사출성형 모니터링 시스템 : 세계 시장 점유율과 순위, 총판매량 및 수요 예측(2025-2031년)

The global market for Injection Molding Monitoring System was estimated to be worth US$ 648 million in 2024 and is forecast to a readjusted size of US$ 991 million by 2031 with a CAGR of 6.4% during the forecast period 2025-2031.

This report provides a comprehensive assessment of recent tariff adjustments and international strategic countermeasures on Injection Molding Monitoring System cross-border industrial footprints, capital allocation patterns, regional economic interdependencies, and supply chain reconfigurations.

The injection molding monitoring system is an intelligent device used to monitor and control the injection molding process in real time, aiming to improve production efficiency and product quality. It uses sensors and data acquisition modules to monitor key parameters such as injection pressure, temperature, speed, cycle time and mold status in real time, and transmits data to the central control system for analysis and optimization. The system can detect production anomalies in a timely manner, reduce scrap rates, and support process optimization and traceability management.

The Injection Molding Monitoring System market is shaped by a well-integrated supply chain, where upstream suppliers provide sensors, controllers, and software platforms, while downstream demand comes from automotive, packaging, electronics, and medical manufacturers requiring high-precision molding. System integrators play a key role in combining hardware and software into turnkey solutions.

In 2024, global production reached about 48,000 units, with an average price of US$13,476 per unit, reflecting moderate scale efficiency. A typical production line has limited capacity, as these systems require high customization and calibration, which constrains output compared with standard industrial devices.

Cost structures are driven by advanced sensor technologies, proprietary software, and integration services. Gross margins are relatively healthy, as end-users value efficiency gains and defect reduction. Estimated gross margins often range between 35-45%, allowing suppliers to reinvest in R&D and maintain competitiveness despite increasing hardware commoditization.

The Injection Molding Monitoring System market is a specialized segment of industrial automation and quality control that focuses on real-time measurement, analysis, and optimization of molding processes to ensure consistent part quality and production efficiency.

Geographically, Asia-Pacific represents supported by its expanding automotive, electronics, and packaging industries, while North America and Europe maintain strong demand due to advanced automation and strict regulatory standards in medical and automotive sectors. The industry is characterized by a medium-volume, high-customization model, where monitoring systems are adapted to specific mold designs, machine platforms, and end-use applications, making it both technology-intensive and service-oriented.

Major players such as Kistler, ENGEL, and Futaba dominate with advanced Software-only Monitoring System and turnkey solutions, while smaller regional companies and integrators provide cost-effective retrofitting and localized support. The global key manufacturers of Injection Molding Monitoring System include ENGEL, Kistler, Husky Technologies, Mold-Masters, MinebeaMitsumi, RJG Inc., Shibaura Machine, Futaba Corporation, SiboTech Automation, etc. The top five manufacturers held 39.39% of the market, in terms of Injection Molding Monitoring System revenue in 2024.

Driven by the growing demand for precision components in automotive, medical devices, consumer electronics, and packaging, the market has expanded steadily as manufacturers prioritize process transparency, defect reduction, and regulatory compliance.

This report aims to provide a comprehensive presentation of the global market for Injection Molding Monitoring System, focusing on the total sales volume, sales revenue, price, key companies market share and ranking, together with an analysis of Injection Molding Monitoring System by region & country, by Type, and by Application.

The Injection Molding Monitoring System market size, estimations, and forecasts are provided in terms of sales volume (Units) and sales revenue ($ millions), considering 2024 as the base year, with history and forecast data for the period from 2020 to 2031. With both quantitative and qualitative analysis, to help readers develop business/growth strategies, assess the market competitive situation, analyze their position in the current marketplace, and make informed business decisions regarding Injection Molding Monitoring System.

Market Segmentation

By Company

• ENGEL Group
• Kistler
• Husky Technologies
• Mold-Masters
• MinebeaMitsumi
• RJG Inc.
• Shibaura Machine
• Futaba Corporation
• SiboTech Automation
• SOLOMON Technology Corporation
• Guangdong Lisen Automation
• Clariprod
• Intouch Monitoring Ltd
• Mingo Smart Factory
• MOULDFLO

Segment by Type

• Software-only Monitoring System
• Hybrid Monitoring System

Segment by Application

• Automobile Industry
• 3C Electronic
• Electronic Communication Industry
• Medical Industry
• Others

By Region

• North America
  • United States
  • Canada
• Asia-Pacific
  • China
  • Japan
  • South Korea
  • Southeast Asia
  • India
  • Australia
  • Rest of Asia-Pacific
• Europe
  • Germany
  • France
  • U.K.
  • Italy
  • Netherlands
  • Nordic Countries
  • Rest of Europe
• Latin America
  • Mexico
  • Brazil
  • Rest of Latin America
• Middle East & Africa
  • Turkey
  • Saudi Arabia
  • UAE
  • Rest of MEA

Chapter Outline

Chapter 1: Introduces the report scope of the report, global total market size (value, volume and price). This chapter also provides the market dynamics, latest developments of the market, the driving factors and restrictive factors of the market, the challenges and risks faced by manufacturers in the industry, and the analysis of relevant policies in the industry.

Chapter 2: Detailed analysis of Injection Molding Monitoring System manufacturers competitive landscape, price, sales and revenue market share, latest development plan, merger, and acquisition information, etc.

Chapter 3: Provides the analysis of various market segments by Type, covering the market size and development potential of each market segment, to help readers find the blue ocean market in different market segments.

Chapter 4: Provides the analysis of various market segments by Application, covering the market size and development potential of each market segment, to help readers find the blue ocean market in different downstream markets.

Chapter 5: Sales, revenue of Injection Molding Monitoring System in regional level. It provides a quantitative analysis of the market size and development potential of each region and introduces the market development, future development prospects, market space, and market size of each country in the world.

Chapter 6: Sales, revenue of Injection Molding Monitoring System in country level. It provides sigmate data by Type, and by Application for each country/region.

Chapter 7: Provides profiles of key players, introducing the basic situation of the main companies in the market in detail, including product sales, revenue, price, gross margin, product introduction, recent development, etc.

Chapter 8: Analysis of industrial chain, including the upstream and downstream of the industry.

Chapter 9: Conclusion.

Table of Contents

1 Market Overview

• 1.1 Injection Molding Monitoring System Product Introduction
• 1.2 Global Injection Molding Monitoring System Market Size Forecast
  • 1.2.1 Global Injection Molding Monitoring System Sales Value (2020-2031)
  • 1.2.2 Global Injection Molding Monitoring System Sales Volume (2020-2031)
  • 1.2.3 Global Injection Molding Monitoring System Sales Price (2020-2031)
• 1.3 Injection Molding Monitoring System Market Trends & Drivers
  • 1.3.1 Injection Molding Monitoring System Industry Trends
  • 1.3.2 Injection Molding Monitoring System Market Drivers & Opportunity
  • 1.3.3 Injection Molding Monitoring System Market Challenges
  • 1.3.4 Injection Molding Monitoring System Market Restraints
• 1.4 Assumptions and Limitations
• 1.5 Study Objectives
• 1.6 Years Considered

2 Competitive Analysis by Company

• 2.1 Global Injection Molding Monitoring System Players Revenue Ranking (2024)
• 2.2 Global Injection Molding Monitoring System Revenue by Company (2020-2025)
• 2.3 Global Injection Molding Monitoring System Players Sales Volume Ranking (2024)
• 2.4 Global Injection Molding Monitoring System Sales Volume by Company Players (2020-2025)
• 2.5 Global Injection Molding Monitoring System Average Price by Company (2020-2025)
• 2.6 Key Manufacturers Injection Molding Monitoring System Manufacturing Base and Headquarters
• 2.7 Key Manufacturers Injection Molding Monitoring System Product Offered
• 2.8 Key Manufacturers Time to Begin Mass Production of Injection Molding Monitoring System
• 2.9 Injection Molding Monitoring System Market Competitive Analysis
  • 2.9.1 Injection Molding Monitoring System Market Concentration Rate (2020-2025)
  • 2.9.2 Global 5 and 10 Largest Manufacturers by Injection Molding Monitoring System Revenue in 2024
  • 2.9.3 Global Top Manufacturers by Company Type (Tier 1, Tier 2, and Tier 3) & (based on the Revenue in Injection Molding Monitoring System as of 2024)
• 2.10 Mergers & Acquisitions, Expansion

3 Segmentation by Type

• 3.1 Introduction by Type
  • 3.1.1 Software-only Monitoring System
  • 3.1.2 Hybrid Monitoring System
• 3.2 Global Injection Molding Monitoring System Sales Value by Type
  • 3.2.1 Global Injection Molding Monitoring System Sales Value by Type (2020 VS 2024 VS 2031)
  • 3.2.2 Global Injection Molding Monitoring System Sales Value, by Type (2020-2031)
  • 3.2.3 Global Injection Molding Monitoring System Sales Value, by Type (%) (2020-2031)
• 3.3 Global Injection Molding Monitoring System Sales Volume by Type
  • 3.3.1 Global Injection Molding Monitoring System Sales Volume by Type (2020 VS 2024 VS 2031)
  • 3.3.2 Global Injection Molding Monitoring System Sales Volume, by Type (2020-2031)
  • 3.3.3 Global Injection Molding Monitoring System Sales Volume, by Type (%) (2020-2031)
• 3.4 Global Injection Molding Monitoring System Average Price by Type (2020-2031)

4 Segmentation by Application

• 4.1 Introduction by Application
  • 4.1.1 Automobile Industry
  • 4.1.2 3C Electronic
  • 4.1.3 Electronic Communication Industry
  • 4.1.4 Medical Industry
  • 4.1.5 Others
• 4.2 Global Injection Molding Monitoring System Sales Value by Application
  • 4.2.1 Global Injection Molding Monitoring System Sales Value by Application (2020 VS 2024 VS 2031)
  • 4.2.2 Global Injection Molding Monitoring System Sales Value, by Application (2020-2031)
  • 4.2.3 Global Injection Molding Monitoring System Sales Value, by Application (%) (2020-2031)
• 4.3 Global Injection Molding Monitoring System Sales Volume by Application
  • 4.3.1 Global Injection Molding Monitoring System Sales Volume by Application (2020 VS 2024 VS 2031)
  • 4.3.2 Global Injection Molding Monitoring System Sales Volume, by Application (2020-2031)
  • 4.3.3 Global Injection Molding Monitoring System Sales Volume, by Application (%) (2020-2031)
• 4.4 Global Injection Molding Monitoring System Average Price by Application (2020-2031)

5 Segmentation by Region

• 5.1 Global Injection Molding Monitoring System Sales Value by Region
  • 5.1.1 Global Injection Molding Monitoring System Sales Value by Region: 2020 VS 2024 VS 2031
  • 5.1.2 Global Injection Molding Monitoring System Sales Value by Region (2020-2025)
  • 5.1.3 Global Injection Molding Monitoring System Sales Value by Region (2026-2031)
  • 5.1.4 Global Injection Molding Monitoring System Sales Value by Region (%), (2020-2031)
• 5.2 Global Injection Molding Monitoring System Sales Volume by Region
  • 5.2.1 Global Injection Molding Monitoring System Sales Volume by Region: 2020 VS 2024 VS 2031
  • 5.2.2 Global Injection Molding Monitoring System Sales Volume by Region (2020-2025)
  • 5.2.3 Global Injection Molding Monitoring System Sales Volume by Region (2026-2031)
  • 5.2.4 Global Injection Molding Monitoring System Sales Volume by Region (%), (2020-2031)
• 5.3 Global Injection Molding Monitoring System Average Price by Region (2020-2031)
• 5.4 North America
  • 5.4.1 North America Injection Molding Monitoring System Sales Value, 2020-2031
  • 5.4.2 North America Injection Molding Monitoring System Sales Value by Country (%), 2024 VS 2031
• 5.5 Europe
  • 5.5.1 Europe Injection Molding Monitoring System Sales Value, 2020-2031
  • 5.5.2 Europe Injection Molding Monitoring System Sales Value by Country (%), 2024 VS 2031
• 5.6 Asia Pacific
  • 5.6.1 Asia Pacific Injection Molding Monitoring System Sales Value, 2020-2031
  • 5.6.2 Asia Pacific Injection Molding Monitoring System Sales Value by Region (%), 2024 VS 2031
• 5.7 South America
  • 5.7.1 South America Injection Molding Monitoring System Sales Value, 2020-2031
  • 5.7.2 South America Injection Molding Monitoring System Sales Value by Country (%), 2024 VS 2031
• 5.8 Middle East & Africa
  • 5.8.1 Middle East & Africa Injection Molding Monitoring System Sales Value, 2020-2031
  • 5.8.2 Middle East & Africa Injection Molding Monitoring System Sales Value by Country (%), 2024 VS 2031

6 Segmentation by Key Countries/Regions

• 6.1 Key Countries/Regions Injection Molding Monitoring System Sales Value Growth Trends, 2020 VS 2024 VS 2031
• 6.2 Key Countries/Regions Injection Molding Monitoring System Sales Value and Sales Volume
  • 6.2.1 Key Countries/Regions Injection Molding Monitoring System Sales Value, 2020-2031
  • 6.2.2 Key Countries/Regions Injection Molding Monitoring System Sales Volume, 2020-2031
• 6.3 United States
  • 6.3.1 United States Injection Molding Monitoring System Sales Value, 2020-2031
  • 6.3.2 United States Injection Molding Monitoring System Sales Value by Type (%), 2024 VS 2031
  • 6.3.3 United States Injection Molding Monitoring System Sales Value by Application, 2024 VS 2031
• 6.4 Europe
  • 6.4.1 Europe Injection Molding Monitoring System Sales Value, 2020-2031
  • 6.4.2 Europe Injection Molding Monitoring System Sales Value by Type (%), 2024 VS 2031
  • 6.4.3 Europe Injection Molding Monitoring System Sales Value by Application, 2024 VS 2031
• 6.5 China
  • 6.5.1 China Injection Molding Monitoring System Sales Value, 2020-2031
  • 6.5.2 China Injection Molding Monitoring System Sales Value by Type (%), 2024 VS 2031
  • 6.5.3 China Injection Molding Monitoring System Sales Value by Application, 2024 VS 2031
• 6.6 Japan
  • 6.6.1 Japan Injection Molding Monitoring System Sales Value, 2020-2031
  • 6.6.2 Japan Injection Molding Monitoring System Sales Value by Type (%), 2024 VS 2031
  • 6.6.3 Japan Injection Molding Monitoring System Sales Value by Application, 2024 VS 2031
• 6.7 South Korea
  • 6.7.1 South Korea Injection Molding Monitoring System Sales Value, 2020-2031
  • 6.7.2 South Korea Injection Molding Monitoring System Sales Value by Type (%), 2024 VS 2031
  • 6.7.3 South Korea Injection Molding Monitoring System Sales Value by Application, 2024 VS 2031
• 6.8 Southeast Asia
  • 6.8.1 Southeast Asia Injection Molding Monitoring System Sales Value, 2020-2031
  • 6.8.2 Southeast Asia Injection Molding Monitoring System Sales Value by Type (%), 2024 VS 2031
  • 6.8.3 Southeast Asia Injection Molding Monitoring System Sales Value by Application, 2024 VS 2031
• 6.9 India
  • 6.9.1 India Injection Molding Monitoring System Sales Value, 2020-2031
  • 6.9.2 India Injection Molding Monitoring System Sales Value by Type (%), 2024 VS 2031
  • 6.9.3 India Injection Molding Monitoring System Sales Value by Application, 2024 VS 2031

7 Company Profiles

• 7.1 ENGEL Group
  • 7.1.1 ENGEL Group Company Information
  • 7.1.2 ENGEL Group Introduction and Business Overview
  • 7.1.3 ENGEL Group Injection Molding Monitoring System Sales, Revenue, Price and Gross Margin (2020-2025)
  • 7.1.4 ENGEL Group Injection Molding Monitoring System Product Offerings
  • 7.1.5 ENGEL Group Recent Development
• 7.2 Kistler
  • 7.2.1 Kistler Company Information
  • 7.2.2 Kistler Introduction and Business Overview
  • 7.2.3 Kistler Injection Molding Monitoring System Sales, Revenue, Price and Gross Margin (2020-2025)
  • 7.2.4 Kistler Injection Molding Monitoring System Product Offerings
  • 7.2.5 Kistler Recent Development
• 7.3 Husky Technologies
  • 7.3.1 Husky Technologies Company Information
  • 7.3.2 Husky Technologies Introduction and Business Overview
  • 7.3.3 Husky Technologies Injection Molding Monitoring System Sales, Revenue, Price and Gross Margin (2020-2025)
  • 7.3.4 Husky Technologies Injection Molding Monitoring System Product Offerings
  • 7.3.5 Husky Technologies Recent Development
• 7.4 Mold-Masters
  • 7.4.1 Mold-Masters Company Information
  • 7.4.2 Mold-Masters Introduction and Business Overview
  • 7.4.3 Mold-Masters Injection Molding Monitoring System Sales, Revenue, Price and Gross Margin (2020-2025)
  • 7.4.4 Mold-Masters Injection Molding Monitoring System Product Offerings
  • 7.4.5 Mold-Masters Recent Development
• 7.5 MinebeaMitsumi
  • 7.5.1 MinebeaMitsumi Company Information
  • 7.5.2 MinebeaMitsumi Introduction and Business Overview
  • 7.5.3 MinebeaMitsumi Injection Molding Monitoring System Sales, Revenue, Price and Gross Margin (2020-2025)
  • 7.5.4 MinebeaMitsumi Injection Molding Monitoring System Product Offerings
  • 7.5.5 MinebeaMitsumi Recent Development
• 7.6 RJG Inc.
  • 7.6.1 RJG Inc. Company Information
  • 7.6.2 RJG Inc. Introduction and Business Overview
  • 7.6.3 RJG Inc. Injection Molding Monitoring System Sales, Revenue, Price and Gross Margin (2020-2025)
  • 7.6.4 RJG Inc. Injection Molding Monitoring System Product Offerings
  • 7.6.5 RJG Inc. Recent Development
• 7.7 Shibaura Machine
  • 7.7.1 Shibaura Machine Company Information
  • 7.7.2 Shibaura Machine Introduction and Business Overview
  • 7.7.3 Shibaura Machine Injection Molding Monitoring System Sales, Revenue, Price and Gross Margin (2020-2025)
  • 7.7.4 Shibaura Machine Injection Molding Monitoring System Product Offerings
  • 7.7.5 Shibaura Machine Recent Development
• 7.8 Futaba Corporation
  • 7.8.1 Futaba Corporation Company Information
  • 7.8.2 Futaba Corporation Introduction and Business Overview
  • 7.8.3 Futaba Corporation Injection Molding Monitoring System Sales, Revenue, Price and Gross Margin (2020-2025)
  • 7.8.4 Futaba Corporation Injection Molding Monitoring System Product Offerings
  • 7.8.5 Futaba Corporation Recent Development
• 7.9 SiboTech Automation
  • 7.9.1 SiboTech Automation Company Information
  • 7.9.2 SiboTech Automation Introduction and Business Overview
  • 7.9.3 SiboTech Automation Injection Molding Monitoring System Sales, Revenue, Price and Gross Margin (2020-2025)
  • 7.9.4 SiboTech Automation Injection Molding Monitoring System Product Offerings
  • 7.9.5 SiboTech Automation Recent Development
• 7.10 SOLOMON Technology Corporation
  • 7.10.1 SOLOMON Technology Corporation Company Information
  • 7.10.2 SOLOMON Technology Corporation Introduction and Business Overview
  • 7.10.3 SOLOMON Technology Corporation Injection Molding Monitoring System Sales, Revenue, Price and Gross Margin (2020-2025)
  • 7.10.4 SOLOMON Technology Corporation Injection Molding Monitoring System Product Offerings
  • 7.10.5 SOLOMON Technology Corporation Recent Development
• 7.11 Guangdong Lisen Automation
  • 7.11.1 Guangdong Lisen Automation Company Information
  • 7.11.2 Guangdong Lisen Automation Introduction and Business Overview
  • 7.11.3 Guangdong Lisen Automation Injection Molding Monitoring System Sales, Revenue, Price and Gross Margin (2020-2025)
  • 7.11.4 Guangdong Lisen Automation Injection Molding Monitoring System Product Offerings
  • 7.11.5 Guangdong Lisen Automation Recent Development
• 7.12 Clariprod
  • 7.12.1 Clariprod Company Information
  • 7.12.2 Clariprod Introduction and Business Overview
  • 7.12.3 Clariprod Injection Molding Monitoring System Sales, Revenue, Price and Gross Margin (2020-2025)
  • 7.12.4 Clariprod Injection Molding Monitoring System Product Offerings
  • 7.12.5 Clariprod Recent Development
• 7.13 Intouch Monitoring Ltd
  • 7.13.1 Intouch Monitoring Ltd Company Information
  • 7.13.2 Intouch Monitoring Ltd Introduction and Business Overview
  • 7.13.3 Intouch Monitoring Ltd Injection Molding Monitoring System Sales, Revenue, Price and Gross Margin (2020-2025)
  • 7.13.4 Intouch Monitoring Ltd Injection Molding Monitoring System Product Offerings
  • 7.13.5 Intouch Monitoring Ltd Recent Development
• 7.14 Mingo Smart Factory
  • 7.14.1 Mingo Smart Factory Company Information
  • 7.14.2 Mingo Smart Factory Introduction and Business Overview
  • 7.14.3 Mingo Smart Factory Injection Molding Monitoring System Sales, Revenue, Price and Gross Margin (2020-2025)
  • 7.14.4 Mingo Smart Factory Injection Molding Monitoring System Product Offerings
  • 7.14.5 Mingo Smart Factory Recent Development
• 7.15 MOULDFLO
  • 7.15.1 MOULDFLO Company Information
  • 7.15.2 MOULDFLO Introduction and Business Overview
  • 7.15.3 MOULDFLO Injection Molding Monitoring System Sales, Revenue, Price and Gross Margin (2020-2025)
  • 7.15.4 MOULDFLO Injection Molding Monitoring System Product Offerings
  • 7.15.5 MOULDFLO Recent Development

8 Industry Chain Analysis

• 8.1 Injection Molding Monitoring System Industrial Chain
• 8.2 Injection Molding Monitoring System Upstream Analysis
  • 8.2.1 Key Raw Materials
  • 8.2.2 Raw Materials Key Suppliers
  • 8.2.3 Manufacturing Cost Structure
• 8.3 Midstream Analysis
• 8.4 Downstream Analysis (Customers Analysis)
• 8.5 Sales Model and Sales Channels
  • 8.5.1 Injection Molding Monitoring System Sales Model
  • 8.5.2 Sales Channel
  • 8.5.3 Injection Molding Monitoring System Distributors

9 Research Findings and Conclusion

10 Appendix

• 10.1 Research Methodology
  • 10.1.1 Methodology/Research Approach
    • 10.1.1.1 Research Programs/Design
    • 10.1.1.2 Market Size Estimation
    • 10.1.1.3 Market Breakdown and Data Triangulation
  • 10.1.2 Data Source
    • 10.1.2.1 Secondary Sources
    • 10.1.2.2 Primary Sources
• 10.2 Author Details
• 10.3 Disclaimer