세계 승용차용 클러치 플레이트 시장 : 산업규모, 점유율, 동향, 기회 예측 - 유형별, 수요 분류별, 지역별, 경쟁(2018-2028년)

Global Automotive Passenger Car Clutch Plate Market has valued at USD 3 Billion in 2022 and is anticipated to project robust growth in the forecast period with a CAGR of 8.8% through 2028. A motorized mechanism called a clutch is used to disconnect and reconnect the power transmission from one driven shaft to another. The automotive clutch, which transfers power between two shafts, is a crucial component of the automobile. The engine and manual transmission are connected and disconnected by an automobile clutch. Since an automobile's engine rotates constantly when the vehicle is in motion, the wheel must be removed to provide a systematic balance between the rotating engine and the stationary gearbox. Additionally, the motor and wheels can be disconnected using clutches. Over the projection period, it is anticipated that the rise in urbanization and the rising demand for advancement in the vehicle sector will fuel demand for automotive clutches. The market's expansion is predicted to be fueled by the availability of torque converters with automatic transmissions as an alternative to low-cost manual transmission clutches. Additionally, the market is anticipated to be driven by rising consumer preference for more practical modes of transportation and rising demand for passenger automobiles in emerging nations. The market's expansion is expected to be hampered by factors including the torque converter's replacement of the manual clutch in automatic transmission systems and the low fuel efficiency of automobiles using automotive clutches.

Key Market Drivers

Increasing Global Automotive Production and Sales

One of the primary drivers of the Global Automotive Passenger Car Clutch Plate Market is the continuous growth in global automotive production and sales. The automotive industry is a cornerstone of the global economy, and the demand for passenger cars continues to rise. The production of passenger cars has been steadily increasing over the years. Emerging markets in Asia, Latin America, and Africa are witnessing a surge in demand for vehicles as their economies develop and urbanization accelerates. Established markets in North America and Europe also contribute significantly to global production. As a result, the demand for automotive components, including clutch plates, is on the rise to meet the needs of this expanding automotive sector. Developing economies are becoming major growth hubs for passenger car sales. Rising disposable incomes, improved infrastructure, and changing consumer preferences are driving higher car ownership rates in these regions. China, India, Brazil, and Southeast Asian countries are notable examples of markets where passenger car sales have been booming. This sales growth translates into increased demand for automotive clutch plates to support the production of these vehicles.

Technological Advancements in Automotive Clutch Systems

Another significant driver is the continuous technological advancements in automotive clutch systems. Clutch plates are integral components of these systems, and innovations are improving their performance, durability, and efficiency. Technological advancements have given rise to dual-clutch transmissions and automated manual transmissions, which offer smoother gear changes and enhanced fuel efficiency compared to traditional manual transmissions. These advanced transmission systems require high-performance clutch plates designed to handle the increased demands of modern passenger cars. Advancements in materials science and manufacturing techniques have led to the development of clutch plates that are lighter, more durable, and capable of handling higher torque loads. Materials like carbon composites and advanced friction materials are being used to improve clutch plate performance and longevity.

Stringent Emission Regulations and Fuel Efficiency Demands

Global efforts to reduce carbon emissions and improve fuel efficiency are compelling automotive manufacturers to design vehicles with more efficient powertrains. This drive toward sustainability and regulatory compliance is a significant driver of the Automotive Passenger Car Clutch Plate Market. Governments worldwide are imposing increasingly stringent emissions regulations on passenger cars to combat air pollution and mitigate climate change. To meet these standards, automakers are investing in technologies like hybrid powertrains, start-stop systems, and downsized engines. Clutch plates play a vital role in these systems by transmitting power efficiently, making them essential components for emission compliance. Consumers are also demanding more fuel-efficient vehicles to reduce operating costs and environmental impact. Automotive clutch plates, by optimizing power transfer and reducing energy losses, contribute to improved fuel efficiency. As a result, automakers are adopting advanced clutch plate designs to align with these market demands.

Growing Adoption of Electric and Hybrid Vehicles

The global shift towards electric and hybrid vehicles is another significant driver impacting the Automotive Passenger Car Clutch Plate Market. As the automotive industry experiences a transformative transition away from traditional internal combustion engines, clutch plates are evolving to meet the needs of electric and hybrid powertrains. Electric vehicles, powered solely by batteries, rely on clutches for various functions such as engaging and disengaging the electric motor from the drivetrain. Clutch plates in EVs need to handle high torque levels efficiently while ensuring smooth power delivery, which requires specialized designs. Hybrid vehicles combine both internal combustion engines and electric propulsion systems. Clutch plates in hybrid vehicles play a critical role in managing the transition between electric and gasoline power sources, contributing to overall efficiency and smooth operation. The growing popularity of hybrid technology is increasing the demand for clutch plates designed to operate seamlessly in these vehicles.

Expansion of Emerging Markets and Urbanization

The expansion of emerging markets and rapid urbanization are driving the demand for passenger cars and, subsequently, automotive clutch plates. This trend is particularly prominent in Asia, Latin America, and Africa. Emerging economies are experiencing robust economic growth, leading to higher disposable incomes and increased consumer purchasing power. As a result, more individuals can afford passenger cars, contributing to the growth of the automotive sector in these regions. The need for efficient and reliable clutch plates to support this growth is evident. Rapid urbanization is resulting in higher population densities in cities, leading to increased traffic congestion. In such environments, passenger cars remain a popular choice for commuting. Consequently, the demand for vehicles equipped with efficient clutch systems, including clutch plates, is on the rise. Additionally, the need for start-stop systems in urban traffic further emphasizes the importance of clutch plates in modern vehicles.

Key Market Challenges

Shift Towards Automatic Transmissions

One of the primary challenges facing the Automotive Passenger Car Clutch Plate Market is the ongoing shift towards automatic transmissions, which are increasingly preferred by consumers globally. Automatic transmissions offer a more convenient and user-friendly driving experience compared to manual transmissions, where clutch plates play a pivotal role. This shift presents several challenges for clutch plate manufacturers and the industry as a whole: Consumers, especially in urban areas, prefer vehicles with automatic transmissions due to their ease of use, especially in heavy traffic. As automatic transmissions become more fuel-efficient and cost-effective, they are gradually replacing manual transmissions in passenger cars. This trend reduces the demand for traditional clutch plates used in manual transmissions.

Clutch plate manufacturers face the challenge of adapting to the changing landscape by diversifying their product offerings to include clutch plates for automatic transmissions. However, this can be a costly endeavor, as it requires research, development, and retooling of production facilities. Additionally, manufacturers risk creating redundancies in their product lines as they cater to both manual and automatic transmissions, potentially affecting economies of scale.

The shift towards automatic transmissions also impacts the workforce. Skilled manual transmission technicians may need retraining to work on automatic transmission systems. This shift in skill requirements can lead to labor challenges and the need for investment in training programs.

Increasing Electrification of Passenger Cars

The growing electrification of passenger cars poses another significant challenge for the Automotive Passenger Car Clutch Plate Market. Electric vehicles (EVs) and hybrid vehicles are gaining popularity, and they do not use traditional clutch plates. This transition to electrified powertrains brings about several challenges

Electric vehicles operate on a different principle than internal combustion engine (ICE) vehicles, eliminating the need for clutch plates altogether. This shift means that a portion of the market that was traditionally reliant on clutch plates is shrinking, leading to decreased demand.

Clutch plate manufacturers need to adapt to this trend by diversifying their product portfolios to include components specific to electric and hybrid powertrains. This may involve producing other components for EVs or developing entirely new products. Transitioning to these emerging segments may require significant investments in research and development.

The shift towards electrification introduces uncertainty into the market. As the market share of electric and hybrid vehicles grows, it becomes challenging for manufacturers to predict the future demand for traditional clutch plates accurately. This uncertainty can affect production planning and inventory management.

Increasing Pressure to Improve Fuel Efficiency and Reduce Emissions

Stricter global emissions standards and heightened environmental concerns are driving automakers to improve fuel efficiency and reduce emissions in passenger cars. While this drive towards sustainability aligns with broader environmental goals, it poses specific challenges for clutch plate manufacturers To improve fuel efficiency, automakers are developing vehicles with advanced transmission technologies that reduce the need for clutch engagement. For instance, many modern vehicles incorporate start-stop systems and dual-clutch transmissions that minimize clutch usage during idling or shifting. This reduced clutch engagement means that clutch plates experience less wear and tear and have a longer service life. While longer-lasting clutch plates are advantageous for consumers, they present challenges for manufacturers. The demand for replacement clutch plates decreases due to their extended lifespan. This situation can affect aftermarket sales, which are a significant source of revenue for clutch plate manufacturers. To remain competitive and meet the demand for more efficient clutches, manufacturers must innovate. This involves developing clutch plates with lower friction coefficients and improved heat resistance to enhance fuel efficiency. However, innovation requires substantial investments in research and development.

Fluctuating Raw Material Prices

The Automotive Passenger Car Clutch Plate Market is susceptible to fluctuations in raw material prices, particularly metals like steel. Clutch plates are typically made of steel, and variations in steel prices can impact production costs and profit margins. Several challenges arise from these fluctuations:

Fluctuating raw material prices can result in unpredictable production costs. When steel prices rise, manufacturing clutch plates becomes more expensive, potentially reducing profit margins for manufacturers. This cost variability makes it challenging to set competitive prices for clutch plates.

Global events, such as trade disputes or natural disasters, can disrupt the supply chain for steel and other raw materials used in clutch plate production. These disruptions can lead to shortages, production delays, and increased costs. Maintaining stable and cost-effective supplier relationships is crucial for clutch plate manufacturers. Developing strategic partnerships with suppliers can help mitigate the impact of raw material price fluctuations. However, the negotiation and management of these relationships can be complex.

Key Market Trends

Transition to Lightweight Materials

One prominent trend in the Automotive Passenger Car Clutch Plate Market is the transition to lightweight materials in clutch plate design. This shift is driven by the automotive industry's broader focus on improving fuel efficiency, reducing emissions, and enhancing vehicle performance. The use of lightweight materials in clutch plates offers several advantages: Clutch plate manufacturers are increasingly incorporating aluminum and composite materials into their designs. Aluminum clutch plates are significantly lighter than traditional steel plates, reducing the overall weight of the clutch assembly. Composite materials, such as carbon composites, offer both weight savings and improved durability. These materials contribute to the reduction of the rotating mass in the drivetrain, enhancing fuel efficiency and responsiveness. Reducing the inertia of clutch plates by using lightweight materials allows for quicker shifts and improved overall vehicle performance. This trend aligns with consumer demand for more responsive and efficient vehicles, especially in the passenger car segment.

Adoption of Dual-Clutch and Automated Manual Transmissions

The adoption of advanced transmission technologies, such as dual-clutch transmissions (DCTs) and automated manual transmissions (AMTs), is another significant trend impacting the Automotive Passenger Car Clutch Plate Market. These transmission systems offer a balance between the convenience of automatic transmissions and the efficiency of manual transmissions: DCTs have gained popularity due to their ability to provide fast and smooth gear changes without the need for a torque converter. They utilize two separate clutches-one for even-numbered gears and another for odd-numbered gears-enabling rapid and seamless shifting. Clutch plates in DCTs must meet stringent performance requirements to handle the increased demands of this technology. AMTs combine the manual transmission's mechanical simplicity with the convenience of automated shifting. These transmissions use a traditional clutch system but engage and disengage the clutch automatically, eliminating the need for a clutch pedal. Clutch plates in AMTs must be engineered to withstand the repeated clutch engagements and disengagements associated with this technology.

Growing Demand for Electric and Hybrid Vehicles

The rising demand for electric vehicles (EVs) and hybrid vehicles is reshaping the Automotive Passenger Car Clutch Plate Market. EVs eliminate the need for traditional clutch plates used in internal combustion engine (ICE) vehicles. This trend presents both challenges and opportunities for clutch plate manufacturers: EVs operate on electric powertrains, which do not use conventional clutches for gear shifting. This means a portion of the market that was traditionally reliant on clutch plates is shrinking as electric vehicles gain market share. Hybrid vehicles, which combine both electric and internal combustion powertrains, still incorporate clutch systems. Clutch plates in hybrid vehicles play a crucial role in managing the transition between electric and gasoline power sources, optimizing overall efficiency. To adapt to this trend, clutch plate manufacturers are diversifying their product portfolios to include components specific to electric and hybrid powertrains. This may involve producing other components for EVs or developing entirely new products, such as components for electric powertrains.

Advancements in Friction Materials

Advancements in friction materials are significantly impacting the Automotive Passenger Car Clutch Plate Market. Friction materials are integral components of clutch plates, directly affecting their performance and longevity. Manufacturers are continually improving these materials to meet the demands of modern vehicles. Carbon composites have gained prominence as friction materials in clutch plates due to their exceptional properties. They offer high thermal resistance, excellent friction characteristics, and reduced wear rates. These materials contribute to enhanced clutch plate performance, durability, and overall longevity. Sintered friction materials, which are manufactured by compacting and heating metal or ceramic powders, are also being explored for clutch plate applications. Sintered materials offer excellent heat dissipation properties, making them suitable for high-performance vehicles and heavy-duty applications. Advancements in friction materials also allow for better control of the friction coefficient. Clutch plates with variable friction coefficients can provide a smoother engagement and disengagement process, reducing wear and tear while improving driver comfort.

Increased Focus on Sustainability and Recycling

The Automotive Passenger Car Clutch Plate Market is increasingly focused on sustainability and recycling initiatives. This trend aligns with broader global efforts to reduce waste and promote environmentally responsible manufacturing processes, Manufacturers are exploring the use of recycled materials in clutch plate production. Recycling old clutch plates and other components can reduce the environmental impact of manufacturing and lower raw material costs. Some clutch plate manufacturers are obtaining environmental certifications to demonstrate their commitment to sustainable practices. These certifications may include compliance with international standards for environmental management systems. Reducing waste in clutch plate manufacturing processes is a priority. Lean manufacturing principles and waste reduction strategies are being implemented to minimize material and energy waste.

Segmental Insights

Type Analysis

The Clutch Plate Market is strategically divided into four segments based on clutch plate size, namely: below 9 inches, between 9.1 and 10 inches, between 10.1 and 11 inches, and above 11 inches. Notably, the segment covering clutch disc sizes between 10 and 11 inches is expected to dominate during the forecast or projection period. This heightened growth can be attributed to the surging demand for electric vehicles (EVs) in the automotive industry. As the market witnesses a notable shift towards cleaner and more sustainable transportation solutions, there is a growing need for efficient and reliable clutch components within the 10 to 11-inch size range. This increasing interest in EVs is significantly driving the growth prospects of the Clutch Plate market.

Demand Category Analysis

The automotive clutch plate market is segmented into two primary sales channels: original equipment manufacturer (OEM) and aftermarket. OEM sales account for clutch plates supplied directly to automobile manufacturers for installation in new vehicles during the production process. OEMs often require customized clutch plates tailored to their specific vehicle models, making this segment highly competitive.

The aftermarket segment includes clutch plates sold to repair and maintenance service providers as replacement parts for existing vehicles. These clutch plates need to meet the performance standards of the original equipment to ensure safe and efficient operation. The aftermarket segment benefits from the continuous need for clutch plate replacements as vehicles age and undergo wear and tear.

Regional Insights

In comparison to all other regions, Asia-Pacific has the greatest market share, which can be due to the rising demand for vehicles in developing nations like China and India. Additionally, one of the factors influencing the market's growth is the presence of a sizable number of manual transmission vehicles in south-east Asia. The market's second-largest region, Europe, is expected to continue to expand gradually over the course of the projection period.The market is anticipated to expand as a result of factors including rising premium automobile demand, the adoption of practical powertrain systems in the vehicles, and investments made by significant market players.

During the projected period, North America is anticipated to grow quickly and hold a significant market share. The market is expected to grow as a result of factors including the rise in demand and quick adoption of electric vehicles in nations like the USA and Canada with an established automotive infrastructure in the region.

Key Market Players

• ZF Friedrichshafen AG

• BorgWarner Inc

• Valeo S.A

• Eaton Corporation Plc

• FCC Co. Ltd

• Clutch Auto Ltd.

• Schaeffler AG

• EXEDY Corporation

• NSK Ltd

• Aisin Seiki Co. Ltd

Report Scope:

In this report, the Global Automotive Passenger Car Clutch Plate Market has been segmented into the following categories, in addition to the industry trends which have also been detailed below:

Automotive Passenger Car Clutch Plate Market, By Type:

• Less than 9 inches
• 9.1 to 10 inches
• 10.1 to 11 inches
• More than 11 inches

Automotive Passenger Car Clutch Plate Market, By Demand Category:

• OEM
• Aftermarket

Automotive Passenger Car Clutch Plate Market, By Region:

• North America
• United States
• Canada
• Mexico
• Europe & CIS
• France
• Russia
• United Kingdom
• Italy
• Germany
• Spain
• Belgium
• Asia-Pacific
• China
• India
• Japan
• Indonesia
• Thailand
• Australia
• South Korea
• South America
• Brazil
• Argentina
• Colombia
• Middle East & Africa
• South Africa
• Saudi Arabia
• UAE
• Turkey

Competitive Landscape

• Company Profiles: Detailed analysis of the major companies present in the Global Automotive Passenger Car Clutch Plate Market.

Available Customizations:

• Global Automotive Passenger Car Clutch Plate market report with the given market data, Tech Sci Research offers customizations according to a company's specific needs. The following customization options are available for the report:

Company Information

• Detailed analysis and profiling of additional market players (up to five).

Table of Contents

1. Introduction

• 1.1. Product Overview
• 1.2. Key Highlights of the Report
• 1.3. Market Coverage
• 1.4. Market Segments Covered
• 1.5. Research Tenure Considered

2. Research Methodology

• 2.1. Objective of the Study
• 2.2. Baseline Methodology
• 2.3. Key Industry Partners
• 2.4. Major Association and Secondary Sources
• 2.5. Forecasting Methodology
• 2.6. Data Triangulation & Validation
• 2.7. Assumptions and Limitations

3. Executive Summary

• 3.1. Market Overview
• 3.2. Market Forecast
• 3.3. Key Regions
• 3.4. Key Segments

4. Impact of COVID-19 on Global Automotive Passenger Car Clutch Plate Market

5. Global Automotive Passenger Car Clutch Plate Market Outlook

• 5.1. Market Size & Forecast
  • 5.1.1. By Value & Volume
• 5.2. Market Share & Forecast
  • 5.2.1. By Type Market Share Analysis (Less than 9 inches, 9.1 to 10 inches, 10.1 to 11 inches, more than 11 inches)
  • 5.2.2. By Demand Category Market Share Analysis (OEM, Aftermarket)
  • 5.2.3. By Regional Market Share Analysis
    • 5.2.3.1. Asia-Pacific Market Share Analysis
    • 5.2.3.2. Europe & CIS Market Share Analysis
    • 5.2.3.3. North America Market Share Analysis
    • 5.2.3.4. South America Market Share Analysis
    • 5.2.3.5. Middle East & Africa Market Share Analysis
  • 5.2.4. By Company Market Share Analysis (Top 5 Companies, Others - By Value & Volume, 2022)
• 5.3. Global Automotive Passenger Car Clutch Plate Market Mapping & Opportunity Assessment
  • 5.3.1. By Type Market Mapping & Opportunity Assessment
  • 5.3.2. By Demand Category Market Mapping & Opportunity Assessment
  • 5.3.3. By Regional Market Mapping & Opportunity Assessment

6. Asia-Pacific Automotive Passenger Car Clutch Plate Market Outlook

• 6.1. Market Size & Forecast
  • 6.1.1. By Value & Volume
• 6.2. Market Share & Forecast
  • 6.2.1. By Type Market Share Analysis
  • 6.2.2. By Demand Category Market Share Analysis
  • 6.2.3. By Country Market Share Analysis
    • 6.2.3.1. China Market Share Analysis
    • 6.2.3.2. India Market Share Analysis
    • 6.2.3.3. Japan Market Share Analysis
    • 6.2.3.4. Indonesia Market Share Analysis
    • 6.2.3.5. Thailand Market Share Analysis
    • 6.2.3.6. South Korea Market Share Analysis
    • 6.2.3.7. Australia Market Share Analysis
    • 6.2.3.8. Rest of Asia-Pacific Market Share Analysis
• 6.3. Asia-Pacific: Country Analysis
  • 6.3.1. China Automotive Passenger Car Clutch Plate Market Outlook
    • 6.3.1.1. Market Size & Forecast
      • 6.3.1.1.1. By Value & Volume
    • 6.3.1.2. Market Share & Forecast
      • 6.3.1.2.1. By Type Market Share Analysis
      • 6.3.1.2.2. By Demand Category Market Share Analysis
  • 6.3.2. India Automotive Passenger Car Clutch Plate Market Outlook
    • 6.3.2.1. Market Size & Forecast
      • 6.3.2.1.1. By Value & Volume
    • 6.3.2.2. Market Share & Forecast
      • 6.3.2.2.1. By Type Market Share Analysis
      • 6.3.2.2.2. By Demand Category Market Share Analysis
  • 6.3.3. Japan Automotive Passenger Car Clutch Plate Market Outlook
    • 6.3.3.1. Market Size & Forecast
      • 6.3.3.1.1. By Value & Volume
    • 6.3.3.2. Market Share & Forecast
      • 6.3.3.2.1. By Type Market Share Analysis
      • 6.3.3.2.2. By Demand Category Market Share Analysis
  • 6.3.4. Indonesia Automotive Passenger Car Clutch Plate Market Outlook
    • 6.3.4.1. Market Size & Forecast
      • 6.3.4.1.1. By Value & Volume
    • 6.3.4.2. Market Share & Forecast
      • 6.3.4.2.1. By Type Market Share Analysis
      • 6.3.4.2.2. By Demand Category Market Share Analysis
  • 6.3.5. Thailand Automotive Passenger Car Clutch Plate Market Outlook
    • 6.3.5.1. Market Size & Forecast
      • 6.3.5.1.1. By Value & Volume
    • 6.3.5.2. Market Share & Forecast
      • 6.3.5.2.1. By Type Market Share Analysis
      • 6.3.5.2.2. By Demand Category Market Share Analysis
  • 6.3.6. South Korea Automotive Passenger Car Clutch Plate Market Outlook
    • 6.3.6.1. Market Size & Forecast
      • 6.3.6.1.1. By Value & Volume
    • 6.3.6.2. Market Share & Forecast
      • 6.3.6.2.1. By Type Market Share Analysis
      • 6.3.6.2.2. By Demand Category Market Share Analysis
  • 6.3.7. Australia Automotive Passenger Car Clutch Plate Market Outlook
    • 6.3.7.1. Market Size & Forecast
      • 6.3.7.1.1. By Value & Volume
    • 6.3.7.2. Market Share & Forecast
      • 6.3.7.2.1. By Type Market Share Analysis
      • 6.3.7.2.2. By Demand Category Market Share Analysis

7. Europe & CIS Automotive Passenger Car Clutch Plate Market Outlook

• 7.1. Market Size & Forecast
  • 7.1.1. By Value & Volume
• 7.2. Market Share & Forecast
  • 7.2.1. By Type Market Share Analysis
  • 7.2.2. By Demand Category Market Share Analysis
  • 7.2.3. By Country Market Share Analysis
    • 7.2.3.1. Germany Market Share Analysis
    • 7.2.3.2. Spain Market Share Analysis
    • 7.2.3.3. France Market Share Analysis
    • 7.2.3.4. Russia Market Share Analysis
    • 7.2.3.5. Italy Market Share Analysis
    • 7.2.3.6. United Kingdom Market Share Analysis
    • 7.2.3.7. Belgium Market Share Analysis
    • 7.2.3.8. Rest of Europe & CIS Market Share Analysis
• 7.3. Europe & CIS: Country Analysis
  • 7.3.1. Germany Automotive Passenger Car Clutch Plate Market Outlook
    • 7.3.1.1. Market Size & Forecast
      • 7.3.1.1.1. By Value & Volume
    • 7.3.1.2. Market Share & Forecast
      • 7.3.1.2.1. By Type Market Share Analysis
      • 7.3.1.2.2. By Demand Category Market Share Analysis
  • 7.3.2. Spain Automotive Passenger Car Clutch Plate Market Outlook
    • 7.3.2.1. Market Size & Forecast
      • 7.3.2.1.1. By Value & Volume
    • 7.3.2.2. Market Share & Forecast
      • 7.3.2.2.1. By Type Market Share Analysis
      • 7.3.2.2.2. By Demand Category Market Share Analysis
  • 7.3.3. France Automotive Passenger Car Clutch Plate Market Outlook
    • 7.3.3.1. Market Size & Forecast
      • 7.3.3.1.1. By Value & Volume
    • 7.3.3.2. Market Share & Forecast
      • 7.3.3.2.1. By Type Market Share Analysis
      • 7.3.3.2.2. By Demand Category Market Share Analysis
  • 7.3.4. Russia Automotive Passenger Car Clutch Plate Market Outlook
    • 7.3.4.1. Market Size & Forecast
      • 7.3.4.1.1. By Value & Volume
    • 7.3.4.2. Market Share & Forecast
      • 7.3.4.2.1. By Type Market Share Analysis
      • 7.3.4.2.2. By Demand Category Market Share Analysis
  • 7.3.5. Italy Automotive Passenger Car Clutch Plate Market Outlook
    • 7.3.5.1. Market Size & Forecast
      • 7.3.5.1.1. By Value & Volume
    • 7.3.5.2. Market Share & Forecast
      • 7.3.5.2.1. By Type Market Share Analysis
      • 7.3.5.2.2. By Demand Category Market Share Analysis
  • 7.3.6. United Kingdom Automotive Passenger Car Clutch Plate Market Outlook
    • 7.3.6.1. Market Size & Forecast
      • 7.3.6.1.1. By Value & Volume
    • 7.3.6.2. Market Share & Forecast
      • 7.3.6.2.1. By Type Market Share Analysis
      • 7.3.6.2.2. By Demand Category Market Share Analysis
  • 7.3.7. Belgium Automotive Passenger Car Clutch Plate Market Outlook
    • 7.3.7.1. Market Size & Forecast
      • 7.3.7.1.1. By Value & Volume
    • 7.3.7.2. Market Share & Forecast
      • 7.3.7.2.1. By Type Market Share Analysis
      • 7.3.7.2.2. By Demand Category Market Share Analysis

8. North America Automotive Passenger Car Clutch Plate Market Outlook

• 8.1. Market Size & Forecast
  • 8.1.1. By Value & Volume
• 8.2. Market Share & Forecast
  • 8.2.1. By Type Market Share Analysis
  • 8.2.2. By Demand Category Market Share Analysis
  • 8.2.3. By Country Market Share Analysis
    • 8.2.3.1. United States Market Share Analysis
    • 8.2.3.2. Mexico Market Share Analysis
    • 8.2.3.3. Canada Market Share Analysis
• 8.3. North America: Country Analysis
  • 8.3.1. United States Automotive Passenger Car Clutch Plate Market Outlook
    • 8.3.1.1. Market Size & Forecast
      • 8.3.1.1.1. By Value & Volume
    • 8.3.1.2. Market Share & Forecast
      • 8.3.1.2.1. By Type Market Share Analysis
      • 8.3.1.2.2. By Demand Category Market Share Analysis
  • 8.3.2. Mexico Automotive Passenger Car Clutch Plate Market Outlook
    • 8.3.2.1. Market Size & Forecast
      • 8.3.2.1.1. By Value & Volume
    • 8.3.2.2. Market Share & Forecast
      • 8.3.2.2.1. By Type Market Share Analysis
      • 8.3.2.2.2. By Demand Category Market Share Analysis
  • 8.3.3. Canada Automotive Passenger Car Clutch Plate Market Outlook
    • 8.3.3.1. Market Size & Forecast
      • 8.3.3.1.1. By Value & Volume
    • 8.3.3.2. Market Share & Forecast
      • 8.3.3.2.1. By Type Market Share Analysis
      • 8.3.3.2.2. By Demand Category Market Share Analysis

9. South America Automotive Passenger Car Clutch Plate Market Outlook

• 9.1. Market Size & Forecast
  • 9.1.1. By Value & Volume
• 9.2. Market Share & Forecast
  • 9.2.1. By Type Market Share Analysis
  • 9.2.2. By Demand Category Market Share Analysis
  • 9.2.3. By Country Market Share Analysis
    • 9.2.3.1. Brazil Market Share Analysis
    • 9.2.3.2. Argentina Market Share Analysis
    • 9.2.3.3. Colombia Market Share Analysis
    • 9.2.3.4. Rest of South America Market Share Analysis
• 9.3. South America: Country Analysis
  • 9.3.1. Brazil Automotive Passenger Car Clutch Plate Market Outlook
    • 9.3.1.1. Market Size & Forecast
      • 9.3.1.1.1. By Value & Volume
    • 9.3.1.2. Market Share & Forecast
      • 9.3.1.2.1. By Type Market Share Analysis
      • 9.3.1.2.2. By Demand Category Market Share Analysis
  • 9.3.2. Colombia Automotive Passenger Car Clutch Plate Market Outlook
    • 9.3.2.1. Market Size & Forecast
      • 9.3.2.1.1. By Value & Volume
    • 9.3.2.2. Market Share & Forecast
      • 9.3.2.2.1. By Type Market Share Analysis
      • 9.3.2.2.2. By Demand Category Market Share Analysis
  • 9.3.3. Argentina Automotive Passenger Car Clutch Plate Market Outlook
    • 9.3.3.1. Market Size & Forecast
      • 9.3.3.1.1. By Value & Volume
    • 9.3.3.2. Market Share & Forecast
      • 9.3.3.2.1. By Type Market Share Analysis
      • 9.3.3.2.2. By Demand Category Market Share Analysis

10. Middle East & Africa Automotive Passenger Car Clutch Plate Market Outlook

• 10.1. Market Size & Forecast
  • 10.1.1. By Value & Volume
• 10.2. Market Share & Forecast
  • 10.2.1. By Type Market Share Analysis
  • 10.2.2. By Demand Category Market Share Analysis
  • 10.2.3. By Country Market Share Analysis
    • 10.2.3.1. South Africa Market Share Analysis
    • 10.2.3.2. Turkey Market Share Analysis
    • 10.2.3.3. Saudi Arabia Market Share Analysis
    • 10.2.3.4. UAE Market Share Analysis
    • 10.2.3.5. Rest of Middle East & Africa Market Share Africa
• 10.3. Middle East & Africa: Country Analysis
  • 10.3.1. South Africa Automotive Passenger Car Clutch Plate Market Outlook
    • 10.3.1.1. Market Size & Forecast
      • 10.3.1.1.1. By Value & Volume
    • 10.3.1.2. Market Share & Forecast
      • 10.3.1.2.1. By Type Market Share Analysis
      • 10.3.1.2.2. By Demand Category Market Share Analysis
  • 10.3.2. Turkey Automotive Passenger Car Clutch Plate Market Outlook
    • 10.3.2.1. Market Size & Forecast
      • 10.3.2.1.1. By Value & Volume
    • 10.3.2.2. Market Share & Forecast
      • 10.3.2.2.1. By Type Market Share Analysis
      • 10.3.2.2.2. By Demand Category Market Share Analysis
  • 10.3.3. Saudi Arabia Automotive Passenger Car Clutch Plate Market Outlook
    • 10.3.3.1. Market Size & Forecast
      • 10.3.3.1.1. By Value & Volume
    • 10.3.3.2. Market Share & Forecast
      • 10.3.3.2.1. By Type Market Share Analysis
      • 10.3.3.2.2. By Demand Category Market Share Analysis
  • 10.3.4. UAE Automotive Passenger Car Clutch Plate Market Outlook
    • 10.3.4.1. Market Size & Forecast
      • 10.3.4.1.1. By Value & Volume
    • 10.3.4.2. Market Share & Forecast
      • 10.3.4.2.1. By Type Market Share Analysis
      • 10.3.4.2.2. By Demand Category Market Share Analysis

11. SWOT Analysis

• 11.1. Strength
• 11.2. Weakness
• 11.3. Opportunities
• 11.4. Threats

12. Market Dynamics

• 12.1. Market Drivers
• 12.2. Market Challenges

13. Market Trends and Developments

14. Competitive Landscape

• 14.1. Company Profiles (Up to 10 Major Companies)
  • 14.1.1. ZF Friedrichshafen AG
    • 14.1.1.1. Company Details
    • 14.1.1.2. Key Product Offered
    • 14.1.1.3. Financials (As Per Availability)
    • 14.1.1.4. Recent Developments
    • 14.1.1.5. Key Management Personnel
  • 14.1.2. BorgWarner Inc
    • 14.1.2.1. Company Details
    • 14.1.2.2. Key Product Offered
    • 14.1.2.3. Financials (As Per Availability)
    • 14.1.2.4. Recent Developments
    • 14.1.2.5. Key Management Personnel
  • 14.1.3. Valeo S.A
    • 14.1.3.1. Company Details
    • 14.1.3.2. Key Product Offered
    • 14.1.3.3. Financials (As Per Availability)
    • 14.1.3.4. Recent Developments
    • 14.1.3.5. Key Management Personnel
  • 14.1.4. Eaton Corporation Plc
    • 14.1.4.1. Company Details
    • 14.1.4.2. Key Product Offered
    • 14.1.4.3. Financials (As Per Availability)
    • 14.1.4.4. Recent Developments
    • 14.1.4.5. Key Management Personnel
  • 14.1.5. FCC Co. Ltd
    • 14.1.5.1. Company Details
    • 14.1.5.2. Key Product Offered
    • 14.1.5.3. Financials (As Per Availability)
    • 14.1.5.4. Recent Developments
    • 14.1.5.5. Key Management Personnel
  • 14.1.6. Aisin Seiki Co. Ltd
    • 14.1.6.1. Company Details
    • 14.1.6.2. Key Product Offered
    • 14.1.6.3. Financials (As Per Availability)
    • 14.1.6.4. Recent Developments
    • 14.1.6.5. Key Management Personnel
  • 14.1.7. Clutch Auto Ltd.
    • 14.1.7.1. Company Details
    • 14.1.7.2. Key Product Offered
    • 14.1.7.3. Financials (As Per Availability)
    • 14.1.7.4. Recent Developments
    • 14.1.7.5. Key Management Personnel
  • 14.1.8. Schaeffler AG
    • 14.1.8.1. Company Details
    • 14.1.8.2. Key Product Offered
    • 14.1.8.3. Financials (As Per Availability)
    • 14.1.8.4. Recent Developments
    • 14.1.8.5. Key Management Personnel
  • 14.1.9. EXEDY Corporation
    • 14.1.9.1. Company Details
    • 14.1.9.2. Key Product Offered
    • 14.1.9.3. Financials (As Per Availability)
    • 14.1.9.4. Recent Developments
    • 14.1.9.5. Key Management Personnel
  • 14.1.10. NSK Ltd.
    • 14.1.10.1. Company Details
    • 14.1.10.2. Key Product Offered
    • 14.1.10.3. Financials (As Per Availability)
    • 14.1.10.4. Recent Developments
    • 14.1.10.5. Key Management Personnel

15. Strategic Recommendations

• 15.1. Key Focus Areas
  • 15.1.1. Target Regions
  • 15.1.2. Target Type
  • 15.1.3. Target Demand Category

16. About Us & Disclaimer