자동차 및 운송용 커넥터 시장 규모, 점유율, 성장 분석 : 유형별, 접속 기술별, 용도별, 최종 용도별, 지역별 - 산업 예측(2025-2032년)

Global Automotive and Transportation Connector Market size was valued at USD 13.4 billion in 2023 and is poised to grow from USD 14.07 billion in 2024 to USD 20.79 billion by 2032, growing at a CAGR of 5.0% during the forecast period (2025-2032).

The automotive and transportation connector market is experiencing significant transformation driven by the rise of connected and autonomous vehicles, the electrification trend, and advancements in automotive electronics. The proliferation of smart vehicles has heightened the demand for high-performance connectors that support advanced driver-assistance systems and facilitate high-speed data transfers, requiring the management of robust power supplies. As vehicle electrification demands connectors that can handle elevated voltage levels, the evolution of electronics also necessitates an increased number of sensors, actuators, and infotainment systems, all of which rely on sophisticated connector solutions. However, the growing complexity of vehicle electronics presents challenges for manufacturers regarding technology adaptation and cost management, potentially limiting the market's growth and hindering the integration of cutting-edge connector systems in new automotive designs.

Top-down and bottom-up approaches were used to estimate and validate the size of the Global Automotive and Transportation Connector market and to estimate the size of various other dependent submarkets. The research methodology used to estimate the market size includes the following details: The key players in the market were identified through secondary research, and their market shares in the respective regions were determined through primary and secondary research. This entire procedure includes the study of the annual and financial reports of the top market players and extensive interviews for key insights from industry leaders such as CEOs, VPs, directors, and marketing executives. All percentage shares split, and breakdowns were determined using secondary sources and verified through Primary sources. All possible parameters that affect the markets covered in this research study have been accounted for, viewed in extensive detail, verified through primary research, and analyzed to get the final quantitative and qualitative data.

Global Automotive and Transportation Connector Market Segments Analysis

Global Automotive and Transportation Connector Market is segmented by Type, Connection Technology, Application, End Use and region. Based on Type, the market is segmented into Micro Connectors, Heavy Duty Connectors, Automotive Connectors and Transportation Connectors. Based on Connection Technology, the market is segmented into Wire-to-Wire, Wire-to-Board and Board-to-Board. Based on Application, the market is segmented into HVAC, Interior, Telematics, Powertrain, Body and Chassis. Based on End Use, the market is segmented into Passenger Vehicles, Commercial Vehicles and Public Transportation. Based on region, the market is segmented into North America, Europe, Asia Pacific, Latin America and Middle East & Africa.

Driver of the Global Automotive and Transportation Connector Market

The Global Automotive and Transportation Connector market is experiencing significant growth fueled by the increasing demand for high-speed and reliable data communications alongside efficient power management. As vehicles evolve to become more connected and autonomous, there is a rising need for customized connectors that can support advanced driver-assistance systems, sensors, cameras, and infotainment technologies, particularly in challenging environments. This shift towards smart, safe, and connected vehicles is propelling the need for next-generation connector solutions that ensure seamless connectivity, signal integrity, and durability. Consequently, the connector industry emerges as a crucial catalyst for innovation and transformation within the automotive landscape.

Restraints in the Global Automotive and Transportation Connector Market

The advancement in automotive electronics presents significant challenges for the automotive and transportation connector market, as it requires connectors to support a rising number of functionalities, enhanced data transmission rates, and improved durability. This increasing complexity complicates the design and manufacturing processes. As vehicles adopt more advanced electronic systems, manufacturers face the necessity to create connectors that fulfill stringent performance and reliability criteria. Consequently, this often leads to higher production costs and compatibility issues, which can hinder widespread adoption and restrict market growth, ultimately impacting the overall potential of the sector.

Market Trends of the Global Automotive and Transportation Connector Market

The Global Automotive and Transportation Connector market is experiencing a significant trend driven by the integration of advanced driver-assistance systems (ADAS) and enhanced safety features. As vehicles increasingly rely on high-speed, dependable connectors to facilitate real-time communication among various sensors, cameras, radar, and electronic control units, the demand for connectors that ensure signal integrity and maintain electromagnetic compatibility is on the rise. This shift necessitates connectors that can withstand rigorous conditions such as vibration and temperature variations, supporting critical functions like obstacle detection, lane-keeping, and emergency braking. The growing adoption of compact, high-bandwidth connector solutions is pivotal, enabling seamless communication and efficient power distribution while propelling innovation in vehicle connectivity and safety advancements.

Table of Contents

Introduction

• Objectives of the Study
• Scope of the Report
• Definitions

Research Methodology

• Information Procurement
• Secondary & Primary Data Methods
• Market Size Estimation
• Market Assumptions & Limitations

Executive Summary

• Global Market Outlook
• Supply & Demand Trend Analysis
• Segmental Opportunity Analysis

Market Dynamics & Outlook

• Market Overview
• Market Size
• Market Dynamics
  • Drivers & Opportunities
  • Restraints & Challenges
• Porters Analysis
  • Competitive rivalry
  • Threat of substitute
  • Bargaining power of buyers
  • Threat of new entrants
  • Bargaining power of suppliers

Key Market Insights

• Key Success Factors
• Degree of Competition
• Top Investment Pockets
• Market Ecosystem
• Market Attractiveness Index, 2024
• PESTEL Analysis
• Macro-Economic Indicators
• Value Chain Analysis
• Pricing Analysis
• Case Studies
• Technology Analysis
• Customer Buying Behavior Analysis

Global Automotive and Transportation Connector Market Size by Type & CAGR (2025-2032)

• Market Overview
• Micro Connectors
• Heavy Duty Connectors
• Automotive Connectors
• Transportation Connectors

Global Automotive and Transportation Connector Market Size by Connection Technology & CAGR (2025-2032)

• Market Overview
• Wire-to-Wire
• Wire-to-Board
• Board-to-Board

Global Automotive and Transportation Connector Market Size by Application & CAGR (2025-2032)

• Market Overview
• HVAC
• Interior
• Telematics
• Powertrain
• Body
• Chassis

Global Automotive and Transportation Connector Market Size by End Use & CAGR (2025-2032)

• Market Overview
• Passenger Vehicles
• Commercial Vehicles
• Public Transportation

Global Automotive and Transportation Connector Market Size & CAGR (2025-2032)

• North America (Type, Connection Technology, Application, End Use)
  • US
  • Canada
• Europe (Type, Connection Technology, Application, End Use)
  • Germany
  • Spain
  • France
  • UK
  • Italy
  • Rest of Europe
• Asia Pacific (Type, Connection Technology, Application, End Use)
  • China
  • India
  • Japan
  • South Korea
  • Rest of Asia-Pacific
• Latin America (Type, Connection Technology, Application, End Use)
  • Brazil
  • Rest of Latin America
• Middle East & Africa (Type, Connection Technology, Application, End Use)
  • GCC Countries
  • South Africa
  • Rest of Middle East & Africa

Competitive Intelligence

• Top 5 Player Comparison
• Market Positioning of Key Players, 2024
• Strategies Adopted by Key Market Players
• Recent Developments in the Market
• Company Market Share Analysis, 2024
• Company Profiles of All Key Players
  • Company Details
  • Product Portfolio Analysis
  • Company's Segmental Share Analysis
  • Revenue Y-O-Y Comparison (2022-2024)

Key Company Profiles

• Delphi Technologies
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Fischer Connectors
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Yazaki Corporation
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• TE Connectivity
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• AVX Corporation
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Aptiv PLC
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• LEMO
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Molex
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Conntek
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Sumitomo Electric Industries
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• JST Manufacturing
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Samtec
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Parker Hannifin
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments

Conclusion & Recommendations