항공우주 플라스틱 시장 규모, 점유율, 성장 분석 : 폴리머 유형별, 항공기 유형별, 용도별, 지역별 - 업계 예측(2026-2033년)

Aerospace Plastics Market size was valued at USD 19.29 Billion in 2024 and is poised to grow from USD 20.67 Billion in 2025 to USD 35.83 Billion by 2033, growing at a CAGR of 7.12% during the forecast period (2026-2033).

The aerospace plastics market is evolving rapidly, driven by diverse applications and the rising demand for high-performance, lightweight materials in aircraft manufacturing. Aerospace manufacturers increasingly adopt advanced plastics to enhance fuel efficiency, reduce emissions, and boost overall performance. Environmental sustainability significantly influences market dynamics as scrutiny of the aerospace sector's ecological impact intensifies. Consequently, there is a marked shift towards recyclable and eco-friendly plastics, prompting manufacturers to invest in R&D for materials that offer a sustainable profile while addressing concerns over waste and disposal at the end of their lifecycle. This reflects a broader industry commitment to sustainable production practices. Additionally, ongoing advancements in aerospace polymers focus on enhancing strength, heat resistance, flame retardation, and other critical performance characteristics.

Top-down and bottom-up approaches were used to estimate and validate the size of the Aerospace Plastics market and to estimate the size of various other dependent submarkets. The research methodology used to estimate the market size includes the following details: The key players in the market were identified through secondary research, and their market shares in the respective regions were determined through primary and secondary research. This entire procedure includes the study of the annual and financial reports of the top market players and extensive interviews for key insights from industry leaders such as CEOs, VPs, directors, and marketing executives. All percentage shares split, and breakdowns were determined using secondary sources and verified through Primary sources. All possible parameters that affect the markets covered in this research study have been accounted for, viewed in extensive detail, verified through primary research, and analyzed to get the final quantitative and qualitative data.

Aerospace Plastics Market Segments Analysis

Global Aerospace Plastics Market is segmented by Polymer Type, Aircraft Type, Application, and Region. Based on Polymer Type, the market is segmented into Polyetheretherketone (PEEK), Polyphenyl Sulfide (PPS), Polycarbonate (PC), Acrylonitrile Butadiene Styrene (ABS), Polymethyl Methacrylate (PMMA), Others. Based on Aircraft Type, the market is segmented into Commercial Aircraft, General & Business Aircraft, Military Aircraft, Rotary Aircraft, Others. Based on Application, the market is segmented into Cabin Windows And Windshields, Cabin Lighting, Overhead Storage Bins, Aircraft Panels, Aircraft Canopy, Others. Based on region, the market is segmented into North America, Europe, Asia Pacific, Latin America and Middle East & Africa.

Driver of the Aerospace Plastics Market

A key market driver for the Global Aerospace Plastics Market is the increasing demand for lightweight yet durable materials in aircraft manufacturing. The aerospace industry continuously seeks to enhance fuel efficiency and reduce emissions, prompting manufacturers to replace traditional metal components with advanced plastic composites. These materials not only contribute to weight reduction but also provide resistance to corrosion and fatigue, thus improving overall aircraft performance and lifespan. Additionally, the trend towards eco-friendly and sustainable aviation solutions further propels the adoption of aerospace plastics, as manufacturers aim to meet stringent environmental regulations while maintaining high safety standards.

Restraints in the Aerospace Plastics Market

One of the key market restraints for the global aerospace plastics market is the stringent regulatory environment governing aviation materials. Regulations imposed by aviation authorities require rigorous testing and certification processes for materials used in aircraft manufacturing, which can complicate the approval of new plastic compounds. These standards are mostly focused on ensuring safety, reliability, and performance under extreme conditions; however, they can also slow down innovation and increase costs. Additionally, manufacturers might face challenges in meeting these regulations while trying to balance the demand for lightweight materials and sustainability, ultimately hindering market growth and expansion opportunities.

Market Trends of the Aerospace Plastics Market

The aerospace plastics market is increasingly experiencing a shift towards lightweight materials, driven by the industry's relentless pursuit of performance enhancement and fuel efficiency. Manufacturers are under significant pressure to innovate advanced plastics, including composites and thermoplastics, which not only reduce aircraft weight but also contribute to improved overall performance. This trend aligns with broader sustainability goals, as lighter aircraft consume less fuel, thereby decreasing operational costs and carbon emissions. As airlines and manufacturers prioritize eco-friendly and cost-effective solutions, investment in advanced lightweight plastics is likely to intensify, shaping the future landscape of aerospace materials.

Table of Contents

Introduction

• Objectives of the Study
• Definitions
• Market Scope

Research Methodology

• Information Procurement
• Secondary & Primary Data Sources
• Market Size Estimation
• Market Assumptions & Limitations

Executive Summary

• Market Overview Outlook
• Supply Demand Trend Analysis
• Segmental Opportunity Analysis

Market Dynamics & Outlook

• Market Dynamics
  • Drivers
  • Opportunities
  • Restraints
  • Challenges
• Porters Analysis
  • Competitive rivalry
  • Threat of Substitute Products
  • Bargaining Power of Buyers
  • Threat of New Entrants
  • Bargaining Power of Suppliers

Key Market Insights

• Key Success Factor
• Degree of Competition
• Top Investment Pockets
• Ecosystem of the Market
• Regulatory Landscape
• Technology Analysis
• Value Chain Analysis

Aerospace Plastics Market, By Polymer Type

• Market Overview
• Polyetheretherketone (PEEK)
• Polyphenyl Sulfide (PPS)
• Polycarbonate (PC)
• Acrylonitrile Butadiene Styrene (ABS)
• Polymethyl Methacrylate (PMMA)
• Others

Aerospace Plastics Market, By Aircraft Type

• Market Overview
• Commercial Aircraft
• General & Business Aircraft
• Military Aircraft
• Rotary Aircraft
• Others

Aerospace Plastics Market, By Application

• Market Overview
• Cabin Windows And Windshields
• Cabin Lighting
• Overhead Storage Bins
• Aircraft Panels
• Aircraft Canopy
• Others

Aerospace Plastics Market Size by Region

• Market Overview
• North America
  • USA
  • Canada
• Europe
  • Germany
  • Spain
  • France
  • UK
  • Italy
  • Rest of Europe
• Asia Pacific
  • China
  • India
  • Japan
  • South Korea
  • Rest of Asia-Pacific
• Latin America
  • Brazil
  • Rest of Latin America
• Middle East & Africa (MEA)
  • GCC Countries
  • South Africa
  • Rest of MEA

Competitive Landscape

• Top 5 Player Comparison
• Market Positioning of Key Players, 2025
• Strategies Adopted by Key Market Players
• Recent Activities in the Market
• Key Companies Market Share (%), 2025

Key Company Profiles

• Sabic
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Victrex
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Drake Plastics Ltd
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Solvay
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• BASF SE
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Evonik Industries AG
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Vantage Plane Plastics
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Quadrant Engineering Plastics
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• PACO Plastics & Engineering Inc.
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• 3P - Performance Plastics Products
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Polyflour Plastics
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Big Bear Plastics
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Grafix Plastics
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Zeus
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Curbell Plastics
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Ensinger GmbH
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Mitsubishi Chemical Corporation
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Toray Industries, Inc.
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Saint-Gobain
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• RTP Company
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Celanese Corporation
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments