adoption of low-temperature curing technologies and the rising demand for high-performance coatings.

• Lucintel forecasts that, within the type category, two-component epoxy is expected to witness higher growth over the forecast period due to increased demand for two-component epoxy in advanced applications.
• Within the application category, paints and coatings is expected to witness the highest growth over the forecast period due to increasing construction and demand for protective coatings.
• In terms of regions, APAC is expected to witness the highest growth over the forecast period due to rapid industrialization and increasing construction expenditures in nations.

Emerging Trends in Low Temperature Curing Epoxy Agent Market

Moving from niche formulations to energy-saving faster-processing systems in an increasingly competitive construction, electronics, wind energy, and transportation marketplace is expected for low temperature curing epoxy agents from 2025-2027, tracking manufacturing trends of decreasing carbon emissions in production coupled with demand for composites. Expect application driven competition as suppliers provide better cured systems at lower temperatures.

• Energy Efficiency: Low temperature curing epoxy agents are used by manufacturers to decrease oven loads, and subsequent energy consumption. Cycle time energy was particularly highlighted in the European industrial sector in 2025. Fast curing epoxy systems shorten cycle times in electronic assemblies, with major suppliers developing technologies to meet this demand in 2025. Expected reduction in investment in additional oven capacity will influence production capacity planning.
• Faster Processing: The development of faster curing epoxy systems for use at temperature ranges of 60-80°C is expected in the automotive industry and other manufacturing sectors including electronics. In 2025, major epoxy system suppliers introduced new technologies to meet this demand.
• Electrification Demand: Low temperature curing epoxy agents will be required for manufacturing insulated epoxy coatings and adhesives for electric vehicle components, batteries and chargers. Epoxy coatings and adhesives have an important role to play in thermal management of electrical systems. The demand for low temperature curing epoxy agents is expected to substantially grow beyond coating and adhesive applications.
• Sustainability and Bio-content: Consumers want lower-VOC formulations. They prefer renewable and/or recycled inputs. Continental chemical policy and Scope 3 reporting have spurred specification changes for 2025. Low-temperature curing suppliers with bio-content stand a good chance of winning qualification programs; however, significant challenges with price and durability remain.
• Regional Supply Resilience: Consumers are sourcing alternative supplies of curing agents and localized production following disruptions in shipping and issues of volatility in feedstock; 2025 was the year of consumer domination of the Asia-Pacific region. Regional formulation capacity will determine lead times, inventory policies, and suppliers throughout 2030.

Sector specific adhesives with the potential for high levels of energy savings will need to show significant gains in adhesion, electrical insulation and shelf stability in order to finally gain market traction. Emphasis will initially be in the automotive sector, though there is potential for wider construction and industrial maintenance markets. Lengthy qualification will remain the norm; companies able to provide quality technical service and production on a regional scale will dominate the market. Price competition will greatly increase in the next year as low-temperature curing moves from specialty to mainstream production.

Recent Developments in the Low Temperature Curing Epoxy Agent Market

As the low temperature curing epoxy market transitions from specialist repair to qualified production use driven by the combined forces of electrification and composite maintenance, there is continued but careful activity among suppliers to build application labs and regional capacity, as well as compliant chemistry, during the forecast period of 2025 to 2027. Lucintel states that the selection criteria consider faster qualification and lower process temperatures.

• Product Launches: In January 2025, Huntsman launched an Araldite system curing at 60°C targeting composite assembly and transport applications. These products allow shorter oven cycles and an expansion of epoxy systems to applications where heat sensitive substrates previously constrained epoxy adoption.
• Capacity Expansion: In April 2025, Aditya Birla Advanced Materials announced a 50,000-tonne epoxy expansion in India. This capacity addition provides regional supply and an offset to import exposure, and improves delivery time to the electrical, wind, and infrastructure sectors for the next five years.
• Collaborative Agreements: In June 2025, Henkel announced an expanded collaborative agreement with a large European battery manufacturer for two adhesive systems. Suppliers that participate in these types of agreements will gain access to qualification and production which will translate to returning business.
• Automotive Qualification: In September 2025, a major electric-vehicle program approved two-component epoxy curing below 80°C for battery pack assembly. Automotive approval may define epoxy technologies that cure below 80°C and transition them from a qualification need to required specifications for volume battery pack assembly.
• Regulatory Reformulation: In February 2026, the European Commission implemented 1,000 plus restrictions on substances covered under the chemicals road map and increased the focus on epoxy curing agents and rest of formulation. Suppliers who provide epoxy formulations and curing agents that are safer and lower emissions coupled with documented emissions and toxicology, should see a shift in demand.

In energy-sensitive manufacturing, low temperature curing is shifting from a formulation advantage to a qualification requirement. Manufacturers able to combine latent reactivity with low-viscosity processes will lead market adoption. Automotive electrification and wind repair continue to be demand anchors, while regulatory pressure increases reformulation costs. The first movers will successfully demonstrate their products' shelf stability and bond reliability while achieving good total installed cost on a large volume production basis.

Strategic Growth Opportunities in the Low Temperature Curing Epoxy Agent Market

There will be longer-term growth in the low temperature curing epoxy agent market as manufacturers continue to cut energy use by eliminating or reducing the use of curing ovens in the production process. According to Lucintel, 2024-2026 will see the creation of commercial demand for low temperature curing epoxy agents driven by the production of electric vehicles, the maintenance of wind energy systems, and the reshoring of regional businesses. Lucintel has also noted demand for application specific formulations will grow over general or commodity systems.

• Components for Electric-vehicle Batteries: The use of low temperature curing epoxy agents can bond battery modules and busbars while also shielding sensors from the extremes of thermal expansion. The sale of over 1 million plug-in cars worldwide in January 2025 created a market for bonding that is temperature controlled. This market will grow as the trend in battery pack design will be for production of packs that can be assembled faster with temperature reduced process steps.
• Systems for Repairing Wind Turbines: The use of field curing agents for the filling of crack repairs and the reinforcement epoxy of composite fabric blades used in wind energy generation will provide a revenue stream beyond production. The United States reached 150 GW of installed wind energy capacity in March 2025, creating a large maintenance demand. Field curing will influence how blades are repaired because operators will be motivated to do in-field repairs as opposed to transporting the large blades to a shop for repairs.
• Low-energy Industrial Coatings: Epoxy systems curing below conventional baking temperatures can protect metal, electrical, and other equipment. In February 2025 the European Commission maintained its target of a 55% reduction in net greenhouse gas emissions by 2030 from 1990 levels. In environments where factories have begun measuring process emissions energy saving coatings will gain preference.
• Additive Manufacturing Tooling: Epoxy agents that cure at low temperatures can be used to produce jigs, molds, and fixtures from either polymer composites or printed patterns. At the time of this writing (April 2025), ASTM revealed there are over 130additive manufacturing standards and guides. This illustrates the maturity of the manufacturing industry. In the following five years, custom tooling will enable quicker design iterations and shorter production runs.
• Aftermarket Electronics Protection: Low-temperature encapsulants allow power, display, and control board repairs. In June 2025, it was reported that sales targets for global semiconductors for the month of June were reached, at a total of $59 billion. This will allow more equipment to be deployed. Electronics will move to a service-led economy due to the increased difficulty to replace them in an economically viable way.

With energy costs, field service, and substrate sensitivity, lower temperature chemistries will take precedence. Formulation partnerships, combined with validated cure data and local technical assistance should take precedence over the size of product offerings. The highest potential returns will come from renewable energy infrastructure repair and digitally produced tooling, as well as electronics repair and batteries, especially applications with measurable reductions in cycle time or energy consumption.

Low Temperature Curing Epoxy Agent Market Drivers and Challenges

Low temperature curing epoxy agent market trends depend on the application of technology, customer requirements, sustainability, the economy, and legislation. Technology has a role to play in developing curing processes, production, consumption of energy, and the end-use markets in construction, automotive, electronics, aerospace, and renewable energy. Lucintel mentioned the role that material innovation and the broadening of the application of materials have on the market position of a company. There are a number of other challenges that include the uncertainty of the supply chain, the cost of raw materials and the level of requirement. The market participants over the next few years will have to find a balance of all the challenges that exist to create new and profitable business opportunities.

Factors driving the low temperature curing epoxy agent market:

• Increased Demand for Energy Efficient Processing: More manufacturers have a preference for curing systems that use lower temperatures as these systems help reduce the energy consumption of ovens, and shorten preparation times for other processing steps, and keep sensitive heat substrates to a minimum. High industrial energy prices for several of the key manufacturing regions in January 2025 stayed high above the pre-2021 ranges. For the next three to five years, efficiency in energy use will drive buying, as costs in operations will decrease and there will be more flexibility in reducing carbon emissions.
• Growth in The Field of Electronics and EVs: Many innovative applications are utilizing low temperature curing epoxy agents in encapsulation, bonding, insulation, battery components, sensors, and lightweight assemblies. There were approximately 17 million electric vehicles sold in 2024, a number which will drive demand for materials in 2025 and beyond. In the coming years, the field of electronics will require speed, adhesion, thermal stability, and low-temperature processing for sensitive components. This will drive innovation in the field of epoxy systems.
• Innovation in Epoxy Resins: The development of epoxy systems relies on catalysts, diluents, toughening systems, and chemistry to provide stronger adhesion, faster curing at lower viscosities, and improved resistance to moisture and water absorption. During 2025, a large number of industry research groups aimed to develop epoxy systems curing at room temperature and below 100°C. In the coming years, more innovative formulations will allow epoxy suppliers to meet the gaps in product offerings and provide solutions for more demanding specifications.
• Sustainability and Regulation: Firmer environmental regulations result in a focus on producing products that use more sustainable materials and less hazardous and energy-intensive processes. During 2025, the EU directives for sustainability and compliance with chemical regulations increased reporting requirements. In the coming years, low VOC, bio-based, safer chemistry, and epoxy systems with improved performance will be the primary focus due to the need to meet sustainability goals and reduction in the total lifecycle cost.
• Increased Demand for Advanced Infrastructure and Renewable Energy: Stronger demand for materials related to wind energy, solar power, and other renewable sources is expected in 2025 following a 14% global increase in installed renewable power capacity in 2024. Over the next three to five years, market expansion will occur due to sustained investment in infrastructure. Low temperature cure adhesives and coatings will make it possible to perform repairs, assemble, and maintain equipment, even in remote locations devoid of high temperature equipment and machinery, in this case, cure ovens.

Challenges to this market include:

• Price and Supply Fluctuations of Raw Materials: Multiple factors, including supply chain disruptions, fluctuating crude oil prices, and complex global supply chains, influence the cost and availability of epoxy resins, curing agents and specialty additives. During 2025, prices and the shipping duration of chemicals used in manufacturing continued to be adversely impacted. We expect similar impacts in the next three to five years. Raw material price increases will lead to contracts which are more volatile and less favorable to customers, who will then be motivated to select competing offerings, more flexible raw material suppliers, recycled raw materials, and/or low cost chemicals.
• Performance Constraints at Low Cure Temperatures: Systems with a low cure temperature often yield trade-offs, such as reduced hardness, insufficient long-term adhesion, poor chemical resistance, low glass transition temperature, and brittleness. Reliability testing may take many months for newly developed adhesive systems. During the next three to five years, suppliers must make significant improvements to product consistency and system validation, to ensure that low-cure systems match the performance of traditional high-cure systems.
• Complex Regulatory and Qualification Requirements: Aerospace, automotive, and electronics all use epoxy agents that undergo rigorous safety, emission, reliability, and chemical compliance assessments. Safety testing adds costs, and the newly adopted 2025 global emissions regulations will require additional reporting. In the next 3-5 years manufacturers and importers may see an even greater burden on their systems caused by the increasing fragmentation of regulations.

The market for low temperature curing epoxy agents will grow due to demand for lower energy consumption during epoxy curing, faster processing, and having reliable bonds. Furthermore, these epoxy agents will gain even more market traction due to increasing demand from growing industries like renewable and sustainable energy, electrification, and infrastructure all of which will require significant investment. Epoxy agents will have performance and sustainability formulations and should be able to fulfill the demands of the high growth market. There are some concerns in this market, such as the slow adoption due to the market forces of increased volatility of raw materials, increased regulations, and made trade-offs. Successful companies in the market will have a focus on validated formulations, and the applications of the product, especially with environmental concerns.

List of Low Temperature Curing Epoxy Agent Market Companies

Companies in the market compete on the basis of product quality offered. Major players in this market focus on expanding their manufacturing facilities, R&D investments, infrastructural development, and leverage integration opportunities across the value chain. Through these strategies low temperature curing epoxy agent market companies cater increasing demand, ensure competitive effectiveness, develop innovative products & technologies, reduce production costs, and expand their customer base. Some of the low temperature curing epoxy agent market companies profiled in this report include-

• Huntsman
• Hexion
• Westlake
• 3M
• Olin Corporation
• Kukdo
• Allnex
• Sanmu Group
• Yyhuaxing
• Chang Chun Group

Low Temperature Curing Epoxy Agent Market by Segment

The study includes a forecast for the global low temperature curing epoxy agent market by type, application, and region.

Low Temperature Curing Epoxy Agent Market by Type [Value ($M) from 2019 to 2035]:

• One Component Epoxy
• Two Component Epoxy

Low Temperature Curing Epoxy Agent Market by Application [Value ($M) from 2019 to 2035]:

• Paints and Coatings
• Adhesives
• Composites
• Electrical and Electronics
• Others

Low Temperature Curing Epoxy Agent Market by Region [Value ($M) from 2019 to 2035]:

• North America
• Europe
• Asia Pacific
• The Rest of the World

Country Wise Outlook for the Low Temperature Curing Epoxy Agent Market

The market for low temperature curing epoxy agents is being impacted by the localization of chemical production, strict carbon policies, and the need for faster assembly in the increasing demand for electronic, transportation, and renewable energy devices. As of 2022, according to Lucintel, suppliers will focus on formulation and regional production until 2027.

• United States: Accelerating domestic materials investments include $6.3 billion allocated by the U.S. Department of Energy to advanced composites and adhesive technologies in January 2025. This will encourage energy efficient and fast production processes for advanced composites and adhesives used in aerospace, automotive, and other electric technologies over the next 3 to 5 years.
• China: Wanhua Chemical focused on continued expansion of epoxy materials production. China's 2025 Industrial policy maintained support for high-quality resins and electronic chemicals. In March 2025 the government mandated more than 70% domestic supply capacity of key new materials. This will increase qualification and capacity for curing agents in the electronics, wind equipment, and infrastructure sectors.
• Germany: BASF continued investments in specialty materials focusing on low emission processes, including €46.4 billion of 2024 sales and a dedicated €3.2 - €3.6 billion for 2025. Epoxy systems for fast curing will benefit from the focus on lightweight and electrified materials.
• India: The government's 2025 budget placed ₹1.5 trillion towards long-term infra-structure lending. Domestic electronics and renewable energy manufacturing remain incentivized. In February, ₹229.19 billion was allocated towards encouraging domestic production of adhesives, development of strategic partnerships, and lower temperature assembly of electronics, batteries, and associated equipment.
• Japan: The Mitsubishi Chemical Group in 2025 continued investment in its advanced materials and semiconductor businesses. The company reported group consolidated sales of ¥4.4 trillion for the year ended in May. With its high performance materials, the company expects to complete the qualification of low temperature epoxy agents for semiconductor packaging, automotive electrics, and power modules.

Features of the Global Low Temperature Curing Epoxy Agent Market

• Market Size Estimates: low temperature curing epoxy agent market size estimation in terms of value ($B).
• Trend and Forecast Analysis: Market trends (2019 to 2026) and forecast (2027 to 2035) by various segments and regions.
• Segmentation Analysis: low temperature curing epoxy agent market size by type, application, and region in terms of value ($B).
• Regional Analysis: low temperature curing epoxy agent market breakdown by North America, Europe, Asia Pacific, and Rest of the World.
• Growth Opportunities: Analysis of growth opportunities in different types, applications, and regions for the low temperature curing epoxy agent market.
• Strategic Analysis: This includes M&A, new product development, and competitive landscape of the low temperature curing epoxy agent market.

Analysis of competitive intensity of the industry based on Porter's Five Forces model.

If you are looking to expand your business in this or adjacent markets, then contact us. We have done hundreds of strategic consulting projects in market entry, opportunity screening, due diligence, supply chain analysis, M & A, and more.

This report answers following 11 key questions:

• Q.1. What are some of the most promising, high-growth opportunities for the low temperature curing epoxy agent market by type (one component epoxy and two component epoxy), application (paints and coatings, adhesives, composites, electrical and electronics, and others), and region (North America, Europe, Asia Pacific, and the Rest of the World)?
• Q.2. Which segments will grow at a faster pace and why?
• Q.3. Which region will grow at a faster pace and why?
• Q.4. What are the key factors affecting market dynamics? What are the key challenges and business risks in this market?
• Q.5. What are the business risks and competitive threats in this market?
• Q.6. What are the emerging trends in this market and the reasons behind them?
• Q.7. What are some of the changing demands of customers in the market?
• Q.8. What are the new developments in the market? Which companies are leading these developments?
• Q.9. Who are the major players in this market? What strategic initiatives are key players pursuing for business growth?
• Q.10. What are some of the competing products in this market and how big of a threat do they pose for loss of market share by material or product substitution?
• Q.11. What M&A activity has occurred in the last 6 years and what has its impact been on the industry?

Table of Contents

1. Executive Summary

2. Market Overview

• 2.1 Background and Classifications
• 2.2 Supply Chain

3. Market Trends & Forecast Analysis

• 3.2 Industry Drivers and Challenges
• 3.3 PESTLE Analysis
• 3.4 Patent Analysis
• 3.5 Regulatory Environment

4. Global Low Temperature Curing Epoxy Agent Market by Type

• 4.1 Overview
• 4.2 Attractiveness Analysis by Type
• 4.3 One Component Epoxy: Trends and Forecast (2019-2035)
• 4.4 Two Component Epoxy: Trends and Forecast (2019-2035)

5. Global Low Temperature Curing Epoxy Agent Market by Application

• 5.1 Overview
• 5.2 Attractiveness Analysis by Application
• 5.3 Paints and Coatings: Trends and Forecast (2019-2035)
• 5.4 Adhesives: Trends and Forecast (2019-2035)
• 5.5 Composites: Trends and Forecast (2019-2035)
• 5.6 Electrical and Electronics: Trends and Forecast (2019-2035)
• 5.7 Others: Trends and Forecast (2019-2035)

6. Regional Analysis

• 6.1 Overview
• 6.2 Global Low Temperature Curing Epoxy Agent Market by Region

7. North American Low Temperature Curing Epoxy Agent Market

• 7.1 Overview
• 7.2 North American Low Temperature Curing Epoxy Agent Market by Type
• 7.3 North American Low Temperature Curing Epoxy Agent Market by Application
• 7.4 United States Low Temperature Curing Epoxy Agent Market
• 7.5 Mexican Low Temperature Curing Epoxy Agent Market
• 7.6 Canadian Low Temperature Curing Epoxy Agent Market

8. European Low Temperature Curing Epoxy Agent Market

• 8.1 Overview
• 8.2 European Low Temperature Curing Epoxy Agent Market by Type
• 8.3 European Low Temperature Curing Epoxy Agent Market by Application
• 8.4 German Low Temperature Curing Epoxy Agent Market
• 8.5 French Low Temperature Curing Epoxy Agent Market
• 8.6 Spanish Low Temperature Curing Epoxy Agent Market
• 8.7 Italian Low Temperature Curing Epoxy Agent Market
• 8.8 United Kingdom Low Temperature Curing Epoxy Agent Market

9. APAC Low Temperature Curing Epoxy Agent Market

• 9.1 Overview
• 9.2 APAC Low Temperature Curing Epoxy Agent Market by Type
• 9.3 APAC Low Temperature Curing Epoxy Agent Market by Application
• 9.4 Japanese Low Temperature Curing Epoxy Agent Market
• 9.5 Indian Low Temperature Curing Epoxy Agent Market
• 9.6 Chinese Low Temperature Curing Epoxy Agent Market
• 9.7 South Korean Low Temperature Curing Epoxy Agent Market
• 9.8 Indonesian Low Temperature Curing Epoxy Agent Market

10. ROW Low Temperature Curing Epoxy Agent Market

• 10.1 Overview
• 10.2 ROW Low Temperature Curing Epoxy Agent Market by Type
• 10.3 ROW Low Temperature Curing Epoxy Agent Market by Application
• 10.4 Middle Eastern Low Temperature Curing Epoxy Agent Market
• 10.5 South American Low Temperature Curing Epoxy Agent Market
• 10.6 African Low Temperature Curing Epoxy Agent Market

11. Competitor Analysis

• 11.1 Product Portfolio Analysis
• 11.2 Operational Integration
• 11.3 Porter's Five Forces Analysis
  • Competitive Rivalry
  • Bargaining Power of Buyers
  • Bargaining Power of Suppliers
  • Threat of Substitutes
  • Threat of New Entrants
• 11.4 Market Share Analysis

12. Opportunities & Strategic Analysis

• 12.1 Value Chain Analysis
• 12.2 Growth Opportunity Analysis
  • 12.2.1 Growth Opportunities by Type
  • 12.2.2 Growth Opportunities by Application
• 12.3 Emerging Trends in the Global Low Temperature Curing Epoxy Agent Market
• 12.4 Strategic Analysis
  • 12.4.1 New Product Development
  • 12.4.2 Certification and Licensing
  • 12.4.3 Mergers, Acquisitions, Agreements, Collaborations, and Joint Ventures

13. Company Profiles of the Leading Players Across the Value Chain

• 13.1 Competitive Analysis
• 13.2 Huntsman
  • Company Overview
  • Low Temperature Curing Epoxy Agent Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.3 Hexion
  • Company Overview
  • Low Temperature Curing Epoxy Agent Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.4 Westlake
  • Company Overview
  • Low Temperature Curing Epoxy Agent Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.5 3M
  • Company Overview
  • Low Temperature Curing Epoxy Agent Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.6 Olin Corporation
  • Company Overview
  • Low Temperature Curing Epoxy Agent Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.7 Kukdo
  • Company Overview
  • Low Temperature Curing Epoxy Agent Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.8 Allnex
  • Company Overview
  • Low Temperature Curing Epoxy Agent Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.9 Sanmu Group
  • Company Overview
  • Low Temperature Curing Epoxy Agent Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.10 Yyhuaxing
  • Company Overview
  • Low Temperature Curing Epoxy Agent Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.11 Chang Chun Group
  • Company Overview
  • Low Temperature Curing Epoxy Agent Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing

14. Appendix

• 14.1 List of Figures
• 14.2 List of Tables
• 14.3 Research Methodology
• 14.4 Disclaimer
• 14.5 Copyright
• 14.6 Abbreviations and Technical Units
• 14.7 About Us
• 14.8 Contact Us