타이어 마모 저감용 화합물 첨가제 : 시장 점유율 분석, 업계 동향 및 통계, 성장 예측(2026-2031년)

According to Mordor Intelligence, the tire-abrasion reduction compound additives market size was valued at USD 2.93 billion in 2025 and is estimated to grow from USD 3.10 billion in 2026 to reach USD 4.17 billion by 2031, at a CAGR of 6.07% during the forecast period (2026-2031).

This report is Segmented by Additive Type (Silica Additives and More), Tire Type (Passenger Car Tires and More), Compound Application (Tread Compounds and More), End-User Industry (OEM Tire Manufacturing and More), and Geography (Asia-Pacific, North America, Europe, South America, and Middle-East and Africa). The Market Forecasts are Provided in Terms of Value (USD).

Global Tire-Abrasion Reduction Compound Additives Market Trends and Insights

Regulatory Push for Tire Abrasion and Non-Exhaust Emission Reduction

Euro 7 is reshaping additive procurement across European tire supply chains in 2026. Regulation (EU) 2024/1257 extends vehicle requirements to tire abrasion and applies to new M1 and N1 vehicle types from November 29, 2026. Limits for C1 passenger-car tires are scheduled to take effect from July 2028, followed by C2 tires in April 2030 and C3 tires in April 2032 under the United Nations Economic Commission for Europe (UNECE) framework. Tire producers, therefore, need tread formulations that reduce abrasive mass loss without sacrificing wet grip or fuel efficiency. This places greater importance on silica-rich compounds and coupling agents that improve the interaction between rubber and filler. The Allgemeiner Deutscher Automobil-Club (ADAC) added a tire-wear assessment to its revised Green New Car Assessment Program (NCAP) protocol in 2025, increasing commercial pressure before the formal limits begin to apply. The tire-abrasion reduction compound additives market is also affected by UN R117 labeling requirements, where rolling resistance and wet-grip performance support the use of highly dispersible silica systems.

Electrification-Driven Demand for High-Durability Electric Vehicle (EV) Tires

Battery electric vehicles are making tire wear a more important engineering requirement for tire makers. Electric vehicles wear tires 20-30% faster than comparable internal-combustion vehicles because of instant torque, less coasting, and added battery weight. Battery electric trucks present an even greater challenge, as their traction-force contribution to tire wear is more than 120% higher than that of their diesel counterparts. Pirelli reported that 60% of its nearly 200 new Original Equipment Manufacturer (OEM) homologations in the first half of 2026 were for battery-electric or plug-in-hybrid vehicles. The company also reported that 90% of those homologations covered rim diameters of at least 19 inches, which require demanding tread designs. The tire-abrasion reduction compound additives market benefits as tire manufacturers evaluate silica, functionalized polymers, and coupling agents for electric-vehicle programs. These evaluations can lead to longer-term supply relationships once a formulation is approved for production.

High Cost and Energy Intensity of Advanced Additives

The higher cost of highly dispersible precipitated silica continues to limit its use in price-sensitive tire applications. Advanced silica-silane systems carry a 40-60% cost premium over conventional carbon black grades. Silane production requires halogenated precursor chemistry and multiple reaction stages, which limit rapid cost reduction. Highly filled silica compounds also require more intensive mixing to achieve adequate dispersion, adding to energy consumption and productivity pressure for tire manufacturers. Orion cited pressure on Western tire OEM output from Asian tire imports in its 2026 guidance, a condition that tends to make material-cost decisions more conservative. In October 2025, Cabot expanded North American production of its EVOLVE circular-reinforcing carbon platform, which offers N234 performance with 30% recycled carbon black content . These alternatives can narrow the cost and sustainability advantage of silica systems in commercial and industrial tire applications.

Other drivers and restraints analyzed in the detailed report include:

1. Adoption of Silica-Silane Reinforcement Systems
2. Premiumization of High-Performance and Long-Life Tires
3. Substitution by Carbon Black and Conventional Rubber Chemicals

For complete list of drivers and restraints, kindly check the Table Of Contents.

Segment Analysis

Silica additives captured 41.62% of the tire-abrasion reduction compound additives market share in 2025. Their position reflects the performance of highly dispersible precipitated silica in passenger-car treads and electric-vehicle tire programs. Continental's three-decade experience has shown that silica compounds deliver nearly 50% shorter braking distances and improved rolling resistance compared with older carbon black approaches. Functionalized polymers are projected to grow at a 7.13% CAGR through 2031, making them the fastest-growing additive type. Their amine and alkoxysilyl groups enhance interactions between rubber chains and silica surfaces, supporting higher silica loading while reducing filler-filler interactions that can compromise compound properties.

Coupling agents remain necessary because they help transfer the reinforcing benefit of silica into the rubber network. Momentive presented NXT and NRX silane platforms at Tire Technology Expo 2026 for reinforcement at lower mixing temperatures and for heavy-duty natural-rubber applications. Processing aids, reinforcing resins, nanomaterials, and anti-wear additives represent smaller-value categories but play an important supporting role. LANXESS introduced Aflux SD for silica dispersion, while Arkema launched Luperox NeatCure granules in October 2025 to enable safer, more efficient curing. The tire-abrasion reduction compound additives market is also moving away from certain incumbent accelerators due to toxicological concerns, increasing the value of bio-based dispersants, alternative accelerators, and specialty coupling agents in new formulations.

Passenger-car tires held 56.84% of the tire-abrasion reduction compound additives market share in 2025. This segment combines high tire production numbers with the widespread use of silica-silane compounds in premium and mainstream radial tires. Passenger electric vehicles raise the additive intensity of tread compounds because added mass and torque increase wear requirements. Commercial-vehicle tires are projected to grow at a CAGR of 6.91% through 2031. Battery electric trucks require more abrasion-resistant compounds because their axle loads and torque profiles are more demanding than those of diesel vehicles. The tire-abrasion reduction compound additives market, therefore, has a path to growth in truck and bus radial applications as electric truck fleets expand.

Off-the-road tires constitute a distinct technical niche that employs nano-carbon-reinforced resins and specialty anti-wear additives for mining and construction operations. Their lower output keeps them a smaller segment, but extended wear life remains important for equipment operators. Two-wheeler and three-wheeler tires are concentrated in India and Southeast Asia and have historically used carbon black-heavy formulations. Premium tire producers are beginning to test silica-based tread compounds in this category, creating a longer-term upgrade path. OEM specifications for electric commercial vehicles are also likely to influence the replacement channel over time, as replacement compounders may need to adopt similar formulations to maintain wear, grip, and rolling resistance performance. This pull-through supports demand for functionalized polymers, coupling agents, and processing aids in commercial tire compounds.

Complete Report Scope:

• By Additive Type
  • Silica Additives
  • Functionalized Polymers
  • Coupling Agents
  • Processing Aids
  • Others (Nanomaterials, Reinforcing Resins, Anti-Wear Additives, Specialty Additives)
• By Tire Type
  • Passenger Car Tires
  • Commercial Vehicle Tires
  • Off-the-Road Tires
  • Two- and Three-Wheeler Tires
  • Others
• By Compound Application
  • Tread Compounds
  • Sidewall Compounds
  • Inner Liner Compounds
  • Belt and Carcass Compounds
  • Others (Bead Compounds)
• By End-User Industry
  • OEM Tire Manufacturing
  • Replacement Tire Market
  • Retread and Repair Applications
  • Others
• By Geography
  • Asia-Pacific
    • China
    • India
    • Japan
    • South Korea
    • Rest of Asia-Pacific
  • North America
    • United States
    • Canada
    • Mexico
  • Europe
    • Germany
    • United Kingdom
    • France
    • Italy
    • Rest of Europe
  • South America
    • Brazil
    • Argentina
    • Rest of South America
  • Middle-East and Africa
    • Saudi Arabia
    • South Africa
    • Rest of Middle-East and Africa

Geography Analysis

Asia-Pacific held 49.46% of the tire-abrasion reduction compound additives market share in 2025 and is projected to grow at a CAGR of 6.97% through 2031. China is the region's primary production base, with annual output exceeding 1.6 billion tires in the study period. China's tire market was valued at USD 54.65 billion in 2025, and its GB-9743 and GB-9744 standards are supporting upgrades toward silica-based tread compounds. India is another significant demand center, as premium domestic tire producers are testing silica-based specifications for 2- and 3-wheeler tires. Japan and South Korea are early adopters of digital compound development. Sumitomo Rubber reported that its AI-based material discovery work with NEC reduced the time to propose compounds by 95% compared with conventional expert-led approaches.

Europe is the second-largest region in the tire-abrasion-reduction compound-additive market. Germany's concentration of premium tire producers and specialty chemical suppliers supports the adoption of silica-intensive systems. Euro 7, REACH, the Ecodesign for Sustainable Products Regulation (ESPR), and UN R117 are increasing the importance of documented material performance and carbon intensity. Solvay opened Europe's first bio-circular silica facility in Livorno, Italy, using rice husk ash and reporting a 35% per-ton CO2 reduction. Evonik is expanding International Sustainability and Carbon Certification (ISCC) Plus-certified ULTRASIL eCO circular silica production at its site in Turkey in 2026. North America has a distinct profile, with electric vehicle platform launches increasing original equipment manufacturer (OEM) specification requirements while imports pressured Western tire output in 2025.

South America and the Middle-East & Africa accounted for the smallest regional shares in the study period. Brazil is the main South American demand center, as local producers are beginning to use highly dispersible silica in passenger-car treads. Consumer and fleet demand for fuel-efficient tires is supporting this transition. The Middle-East & Africa are mainly served through specialty additive imports. Saudi Arabia's manufacturing diversification efforts and South Africa's industrial rubber base are creating emerging demand for coupling agents and processing aids. Argentina's chemical sector and regional bio-based feedstocks provide additional support across the rest of South America. Infrastructure-related off-the-road tire demand remains significant in the Middle-East & Africa, where conventional carbon-black-based compounds continue to dominate.

1. Arkema
2. BASF
3. Birla Carbon
4. Cabot Corporation
5. Eastman Chemical Company
6. Evonik Industries AG
7. J.M. Huber Corporation
8. LANXESS
9. Madhu Silica Pvt. Ltd.
10. Orion Engineered Carbons GmbH
11. QEMETICA
12. QUECHEN
13. Shin-Etsu Chemical Co., Ltd.
14. Solvay
15. Sumitomo Chemical Co., Ltd.
16. Tokuyama Corporation
17. Tosoh Corporation
18. Wacker Chemie AG

Additional Benefits:

• The market estimate (ME) sheet in Excel format
• 3 months of analyst support

TABLE OF CONTENTS

1 Introduction

• 1.1 Study Assumptions and Market Definition
• 1.2 Scope of the Study

2 Research Methodology

3 Executive Summary

4 Market Landscape

• 4.1 Market Overview
• 4.2 Market Drivers
  • 4.2.1 Regulatory Push for Tire-Abrasion and Non-Exhaust Emission Reduction
  • 4.2.2 Electrification-Driven Demand for High-Durability EV Tires
  • 4.2.3 Adoption of Silica-Silane Reinforcement Systems
  • 4.2.4 Premiumization of High-Performance and Long-Life Tires
  • 4.2.5 Formulation Digitization and Faster Compound Optimization
  • 4.2.6 Circular and Bio-Based Additive Development
• 4.3 Market Restraints
  • 4.3.1 High Cost and Energy Intensity of Advanced Additives
  • 4.3.2 Substitution by Carbon Black and Conventional Rubber Chemicals
  • 4.3.3 Long OEM Qualification and Reformulation Cycles
  • 4.3.4 Variability of Bio-Based Feedstocks and Recycled Inputs
• 4.4 Value Chain Analysis
• 4.5 Porter's Five Forces Analysis
  • 4.5.1 Threat of New Entrants
  • 4.5.2 Bargaining Power of Suppliers
  • 4.5.3 Bargaining Power of Buyers
  • 4.5.4 Threat of Substitutes
  • 4.5.5 Competitive Rivalry

5 Market Size and Growth Forecasts (Value)

• 5.1 By Additive Type
  • 5.1.1 Silica Additives
  • 5.1.2 Functionalized Polymers
  • 5.1.3 Coupling Agents
  • 5.1.4 Processing Aids
  • 5.1.5 Others (Nanomaterials, Reinforcing Resins, Anti-Wear Additives, Specialty Additives)
• 5.2 By Tire Type
  • 5.2.1 Passenger Car Tires
  • 5.2.2 Commercial Vehicle Tires
  • 5.2.3 Off-the-Road Tires
  • 5.2.4 Two- and Three-Wheeler Tires
  • 5.2.5 Others
• 5.3 By Compound Application
  • 5.3.1 Tread Compounds
  • 5.3.2 Sidewall Compounds
  • 5.3.3 Inner Liner Compounds
  • 5.3.4 Belt and Carcass Compounds
  • 5.3.5 Others (Bead Compounds)
• 5.4 By End-User Industry
  • 5.4.1 OEM Tire Manufacturing
  • 5.4.2 Replacement Tire Market
  • 5.4.3 Retread and Repair Applications
  • 5.4.4 Others
• 5.5 By Geography
  • 5.5.1 Asia-Pacific
    • 5.5.1.1 China
    • 5.5.1.2 India
    • 5.5.1.3 Japan
    • 5.5.1.4 South Korea
    • 5.5.1.5 Rest of Asia-Pacific
  • 5.5.2 North America
    • 5.5.2.1 United States
    • 5.5.2.2 Canada
    • 5.5.2.3 Mexico
  • 5.5.3 Europe
    • 5.5.3.1 Germany
    • 5.5.3.2 United Kingdom
    • 5.5.3.3 France
    • 5.5.3.4 Italy
    • 5.5.3.5 Rest of Europe
  • 5.5.4 South America
    • 5.5.4.1 Brazil
    • 5.5.4.2 Argentina
    • 5.5.4.3 Rest of South America
  • 5.5.5 Middle-East and Africa
    • 5.5.5.1 Saudi Arabia
    • 5.5.5.2 South Africa
    • 5.5.5.3 Rest of Middle-East and Africa

6 Competitive Landscape

• 6.1 Market Concentration
• 6.2 Strategic Moves
• 6.3 Market Share (%)/Ranking Analysis
• 6.4 Company Profiles (includes Global Overview, Market Overview, Core Segments, Financials as available, Strategic Information, Products and Services, and Recent Developments)
  • 6.4.1 Arkema
  • 6.4.2 BASF
  • 6.4.3 Birla Carbon
  • 6.4.4 Cabot Corporation
  • 6.4.5 Eastman Chemical Company
  • 6.4.6 Evonik Industries AG
  • 6.4.7 J.M. Huber Corporation
  • 6.4.8 LANXESS
  • 6.4.9 Madhu Silica Pvt. Ltd.
  • 6.4.10 Orion Engineered Carbons GmbH
  • 6.4.11 QEMETICA
  • 6.4.12 QUECHEN
  • 6.4.13 Shin-Etsu Chemical Co., Ltd.
  • 6.4.14 Solvay
  • 6.4.15 Sumitomo Chemical Co., Ltd.
  • 6.4.16 Tokuyama Corporation
  • 6.4.17 Tosoh Corporation
  • 6.4.18 Wacker Chemie AG

7 Market Opportunities and Future Outlook

• 7.1 White-Space and Unmet-Need Assessment