세계의 알루미늄 다이캐스트 합금 시장 인사이트 및 예측(-2031년)

This study defines Aluminum Die Casting Alloys as finished and semi-finished die-cast aluminum parts and assemblies, rather than upstream alloy ingots or generic cast ingots. The scope covers components produced by high-pressure die casting (HPDC), low-pressure die casting (LPDC) and gravity die casting (GDC), including machined and value-added parts integrated into modules across automotive, industrial, electrical & electronics, consumer, construction and other end-use sectors. On this basis, the global Aluminum Die Casting Alloys market is estimated at around USD 148.8 billion in 2024, up from approximately USD 87.9 billion in 2020, reflecting a strong post-pandemic rebound and the impact of higher aluminum and energy prices (2020-2024 value CAGR ~14.1%). Looking ahead, market value is projected to reach about USD 220.9 billion by 2031, implying a 2025-2031 CAGR of roughly 5.8%.

Over the full 2020-2031 period, our tonnage model points to mid-single-digit volume growth (around 5% CAGR), with value expansion gradually normalizing from price-driven to primarily volume- and mix-driven as input costs stabilize and product mix shifts toward higher value-added structural castings.

By alloy family, the market continues to be dominated by A383 (ADC12) and A380 as the workhorse die-casting grades, together accounting for just over half of global value in 2024 and remaining the backbone of the industry through 2031. In 2024, A383 represents roughly 30-31% of global value and A380 about 27%, with their combined share easing only modestly by 2031 as demand diversifies. A356 and "Other" structural and specialty alloys (including higher-ductility Al-Si-Mg families and advanced HPDC structural grades) exhibit the fastest growth, with high single-digit CAGRs between 2025 and 2031 as OEMs migrate more crash-relevant body structures, chassis parts and battery housings to die-cast aluminum. A360, A413 and B390 retain important but smaller niches in corrosion-resistant, thin-wall, high-wear and high-temperature components. Overall, the alloy mix evolves gradually: mainstream A3xx alloys continue to carry the majority of volume and value, while structural and specialty alloys expand their share from roughly one-fifth to approaching one-quarter of the market by 2031.

External benchmarks on die-casting alloy usage support this pattern, consistently identifying A380/ADC12-type alloys as the largest single family globally, with increasing adoption of higher-performance structural alloys for demanding automotive and industrial applications.

On the demand side, automotive and transportation remains the core of the Aluminum Die Casting Alloys market. Passenger vehicles-covering powertrain & drivetrain components, chassis, suspension & steering components, body, structural & safety components and interior, exterior & comfort systems-account for the majority of global demand. Commercial vehicles & buses, together with off-highway vehicles and transportation equipment, provide additional volume in engines, transmissions, axles and structural modules. Non-automotive sectors form a diversified second pillar of demand: industrial machinery & power tools, electrical & electronics (including telecommunications & ICT hardware), consumer durables & home appliances, building & construction hardware, energy & power (including renewables), aerospace & defense & marine, healthcare & medical equipment, and other uses such as furniture, lighting and sports & leisure. These segments generally grow more steadily but at somewhat lower rates than the fastest automotive sub-segments, providing a degree of resilience across economic cycles.

Regionally, the market is anchored by Asia, with China as the single largest producer and consumer of Aluminum Die Casting Alloys. China already accounts for close to half of global die-cast aluminum tonnage, supported by its scale in internal combustion engine (ICE) vehicles, rapid growth in new energy vehicles (NEVs), and extensive capacity in industrial, appliance and electronics castings. Earlier sections of this report show that China's die-casting output has grown faster than the global average since 2019 and is expected to retain or slightly increase its share through 2031 as local die casters move up the value chain and NEV platforms proliferate. North America, Europe, Japan, India and South Korea form additional core clusters, each with distinct profiles in terms of product mix, technology depth and regulatory pressure.

External market studies on aluminum casting broadly corroborate this scale and growth trajectory, placing the global aluminum casting market in the USD 70-90 billion range in the early 2020s and projecting mid-single- to high-single-digit value CAGRs to 2031, with Asia-Pacific and automotive applications as the primary growth drivers.

Within this context, the forecast for Aluminum Die Casting Alloys is characterized by three overarching themes. First, the market remains structurally supported by lightweighting, electrification and thermal-management requirements in vehicles and equipment, which increase aluminum content per unit even as traditional ICE castings mature. Second, alloy and application mix shift toward more structural, safety-critical and thermally demanding parts, amplifying demand for higher-value alloys and advanced HPDC technologies (including vacuum die casting and megacasting) rather than merely adding tonnage. Third, cost, energy and ESG constraints cap pricing power and accelerate consolidation and technological upgrading among die casters: energy-intensive and sub-scale plants face rising pressure, while leading players invest in high-efficiency melting, automation, process control and low-carbon aluminum to remain competitive under tightening regulatory regimes.

Report Includes:

This report presents an overview of global market for Aluminum Die Casting Alloys, capacity, output, revenue and price. Analyses of the global market trends, with historic market revenue/sales data for 2020 - 2024, estimates for 2025, and projections of CAGR through 2031.

This report researches the key producers of Aluminum Die Casting Alloys, also provides the consumption of main regions and countries. Highlights of the upcoming market potential for Aluminum Die Casting Alloys, and key regions/countries of focus to forecast this market into various segments and sub-segments. Country specific data and market value analysis for the U.S., Canada, Mexico, Brazil, China, Japan, South Korea, Southeast Asia, India, Germany, the U.K., Italy, Middle East, Africa, and Other Countries.

This report focuses on the Aluminum Die Casting Alloys sales, revenue, market share and industry ranking of main manufacturers, data from 2020 to 2024. Identification of the major stakeholders in the global Aluminum Die Casting Alloys market, and analysis of their competitive landscape and market positioning based on recent developments and segmental revenues. This report will help stakeholders to understand the competitive landscape and gain more insights and position their businesses and market strategies in a better way.

This report analyzes the segments data by Type and by Application, sales, revenue, and price, from 2020 to 2031. Evaluation and forecast the market size for Aluminum Die Casting Alloys sales, projected growth trends, production technology, application and end-user industry.

Descriptive company profiles of the major global players, including Nemak, Ryobi, Ahresty, IKD, Wencan Group, Georg Fischer, Guangdong Hongtu, Xusheng, and Millison Technologies, etc.

Market Segmentation

By Company

• Nemak
• Ryobi
• CITIC Dicastal
• Ahresty
• Martinrea
• IKD
• Wencan Group
• Guangdong Hongtu
• Handtmann
• Aludyne
• Pace Industries
• Endurance
• Chongqing Millison
• Rockman Industries
• Georg Fischer
• Rheinmetall
• Gnutti Carlo
• LTH
• Jiangsu Rongtai
• Nanjing Chervon
• Teksid
• Ningbo Xusheng
• DGS
• Hongte Technology
• Gibbs
• Foryou
• Form Technologies
• Suzhou Yadelin
• Ningbo Spey
• Sandhar
• Eontec
• MK Tron
• Tatfook

Segment by Type

• A383
• A356
• A380
• A360
• A413
• B390
• Other

Segment by Application

• Passenger Vehicles - Powertrain & Drivetrain Components
• Passenger Vehicles - Chassis, Suspension & Steering Components
• Passenger Vehicles - Body, Structural & Safety Components
• Passenger Vehicles - Interior, Exterior & Comfort Systems
• Commercial Vehicles & Buses
• Off-highway Vehicles & Transportation Equipment
• Industrial Machinery & Power Tools
• Electrical & Electronics
• Consumer Durables & Home Appliances
• Building & Construction Hardware
• Energy & Power
• Aerospace & Defense & Marine
• Healthcare & Medical Equipment
• Others

Production by Region

• China
• United States
• Japan
• India
• Germany
• Italy
• South Korea
• Other

Sales by Region

• US & Canada
  • U.S.
  • Canada
• Asia-Pacific
  • China
  • Asia (excluding China)
  • Japan
  • South Korea
  • China Taiwan
  • Southeast Asia
  • India

Europe

• Germany
• France
• U.K.
• Italy
• Russia

Middle East, Africa, Latin America

• Brazil
• Mexico
• Turkey
• Israel
• GCC Countries

Chapter Outline

Chapter 1: Introduces the report scope of the report, executive summary of different market segments (by Type and by Application, etc), including the market size of each market segment, future development potential, and so on. It offers a high-level view of the current state of the market and its likely evolution in the short to mid-term, and long term.

Chapter 2: Aluminum Die Casting Alloys production/output of global and key producers (regions/countries). It provides a quantitative analysis of the production, and development potential of each producer in the next six years.

Chapter 3: Sales (consumption), revenue of Aluminum Die Casting Alloys in global, regional level and country level. It provides a quantitative analysis of the market size and development potential of each region and its main countries and introduces the market development, future development prospects, market space of each country in the world.

Chapter 4: Detailed analysis of Aluminum Die Casting Alloys manufacturers competitive landscape, price, sales, revenue, market share and industry ranking, latest development plan, merger, and acquisition information, etc.

Chapter 5: Provides the analysis of various market segments by Type, covering the sales, revenue, average price, and development potential of each market segment, to help readers find the blue ocean market in different market segments.

Chapter 6: Provides the analysis of various market segments by Application, covering the sales, revenue, average price, and development potential of each market segment, to help readers find the blue ocean market in different downstream markets.

Chapter 7: North America (US & Canada) by Type, by Application and by country, sales, and revenue for each segment.

Chapter 8: Europe by Type, by Application and by country, sales, and revenue for each segment.

Chapter 9: China by Type, and by Application, sales, and revenue for each segment.

Chapter 10: Asia (excluding China) by Type, by Application and by region, sales, and revenue for each segment.

Chapter 11: Middle East, Africa, Latin America by Type, by Application and by country, sales, and revenue for each segment.

Chapter 12: Provides profiles of key manufacturers, introducing the basic situation of the main companies in the market in detail, including product descriptions and specifications, Aluminum Die Casting Alloys sales, revenue, price, gross margin, and recent development, etc.

Chapter 13: Analysis of industrial chain, sales channel, key raw materials, distributors and customers.

Chapter 14: Introduces the market dynamics, latest developments of the market, the driving factors and restrictive factors of the market, the challenges and risks faced by manufacturers in the industry, and the analysis of relevant policies in the industry.

Chapter 15: The main points and conclusions of the report.

Table of Contents

1 STUDY COVERAGE

• 1.1 Aluminum Die Casting Alloys Product Introduction
• 1.2 Market by Type
  • 1.2.1 Global Aluminum Die Casting Alloys Market Size by Type, 2020 VS 2024 VS 2031
  • 1.2.2 A380
  • 1.2.3 A383
  • 1.2.4 A356
  • 1.2.5 A360
  • 1.2.6 A413
  • 1.2.7 B390
  • 1.2.8 Other
• 1.3 Market by Application
  • 1.3.1 Global Aluminum Die Casting Alloys Market Size by Application, 2020 VS 2024 VS 2031
  • 1.3.2 Passenger Vehicles - Powertrain & Drivetrain Components
  • 1.3.3 Passenger Vehicles - Chassis, Suspension & Steering Components
  • 1.3.4 Passenger Vehicles - Body, Structural & Safety Components
  • 1.3.5 Passenger Vehicles - Interior, Exterior & Comfort Systems
  • 1.3.6 Commercial Vehicles & Buses
  • 1.3.7 Off-highway Vehicles & Transportation Equipment
  • 1.3.8 Industrial Machinery & Power Tools
  • 1.3.9 Electrical & Electronics
  • 1.3.10 Consumer Durables & Home Appliances
  • 1.3.11 Building & Construction Hardware
  • 1.3.12 Energy & Power
  • 1.3.13 Aerospace & Defense & Marine
  • 1.3.14 Healthcare & Medical Equipment
  • 1.3.15 Others
• 1.4 Assumptions and Limitations
• 1.5 Study Objectives
• 1.6 Years Considered

2 GLOBAL ALUMINUM DIE CASTING ALLOYS PRODUCTION

• 2.1 Global Aluminum Die Casting Alloys Production Capacity (2020-2031)
• 2.2 Global Aluminum Die Casting Alloys Production by Region: 2020 VS 2024 VS 2031
• 2.3 Global Aluminum Die Casting Alloys Production by Region
  • 2.3.1 Global Aluminum Die Casting Alloys Historic Production by Region (2020-2025)
  • 2.3.2 Global Aluminum Die Casting Alloys Forecasted Production by Region (2026-2031)
  • 2.3.3 Global Aluminum Die Casting Alloys Production Market Share by Region (2020-2031)
• 2.4 China
• 2.5 United States
• 2.6 Japan
• 2.7 India
• 2.8 Germany
• 2.9 Italy
• 2.10 South Korea

3 EXECUTIVE SUMMARY

• 3.1 Global Aluminum Die Casting Alloys Revenue Estimates and Forecasts 2020-2031
• 3.2 Global Aluminum Die Casting Alloys Revenue by Region
  • 3.2.1 Global Aluminum Die Casting Alloys Revenue by Region: 2020 VS 2024 VS 2031
  • 3.2.2 Global Aluminum Die Casting Alloys Revenue by Region (2020-2025)
  • 3.2.3 Global Aluminum Die Casting Alloys Revenue by Region (2026-2031)
  • 3.2.4 Global Aluminum Die Casting Alloys Revenue Market Share by Region (2020-2031)
• 3.3 Global Aluminum Die Casting Alloys Sales Estimates and Forecasts 2020-2031
• 3.4 Global Aluminum Die Casting Alloys Sales by Region
  • 3.4.1 Global Aluminum Die Casting Alloys Sales by Region: 2020 VS 2024 VS 2031
  • 3.4.2 Global Aluminum Die Casting Alloys Sales by Region (2020-2025)
  • 3.4.3 Global Aluminum Die Casting Alloys Sales by Region (2026-2031)
  • 3.4.4 Global Aluminum Die Casting Alloys Sales Market Share by Region (2020-2031)
• 3.5 China
• 3.6 Europe
• 3.7 North America
• 3.8 APeC
• 3.9 Middle East, Africa and Latin America

4 COMPETITION BY MANUFACTURERS

• 4.1 Global Aluminum Die Casting Alloys Sales by Manufacturers
  • 4.1.1 Global Aluminum Die Casting Alloys Sales by Manufacturers (2020-2025)
  • 4.1.2 Global Aluminum Die Casting Alloys Sales Market Share by Manufacturers (2020-2025)
  • 4.1.3 Global Top 10 and Top 5 Largest Manufacturers of Aluminum Die Casting Alloys in 2024
• 4.2 Global Aluminum Die Casting Alloys Revenue by Manufacturers
  • 4.2.1 Global Aluminum Die Casting Alloys Revenue by Manufacturers (2020-2025)
  • 4.2.2 Global Aluminum Die Casting Alloys Revenue Market Share by Manufacturers (2020-2025)
  • 4.2.3 Global Top 10 and Top 5 Companies by Aluminum Die Casting Alloys Revenue in 2024
• 4.3 Global Aluminum Die Casting Alloys Sales Price by Manufacturers (2020-2025)
• 4.4 Global Key Players of Aluminum Die Casting Alloys, Industry Ranking, 2023 VS 2024
• 4.5 Analysis of Competitive Landscape
  • 4.5.1 Manufacturers Market Concentration Ratio (CR5 and HHI)
  • 4.5.2 Global Aluminum Die Casting Alloys Market Share by Company Type (Tier 1, Tier 2, and Tier 3)
• 4.6 Global Key Manufacturers of Aluminum Die Casting Alloys, Manufacturing Base Distribution and Headquarters
• 4.7 Global Key Manufacturers of Aluminum Die Casting Alloys, Date of Established

5 MARKET SIZE BY TYPE

• 5.1 Global Aluminum Die Casting Alloys Sales by Type
  • 5.1.1 Global Aluminum Die Casting Alloys Historical Sales by Type (2020-2025)
  • 5.1.2 Global Aluminum Die Casting Alloys Forecasted Sales by Type (2026-2031)
  • 5.1.3 Global Aluminum Die Casting Alloys Sales Market Share by Type (2020-2031)
• 5.2 Global Aluminum Die Casting Alloys Revenue by Type
  • 5.2.1 Global Aluminum Die Casting Alloys Historical Revenue by Type (2020-2025)
  • 5.2.2 Global Aluminum Die Casting Alloys Forecasted Revenue by Type (2026-2031)
  • 5.2.3 Global Aluminum Die Casting Alloys Revenue Market Share by Type (2020-2031)
• 5.3 Global Aluminum Die Casting Alloys Price by Type
  • 5.3.1 Global Aluminum Die Casting Alloys Price by Type (2020-2025)
  • 5.3.2 Global Aluminum Die Casting Alloys Price Forecast by Type (2026-2031)

6 MARKET SIZE BY APPLICATION

• 6.1 Global Aluminum Die Casting Alloys Sales by Application
  • 6.1.1 Global Aluminum Die Casting Alloys Historical Sales by Application (2020-2025)
  • 6.1.2 Global Aluminum Die Casting Alloys Forecasted Sales by Application (2026-2031)
  • 6.1.3 Global Aluminum Die Casting Alloys Sales Market Share by Application (2020-2031)
• 6.2 Global Aluminum Die Casting Alloys Revenue by Application
  • 6.2.1 Global Aluminum Die Casting Alloys Historical Revenue by Application (2020-2025)
  • 6.2.2 Global Aluminum Die Casting Alloys Forecasted Revenue by Application (2026-2031)
  • 6.2.3 Global Aluminum Die Casting Alloys Revenue Market Share by Application (2020-2031)
• 6.3 Global Aluminum Die Casting Alloys Price by Application
  • 6.3.1 Global Aluminum Die Casting Alloys Price by Application (2020-2025)
  • 6.3.2 Global Aluminum Die Casting Alloys Price Forecast by Application (2026-2031)

7 NORTH AMERICA

• 7.1 North America Aluminum Die Casting Alloys Market Size by Type
  • 7.1.1 North America Aluminum Die Casting Alloys Sales by Type (2020-2031)
  • 7.1.2 North America Aluminum Die Casting Alloys Revenue by Type (2020-2031)
• 7.2 North America Aluminum Die Casting Alloys Market Size by Application
  • 7.2.1 North America Aluminum Die Casting Alloys Sales by Application (2020-2031)
  • 7.2.2 North America Aluminum Die Casting Alloys Revenue by Application (2020-2031)
• 7.3 North America Aluminum Die Casting Alloys Market Size by Country
  • 7.3.1 North America Aluminum Die Casting Alloys Revenue by Country: 2020 VS 2024 VS 2031
  • 7.3.2 North America Aluminum Die Casting Alloys Revenue by Country (2020-2031)
  • 7.3.3 North America Aluminum Die Casting Alloys Sales by Country (2020-2031)
  • 7.3.4 US
  • 7.3.5 Canada
  • 7.3.6 Mexico

8 EUROPE

• 8.1 Europe Aluminum Die Casting Alloys Market Size by Type
  • 8.1.1 Europe Aluminum Die Casting Alloys Sales by Type (2020-2031)
  • 8.1.2 Europe Aluminum Die Casting Alloys Revenue by Type (2020-2031)
• 8.2 Europe Aluminum Die Casting Alloys Market Size by Application
  • 8.2.1 Europe Aluminum Die Casting Alloys Sales by Application (2020-2031)
  • 8.2.2 Europe Aluminum Die Casting Alloys Revenue by Application (2020-2031)
• 8.3 Europe Aluminum Die Casting Alloys Market Size by Country
  • 8.3.1 Europe Aluminum Die Casting Alloys Revenue by Country: 2020 VS 2024 VS 2031
  • 8.3.2 Europe Aluminum Die Casting Alloys Sales by Country (2020-2031)
  • 8.3.3 Europe Aluminum Die Casting Alloys Revenue by Country (2020-2031)
  • 8.3.4 Germany
  • 8.3.5 Italy
  • 8.3.6 France
  • 8.3.7 U.K.
  • 8.3.8 Spain
  • 8.3.9 Russia

9 CHINA

• 9.1 China Aluminum Die Casting Alloys Market Size by Type
  • 9.1.1 China Aluminum Die Casting Alloys Sales by Type (2020-2031)
  • 9.1.2 China Aluminum Die Casting Alloys Revenue by Type (2020-2031)
• 9.2 China Aluminum Die Casting Alloys Market Size by Application
  • 9.2.1 China Aluminum Die Casting Alloys Sales by Application (2020-2031)
  • 9.2.2 China Aluminum Die Casting Alloys Revenue by Application (2020-2031)

10 APEC

• 10.1 APeC Aluminum Die Casting Alloys Market Size by Type
  • 10.1.1 APeC Aluminum Die Casting Alloys Sales by Type (2020-2031)
  • 10.1.2 APeC Aluminum Die Casting Alloys Revenue by Type (2020-2031)
• 10.2 APeC Aluminum Die Casting Alloys Market Size by Application
  • 10.2.1 APeC Aluminum Die Casting Alloys Sales by Application (2020-2031)
  • 10.2.2 APeC Aluminum Die Casting Alloys Revenue by Application (2020-2031)
• 10.3 APeC Aluminum Die Casting Alloys Market Size by Region
  • 10.3.1 APeC Aluminum Die Casting Alloys Revenue by Region: 2020 VS 2024 VS 2031
  • 10.3.2 APeC Aluminum Die Casting Alloys Revenue by Region (2020-2031)
  • 10.3.3 APeC Aluminum Die Casting Alloys Sales by Region (2020-2031)
  • 10.3.4 Japan
  • 10.3.5 India
  • 10.3.6 South Korea
  • 10.3.7 Thailand
  • 10.3.8 Indonesia
  • 10.3.9 Vietnam
  • 10.3.10 Malaysia
  • 10.3.11 China Taiwan

11 MIDDLE EAST, AFRICA AND LATIN AMERICA

• 11.1 Middle East, Africa and Latin America Aluminum Die Casting Alloys Market Size by Type
  • 11.1.1 Middle East, Africa and Latin America Aluminum Die Casting Alloys Sales by Type (2020-2031)
  • 11.1.2 Middle East, Africa and Latin America Aluminum Die Casting Alloys Revenue by Type (2020-2031)
• 11.2 Middle East, Africa and Latin America Aluminum Die Casting Alloys Market Size by Application
  • 11.2.1 Middle East, Africa and Latin America Aluminum Die Casting Alloys Sales by Application (2020-2031)
  • 11.2.2 Middle East, Africa and Latin America Aluminum Die Casting Alloys Revenue by Application (2020-2031)
• 11.3 Middle East, Africa and Latin America Aluminum Die Casting Alloys Market Size by Country
  • 11.3.1 Middle East, Africa and Latin America Aluminum Die Casting Alloys Revenue by Country: 2020 VS 2024 VS 2031
  • 11.3.2 Middle East, Africa and Latin America Aluminum Die Casting Alloys Revenue by Country (2020-2031)
  • 11.3.3 Middle East, Africa and Latin America Aluminum Die Casting Alloys Sales by Country (2020-2031)
  • 11.3.4 Brazil
  • 11.3.5 Turkey
  • 11.3.6 Iran
  • 11.3.7 South Africa
  • 11.3.8 Morocco
  • 11.3.9 Saudi Arabia
  • 11.3.10 Nigeria
  • 11.3.11 Egypt

12 CORPORATE PROFILE

• 12.1 Nemak
  • 12.1.1 Nemak Company Corporation Information
  • 12.1.2 Nemak Main Overview
  • 12.1.3 Nemak Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025)
  • 12.1.4 Nemak Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications
  • 12.1.5 Nemak Aluminum Die Casting Alloys SWOT Analysis
  • 12.1.6 Nemak Recent Developments
• 12.2 Ryobi
  • 12.2.1 Ryobi Company Corporation Information
  • 12.2.2 Ryobi Main Overview
  • 12.2.3 Ryobi Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025)
  • 12.2.4 Ryobi Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications
  • 12.2.5 Ryobi Aluminum Die Casting Alloys SWOT Analysis
  • 12.2.6 Ryobi Recent Developments
• 12.3 CITIC Dicastal
  • 12.3.1 CITIC Dicastal Company Corporation Information
  • 12.3.2 CITIC Dicastal Main Overview
  • 12.3.3 CITIC Dicastal Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025)
  • 12.3.4 CITIC Dicastal Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications
  • 12.3.5 CITIC Dicastal Aluminum Die Casting Alloys SWOT Analysis
  • 12.3.6 CITIC Dicastal Recent Developments
• 12.4 Ahresty
  • 12.4.1 Ahresty Company Corporation Information
  • 12.4.2 Ahresty Main Overview
  • 12.4.3 Ahresty Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025)
  • 12.4.4 Ahresty Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications
  • 12.4.5 Ahresty Aluminum Die Casting Alloys SWOT Analysis
  • 12.4.6 Ahresty Recent Developments
• 12.5 Martinrea
  • 12.5.1 Martinrea Company Corporation Information
  • 12.5.2 Martinrea Main Overview
  • 12.5.3 Martinrea Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025)
  • 12.5.4 Martinrea Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications
  • 12.5.5 Martinrea Aluminum Die Casting Alloys SWOT Analysis
  • 12.5.6 Martinrea Recent Developments
• 12.6 IKD
  • 12.6.1 IKD Company Corporation Information
  • 12.6.2 IKD Main Overview
  • 12.6.3 IKD Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025)
  • 12.6.4 IKD Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications
  • 12.6.5 IKD Aluminum Die Casting Alloys SWOT Analysis
  • 12.6.6 IKD Recent Developments
• 12.7 Wencan Group
  • 12.7.1 Wencan Group Company Corporation Information
  • 12.7.2 Wencan Group Main Overview
  • 12.7.3 Wencan Group Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025)
  • 12.7.4 Wencan Group Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications
  • 12.7.5 Wencan Group Aluminum Die Casting Alloys SWOT Analysis
  • 12.7.6 Wencan Group Recent Developments
• 12.8 Guangdong Hongtu
  • 12.8.1 Guangdong Hongtu Company Corporation Information
  • 12.8.2 Guangdong Hongtu Main Overview
  • 12.8.3 Guangdong Hongtu Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025)
  • 12.8.4 Guangdong Hongtu Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications
  • 12.8.5 Guangdong Hongtu Aluminum Die Casting Alloys SWOT Analysis
  • 12.8.6 Guangdong Hongtu Recent Developments
• 12.9 Handtmann
  • 12.9.1 Handtmann Company Corporation Information
  • 12.9.2 Handtmann Main Overview
  • 12.9.3 Handtmann Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025)
  • 12.9.4 Handtmann Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications
  • 12.9.5 Handtmann Aluminum Die Casting Alloys SWOT Analysis
  • 12.9.6 Handtmann Recent Developments
• 12.10 Aludyne
  • 12.10.1 Aludyne Company Corporation Information
  • 12.10.2 Aludyne Main Overview
  • 12.10.3 Aludyne Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025)
  • 12.10.4 Aludyne Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications
  • 12.10.5 Aludyne Aluminum Die Casting Alloys SWOT Analysis
  • 12.10.6 Aludyne Recent Developments
• 12.11 Pace Industries
  • 12.11.1 Pace Industries Company Corporation Information
  • 12.11.2 Pace Industries Main Overview
  • 12.11.3 Pace Industries Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025)
  • 12.11.4 Pace Industries Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications
  • 12.11.5 Pace Industries Aluminum Die Casting Alloys SWOT Analysis
  • 12.11.6 Pace Industries Recent Developments
• 12.12 Endurance Technologies
  • 12.12.1 Endurance Technologies Company Corporation Information
  • 12.12.2 Endurance Technologies Main Overview
  • 12.12.3 Endurance Technologies Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025)
  • 12.12.4 Endurance Technologies Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications
  • 12.12.5 Endurance Technologies Aluminum Die Casting Alloys SWOT Analysis
  • 12.12.6 Endurance Technologies Recent Developments
• 12.13 Chongqing Millison
  • 12.13.1 Chongqing Millison Company Corporation Information
  • 12.13.2 Chongqing Millison Main Overview
  • 12.13.3 Chongqing Millison Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025)
  • 12.13.4 Chongqing Millison Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications
  • 12.13.5 Chongqing Millison Aluminum Die Casting Alloys SWOT Analysis
  • 12.13.6 Chongqing Millison Recent Developments
• 12.14 Rockman Industries
  • 12.14.1 Rockman Industries Company Corporation Information
  • 12.14.2 Rockman Industries Main Overview
  • 12.14.3 Rockman Industries Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025)
  • 12.14.4 Rockman Industries Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications
  • 12.14.5 Rockman Industries Aluminum Die Casting Alloys SWOT Analysis
  • 12.14.6 Rockman Industries Recent Developments
• 12.15 Georg Fischer
  • 12.15.1 Georg Fischer Company Corporation Information
  • 12.15.2 Georg Fischer Main Overview
  • 12.15.3 Georg Fischer Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025)
  • 12.15.4 Georg Fischer Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications
  • 12.15.5 Georg Fischer Aluminum Die Casting Alloys SWOT Analysis
  • 12.15.6 Georg Fischer Recent Developments
• 12.16 Rheinmetall
  • 12.16.1 Rheinmetall Company Corporation Information
  • 12.16.2 Rheinmetall Main Overview
  • 12.16.3 Rheinmetall Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025)
  • 12.16.4 Rheinmetall Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications
  • 12.16.5 Rheinmetall Aluminum Die Casting Alloys SWOT Analysis
  • 12.16.6 Rheinmetall Recent Developments
• 12.17 Gnutti Carlo
  • 12.17.1 Gnutti Carlo Company Corporation Information
  • 12.17.2 Gnutti Carlo Main Overview
  • 12.17.3 Gnutti Carlo Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025)
  • 12.17.4 Gnutti Carlo Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications
  • 12.17.5 Gnutti Carlo Aluminum Die Casting Alloys SWOT Analysis
  • 12.17.6 Gnutti Carlo Recent Developments
• 12.18 LTH
  • 12.18.1 LTH Company Corporation Information
  • 12.18.2 LTH Main Overview
  • 12.18.3 LTH Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025)
  • 12.18.4 LTH Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications
  • 12.18.5 LTH Aluminum Die Casting Alloys SWOT Analysis
  • 12.18.6 LTH Recent Developments
• 12.19 Jiangsu Rongtai
  • 12.19.1 Jiangsu Rongtai Company Corporation Information
  • 12.19.2 Jiangsu Rongtai Main Overview
  • 12.19.3 Jiangsu Rongtai Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025)
  • 12.19.4 Jiangsu Rongtai Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications
  • 12.19.5 Jiangsu Rongtai Aluminum Die Casting Alloys SWOT Analysis
  • 12.19.6 Jiangsu Rongtai Recent Developments
• 12.20 Nanjing Chervon
  • 12.20.1 Nanjing Chervon Company Corporation Information
  • 12.20.2 Nanjing Chervon Main Overview
  • 12.20.3 Nanjing Chervon Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025)
  • 12.20.4 Nanjing Chervon Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications
  • 12.20.5 Nanjing Chervon Aluminum Die Casting Alloys SWOT Analysis
  • 12.20.6 Nanjing Chervon Recent Developments
• 12.21 Teksid
  • 12.21.1 Teksid Company Corporation Information
  • 12.21.2 Teksid Main Overview
  • 12.21.3 Teksid Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025)
  • 12.21.4 Teksid Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications
  • 12.21.5 Teksid Aluminum Die Casting Alloys SWOT Analysis
  • 12.21.6 Teksid Recent Developments
• 12.22 Ningbo Xusheng
  • 12.22.1 Ningbo Xusheng Company Corporation Information
  • 12.22.2 Ningbo Xusheng Main Overview
  • 12.22.3 Ningbo Xusheng Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025)
  • 12.22.4 Ningbo Xusheng Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications
  • 12.22.5 Ningbo Xusheng Aluminum Die Casting Alloys SWOT Analysis
  • 12.22.6 Ningbo Xusheng Recent Developments
• 12.23 DGS
  • 12.23.1 DGS Company Corporation Information
  • 12.23.2 DGS Main Overview
  • 12.23.3 DGS Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025)
  • 12.23.4 DGS Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications
  • 12.23.5 DGS Aluminum Die Casting Alloys SWOT Analysis
  • 12.23.6 DGS Recent Developments
• 12.24 Guangdong Hongte
  • 12.24.1 Guangdong Hongte Company Corporation Information
  • 12.24.2 Guangdong Hongte Main Overview
  • 12.24.3 Guangdong Hongte Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025)
  • 12.24.4 Guangdong Hongte Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications
  • 12.24.5 Guangdong Hongte Aluminum Die Casting Alloys SWOT Analysis
  • 12.24.6 Guangdong Hongte Recent Developments
• 12.25 Gibbs
  • 12.25.1 Gibbs Company Corporation Information
  • 12.25.2 Gibbs Main Overview
  • 12.25.3 Gibbs Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025)
  • 12.25.4 Gibbs Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications
  • 12.25.5 Gibbs Aluminum Die Casting Alloys SWOT Analysis
  • 12.25.6 Gibbs Recent Developments
• 12.26 Foryou
  • 12.26.1 Foryou Company Corporation Information
  • 12.26.2 Foryou Main Overview
  • 12.26.3 Foryou Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025)
  • 12.26.4 Foryou Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications
  • 12.26.5 Foryou Aluminum Die Casting Alloys SWOT Analysis
  • 12.26.6 Foryou Recent Developments
• 12.27 Form Technologies
  • 12.27.1 Form Technologies Company Corporation Information
  • 12.27.2 Form Technologies Main Overview
  • 12.27.3 Form Technologies Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025)
  • 12.27.4 Form Technologies Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications
  • 12.27.5 Form Technologies Aluminum Die Casting Alloys SWOT Analysis
  • 12.27.6 Form Technologies Recent Developments
• 12.28 Suzhou Yadelin
  • 12.28.1 Suzhou Yadelin Company Corporation Information
  • 12.28.2 Suzhou Yadelin Main Overview
  • 12.28.3 Suzhou Yadelin Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025)
  • 12.28.4 Suzhou Yadelin Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications
  • 12.28.5 Suzhou Yadelin Aluminum Die Casting Alloys SWOT Analysis
  • 12.28.6 Suzhou Yadelin Recent Developments
• 12.29 Ningbo Spey
  • 12.29.1 Ningbo Spey Company Corporation Information
  • 12.29.2 Ningbo Spey Main Overview
  • 12.29.3 Ningbo Spey Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025)
  • 12.29.4 Ningbo Spey Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications
  • 12.29.5 Ningbo Spey Aluminum Die Casting Alloys SWOT Analysis
  • 12.29.6 Ningbo Spey Recent Developments
• 12.30 Sandhar
  • 12.30.1 Sandhar Company Corporation Information
  • 12.30.2 Sandhar Main Overview
  • 12.30.3 Sandhar Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025)
  • 12.30.4 Sandhar Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications
  • 12.30.5 Sandhar Aluminum Die Casting Alloys SWOT Analysis
  • 12.30.6 Sandhar Recent Developments
• 12.31 Eontec
  • 12.31.1 Eontec Company Corporation Information
  • 12.31.2 Eontec Main Overview
  • 12.31.3 Eontec Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025)
  • 12.31.4 Eontec Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications
  • 12.31.5 Eontec Aluminum Die Casting Alloys SWOT Analysis
  • 12.31.6 Eontec Recent Developments
• 12.32 MK Tron
  • 12.32.1 MK Tron Company Corporation Information
  • 12.32.2 MK Tron Main Overview
  • 12.32.3 MK Tron Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025)
  • 12.32.4 MK Tron Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications
  • 12.32.5 MK Tron Aluminum Die Casting Alloys SWOT Analysis
  • 12.32.6 MK Tron Recent Developments
• 12.33 Tatfook
  • 12.33.1 Tatfook Company Corporation Information
  • 12.33.2 Tatfook Main Overview
  • 12.33.3 Tatfook Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025)
  • 12.33.4 Tatfook Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications
  • 12.33.5 Tatfook Aluminum Die Casting Alloys SWOT Analysis
  • 12.33.6 Tatfook Recent Developments

13 INDUSTRY CHAIN AND SALES CHANNELS ANALYSIS

• 13.1 Aluminum Die Casting Alloys Industry Chain Analysis
• 13.2 Aluminum Die Casting Alloys Key Raw Materials
  • 13.2.1 Key Raw Materials
  • 13.2.2 Raw Materials Key Suppliers
• 13.3 Aluminum Die Casting Alloys Production Mode & Process
• 13.4 Aluminum Die Casting Alloys Sales and Marketing
• 13.5 Aluminum Die Casting Alloys Customers

14 ALUMINUM DIE CASTING ALLOYS MARKET DYNAMICS

• 14.1.1 Aluminum Die Casting Alloys Industry Trends
• 14.1.2 Aluminum Die Casting Alloys Market Drivers
• 14.1.3 Aluminum Die Casting Alloys Market Challenges
• 14.1.4 Aluminum Die Casting Alloys Market Restraints

15 KEY FINDINGS IN THE GLOBAL ALUMINUM DIE CASTING ALLOYS STUDY

16 APPENDIX

• 16.1 Research Methodology
  • 16.1.1 Methodology/Research Approach
  • 16.1.2 Data Source
• 16.2 Author Details