세계의 질량 유량 컨트롤러 시장 : 금속 및 엘라스토머 씰, 유량, 가스 및 액체, 열, 차압 및 코리올리, 스테인레스 스틸, 웨이퍼 세정, 플라즈마 에칭, 카탈리스트 연구, 에어레이션 - 예측(-2029년)

The global mass flow controller market was valued at USD 1.63 billion in 2024 and is projected to reach USD 2.32 billion by 2029; it is expected to register a CAGR of 7.2% during the forecast period. Rising focus on hydrogen fuel cells is driving the growth of the mass flow controller market. As fuel cells continue to gain prominence as a clean and efficient energy source, the need mass flow comntroller during fuel cell operation has become critical. Whereas complexities associated in integrating mass flow controllers with other technologies posses challenge for the growth of the mass flow controller market.

"The Coriolis mass flow controller is expected to grow at the highest CAGR during the forecast period."

A Coriolis mass flow controller has been seen as the only flow sensor that actually measures the mass flow in a directly manner. This distinctive capability underpins the accuracy of Coriolis flow controllers: They quantify the mass flow rate of a fluid in a straightforward manner, that is without having to integrate or include other properties of the fluid into the measurement. This means that the Coriolis flow controllers offers accurate mass flow rates irrespective of changes in density, viscosity or specific heat of the flowing liquid or gas. For this reason, Coriolis mass flow controllers remain insensitive to shifts in properties of the fluid.

"Digital mass flow controllers segment is likely to have a larger market share during the forecast period."

Digital mass flow controllers use highly developed sensors, microprocessors and complex algorithms, and thus boast of higher accuracy in the measurement of flow rates and control of the same. These applications include manufacturing of semiconductors besides other precision processes like those used in the manufacture of chemicals. Additionally, the integration of the digital technologies leads to the enhanced control possibilities, automatic control, calibration as well as remote control, all of which highly enhances the overall operation. Digital mass flow controllers also are more constants and stable, has less maintenance requirement and has lower run cost due to its measurement drift and self-calibration capabilities.

"The Asia Pacific segment is likely to grow at the second highest CAGR during the forecast period."

The market in Asia Pacific is expected to witness the second highest CAGR of 28.4% during the forecast period. The region witnessed substantial investments in semiconductor manufacturing infrastructure, driven by both government initiatives and private enterprises aiming to establish semiconductor manufacturing plants.. Increasing investments in the semiconductor industry, rising demand for efficient devices for measurement and control, and industrial automation are among the major factors driving the market growth in this region. Most key players operating in the mass flow controller market have their production capacity in Asia Pacific, as the production cost in this region is lower than that of other regions

Breakdown of primaries

The study contains insights from various industry experts, ranging from component suppliers to Tier 1 companies and OEMs. The break-up of the primaries is as follows:

• By Company Type - Tier 1 - 40%, Tier 2 - 35%, Tier 3 - 25%
• By Designation- C-level Executives - 48%, Directors - 33%, Others - 19%
• By Region-North America - 35%, Europe - 18%, Asia Pacific - 40%, RoW - 7%

The mass flow controller market is dominated by a few globally established players such as HORIBA, Ltd. (Japan), Sensirion AG (Switzerland), MKS Instruments (US), Teledyne Technologies Incorporated (US), Bronkhorst (Netherlands), Brooks Instrument (US) Christian Burkert GmbH & Co. KG (Germany), Sierra Instruments, Inc. (US), Alicat Scientific Inc. (US), and PARKER HANIIFIN CORP (US). The study includes an in-depth competitive analysis of these key players in the mass flow controller market, with their company profiles, recent developments, and key market strategies.

Research Coverage:

The report segments the mas flow controller market and forecasts its size by product specification, material type, media type, flow rate, technology, connectivity, end-user industry and region. The report also discusses the drivers, restraints, opportunities, and challenges pertaining to the market. It gives a detailed view of the market across four main regions-North America, Europe, Asia Pacific, and RoW. Supply chain analysis has been included in the report, along with the key players and their competitive analysis in the mass flow controller market.

Key Benefits to Buy the Report:

• Analysis of key drivers (Expansion of solar cell manufacturing, increased investments in semiconductors and electronics production, and growing focus on hydrogen fuel cells as renewable energy source). Restraint (Calibration dependency), Opportunities (Use of mass flow controllers in space applications, Government initiatives to boost semiconductor manufacturing in Asia Pacific), Challenges (complexities associated in integration with other technologies)
• Product Development/Innovation: Detailed insights on upcoming technologies, research and development activities, and new product launches in the mass flow controller market.
• Market Development: Comprehensive information about lucrative markets - the report analyses the mass flow controller market across varied regions.
• Market Diversification: Exhaustive information about new products and services, untapped geographies, recent developments, and investments in the mass flow controller market.

Competitive Assessment: In-depth assessment of market shares, growth strategies, and service offerings of leading players as HORIBA, Ltd. (Japan), Sensirion AG (Switzerland), MKS Instruments (US), Teledyne Technologies Incorporated (US), Bronkhorst (Netherlands), Brooks Instrument (US) Christian Burkert GmbH & Co. KG (Germany), Sierra Instruments, Inc. (US), Alicat Scientific Inc. (US), and PARKER HANIIFIN CORP (US) among others in the mass flow controller market.

TABLE OF CONTENTS

1 INTRODUCTION

• 1.1 STUDY OBJECTIVES
• 1.2 MARKET DEFINITION
• 1.3 STUDY SCOPE
  • 1.3.1 MARKETS COVERED AND REGIONAL SCOPE
  • 1.3.2 INCLUSIONS AND EXCLUSIONS
  • 1.3.3 YEARS CONSIDERED
• 1.4 CURRENCY CONSIDERED
• 1.5 LIMITATIONS
• 1.6 UNITS CONSIDERED
• 1.7 STAKEHOLDERS
• 1.8 SUMMARY OF CHANGES

2 RESEARCH METHODOLOGY

• 2.1 RESEARCH DATA
  • 2.1.1 SECONDARY DATA
    • 2.1.1.1 List of key secondary sources
    • 2.1.1.2 Key data from secondary sources
  • 2.1.2 PRIMARY DATA
    • 2.1.2.1 List of key interview participants
    • 2.1.2.2 Breakdown of primaries
    • 2.1.2.3 Key data from primary sources
    • 2.1.2.4 Key industry insights
  • 2.1.3 SECONDARY AND PRIMARY RESEARCH
• 2.2 MARKET SIZE ESTIMATION
  • 2.2.1 BOTTOM-UP APPROACH
    • 2.2.1.1 Approach to estimate market size using bottom-up analysis
  • 2.2.2 TOP-DOWN APPROACH
    • 2.2.2.1 Approach to estimate market size using top-down analysis
• 2.3 DATA TRIANGULATION
• 2.4 RESEARCH ASSUMPTIONS
• 2.5 RESEARCH LIMITATIONS
• 2.6 RISK ANALYSIS

3 EXECUTIVE SUMMARY

4 PREMIUM INSIGHTS

• 4.1 ATTRACTIVE GROWTH OPPORTUNITIES FOR PLAYERS IN MASS FLOW CONTROLLER MARKET
• 4.2 MASS FLOW CONTROLLER MARKET, BY MATERIAL
• 4.3 MASS FLOW CONTROLLER MARKET, BY FLOW RATE
• 4.4 MASS FLOW CONTROLLER MARKET, BY MEDIA TYPE
• 4.5 MASS FLOW CONTROLLER MARKET, BY END-USE INDUSTRY
• 4.6 MASS FLOW CONTROLLER MARKET, BY REGION
• 4.7 MASS FLOW CONTROLLER MARKET, BY TECHNOLOGY
• 4.8 MASS FLOW CONTROLLER MARKET, BY CONNECTIVITY
• 4.9 MASS FLOW CONTROLLER MARKET, BY COUNTRY

5 MARKET OVERVIEW

• 5.1 INTRODUCTION
• 5.2 MARKET DYNAMICS
  • 5.2.1 DRIVERS
    • 5.2.1.1 Rising emphasis on developing solar projects
    • 5.2.1.2 Expanding semiconductor industry
    • 5.2.1.3 Generation of renewable energy with hydrogen fuel cells
  • 5.2.2 RESTRAINTS
    • 5.2.2.1 Dependency on calibration
  • 5.2.3 OPPORTUNITIES
    • 5.2.3.1 Application in space stations
    • 5.2.3.2 Government-led initiatives to boost semiconductor manufacturing
  • 5.2.4 CHALLENGES
    • 5.2.4.1 Complexities associated with integrating mass flow controllers within other devices
• 5.3 TRENDS/DISRUPTIONS IMPACTING CUSTOMER BUSINESS
• 5.4 PRICING ANALYSIS
  • 5.4.1 AVERAGE SELLING PRICE TREND OF KEY PLAYERS, BY CONNECTIVITY
  • 5.4.2 AVERAGE SELLING PRICE TREND OF MASS FLOW CONTROLLERS, 2019-2023
  • 5.4.3 INDICATIVE PRICING TREND, BY REGION
• 5.5 VALUE CHAIN ANALYSIS
• 5.6 ECOSYSTEM ANALYSIS
• 5.7 INVESTMENT AND FUNDING SCENARIO
• 5.8 IMPACT OF AI/GENERATIVE AI ON MASS FLOW CONTROLLER MARKET
  • 5.8.1 INTRODUCTION
  • 5.8.2 AI/GENERATIVE AI-SPECIFIC USE CASES
• 5.9 TECHNOLOGY ANALYSIS
  • 5.9.1 KEY TECHNOLOGIES
    • 5.9.1.1 Micro-electro-mechanical systems
    • 5.9.1.2 IoT
  • 5.9.2 COMPLIMENTARY TECHNOLOGIES
    • 5.9.2.1 Industrial ethernet
    • 5.9.2.2 Digital signal processing
  • 5.9.3 ADJACENT TECHNOLOGIES
    • 5.9.3.1 Nanotechnology
• 5.10 PATENT ANALYSIS
• 5.11 TRADE ANALYSIS
  • 5.11.1 IMPORT DATA (HS CODE 902610)
  • 5.11.2 EXPORT DATA (HS CODE 902610)
• 5.12 KEY CONFERENCES AND EVENTS, 2023-2024
• 5.13 CASE STUDY ANALYSIS
  • 5.13.1 ILS COLLABORATED WITH ALICAT TO ADDRESS MASS FLOW CONTROLLERS SOURCING-RELATED CHALLENGES
  • 5.13.2 HORIBA HELPED NOAA WITH Z500 FLOW CONTROLLERS THAT PROVIDED STABLE AND CONSISTENT FLOW RATE
  • 5.13.3 ALICAT ASSISTED VALCO INTEGRATE MULTIPLE BASIS OEM MASS FLOW CONTROLLERS INTO DYNACAL DEVICES THAT MANAGED LOW GAS FLOW RATES
  • 5.13.4 BROOKS ASSISTED RAHR WITH SLAMF MASS FLOW CONTROLLERS THAT IMPROVED BREWERIES' PRODUCTION AND EFFICIENCY
  • 5.13.5 DURALAR PARTNERED WITH ALICAT TO ENGINEER CORROSION-RESISTANT FLOW CONTROLLER WITH CUSTOM GAS CALIBRATION
• 5.14 REGULATORY LANDSCAPE
  • 5.14.1 REGULATORY BODIES, GOVERNMENT AGENCIES, AND OTHER ORGANIZATIONS
  • 5.14.2 STANDARDS
• 5.15 PORTER'S FIVE FORCES ANALYSIS
  • 5.15.1 THREAT OF NEW ENTRANTS
  • 5.15.2 THREAT OF SUBSTITUTES
  • 5.15.3 BARGAINING POWER OF BUYERS
  • 5.15.4 BARGAINING POWER OF SUPPLIERS
  • 5.15.5 INTENSITY OF COMPETITIVE RIVALRY
• 5.16 KEY STAKEHOLDERS AND BUYING CRITERIA
  • 5.16.1 KEY STAKEHOLDERS IN BUYING PROCESS
  • 5.16.2 BUYING CRITERIA

6 MASS FLOW CONTROLLER MARKET, BY PRODUCT SPECIFICATION

• 6.1 INTRODUCTION
• 6.2 DISPLAYS
  • 6.2.1 WITH DISPLAY
    • 6.2.1.1 Enhanced control through immediate visual monitoring to drive market
  • 6.2.2 WITHOUT DISPLAY
    • 6.2.2.1 Low manufacturing costs to spur demand
• 6.3 SEALS
  • 6.3.1 METALS
    • 6.3.1.1 Ability to withstand harsh environmental conditions to boost demand
  • 6.3.2 ELASTOMER
    • 6.3.2.1 Reduced friction and minimal gas leakages to drive market
• 6.4 ACCURACY
  • 6.4.1 STANDARD
    • 6.4.1.1 Increasing adoption in HVAC systems and non-critical laboratory environments to fuel market growth
  • 6.4.2 HIGH
    • 6.4.2.1 Rising adoption in semiconductor manufacturing to accelerate demand

7 MASS FLOW CONTROLLER MARKET, BY MATERIAL

• 7.1 INTRODUCTION
• 7.2 STAINLESS STEEL
  • 7.2.1 HIGH RESISTANCE TO CORROSION AND SULFIDES TO DRIVE MARKET
• 7.3 ALLOYS
  • 7.3.1 RISING NEED FOR ALLOYS CONTAINING CHROME AND MOLYBDENUM TO BOOST DEMAND
• 7.4 OTHER MATERIALS

8 MASS FLOW CONTROLLER MARKET, BY MEDIA TYPE

• 8.1 INTRODUCTION
• 8.2 GAS
  • 8.2.1 GROWING ADOPTION FOR CATALYST RESEARCH TO SPUR DEMAND
• 8.3 LIQUID
  • 8.3.1 ABILITY TO OFFER FAST AND ACCURATE MEASURING SIGNALS TO BOOST DEMAND

9 MASS FLOW CONTROLLER MARKET, BY FLOW RATE

• 9.1 INTRODUCTION
• 9.2 LOW
  • 9.2.1 INCREASING APPLICATION IN MANUFACTURING SEMICONDUCTOR CHIPS TO DRIVE MARKET
• 9.3 MEDIUM
  • 9.3.1 RISING USE IN FLUID AND GAS MIXING AND DOSING SYSTEMS TO SPUR DEMAND
• 9.4 HIGH
  • 9.4.1 GROWING APPLICATION IN GAS MEASUREMENT TO ACCELERATE DEMAND

10 MASS FLOW CONTROLLER MARKET, BY TECHNOLOGY

• 10.1 INTRODUCTION
• 10.2 THERMAL
  • 10.2.1 ABILITY TO HANDLE DIVERSE RANGE OF GASES WITH VARYING THERMAL PROPERTIES TO DRIVE MARKET
• 10.3 DIFFERENTIAL PRESSURE
  • 10.3.1 INCREASING APPLICATION IN SEMICONDUCTOR MANUFACTURING, CHEMICAL PROCESSING, AND AEROSPACE TESTING TO BOOST DEMAND
• 10.4 CORIOLIS
  • 10.4.1 ELIMINATION OF ADDITIONAL COMPENSATION FOR TEMPERATURE OR PRESSURE VARIATIONS TO SPUR DEMAND

11 MASS FLOW CONTROLLER MARKET, BY CONNECTIVITY

• 11.1 INTRODUCTION
• 11.2 ANALOG
  • 11.2.1 INCREASING DEMAND FOR COST-EFFECTIVE CONTROL SYSTEMS TO SPUR DEMAND
• 11.3 DIGITAL
  • 11.3.1 IMPLEMENTATION OF ADVANCED MICROPROCESSOR TECHNOLOGY TO OBTAIN REAL-TIME MONITORING TO ACCELERATE DEMAND
  • 11.3.2 PROFIBUS
  • 11.3.3 RS-485
  • 11.3.4 PROFINET
  • 11.3.5 ETHERCAT
  • 11.3.6 ETHERNET/IP
  • 11.3.7 MODBUS RTU
  • 11.3.8 MODBUS TCP/IP
  • 11.3.9 DEVICENET
  • 11.3.10 FOUNDATION FIELDBUS

12 MASS FLOW CONTROLLER MARKET, BY END-USE INDUSTRY

• 12.1 INTRODUCTION
• 12.2 SEMICONDUCTORS
  • 12.2.1 INCREASING APPLICATION FOR WAFER CLEANING AND PCB TREATMENT TO BOOST DEMAND
  • 12.2.2 WAFER CLEANING
  • 12.2.3 THIN FILM DEPOSITION
  • 12.2.4 SPRAY COATING
  • 12.2.5 PLASMA ETCHING
  • 12.2.6 VACUUM SPUTTERING
• 12.3 OIL & GAS
  • 12.3.1 RISING ADOPTION FOR UPSTREAM PRODUCTION AND PIPELINE DETECTION TO SPUR DEMAND
  • 12.3.2 ODORIZATION OF BIOGAS
  • 12.3.3 HEAVY FUEL OIL ADDITIVE DOSING
  • 12.3.4 FRACKING
• 12.4 CHEMICALS
  • 12.4.1 INCREASING APPLICATION IN CHEMICAL REACTORS AND GAS SAMPLING TO DRIVE MARKET
  • 12.4.2 CATALYST RESEARCH
  • 12.4.3 LIQUEFIED GAS DOSING
• 12.5 PHARMACEUTICALS
  • 12.5.1 IMPROVED ACCURACY OF VENTILATION DEVICES TO DRIVE MARKET
  • 12.5.2 PILL COATING
  • 12.5.3 CONTINUOUS MANUFACTURING
• 12.6 METALS & MINING
  • 12.6.1 REDUCED WASTAGE AND DOWNTIME TO SPUR DEMAND
  • 12.6.2 SELECTIVE LASER MELTING
  • 12.6.3 SMELTING
• 12.7 WATER & WASTEWATER TREATMENT
  • 12.7.1 EXPANDING GLOBAL POPULATION AND RAPID INDUSTRIALIZATION TO DRIVE DEMAND
  • 12.7.2 PH CONTROL
• 12.8 FOOD & BEVERAGES
  • 12.8.1 GROWING APPLICATION FOR ADJUSTING PH-LEVEL AND BLANKETING OF INERT GASES TO BOOST DEMAND
  • 12.8.2 AERATION
  • 12.8.3 ASEPTIC PACKAGING
• 12.9 OTHER END-USE INDUSTRIES
  • 12.9.1 LAMBDA PROBE TESTING

13 MASS FLOW CONTROLLER MARKET, BY REGION

• 13.1 INTRODUCTION
• 13.2 NORTH AMERICA
  • 13.2.1 MACROECONOMIC OUTLOOK FOR NORTH AMERICA
  • 13.2.2 US
    • 13.2.2.1 Growing application for catalyst research and spray coating to drive market
  • 13.2.3 CANADA
    • 13.2.3.1 Expanding pharmaceutical and medical research industries to spur demand
  • 13.2.4 MEXICO
    • 13.2.4.1 Rising industrial expansion to accelerate demand
• 13.3 EUROPE
  • 13.3.1 MACROECONOMIC OUTLOOK FOR EUROPE
  • 13.3.2 GERMANY
    • 13.3.2.1 Government-led initiatives to address energy crisis to boost demand
  • 13.3.3 UK
    • 13.3.3.1 Increasing need for efficient control mechanisms in pharmaceutical and semiconductor industries to drive market
  • 13.3.4 FRANCE
    • 13.3.4.1 Growing need for chemicals in metal & mining and automotive industries to fuel market growth
  • 13.3.5 REST OF EUROPE
• 13.4 ASIA PACIFIC
  • 13.4.1 MACROECONOMIC OUTLOOK FOR ASIA PACIFIC
  • 13.4.2 CHINA
    • 13.4.2.1 Government-led initiatives to support connected technologies to offer lucrative growth opportunities
  • 13.4.3 INDIA
    • 13.4.3.1 Rising inflow of FDIs in semiconductor industry to accelerate demand
  • 13.4.4 JAPAN
    • 13.4.4.1 Growing emphasis on innovating mass flow controllers to offer lucrative growth opportunities
  • 13.4.5 TAIWAN
    • 13.4.5.1 Presence of leading players to drive market
  • 13.4.6 SOUTH KOREA
    • 13.4.6.1 Thriving consumer electronics industry to boost demand
  • 13.4.7 REST OF ASIA PACIFIC
• 13.5 ROW
  • 13.5.1 MACROECONOMIC OUTLOOK FOR ROW
  • 13.5.2 SOUTH AMERICA
    • 13.5.2.1 Growing demand in semiconductor, chemical, and oil & gas industries to fuel market growth
  • 13.5.3 MIDDLE EAST & AFRICA
    • 13.5.3.1 Rising economic and industrial transformation to offer lucrative growth opportunities
    • 13.5.3.2 GCC
    • 13.5.3.3 Rest of Middle East & Africa

14 COMPETITIVE LANDSCAPE

• 14.1 OVERVIEW
• 14.2 KEY PLAYER STRATEGIES/RIGHT TO WIN, 2022-2024
• 14.3 REVENUE ANALYSIS, 2019-2023
• 14.4 MARKET SHARE ANALYSIS, 2023
• 14.5 COMPANY VALUATION AND FINANCIAL METRICS
• 14.6 BRAND/PRODUCT COMPARISON
• 14.7 COMPANY EVALUATION MATRIX: KEY PLAYERS, 2023
  • 14.7.1 STARS
  • 14.7.2 EMERGING LEADERS
  • 14.7.3 PERVASIVE PLAYERS
  • 14.7.4 PARTICIPANTS
  • 14.7.5 COMPANY FOOTPRINT: KEY PLAYERS, 2023
    • 14.7.5.1 Company footprint
    • 14.7.5.2 Material footprint
    • 14.7.5.3 Media type footprint
    • 14.7.5.4 End-use industry footprint
    • 14.7.5.5 Region footprint
• 14.8 COMPANY EVALUATION MATRIX: STARTUPS/SMES, 2023
  • 14.8.1 PROGRESSIVE COMPANIES
  • 14.8.2 RESPONSIVE COMPANIES
  • 14.8.3 DYNAMIC COMPANIES
  • 14.8.4 STARTING BLOCKS
  • 14.8.5 COMPETITIVE BENCHMARKING: STARTUPS/SMES, 2023
    • 14.8.5.1 Detailed list of key startups/SMEs
    • 14.8.5.2 Competitive benchmarking of key startups/SMEs
• 14.9 COMPETITIVE SCENARIO
  • 14.9.1 PRODUCT LAUNCHES
  • 14.9.2 DEALS

15 COMPANY PROFILES

• 15.1 KEY PLAYERS
  • 15.1.1 HORIBA, LTD.
    • 15.1.1.1 Business overview
    • 15.1.1.2 Products/Solutions/Services offered
    • 15.1.1.3 Recent developments
      • 15.1.1.3.1 Expansions
    • 15.1.1.4 MnM view
      • 15.1.1.4.1 Key strengths/Right to win
      • 15.1.1.4.2 Strategic choices
      • 15.1.1.4.3 Weaknesses/Competitive threats
  • 15.1.2 SENSIRION AG
    • 15.1.2.1 Business overview
    • 15.1.2.2 Products/Solutions/Services offered
    • 15.1.2.3 Recent developments
      • 15.1.2.3.1 Product launches/Developments
    • 15.1.2.4 MnM view
      • 15.1.2.4.1 Key strengths/Right to win
      • 15.1.2.4.2 Strategic choices
      • 15.1.2.4.3 Weaknesses/Competitive threats
  • 15.1.3 MKS INSTRUMENTS
    • 15.1.3.1 Business overview
    • 15.1.3.2 Products/Solutions/Services offered
    • 15.1.3.3 MnM view
      • 15.1.3.3.1 Key strengths/Right to win
      • 15.1.3.3.2 Strategic choices
      • 15.1.3.3.3 Weaknesses/Competitive threats
  • 15.1.4 TELEDYNE TECHNOLOGIES INCORPORATED
    • 15.1.4.1 Business overview
    • 15.1.4.2 Products/Solutions/Services offered
    • 15.1.4.3 Recent developments
      • 15.1.4.3.1 Deals
    • 15.1.4.4 MnM view
      • 15.1.4.4.1 Key strengths/Right to win
      • 15.1.4.4.2 Strategic choices
      • 15.1.4.4.3 Weaknesses/Competitive threats
  • 15.1.5 BRONKHORST
    • 15.1.5.1 Business overview
    • 15.1.5.2 Products/Solutions/Services offered
    • 15.1.5.3 Recent developments
      • 15.1.5.3.1 Product launches/Developments
    • 15.1.5.4 MnM view
      • 15.1.5.4.1 Key strengths/Right to win
      • 15.1.5.4.2 Strategic choices
      • 15.1.5.4.3 Weaknesses/Competitive threats
  • 15.1.6 BROOKS INSTRUMENT
    • 15.1.6.1 Business overview
    • 15.1.6.2 Products/Solutions/Services offered
    • 15.1.6.3 Recent developments
      • 15.1.6.3.1 Product launches/developments
      • 15.1.6.3.2 Deals
  • 15.1.7 CHRISTIAN BURKERT GMBH & CO. KG
    • 15.1.7.1 Business overview
    • 15.1.7.2 Products/Solutions/Services offered
    • 15.1.7.3 Recent developments
  • 15.1.8 SIERRA INSTRUMENTS, INC.
    • 15.1.8.1 Business overview
    • 15.1.8.2 Products/Solutions/Services offered
    • 15.1.8.3 Recent developments
      • 15.1.8.3.1 Product launches/Developments
  • 15.1.9 ALICAT SCIENTIFIC, INC.
    • 15.1.9.1 Business overview
    • 15.1.9.2 Products/Solutions/Services offered
    • 15.1.9.3 Recent developments
      • 15.1.9.3.1 Product launches/Developments
  • 15.1.10 PARKER HANNIFIN CORP
    • 15.1.10.1 Business overview
    • 15.1.10.2 Products/Solutions/Services offered
• 15.2 OTHER PLAYERS
  • 15.2.1 TOKYO KEISO CO., LTD.
  • 15.2.2 VOGTLIN INSTRUMENTS GMBH
  • 15.2.3 AZBIL CORPORATION
  • 15.2.4 SABLE SYSTEMS INTERNATIONAL
  • 15.2.5 KOFLOC
  • 15.2.6 AALBORG
  • 15.2.7 AXETRIS AG
  • 15.2.8 DWYER INSTRUMENTS, LLC.
  • 15.2.9 FCON CO., LTD.
  • 15.2.10 KELLY PNEUMATICS, INC.
  • 15.2.11 IMI
  • 15.2.12 PROTERIAL, LTD.
  • 15.2.13 MTI CORPORATION
  • 15.2.14 OHKURA ELECTRIC CO., LTD.
  • 15.2.15 DAKOTA INSTRUMENTS, INC.

16 ADJACENT & RELATED MARKETS

• 16.1 INTRODUCTION
• 16.2 MARKET SCOPE
• 16.3 SEMICONDUCTOR MANUFACTURING EQUIPMENT MARKET, BY FAB FACILITY EQUIPMENT
  • 16.3.1 INTRODUCTION
• 16.4 AUTOMATION
  • 16.4.1 INCREASING DEMAND FOR FACTORY AUTOMATION IN SEMICONDUCTOR INDUSTRY TO BOOST DEMAND
• 16.5 CHEMICAL CONTROL
  • 16.5.1 RISING DEMAND FOR HIGH-QUALITY PRODUCTS TO DRIVE MARKET
• 16.6 GAS CONTROL
  • 16.6.1 NECESSITY TO PROVIDE PRECISE CONTROL AND MIXING OF INDUSTRIAL PROCESS GASES TO FUEL MARKET GROWTH
• 16.7 OTHER FAB FACILITY EQUIPMENT

17 APPENDIX

• 17.1 INSIGHTS OF INDUSTRY EXPERTS
• 17.2 DISCUSSION GUIDE
• 17.3 KNOWLEDGESTORE: MARKETSANDMARKETS' SUBSCRIPTION PORTAL
• 17.4 CUSTOMIZATION OPTIONS
• 17.5 RELATED REPORTS
• 17.6 AUTHOR DETAILS