인쇄회로기판 설계 소프트웨어 시장 규모, 점유율 및 성장 분석 : 컴포넌트별, 기술별, 도입 형태별, 용도별, 지역별 - 업계 예측(2026-2033년)

PCB Design Software Market size was valued at USD 4.31 Billion in 2024 and is poised to grow from USD 4.53 Billion in 2025 to USD 6.8 Billion by 2033, growing at a CAGR of 5.2% during the forecast period (2026-2033).

The growth of the PCB design software market is significantly influenced by rapid technological advancements in the electronics industry. As electronic devices become increasingly complex, the demand for sophisticated design tools grows. PCB design software incorporates features such as 3D modeling, simulation, and automated routing, allowing engineers to create intricate circuit layouts with enhanced accuracy and efficiency. Additionally, the rising trend towards miniaturization of electronic devices necessitates compact and efficient PCB designs. Advanced layout optimization tools within PCB design software enable designers to achieve compact circuit configurations while ensuring high performance and reliability. Consequently, manufacturers are increasingly adopting these software solutions to streamline their design processes, maintain competitiveness, and effectively respond to market demands for smaller, portable devices.

Top-down and bottom-up approaches were used to estimate and validate the size of the PCB Design Software market and to estimate the size of various other dependent submarkets. The research methodology used to estimate the market size includes the following details: The key players in the market were identified through secondary research, and their market shares in the respective regions were determined through primary and secondary research. This entire procedure includes the study of the annual and financial reports of the top market players and extensive interviews for key insights from industry leaders such as CEOs, VPs, directors, and marketing executives. All percentage shares split, and breakdowns were determined using secondary sources and verified through Primary sources. All possible parameters that affect the markets covered in this research study have been accounted for, viewed in extensive detail, verified through primary research, and analyzed to get the final quantitative and qualitative data.

PCB Design Software Market Segments Analysis

Global PCB Design Software Market is segmented by Component, Technology, Deployment Mode, Application and region. Based on Component, the market is segmented into Software/Tools and Services. Based on Technology, the market is segmented into High-end Software, Mainstream Software and Low-end Software. Based on Deployment Mode, the market is segmented into Cloud and On-Premises. Based on Application, the market is segmented into Computer &Consumer Electronics, Telecommunication Equipment, Medical Devices, Industrial Equipment, Automotive Components and Others. Based on region, the market is segmented into North America, Europe, Asia Pacific, Latin America and Middle East & Africa.

Driver of the PCB Design Software Market

The increasing demand for lightweight and compact electronic devices has significantly fueled the need for high-density printed circuit boards (PCBs). As manufacturers strive to create smaller products, PCB design software has become essential for designers, allowing them to optimize layouts and effectively manage signal interference while maximizing the number of components that fit into constrained spaces. This software not only aids in the design process but also aligns with the industry's focus on miniaturization and high-density configurations, driving its widespread adoption throughout the electronics sector. Consequently, the evolution of consumer preferences for portable devices continues to propel the growth of PCB design software solutions.

Restraints in the PCB Design Software Market

The PCB design software market faces significant challenges due to the dynamic nature of the electronic design industry, which is subject to regular updates in design standards and specifications. To remain relevant, software solutions must continuously evolve and adapt to these changes. If they fail to do so, it may hinder their adoption among designers who seek tools that can integrate effortlessly with the latest industry requirements and best practices. Consequently, the capacity of PCB design software to efficiently respond to and incorporate these rapidly evolving standards is essential for achieving broader acceptance and success in the market.

Market Trends of the PCB Design Software Market

The PCB Design Software market is witnessing a significant trend toward the integration of Product Lifecycle Management (PLM) systems, revolutionizing the approach to circuit design within the electronics and semiconductor sectors. This synergy fosters a holistic and transparent management of product data across the entire lifecycle, enhancing innovation by seamlessly incorporating advancements in technology. As a result, PCB design processes are becoming more streamlined, enabling efficient documentation, design revisions, and manufacturing workflows. Furthermore, engineers benefit from advanced simulation capabilities, allowing for performance assessments under varied conditions, ultimately leading to higher-quality products and reduced time-to-market in a competitive landscape.

Table of Contents

Introduction

• Objectives of the Study
• Scope of the Report
• Definitions

Research Methodology

• Information Procurement
• Secondary & Primary Data Methods
• Market Size Estimation
• Market Assumptions & Limitations

Executive Summary

• Global Market Outlook
• Supply & Demand Trend Analysis
• Segmental Opportunity Analysis

Market Dynamics & Outlook

• Market Overview
• Market Size
• Market Dynamics
  • Drivers & Opportunities
  • Restraints & Challenges
• Porters Analysis
  • Competitive rivalry
  • Threat of substitute
  • Bargaining power of buyers
  • Threat of new entrants
  • Bargaining power of suppliers

Key Market Insights

• Key Success Factors
• Degree of Competition
• Top Investment Pockets
• Market Ecosystem
• Market Attractiveness Index, 2025
• PESTEL Analysis
• Macro-Economic Indicators
• Value Chain Analysis
• Pricing Analysis
• Regulatory Landscape
• Case Studies
• Technological Advancement

Global PCB Design Software Market Size by Component & CAGR (2026-2033)

• Market Overview
• Software/Tools
  • PCB CAM
  • PCB SPICE
  • Cable/Wire Harness
  • PCB Analysis Tools
  • PCB AI
• Services

Global PCB Design Software Market Size by Technology & CAGR (2026-2033)

• Market Overview
• High-end Software
• Mainstream Software
• Low-end Software

Global PCB Design Software Market Size by Deployment Mode & CAGR (2026-2033)

• Market Overview
• Cloud
• On-Premises

Global PCB Design Software Market Size by Application & CAGR (2026-2033)

• Market Overview
• Computer & Consumer Electronics
• Telecommunication Equipment
• Medical Devices
• Industrial Equipment
• Automotive Components
• Others

Global PCB Design Software Market Size & CAGR (2026-2033)

• North America (Component, Technology, Deployment Mode, Application)
  • US
  • Canada
• Europe (Component, Technology, Deployment Mode, Application)
  • Germany
  • Spain
  • France
  • UK
  • Italy
  • Rest of Europe
• Asia Pacific (Component, Technology, Deployment Mode, Application)
  • China
  • India
  • Japan
  • South Korea
  • Rest of Asia-Pacific
• Latin America (Component, Technology, Deployment Mode, Application)
  • Brazil
  • Rest of Latin America
• Middle East & Africa (Component, Technology, Deployment Mode, Application)
  • GCC Countries
  • South Africa
  • Rest of Middle East & Africa

Competitive Intelligence

• Top 5 Player Comparison
• Market Positioning of Key Players, 2025
• Strategies Adopted by Key Market Players
• Recent Developments in the Market
• Company Market Share Analysis, 2025
• Company Profiles of All Key Players
  • Company Details
  • Product Portfolio Analysis
  • Company's Segmental Share Analysis
  • Revenue Y-O-Y Comparison (2023-2025)

Key Company Profiles

• Cadence Design Systems (United States)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• WestDev Ltd (United Kingdom)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Zuken Inc (Japan)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Autodesk Inc (United States)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Ansys Inc (United States)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Synopsys Inc (United States)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• ExpressPCB (United States)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• DipTrace (Novarm Limited) (Ukraine)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• KiCad (Open Source)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Fritzing (Germany)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Proteus Design Suite (Labcenter Electronics) (United Kingdom)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• EasyEDA (China)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• DesignSpark PCB (United Kingdom)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Target 3001! (Germany)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• CircuitMaker (Altium) (United States)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• PADS (Siemens EDA) (United States)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• TINA Design Suite (DesignSoft) (Hungary)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments

Conclusion & Recommendations