금속 사출성형 시장 규모, 점유율 및 성장 분석 : 재료 유형별, 최종 이용 산업별, 지역별 - 업계 예측(2026-2033년)

Global Metal Injection Molding Market size was valued at USD 5 Billion in 2024 and is poised to grow from USD 5.56 Billion in 2025 to USD 13.01 Billion by 2033, growing at a CAGR of 11.2% during the forecast period (2026-2033).

The global metal injection molding (MIM) industry is witnessing significant expansion driven by heightened demand for intricate small components across electronics and healthcare sectors. MIM facilitates the creation of complex, high-precision parts, enhancing product functionality while allowing for streamlined designs. The automotive sector's push for lighter components further spurs growth, as manufacturers seek to optimize fuel efficiency and battery performance in electric vehicles. Medical and dental markets are increasingly leveraging MIM for customized implants and surgical tools. Additionally, the appeal of cost-effective mass production is drawing industries that require precision metal parts. Companies are heavily investing in automation and AI technologies to further lower production costs while ensuring superior quality, positioning MIM as a key player in multiple sectors.

Top-down and bottom-up approaches were used to estimate and validate the size of the Global Metal Injection Molding market and to estimate the size of various other dependent submarkets. The research methodology used to estimate the market size includes the following details: The key players in the market were identified through secondary research, and their market shares in the respective regions were determined through primary and secondary research. This entire procedure includes the study of the annual and financial reports of the top market players and extensive interviews for key insights from industry leaders such as CEOs, VPs, directors, and marketing executives. All percentage shares split, and breakdowns were determined using secondary sources and verified through Primary sources. All possible parameters that affect the markets covered in this research study have been accounted for, viewed in extensive detail, verified through primary research, and analyzed to get the final quantitative and qualitative data.

Global Metal Injection Molding Market Segments Analysis

Global Metal Injection Molding Market is segmented by Material Type, End-Use Industry and region. Based on Material Type, the market is segmented into Stainless Steel, Low Alloy Steel, Soft Magnetic Material and Others. Based on End-Use Industry, the market is segmented into Medical & Orthodontics, Electrical & Electronics, Automotive, Industrial, Consumer Products, Firearms & Defense and Others. Based on region, the market is segmented into North America, Europe, Asia Pacific, Latin America and Middle East & Africa.

Driver of the Global Metal Injection Molding Market

The Global Metal Injection Molding market is significantly propelled by the increasing need for complex and compact metal parts in various sectors, including medical devices, consumer electronics, and automotive. Metal injection molding (MIM) facilitates the creation of high-precision components featuring intricate geometries that conventional machining or casting methods struggle to achieve. In the medical industry, for example, MIM plays a vital role in the production of surgical instruments, orthopedic implants, and dental brackets, owing to its capability to fabricate robust components with outstanding surface finishes. This demand for precision and efficiency across diverse applications continues to fuel the growth of the market.

Restraints in the Global Metal Injection Molding Market

The Global Metal Injection Molding (MIM) market faces significant constraints primarily due to the substantial initial investment required for the technology. This encompasses the expense associated with specialized equipment, tooling, and high-quality material costs, which can be particularly burdensome for small and medium-sized manufacturers. The financial outlay for high-purity metal powders and binders, combined with the necessity for meticulous control over the sintering process, further exacerbates the challenges, rendering the technology less achievable for companies operating within tighter financial parameters. Consequently, the affordability and accessibility of MIM technology remain key obstacles for a segment of potential market participants.

Market Trends of the Global Metal Injection Molding Market

The Global Metal Injection Molding (MIM) market is experiencing a significant trend towards the integration of artificial intelligence (AI) and machine learning technologies. These innovations are transforming various aspects of MIM manufacturing, particularly in quality control, predictive maintenance, and process optimization. AI-driven systems facilitate real-time data analysis, enabling manufacturers to swiftly identify defects, fine-tune production parameters, and reduce waste. Furthermore, AI-powered simulations are advancing material selection by accurately predicting the behavior of different metal powders during the sintering process, ultimately enhancing product quality. This technological shift represents a pivotal evolution in MIM, fostering efficiency and precision in the production landscape.

Table of Contents

Introduction

• Objectives of the Study
• Scope of the Report
• Definitions

Research Methodology

• Information Procurement
• Secondary & Primary Data Methods
• Market Size Estimation
• Market Assumptions & Limitations

Executive Summary

• Global Market Outlook
• Supply & Demand Trend Analysis
• Segmental Opportunity Analysis

Market Dynamics & Outlook

• Market Overview
• Market Size
• Market Dynamics
  • Drivers & Opportunities
  • Restraints & Challenges
• Porters Analysis
  • Competitive rivalry
  • Threat of substitute
  • Bargaining power of buyers
  • Threat of new entrants
  • Bargaining power of suppliers

Key Market Insights

• Key Success Factors
• Degree of Competition
• Top Investment Pockets
• Market Ecosystem
• Market Attractiveness Index, 2025
• PESTEL Analysis
• Macro-Economic Indicators
• Value Chain Analysis
• Pricing Analysis
• Case Studies

Global Metal Injection Molding Market Size by Material Type & CAGR (2026-2033)

• Market Overview
• Stainless Steel
• Low Alloy Steel
• Soft Magnetic Material
• Others

Global Metal Injection Molding Market Size by End-Use Industry & CAGR (2026-2033)

• Market Overview
• Medical & Orthodontics
• Electrical & Electronics
• Automotive
• Industrial
• Consumer Products
• Firearms & Defense
• Others

Global Metal Injection Molding Market Size & CAGR (2026-2033)

• North America (Material Type, End-Use Industry)
  • US
  • Canada
• Europe (Material Type, End-Use Industry)
  • Germany
  • Spain
  • France
  • UK
  • Italy
  • Rest of Europe
• Asia Pacific (Material Type, End-Use Industry)
  • China
  • India
  • Japan
  • South Korea
  • Rest of Asia-Pacific
• Latin America (Material Type, End-Use Industry)
  • Brazil
  • Rest of Latin America
• Middle East & Africa (Material Type, End-Use Industry)
  • GCC Countries
  • South Africa
  • Rest of Middle East & Africa

Competitive Intelligence

• Top 5 Player Comparison
• Market Positioning of Key Players, 2025
• Strategies Adopted by Key Market Players
• Recent Developments in the Market
• Company Market Share Analysis, 2025
• Company Profiles of All Key Players
  • Company Details
  • Product Portfolio Analysis
  • Company's Segmental Share Analysis
  • Revenue Y-O-Y Comparison (2023-2025)

Key Company Profiles

• Indo-MIM Pvt. Ltd. (India)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• ARC Group Worldwide Inc. (US)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• CMG Technologies (UK)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Parmaco Metal Injection Molding AG (Switzerland)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Smith Metal Products (US)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• OptiMIM (US)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Advanced Powder Products Inc. (US)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Dean Group International (UK)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• FloMet LLC (US)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• MIM International (US)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Catalus Corporation (US)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Nippon Piston Ring Co. Ltd. (Japan)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• PSM Industries Inc. (US)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Makuta Technics Inc. (US)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Kinetics Climax Inc. (US)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Magnetic Products & Services Inc. (US)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• FineMIM (China)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Innovus Power Inc. (US)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments

Conclusion & Recommendations