코팅 장비 시장 규모, 점유율 및 성장 분석 : 유형별, 최종 용도 산업별, 지역별 - 업계 예측(2026-2033년)

Coating Equipment Market size was valued at USD 19.06 Billion in 2024 and is poised to grow from USD 20.09 Billion in 2025 to USD 30.59 Billion by 2033, growing at a CAGR of 5.4% during the forecast period (2026-2033).

The coating equipment market is poised for considerable growth, bolstered by rising demand in sectors like aerospace, automotive, and construction. Although the market faced setbacks due to the COVID-19 pandemic, recovery is gaining momentum as economic conditions stabilize. A significant driver of this growth is the escalating demand for electric vehicles, where coatings are essential for protecting surfaces from rust and enhancing aesthetics. Additionally, government initiatives promoting electric vehicles, such as subsidies for charging station installations and investments in battery technology, further support market expansion. However, the high cost of advanced coating equipment poses challenges, as their specialized applications and limited capacities make them less economically viable, while low-cost alternatives like brushes and rollers may constrain market potential in specific areas.

Top-down and bottom-up approaches were used to estimate and validate the size of the Coating Equipment market and to estimate the size of various other dependent submarkets. The research methodology used to estimate the market size includes the following details: The key players in the market were identified through secondary research, and their market shares in the respective regions were determined through primary and secondary research. This entire procedure includes the study of the annual and financial reports of the top market players and extensive interviews for key insights from industry leaders such as CEOs, VPs, directors, and marketing executives. All percentage shares split, and breakdowns were determined using secondary sources and verified through Primary sources. All possible parameters that affect the markets covered in this research study have been accounted for, viewed in extensive detail, verified through primary research, and analyzed to get the final quantitative and qualitative data.

Coating Equipment Market Segments Analysis

Global Coating Equipment Market is segmented by Type, End-use Industry and region. Based on Type, the market is segmented into Powder coating equipment, Liquid coating equipment, Specialty coating equipment. Based on End-use Industry, the market is segmented into Automotive & Transportation, Aerospace, Industrial, Building & Infrastructure. Based on region, the market is segmented into North America, Europe, Asia Pacific, Latin America and Middle East & and Africa.

Driver of the Coating Equipment Market

A major catalyst for growth in the coating equipment market is the rising focus on sustainability and stricter environmental regulations. As awareness of the negative environmental effects of conventional coating techniques expands, there is a noticeable transition towards eco-friendly and low-VOC (volatile organic compound) alternatives. This trend is fueling the demand for sophisticated coating equipment that facilitates the effective application of these environmentally conscious solutions. In response, manufacturers are channeling investments into cutting-edge technologies and equipment that promote sustainable coating practices, aligning with the changing preferences of consumers and the evolving landscape of regulatory standards.

Restraints in the Coating Equipment Market

A significant challenge for the coating equipment market is the presence of low-cost alternatives, such as brushes and rollers. These traditional methods provide a more affordable solution for various applications, leading to their continued use despite the advanced features offered by high-end coating equipment. The higher prices and limited capacity of sophisticated tools often deter users, particularly in scenarios where precision is not a priority. This affordability issue restricts the expansion of the coating equipment market, particularly within price-sensitive segments, making it difficult for manufacturers to distinguish their products and demonstrate the value of a higher investment.

Market Trends of the Coating Equipment Market

A prominent trend in the coating equipment market is the rising integration of automated and robotic systems into coating processes. These advanced technologies enhance operational efficiency by delivering precise application and minimizing material waste while also promoting enhanced worker safety. Manufacturers are increasingly investing in sophisticated robotic solutions that leverage sensors, artificial intelligence, and machine learning to refine coating applications, resulting in higher productivity and consistent quality. This shift towards automation is fueled by the demand for cost-effective and efficient coating solutions, particularly in sectors such as automotive, aerospace, and electronics, where rapid production and superior finishes are critical.

Table of Contents

Introduction

• Objectives of the Study
• Scope of the Report
• Definitions

Research Methodology

• Information Procurement
• Secondary & Primary Data Methods
• Market Size Estimation
• Market Assumptions & Limitations

Executive Summary

• Global Market Outlook
• Supply & Demand Trend Analysis
• Segmental Opportunity Analysis

Market Dynamics & Outlook

• Market Overview
• Market Size
• Market Dynamics
  • Driver & Opportunities
  • Restraints & Challenges
• Porters Analysis & Impact
  • Competitive rivalry
  • Threat of substitute
  • Bargaining power of buyers
  • Threat of new entrants
  • Bargaining power of suppliers

Key Market Insights

• Key Success Factors
• Degree of Competition
• Top Investment Pockets
• Market Ecosystem
• Market Attractiveness Index, 2025
• PESTEL Analysis
• Macro-Economic Indicators
• Value Chain Analysis
• Pricing Analysis
• Technological Advancement
• Regulatory Landscape
• Case Studies
• Customer & Buying Criteria Analysis
• Trade Analysis
• Raw Material Analysis

Global Coating Equipment Market Size by Type & CAGR (2026-2033)

• Market Overview
• Powder coating equipment
• Liquid coating equipment
• Specialty coating equipment

Global Coating Equipment Market Size by End-use Industry & CAGR (2026-2033)

• Market Overview
• Automotive & Transportation
• Aerospace
• Industrial
• Building & Infrastructure
• Others

Global Coating Equipment Market Size & CAGR (2026-2033)

• North America, (Type, End-use Industry)
  • US
  • Canada
• Europe, (Type, End-use Industry)
  • UK
  • Germany
  • Spain
  • France
  • Italy
  • Rest of Europe
• Asia-Pacific, (Type, End-use Industry)
  • China
  • India
  • Japan
  • South Korea
  • Rest of Asia Pacific
• Latin America, (Type, End-use Industry)
  • Brazil
  • Rest of Latin America
• Middle East & Africa, (Type, End-use Industry)
  • GCC Countries
  • South Africa
  • Rest of Middle East & Africa

Competitive Intelligence

• Top 5 Player Comparison
• Market Positioning of Key Players, 2025
• Strategies Adopted by Key Market Players
• Recent Developments in the Market
• Company Market Share Analysis, 2025
• Company Profiles of All Key Players
  • Company Details
  • Product Portfolio Analysis
  • Company's Segmental Share Analysis
  • Revenue Y-O-Y Comparison (2021-2023)

Key Company Profiles

• IHI Corporation
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• AJA International
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Anest Iwata Corporation
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Asahi Sunac Corporation
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Axalta Coating Systems
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Blosch AG
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Buhler AG
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Carlisle Companies
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• CVD Equipment Corporation
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Exel Industries
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Fujimi Corporation
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Gema USA Inc.
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Graco Inc.
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Guangdong HuiCheng Vacuum Technology Co., Ltd.
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Kolzer SRL
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Miba AG
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Nordson Corporation
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• OC Oerlikon Management AG
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• PVD Products Inc.
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• ULVAC Inc.
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments

Conclusion & Recommendation