½ÃÀ庸°í¼­
»óǰÄÚµå
1486919

¼¼°èÀÇ ÀûÃþ °¡°ø ½ÃÀå ±Ô¸ð, Á¡À¯À², ¿¹Ãø, Á¦°ø Á¦Ç°, ±â¼ú, ÃÖÁ¾ »ç¿ëÀÚº°, µ¿Ç⠺м® - ¿¹Ãø(-2031³â)

Additive Manufacturing Market Size, Share, Forecast, & Trends Analysis by Offering Technology End User - Global Forecast to 2031

¹ßÇàÀÏ: | ¸®¼­Ä¡»ç: Meticulous Research | ÆäÀÌÁö Á¤º¸: ¿µ¹® 450 Pages | ¹è¼Û¾È³» : Áï½Ã¹è¼Û

    
    
    




¡Ø º» »óǰÀº ¿µ¹® ÀÚ·á·Î Çѱ۰ú ¿µ¹® ¸ñÂ÷¿¡ ºÒÀÏÄ¡ÇÏ´Â ³»¿ëÀÌ ÀÖÀ» °æ¿ì ¿µ¹®À» ¿ì¼±ÇÕ´Ï´Ù. Á¤È®ÇÑ °ËÅ並 À§ÇØ ¿µ¹® ¸ñÂ÷¸¦ Âü°íÇØÁֽñ⠹ٶø´Ï´Ù.

ÀûÃþ °¡°ø ½ÃÀåÀº 2024-2031³â°£ ¿¬Æò±Õ 20.3%ÀÇ ¼ºÀå·üÀ» ±â·ÏÇϸç 2031³â±îÁö 933¾ï 6,000¸¸ ´Þ·¯¿¡ ´ÞÇÒ °ÍÀ¸·Î ¿¹»óµË´Ï´Ù.

ÀÌ º¸°í¼­´Â Á¾ÇÕÀûÀÎ 1Â÷ ¹× 2Â÷ Á¶»ç, ½ÃÀå ½Ã³ª¸®¿À¿¡ ´ëÇÑ ½ÉÃþ ºÐ¼®À» ¹ÙÅÁÀ¸·Î ¾÷°èÀÇ ÁÖ¿ä µ¿ÀÎ, Á¦¾à, µµÀü °úÁ¦ ¹× ±âȸ¸¦ Á¦°øÇÕ´Ï´Ù. º¹ÀâÇÑ ºÎǰ Á¦Á¶, Á¦Á¶ ºñ¿ë Àý°¨, Æó±â¹° ÃÖ¼ÒÈ­, Á¦Ç° °³¹ß ¹× °ø±Þ¸Á °³¼±, ÀûÃþ °¡°øÀ» ÅëÇÑ ¼Õ½¬¿î ¸ÂÃãÈ­ ¹× ´ë·® »ý»ê¿¡ ´ëÇÑ ¼ö¿ä Áõ°¡°¡ ÀÌ ½ÃÀåÀ» ÁÖµµÇϰí ÀÖ½À´Ï´Ù.

¶ÇÇÑ, ±â´É¼º ÃÖÁ¾ »ç¿ë ºÎǰ Á¦Á¶¸¦ À§ÇÑ 3D ÇÁ¸°ÅÍÀÇ »ç¿ë Áõ°¡, º¹ÇÕ 3D ÇÁ¸°ÆÃ, Àç»ýÀÇ·á ºÐ¾ß¿¡¼­ÀÇ 3D ÇÁ¸°ÆÃ »ç¿ë Áõ°¡, Ç×°ø¿ìÁÖ ¹× ±¹¹æ ºÐ¾ß¿¡¼­ÀÇ ÁöÃâ Áõ°¡´Â ÀÌ ½ÃÀå¿¡ Å« ¼ºÀå ±âȸ¸¦ Á¦°øÇÕ´Ï´Ù. ±×·¯³ª Á¶Çü Å©±â¿Í Àç·áÀÇ Á¦¾à, ³ôÀº Àüó¸® ¹× ÈÄó¸® ºñ¿ëÀº ÀÌ ½ÃÀåÀÇ ¼ºÀåÀ» ÀúÇØÇÒ ¼ö ÀÖ½À´Ï´Ù. ¶ÇÇÑ, ÇØÀûÆÇ ¹× ºÒ¹ý º¹Á¦ ¿ì·Á, ¼÷·ÃµÈ Àü¹®°¡ ºÎÁ·, ³ôÀº Ãʱâ ÅõÀÚ ¿ä°Ç, ÀϰüµÈ ǰÁú À¯Áö µîÀº ÀÌ ½ÃÀå¿¡ ÁøÃâÇÏ´Â ±â¾÷µé¿¡°Ô Å« µµÀüÀÌ µÉ ¼ö ÀÖ½À´Ï´Ù.

2024³â¿¡´Â ¼­ºñ½º ºÎ¹®ÀÌ ÀûÃþ °¡°ø ½ÃÀå¿¡¼­ °¡Àå Å« ºñÁßÀ» Â÷ÁöÇÒ °ÍÀ¸·Î ¿¹»óµË´Ï´Ù. ÀÌ ºÎ¹®¿¡´Â ÀûÃþ °¡°ø ¼­ºñ½º, ±³À°, ¼ö¸® ¹× À¯Áöº¸¼ö ¶Ç´Â ÄÁ¼³ÆÃ ¼­ºñ½º, ÀûÃþ °¡°ø Çϵå¿þ¾î ¹× ¼ÒÇÁÆ®¿þ¾î °ü·Ã ±³À° ¼­ºñ½º µîÀÌ Æ÷ÇԵ˴ϴÙ. ÀÌ ºÎ¹® ½ÃÀå Á¡À¯À²ÀÌ Å« ÀÌÀ¯´Â ÀûÃþ °¡°øÀÇ Ã¤ÅÃÀÌ Áõ°¡Çϰí, ÀÌ ºÎ¹®ÀÇ ±â¾÷¿¡ ´ëÇÑ ÀÚ±Ý Áö¿øÀÌ Áõ°¡Çϰí, 3D ÇÁ¸°ÆÃ¿¡ ´ëÇÑ Á¦Á¶¾÷üÀÇ °ü½ÉÀÌ Áõ°¡Çϰí, ºÎ°¡°¡Ä¡ ¼­ºñ½º¸¦ °­È­Çϱâ À§ÇØ ÀûÃþ °¡°øÀ» »ç¿ëÇÏ´Â »ê¾÷ÀÌ È®´ëµÇ°í Àֱ⠶§¹®ÀÔ´Ï´Ù. ºÎ°¡°¡Ä¡ ¼­ºñ½º¸¦ °­È­Çϱâ À§ÇØ ÀûÃþ °¡°øÀ» Ȱ¿ëÇÏ´Â »ê¾÷ÀÌ È®´ëµÇ°í ÀÖ½À´Ï´Ù.

±â¼ú Áß FDM(¿ëÀ¶ ÀûÃþ °¡°ø) ºÎ¹®Àº 2024³â ÀûÃþ °¡°ø ½ÃÀå¿¡¼­ °¡Àå Å« Á¡À¯À²À» Â÷ÁöÇÒ °ÍÀ¸·Î ¿¹»óµÇ¸ç, FDM ½Ã½ºÅÛÀº »ç¿ëÀÚ°¡ ³ëÁñ ¹× Á¶Çü´ë ¿Âµµ, Á¶Çü ¼Óµµ, Ãþ ³ôÀÌ, ³Ã°¢ ÆÒ ¼Óµµ µî ¿©·¯ °øÁ¤ ÆÄ¶ó¹ÌÅ͸¦ Á¶Á¤ÇÒ ¼ö ÀÖ½À´Ï´Ù. Á¶Á¤ÇÒ ¼ö ÀÖ½À´Ï´Ù. ºñ¿ë È¿À²¼º, »ç¿ë ÆíÀǼº, ¿­°¡¼Ò¼º ÇÃ¶ó½ºÆ½ »ç¿ë, ´Ù¸¥ ±â¼ú¿¡ ºñÇØ ÁÖ¿ä ½ÃÀå ÁøÃâ±â¾÷ÀÇ ¼±È£µµ, ÀÌ ±â¼úÀÇ »ç¿ëÀÚ Ä£È­ÀûÀΠƯ¼ºÀÌ ÀÌ ºÎ¹®ÀÇ ¼ºÀåÀ» °¡¼ÓÇÒ °ÍÀ¸·Î ¿¹»óµË´Ï´Ù.

ÃÖÁ¾ »ç¿ëÀÚ Áß ¼ÒºñÀÚ Á¦Ç° ºÎ¹®Àº 2024³â ÀûÃþ °¡°ø ½ÃÀå¿¡¼­ °¡Àå Å« ºñÁßÀ» Â÷ÁöÇÒ °ÍÀ¸·Î ¿¹»óµË´Ï´Ù. ¼ÒºñÀÚ Á¦Ç°¿¡´Â ÆÐ¼Ç, ¾È°æ, ½Å¹ß, °³ÀÎ¿ë ¾×¼¼¼­¸® ºÎ¹®ÀÌ Æ÷ÇԵ˴ϴÙ. ÀÌ·¯ÇÑ Á¦Ç°µéÀº »ó´ëÀûÀ¸·Î Á¦Á¶°¡ ¿ëÀÌÇϱ⠶§¹®¿¡ Á¦Ç° °³¹ß ÁֱⰡ »¡¶óÁý´Ï´Ù. ÀÌ ºÎ¹®ÀÇ °¡Àå Å« Á¡À¯À²Àº ¼ÒºñÀÚ ÀüÀÚ Á¦Ç° »ý»ê Áõ°¡, º¸¼® ¹× °í±Þ Á¦Ç°¿¡ ´ëÇÑ ÁöÃâ Áõ°¡, Àå½Ä¿ë ¿¹¼úǰ¿¡ ´ëÇÑ ¼ö¿ä Áõ°¡¿¡ ±âÀÎÇÕ´Ï´Ù.

ÀûÃþ °¡°ø ½ÃÀåÀÇ Áö¿ªº° ½Ã³ª¸®¿À¿¡ ´ëÇÑ »ó¼¼ÇÑ ºÐ¼®Àº 5°³ ÁÖ¿ä Áö¿ª(ºÏ¹Ì, À¯·´, ¾Æ½Ã¾ÆÅÂÆò¾ç, Áßµ¿ ¹× ¾ÆÇÁ¸®Ä«, ¶óƾ¾Æ¸Þ¸®Ä«)¿¡ ´ëÇÑ »ó¼¼ÇÑ Á¤·®Àû, Á¤¼ºÀû ÅëÂû·Â°ú °¢ Áö¿ªÀÇ ÁÖ¿ä ±¹°¡º° Ä¿¹ö¸®Áö¸¦ Á¦°øÇÕ´Ï´Ù.

2024³â¿¡´Â ºÏ¹Ì°¡ ÀûÃþ °¡°ø ½ÃÀå¿¡¼­ °¡Àå Å« Á¡À¯À²À» Â÷ÁöÇÒ °ÍÀ¸·Î ¿¹»óµÇ¸ç, À¯·´, ¾Æ½Ã¾ÆÅÂÆò¾ç, ¶óƾ¾Æ¸Þ¸®Ä«, Áßµ¿ ¹× ¾ÆÇÁ¸®Ä«°¡ ±× µÚ¸¦ ÀÌÀ» °ÍÀ¸·Î ¿¹»óµË´Ï´Ù. ºÏ¹ÌÀÇ ³ôÀº Á¡À¯À²Àº ÁÖ¿ä ½ÃÀå ÁøÃâ±â¾÷ÀÇ Á¸Àç¿Í ÀÇ·á, °¡Àü, Ç×°ø¿ìÁÖ ¹× ¹æÀ§, ÀÚµ¿Â÷ ºÎ¹®¿¡¼­ÀÇ ¸ÂÃãÇü 3D ÇÁ¸°ÆÃ Á¦Ç°¿¡ ´ëÇÑ ¼ö¿ä Áõ°¡¿¡ ±âÀÎÇÕ´Ï´Ù. ÀÌ Áö¿ªÀº ¶ÇÇÑ »ê¾÷È­ 4.0ÀÇ Ã¤ÅÃ, ÷´Ü 3D ÇÁ¸°ÆÃ ¹× Àç·á °³¹ß¿¡ ´ëÇÑ ±â¾÷ÀÇ Çù·Â°ú ÅõÀÚ Áõ°¡, Á¤ºÎÀÇ Áö¿ø ÀÌ´Ï¼ÅÆ¼ºê¿¡ ÈûÀÔ¾î ¼ºÀåÇϰí ÀÖ½À´Ï´Ù.

Á¶»ç ¹üÀ§:

ÀûÃþ °¡°ø ½ÃÀå Æò°¡ : Á¦Ç°º° Æò°¡

  • Çϵå¿þ¾î
  • ¼ÒÇÁÆ®¿þ¾î
  • Àç·á
    • Æú¸®¸Ó
    • ±Ý¼Ó
    • ¼¼¶ó¹Í
    • º¹ÇÕÀç·á
    • ±âŸ

(¼öÁö, ÇÕ±Ý, »ç¾Ï µî)

  • ¼­ºñ½º

ÀûÃþÁ¦Á¶ ½ÃÀå Æò°¡ : ±â¼úº° Æò°¡

  • ¿ëÀ¶ ÁõÂø ¸ðµ¨¸µ(FDM)
  • ¼±ÅÃÀû ·¹ÀÌÀú ¼Ò°á(SLS)
  • Á÷Á¢ ±Ý¼Ó ·¹ÀÌÀú ¼Ò°á(DMLS)
  • Æú¸®Á¬
  • ½ºÅ×·¹¿À ¸®¼Ò±×·¡ÇÇ(SLA)
  • µðÁöÅÐ ¶óÀÌÆ® ÇÁ·Î¼¼½Ì(DLP)
  • Á÷Á¢ ¿¡³ÊÁö ÁõÂø(DED)
  • ¸ÖƼÁ¦Æ® Ç»Àü
  • ¹ÙÀδõ Á¦Æ®
  • LCD 3D ÇÁ¸°ÆÃ
  • ·¹ÀÌÀú ±Ý¼Ó À¶ÇÕ(LMF)
  • ÀüÀÚºö ¿ëÇØ(EBM)
  • ¼±ÅÃÀû Èí¼ö À¶ÇÕ(SAF)
  • ±âŸ

(±âŸ ±â¼ú·Î´Â CLIP(Continuous Liquid Interface Production), SDL(Selective Deposits Layer), LOM(Laminated Object Manufacturing) µîÀÌ ÀÖ´Ù).

ÀûÃþÁ¦Á¶ ½ÃÀå Æò°¡ : ÃÖÁ¾ »ç¿ëÀÚº° Æò°¡

  • ¼ÒºñÀÚ Á¦Ç°
    • °¡ÀüÁ¦Ç°
    • º¸¼® ¹× °í±Þ Á¦Ç°
    • Àå½Ä ¿¹¼úǰ
    • ºÎǰ ¹× ºñǰ
  • ÀÇ·á
    • Ä¡°ú
    • º¸Ã¶ ÇÁ¸°ÆÃ
    • ½ÃÁ¦Ç° ¹× 3D ¸ðµ¨
    • ±â±¸ Àμâ
    • ¹ÙÀÌ¿À ÇÁ¸°ÆÃ Á¶Á÷ ¹× Àå±â
  • ÀÚµ¿Â÷
    • Ä¿½ºÅÒ ¹× ¿¹ºñ ºÎǰ
    • ÇÁ·ÎÅäŸÀÌÇÎ
    • ¸¶¿îÆ® ¹× ÇȽºÃ³
  • ÀÏ¹Ý Á¦Á¶
    • ±â°è ¹× ¼³ºñ Á¦Á¶
    • ±ÝÇü ¹× °ø±¸ Àμâ
    • ºÎǰ ¹× ½ÃÁ¦Ç° Àμâ
  • ÀüÀÚ ¹× ¹ÝµµÃ¼
    • IC/PCB
    • ÀüÀÚ ºÎǰ
  • Ç×°ø¿ìÁÖ ¹× ¹æÀ§
    • ÇÁ·ÎÅäŸÀÔ ¹× Å×½ºÆ® À¯´Ö
    • º»Ã¼ ¹× ¿¹ºñ ºÎǰ
    • ¹«±â Àμâ
    • ¸¶¿îÆ® ¹× ÇȽºÃ³
  • È­ÇÐÁ¦Ç° ¹× Àç·á
  • ¿¡³ÊÁö/¼®À¯/°¡½º
  • ±âŸ

(±âŸ ÃÖÁ¾ »ç¿ëÀÚ¿¡´Â ½Äǰ, ÆÐ¼Ç ¹× ÀÇ·ù, °ÇÃà, Çмú ¿¬±¸ µîÀÌ Æ÷ÇÔ)

ÀûÃþÁ¦Á¶ ½ÃÀå Æò°¡ : Áö¿ªº° Æò°¡

  • ºÏ¹Ì
    • ¹Ì±¹
    • ij³ª´Ù
  • À¯·´
    • µ¶ÀÏ
    • ¿µ±¹
    • ÇÁ¶û½º
    • ÀÌÅ»¸®¾Æ
    • ½ºÆäÀÎ
    • ³×´ú¶õµå
    • ½ºÀ§½º
    • ½º¿þµ§
    • µ§¸¶Å©
    • ±âŸ À¯·´
  • ¾Æ½Ã¾ÆÅÂÆò¾ç
    • Áß±¹
    • ÀϺ»
    • Àεµ
    • Çѱ¹
    • È£ÁÖ ¹× ´ºÁú·£µå
    • Àεµ³×½Ã¾Æ
    • ű¹
    • º£Æ®³²
    • ¸»·¹À̽þÆ
    • ½Ì°¡Æ÷¸£
    • ±âŸ ¾Æ½Ã¾ÆÅÂÆò¾ç
  • ¶óƾ¾Æ¸Þ¸®Ä«
    • ºê¶óÁú
    • ¸ß½ÃÄÚ
    • ±âŸ ¶óƾ¾Æ¸Þ¸®Ä«
  • Áßµ¿ ¹× ¾ÆÇÁ¸®Ä«
    • ¾Æ¶ø¿¡¹Ì¸®Æ®(UAE)
    • À̽º¶ó¿¤
    • ±âŸ Áßµ¿ ¹× ¾ÆÇÁ¸®Ä«

¸ñÂ÷

Á¦1Àå ¼­·Ð

Á¦2Àå Á¶»ç ¹æ¹ý

Á¦3Àå ÁÖ¿ä ¿ä¾à

Á¦4Àå ½ÃÀå ÀλçÀÌÆ®

  • ½ÃÀå
  • °³¿ä
  • ½ÃÀå ¼ºÀå¿¡ ´ëÇÑ ¿µÇâ¿äÀÎ
    • ½ÃÀå ¿ªÇÐÀÇ ¿µÇ⠺м®
    • ¿äÀÎ ºÐ¼®
  • µ¿Çâ
  • »ç·Ê ¿¬±¸
    • ÀÚµ¿Â÷ »ê¾÷¿¡¼­ÀÇ ÀûÃþ °¡°ø
    • ÀÚµ¿Â÷ Á¦Á¶¿¡¼­ÀÇ ÀûÃþ °¡°ø
    • µðÁöÅÐ Á¦Á¶¿¡¼­ÀÇ ÀûÃþ °¡°ø
  • ¹ë·ùüÀÎ ºÐ¼®
  • PorterÀÇ Five Forces ºÐ¼®

Á¦5Àå ÀûÃþ °¡°ø ½ÃÀå Æò°¡ : Á¦°ø Á¦Ç°º°

  • °³¿ä
  • ¼­ºñ½º
  • Çϵå¿þ¾î
  • Àç·á
    • Æú¸®¸Ó
    • ±Ý¼Ó
    • ¼¼¶ó¹Í
    • º¹ÇÕÀç·á
    • ±âŸ
  • ¼ÒÇÁÆ®¿þ¾î

Á¦6Àå ÀûÃþ °¡°ø ½ÃÀå Æò°¡ : ±â¼úº°

  • °³¿ä
  • ¿ëÀ¶ ÁõÂø ¸ðµ¨¸µ(FDM)
  • ¼±ÅÃÀû ·¹ÀÌÀú ¼Ò°á(SLS)
  • Á÷Á¢ ±Ý¼Ó ·¹ÀÌÀú ¼Ò°á(DMLS)
  • Æú¸®Á¬
  • ½ºÅ×·¹¿À ¸®¼Ò±×·¡ÇÇ(SLA)
  • µðÁöÅÐ ¶óÀÌÆ® ÇÁ·Î¼¼½Ì(DLP)
  • Á÷Á¢ ¿¡³ÊÁö ÁõÂø(DED)
  • ¸ÖƼÁ¦Æ® Ç»Àü
  • ¹ÙÀδõ Á¦Æ®
  • LCD 3D ÇÁ¸°ÆÃ
  • ·¹ÀÌÀú ±Ý¼Ó À¶ÇÕ(LMF)
  • ÀüÀÚºö ¿ëÇØ(EBM)
  • ¼±ÅÃÀû Èí¼ö À¶ÇÕ(SAF)
  • ±âŸ

Á¦7Àå ÀûÃþ °¡°ø ½ÃÀå Æò°¡ : ÃÖÁ¾»ç¿ëÀÚº°

  • °³¿ä
  • ¼ÒºñÀÚ Á¦Ç°
    • °¡ÀüÁ¦Ç°
    • º¸¼® ¹× °í±Þ Á¦Ç°
    • Àå½Ä ¿¹¼úǰ
    • ºÎǰ ¹× ºñǰ
  • ÀÇ·á
    • Ä¡°ú
    • º¸Ã¶ ÇÁ¸°ÆÃ
    • ½ÃÁ¦Ç° ¹× 3D ¸ðµ¨
    • ±â±¸ Àμâ
    • ¹ÙÀÌ¿À ÇÁ¸°ÆÃ Á¶Á÷ ¹× Àå±â
  • ÀÚµ¿Â÷
    • Ä¿½ºÅÒ ¹× ¿¹ºñ ºÎǰ
    • ÇÁ·ÎÅäŸÀÌÇÎ
    • ¸¶¿îÆ® ¹× ÇȽºÃ³
  • ÀÏ¹Ý Á¦Á¶
    • ±â°è ¹× ¼³ºñ Á¦Á¶
    • ±ÝÇü ¹× °ø±¸ Àμâ
    • ºÎǰ ¹× ½ÃÁ¦Ç° Àμâ
  • ÀüÀÚ ¹× ¹ÝµµÃ¼
    • IC/PCB
    • ÀüÀÚ ºÎǰ
  • Ç×°ø¿ìÁÖ ¹× ¹æÀ§
    • ÇÁ·ÎÅäŸÀÔ ¹× Å×½ºÆ® À¯´Ö
    • º»Ã¼ ¹× ¿¹ºñ ºÎǰ
    • ¹«±â Àμâ
    • ¸¶¿îÆ® ¹× ÇȽºÃ³
  • È­ÇÐÁ¦Ç° ¹× Àç·á
  • ¿¡³ÊÁö/¼®À¯/°¡½º
  • ±âŸ

Á¦8Àå ÀûÃþ °¡°ø ½ÃÀå Æò°¡ : Áö¿ªº°

  • °³¿ä
  • ºÏ¹Ì
    • ¹Ì±¹
    • ij³ª´Ù
  • À¯·´
    • µ¶ÀÏ
    • ÀÌÅ»¸®¾Æ
    • ¿µ±¹
    • ÇÁ¶û½º
    • ½ºÆäÀÎ
    • ½º¿þµ§
    • ³×´ú¶õµå
    • ½ºÀ§½º
    • µ§¸¶Å©
    • ±âŸ À¯·´
  • ¾Æ½Ã¾ÆÅÂÆò¾ç
    • Áß±¹
    • ÀϺ»
    • Àεµ
    • Çѱ¹
    • È£ÁÖ ¹× ´ºÁú·£µå
    • Àεµ³×½Ã¾Æ
    • ű¹
    • ¸»·¹À̽þÆ
    • ½Ì°¡Æ÷¸£
    • º£Æ®³²
    • ±âŸ ¾Æ½Ã¾ÆÅÂÆò¾ç
  • Áßµ¿ ¹× ¾ÆÇÁ¸®Ä«
    • ¾Æ¶ø¿¡¹Ì¸®Æ®(UAE)
    • À̽º¶ó¿¤
    • ±âŸ Áßµ¿ ¹× ¾ÆÇÁ¸®Ä«
  • ¶óƾ¾Æ¸Þ¸®Ä«
    • ¸ß½ÃÄÚ
    • ºê¶óÁú
    • ±âŸ ¶óƾ¾Æ¸Þ¸®Ä«

Á¦9Àå °æÀï ºÐ¼®

  • °³¿ä
  • ÁÖ¿ä ¼ºÀå Àü·«
  • °æÀï º¥Ä¡¸¶Å·
  • °æÀï ´ë½Ãº¸µå
    • ¾÷°è ¸®´õ
    • ½ÃÀå Â÷º°È­ ¿äÀÎ
    • ¼±Çà ±â¾÷
    • ½Å±Ô ±â¾÷
  • ½ÃÀå Á¡À¯À² ºÐ¼®(2023³â)
    • Stratasys, Ltd.(¹Ì±¹)
    • 3D Systems Corporation(¹Ì±¹)
    • EOS GmbH(µ¶ÀÏ)

Á¦10Àå ±â¾÷ °³¿ä(±â¾÷ °³¿ä, À繫 °³¿ä, Á¦Ç° Æ÷Æ®Æú¸®¿À, Àü·«Àû Àü°³)

  • Stratasys, Ltd.
  • 3D Systems Corporation
  • EOS GmbH
  • Colibrium Additive(General Electric Company ÀÚȸ»ç)
  • Materialise NV
  • Desktop Metal, Inc.
  • voxeljet AG
  • Optomec, Inc.
  • Proto Labs, Inc.
  • Autodesk, Inc.
  • 3Dceram
  • Dassault Systemes SE
  • Formlabs Inc.
  • Shapeways Holdings, Inc.
  • Canon Inc.

(ÁÖ : ÁÖ¿ä 5°³»çÀÇ SWOT ºÐ¼®À» °ÔÀç)

Á¦11Àå ºÎ·Ï

LSH 24.06.05

Additive Manufacturing Market Size, Share, Forecast, & Trends Analysis by Offering (Hardware, Materials, Services) Technology (FDM, DMLS, SLA, SLS, Polyjet, DED) End User (Consumer, Electronics, Healthcare, Automotive, Aerospace) - Global Forecast to 2031

The additive manufacturing market is projected to reach $93.36 billion by 2031, at a CAGR of 20.3% from 2024 to 2031.

Following a comprehensive primary and secondary study and an in-depth analysis of the market scenario, this report provides the key drivers, constraints, challenges, and opportunities of the industry. This market is driven by the rising need to produce complex parts, reduce manufacturing expenses, and minimize waste, improvements in product development and supply chains, and easy customization and bulk production using additive manufacturing.

Furthermore, the growing use of 3D printers to produce functional end-use parts, composite 3D printing, increasing use of 3D printing in regenerative medicine, and increasing spending in aerospace & defense provide a significant growth opportunity for this market. However, the restricted build size & material constraints and high pre-processing and post-processing costs may restrain the growth of this market. Additionally, concerns about piracy & unauthorized distribution, scarcity of skilled professionals, high initial investment requirements, and maintaining consistent quality pose a major challenge for the players operating in this market.

Among offerings, in 2024, the services segment is expected to account for the largest share of the additive manufacturing market. Some of the services included in the segment are additive manufacturing services, education, repair & maintenance or consulting services, and training services associated with additive manufacturing hardware and software. The large market share of this segment is attributed to the growing adoption of additive manufacturing, increased funding for companies in this sector, heightened interest from manufacturers in 3D printing, and the expanding number of industries utilizing additive manufacturing to enhance value-added services.

Among technologies, in 2024, the fused deposition modeling (FDM) segment is expected to account for the largest share of the additive manufacturing market. FDM systems allow users to adjust several process parameters, such as nozzle and build platform temperatures, build speed, layer height, and cooling fan speed. The cost efficiency, ease of utilization, use of thermoplastics, preference of major market players as compared to other technologies, and the user-friendly nature of this technology are expected to boost the growth of this segment.

Among end users, in 2024, the consumer products segment is expected to account for the largest share of the additive manufacturing market. Consumer products include categories from the fashion, eyewear, footwear, and personalized accessories sectors. These products are relatively easy to manufacture and, therefore, accelerate product development cycles. The largest share of the segment is attributed to the increasing production of consumer electronics, increasing spending on jewelry & luxury goods, and rising demand for decorative art.

An in-depth analysis of the geographical scenario of the additive manufacturing market provides detailed qualitative and quantitative insights for the five major geographies (North America, Europe, Asia-Pacific, the Middle East & Africa, and Latin America) along with the coverage of major countries in each region.

In 2024, North America is expected to account for the largest share of the additive manufacturing market, followed by Europe, Asia-Pacific, Latin America, and the Middle East & Africa. The large share of North America is attributed to factors such as the presence of key market players and the growing demand for customized 3D-printed products in the region across healthcare, consumer electronics, aerospace & defense, and automotive sectors. The region is also growing in its adoption of industrialization 4.0, increasing collaborations & investments by enterprises in the development of advanced 3D printing and its materials, and supportive government initiatives.

The key players operating in the additive manufacturing market are 3D Systems Corporation (U.S.), 3DCeram (France), Arcam AB (Sweden), Autodesk, Inc. (U.S.), Canon Inc. (Japan), Dassault Systemes SE (France), Stratasys, Ltd. (U.S.), voxeljet AG (Germany), ExOne Operating, LLC (U.S.), MakerBot Industries, LLC (U.S.), Materialise NV (Belgium), EOS GmbH (Germany), Optomec, Inc., (U.S.), Proto Labs, Inc. (U.S.), Shapeways Holdings, Inc. (U.S.).

Scope of the Report:

Additive Manufacturing Market Assessment-by Offering

  • Hardware
  • Software
  • Materials
    • Polymers
    • Metals
    • Ceramics
    • Composites
    • Other Materials

(Other materials include resins, alloys, and sandstone)

  • Services

Additive Manufacturing Market Assessment-by Technology

  • Fused Deposition Modeling (FDM)
  • Selective Laser Sintering (SLS)
  • Direct Metal Laser Sintering (DMLS)
  • PolyJet
  • Stereolithography (SLA)
  • Digital Light Processing (DLP)
  • Directed Energy Deposition (DED)
  • Multi Jet Fusion
  • Binder Jetting
  • LCD 3D Printing
  • Laser Metal Fusion (LMF)
  • Electron Beam Melting (EBM)
  • Selective Absorption Fusion (SAF)
  • Other Technologies

(Other technologies include Continuous Liquid Interface Production (CLIP), Selective Deposits Layer (SDL), and Laminated Object Manufacturing (LOM).

Additive Manufacturing Market Assessment-by End User

  • Consumer Products
    • Consumer Electronics
    • Jewelry & Luxury Goods
    • Decorative Art
    • Parts & Fixtures
  • Healthcare
    • Dental
    • Prosthetic Printing
    • Prototype and 3D Models
    • Instrument Printing
    • Bioprinting Tissues and Organs
  • Automotive
    • Custom & Spare Parts
    • Prototyping
    • Mounts & Fixtures
  • General Manufacturing
    • Machinery & Equipment Manufacturing
    • Molds and Tools Printing
    • Parts & Prototype Printing
  • Electronics & Semiconductors
    • IC & PCB
    • Electronic Components
  • Aerospace & Defense
    • Prototype & Test Units
    • Body & Spare Parts
    • Weapon Printing
    • Mounts & Fixtures
  • Chemicals & Materials
  • Energyand Oil & Gas
  • Other End Users

(Other end users include food, fashion and clothing, architecture, and academic research)

Additive Manufacturing Market Assessment-by Geography

  • North America
    • U.S.
    • Canada
  • Europe
    • Germany
    • U.K.
    • France
    • Italy
    • Spain
    • Netherlands
    • Switzerland
    • Sweden
    • Denmark
    • Rest of Europe (RoE)
  • Asia-Pacific (APAC)
    • China
    • Japan
    • India
    • South Korea
    • Australia & New Zealand
    • Indonesia
    • Thailand
    • Vietnam
    • Malaysia
    • Singapore
    • Rest of APAC (RoAPAC)
  • Latin America
    • Brazil
    • Mexico
    • Rest of Latin America (RoLATM)
  • Middle East & Africa
    • UAE
    • Israel
    • Rest of Middle East & Africa

TABLE OF CONTENTS

1. Introduction

  • 1.1. Market Definition & Scope
  • 1.2. Market Ecosystem
  • 1.3. Currency & Limitations
  • 1.4. Key Stakeholders

2. Research Methodology

  • 2.1. Research Approach
  • 2.2. Process Of Data Collection and Validation
    • 2.2.1. Secondary Research
    • 2.2.2. Primary Research/Interviews with Key Opinion Leaders of the Industry
  • 2.3. Market Sizing and Forecasting
    • 2.3.1. Market Size Estimation Approach
    • 2.3.2. Growth Forecast Approach
    • 2.3.3. Market Share Analysis
  • 2.4. Assumptions for the Study

3. Executive Summary

4. Market Insights

  • 4.1. Overview
  • 4.2. Factors Affecting Market Growth
    • 4.2.1. Impact Analysis of Market Dynamics
      • 4.2.1.1. Ease of Customization & Bulk Production with Additive Manufacturing Driving Market Growth
      • 4.2.1.2. Restricted Build Sizes & Material Constraints Limiting the Adoption of Additive Manufacturing
      • 4.2.1.3. Growing Use of 3D Printers to Produce Functional End-use Parts Generating Growth Opportunities for Market Players
      • 4.2.1.4. Concerns About Piracy & Unauthorized Distribution Expected to Remain a Major Challenge Impacting Market Growth
    • 4.2.2. Factor Analysis
  • 4.3. Trends
    • 4.3.1. Use of Artificial Intelligence (AI) in 3D Printing
    • 4.3.2. On-Demand Spare Products Production
    • 4.3.3. Increased Product Customization
  • 4.4. Case Studies
    • 4.4.1. Additive Manufacturing in the Automotive Industry
    • 4.4.2. Additive Manufacturing in Motor Vehicle Manufacturing
    • 4.4.3. Additive Manufacturing in Digital Manufacturing
  • 4.5. Value Chain Analysis
  • 4.6. Porter's Five Forces Analysis
    • 4.6.1. Bargaining Power of Suppliers
    • 4.6.2. Bargaining Power of Buyers
    • 4.6.3. Threat of Substitutes
    • 4.6.4. Threat of New Entrants
    • 4.6.5. Degree of Competition

5. Additive Manufacturing Market Assessment-by Offering

  • 5.1. Overview
  • 5.2. Services
  • 5.3. Hardware
  • 5.4. Materials
    • 5.4.1. Polymers
    • 5.4.2. Metals
    • 5.4.3. Ceramics
    • 5.4.4. Composites
    • 5.4.5. Other Materials
  • 5.5. Software

6. Additive Manufacturing Market Assessment-by Technology

  • 6.1. Overview
  • 6.2. Fused Deposition Modeling (FDM)
  • 6.3. Selective Laser Sintering (SLS)
  • 6.4. Direct Metal Laser Sintering (DMLS)
  • 6.5. PolyJet
  • 6.6. Stereolithography (SLA)
  • 6.7. Digital Light Processing (DLP)
  • 6.8. Directed Energy Deposition (DED)
  • 6.9. Multi Jet Fusion
  • 6.10. Binder Jetting
  • 6.11. LCD 3D Printing
  • 6.12. Laser Metal Fusion (LMF)
  • 6.13. Electron Beam Melting (EBM)
  • 6.14. Selective Absorption Fusion (SAF)
  • 6.15. Other Technologies

7. Additive Manufacturing Market Assessment-by End User

  • 7.1. Overview
  • 7.2. Consumer Products
    • 7.2.1. Consumer Electronics
    • 7.2.2. Jewelry & Luxury Goods
    • 7.2.3. Decorative Art
    • 7.2.4. Parts & Fixtures
  • 7.3. Healthcare
    • 7.3.1. Dental
    • 7.3.2. Prosthetic Printing
    • 7.3.3. Prototype and 3D Models
    • 7.3.4. Instrument Printing
    • 7.3.5. Bioprinting Tissues and Organs
  • 7.4. Automotive
    • 7.4.1. Custom & Spare Parts
    • 7.4.2. Prototyping
    • 7.4.3. Mounts & Fixtures
  • 7.5. General Manufacturing
    • 7.5.1. Machinery & Equipment Manufacturing
    • 7.5.2. Molds & Tools Printing
    • 7.5.3. Parts & Prototype Printing
  • 7.6. Electronics & Semiconductors
    • 7.6.1. IC & PCB
    • 7.6.2. Electronic Components
  • 7.7. Aerospace & Defense
    • 7.7.1. Prototype & Test Units
    • 7.7.2. Body & Spare Parts
    • 7.7.3. Weapon Printing
    • 7.7.4. Mounts & Fixtures
  • 7.8. Chemicals & Materials
  • 7.9. Energy and Oil & Gas
  • 7.10. Other End Users

8. Additive Manufacturing Market Assessment-by Geography

  • 8.1. Overview
  • 8.2. North America
    • 8.2.1. U.S.
    • 8.2.2. Canada
  • 8.3. Europe
    • 8.3.1. Germany
    • 8.3.2. Italy
    • 8.3.3. U.K.
    • 8.3.4. France
    • 8.3.5. Spain
    • 8.3.6. Sweden
    • 8.3.7. Netherlands
    • 8.3.8. Switzerland
    • 8.3.9. Denmark
    • 8.3.10. Rest of Europe
  • 8.4. Asia-Pacific
    • 8.4.1. China
    • 8.4.2. Japan
    • 8.4.3. India
    • 8.4.4. South Korea
    • 8.4.5. Australia & New Zealand
    • 8.4.6. Indonesia
    • 8.4.7. Thailand
    • 8.4.8. Malaysia
    • 8.4.9. Singapore
    • 8.4.10. Vietnam
    • 8.4.11. Rest Of Asia-Pacific
  • 8.5. Middle East & Africa
    • 8.5.1. UAE
    • 8.5.2. Israel
    • 8.5.3. Rest of the Middle East & Africa
  • 8.6. Latin America
    • 8.6.1. Mexico
    • 8.6.2. Brazil
    • 8.6.3. Rest of Latin America

9. Competition Analysis

  • 9.1. Overview
  • 9.2. Key Growth Strategies
  • 9.3. Competitive Benchmarking
  • 9.4. Competitive Dashboard
    • 9.4.1. industry Leaders
    • 9.4.2. Market Differentiators
    • 9.4.3. Vanguards
    • 9.4.4. Emerging Companies
  • 9.5. Market Share Analysis (2023)
    • 9.5.1. Stratasys, Ltd. (U.S.)
    • 9.5.2. 3D Systems Corporation (U.S.)
    • 9.5.3. EOS GmbH (Germany)

10. Company Profiles (Company Overview, Financial Overview, Product Portfolio, and Strategic Developments)

  • 10.1. Stratasys, Ltd.
  • 10.2. 3D Systems Corporation
  • 10.3. EOS GmbH
  • 10.4. Colibrium Additive (Subsidiary of General Electric Company)
  • 10.5. Materialise NV
  • 10.6. Desktop Metal, Inc.
  • 10.7. voxeljet AG
  • 10.8. Optomec, Inc.
  • 10.9. Proto Labs, Inc.
  • 10.10. Autodesk, Inc.
  • 10.11. 3Dceram
  • 10.12. Dassault Systemes SE
  • 10.13. Formlabs Inc.
  • 10.14. Shapeways Holdings, Inc.
  • 10.15. Canon Inc.

(Note: SWOT Analysis of the top 5 companies will be provided.)

11. Appendix

  • 11.1. Available Customization
  • 11.2. Related Reports
»ùÇà ¿äû ¸ñ·Ï
0 °ÇÀÇ »óǰÀ» ¼±Åà Áß
¸ñ·Ï º¸±â
Àüü»èÁ¦