![]() |
시장보고서
상품코드
1637188
전기자동차 열관리 시스템 시장 - 세계 산업 규모, 점유율, 동향, 기회, 예측 : 추진 유형별, 용도별, 기술별, 지역별, 경쟁별(2020-2030년)Electric Vehicle Thermal Management System Market - Global Industry Size, Share, Trends, Opportunity, and Forecast, Segmented By Propulsion Type, By Application, By Technology, By Region & Competition, 2020-2030F |
전기자동차 열관리 시스템 세계 시장 규모는 2024년 224억 3,000만 달러로 예측 기간 동안 CAGR 7.86%로 2030년에는 353억 3,000만 달러에 달할 것으로 예상됩니다.
세계 전기자동차 열관리 시스템(EV TMS) 시장은 전기자동차(EV)의 최적의 성능, 효율성 및 수명을 보장하는 데 있어 매우 중요하며, EV는 기존의 엔진 냉각 시스템이 없고 배터리와 전기 모터에 의존하여 주행 중 상당한 열을 발생시키기 때문에 열 관리 요구사항이 기존 내연기관 차량과 크게 다릅니다. EV용 TMS의 주요 기능은 배터리, 전기 모터, 파워 일렉트로닉스, 차량용 충전기 등 주요 부품의 온도를 최적의 작동 범위 내에서 조정 및 유지하는 것입니다.
시장 개요 | |
---|---|
예측 기간 | 2026-2030년 |
시장 규모 : 2024년 | 224억 3,000만 달러 |
시장 규모 : 2030년 | 353억 3,000만 달러 |
CAGR : 2025-2030년 | 7.86% |
급성장 부문 | BEV |
최대 시장 | 아시아태평양 |
EV TMS는 일반적으로 패시브 냉각과 액티브 냉각을 결합하여 고출력 부품에서 발생하는 열을 관리합니다. 패시브 냉각 방식에는 외부로부터의 에너지 입력 없이 열을 흡수 및 방출하는 방열판, 단열재, 상변화 재료 등이 있습니다. 능동형 냉각 시스템은 센서나 액추에이터에 의해 제어되는 액체 또는 공기 기반 냉각 메커니즘을 이용하여 온도를 효율적으로 조절하고 배터리 성능 및 안전에 영향을 미칠 수 있는 열 폭주를 방지합니다.
첨단 EV TMS 기술 채택을 촉진하는 주요 고려사항으로는 차량 주행거리 향상, 배터리 수명 연장, 다양한 환경 조건에서 안정적인 성능 확보 등이 있습니다. 효율적인 열 관리 시스템은 배터리 효율을 유지하고 냉각 및 난방 기능과 관련된 에너지 소비를 줄임으로써 EV의 주행거리 연장에 크게 기여합니다. 또한, 효과적인 열 관리는 과열 및 열 열화 위험을 줄여 EV의 안전성과 신뢰성을 높여 소비자의 신뢰를 높이고, 안전 표준을 준수할 수 있도록 지원합니다.
향후 EV TMS의 진화는 배터리 기술의 발전, 자동차의 전동화 추세, 지속가능한 운송 솔루션을 촉진하는 규제 발전과 밀접하게 연계될 것으로 예상됩니다. 재료 과학, 제어 알고리즘, 차량 텔레매틱스 시스템과의 통합에 대한 혁신은 열 관리 효율과 성능을 더욱 향상시킬 것으로 예상됩니다. 전 세계 자동차 산업이 전동화로의 전환을 지속하고 있는 가운데, 전기자동차의 성장과 보급을 지원하는 EV TMS의 역할은 장기적인 지속가능성 목표를 달성하는 데 있어 중요한 역할을 할 것으로 보입니다.
전기자동차의 급속한 보급
배터리 성능 및 수명 향상
기술 발전과 혁신
배터리 팩의 크기와 무게의 제약
비용 압박과 경제성에 대한 우려
다양한 환경과 주행 조건
냉각 기술의 발전
AI와 머신러닝의 통합
지속가능한 열 솔루션에 집중
The Global Electric Vehicle Thermal Management System Market was valued at USD 22.43 Billion in 2024 and is expected to reach USD 35.33 Billion by 2030 with a CAGR of 7.86% during the forecast period. The global electric vehicle thermal management system (EV TMS) market is pivotal in ensuring optimal performance, efficiency, and longevity of electric vehicles (EVs). EVs differ significantly from traditional internal combustion engine vehicles in their thermal management requirements, primarily due to the absence of a conventional engine cooling system and the reliance on batteries and electric motors that generate substantial heat during operation. The primary function of EV TMS is to regulate and maintain the temperature of critical components such as batteries, electric motors, power electronics, and onboard chargers within optimal operating ranges.
Market Overview | |
---|---|
Forecast Period | 2026-2030 |
Market Size 2024 | USD 22.43 Billion |
Market Size 2030 | USD 35.33 Billion |
CAGR 2025-2030 | 7.86% |
Fastest Growing Segment | BEV |
Largest Market | Asia-Pacific |
EV TMS typically employs a combination of passive and active cooling techniques to manage heat generated by high-power components. Passive cooling methods include heat sinks, thermal insulation, and phase-change materials that absorb and dissipate heat without requiring external energy input. Active cooling systems utilize liquid or air-based cooling mechanisms controlled by sensors and actuators to efficiently regulate temperatures and prevent thermal runaway, which can affect battery performance and safety.
Key considerations driving the adoption of advanced EV TMS technologies include improving vehicle range, enhancing battery life, and ensuring consistent performance in diverse environmental conditions. Efficient thermal management systems contribute significantly to extending the driving range of EVs by maintaining battery efficiency and reducing energy consumption associated with cooling and heating functions. Moreover, effective thermal management enhances the safety and reliability of EVs by mitigating risks of overheating and thermal degradation, thereby fostering consumer confidence and supporting regulatory compliance with safety standards.
Looking forward, the evolution of EV TMS is expected to align closely with advancements in battery technology, vehicle electrification trends, and regulatory developments promoting sustainable transportation solutions. Innovations in materials science, control algorithms, and integration with vehicle telematics systems are anticipated to drive further improvements in thermal management efficiency and performance. As the global automotive industry continues its transition towards electrification, the role of EV TMS in supporting the growth and adoption of electric vehicles as viable alternatives to conventional vehicles remains critical for achieving long-term sustainability goals.
Key Market Drivers
Rapid Growth of Electric Vehicle Adoption
The surge in electric vehicle adoption represents a primary driver for the Global Electric Vehicle Thermal Management System Market. As the automotive industry undergoes a profound shift toward electrification, the demand for efficient thermal management systems intensifies. These systems play a pivotal role in maintaining optimal operating temperatures for electric drivetrains and battery packs, ensuring the reliable and efficient performance of electric vehicles. The escalating adoption of electric vehicles globally, driven by environmental consciousness and regulatory support, significantly contributes to the expansion of the thermal management system market. For instance, global electric vehicle (EV) sales surged by 49% in the first half of 2023, reaching 6.2 million units. EVs now account for 16% of global light vehicle sales, with China leading at 55% of the market share. Europe and the U.S. followed, showing strong growth, especially in the latter's 97% year-on-year increase. Tesla and BYD dominate global sales, with Tesla's Model Y leading, and BYD witnessing impressive sales growth. The overall market has grown by almost 39% in 2023, reinforcing the EV sector's transformative momentum.
Enhanced Battery Performance and Longevity
The focus on improving battery performance and longevity is a key driver propelling the electric vehicle thermal management system market. Thermal management solutions are crucial in regulating the temperature of lithium-ion batteries, which are sensitive to temperature variations. By maintaining the optimal temperature range, these systems enhance battery efficiency, reduce degradation, and extend the overall lifespan of the battery pack. Manufacturers and consumers alike recognize the importance of robust thermal management in mitigating battery-related challenges and maximizing the value and longevity of electric vehicles.
Technological Advancements and Innovation
Continuous technological advancements and innovation within the electric vehicle thermal management sector contribute significantly to market growth. Manufacturers are investing in research and development to introduce advanced cooling and heating techniques, novel materials, and sophisticated control algorithms. These innovations aim to address thermal challenges associated with fast-charging, extreme weather conditions, and varying driving scenarios. The pursuit of cutting-edge solutions fosters a competitive landscape, driving the evolution of thermal management systems to meet the evolving needs of electric vehicle technologies.
Key Market Challenges
Battery Pack Size and Weight Constraints
One of the key challenges facing the Global Electric Vehicle Thermal Management System Market is the constraint imposed by the size and weight of battery packs. As automakers strive to increase the driving range of electric vehicles, there is a tendency to design larger battery packs, resulting in challenges related to effective thermal management. Balancing the need for extended range with the impact on the weight and space available for thermal management components poses a significant engineering challenge for manufacturers.
Cost Pressures and Affordability Concerns
Affordability remains a critical factor in the widespread adoption of electric vehicles, and the cost associated with implementing advanced thermal management systems is a notable challenge. Electric vehicles are already subject to higher production costs, primarily due to expensive battery technologies. Integrating sophisticated thermal control mechanisms further increases manufacturing expenses. Striking a balance between incorporating effective thermal management solutions and maintaining cost competitiveness poses a challenge for manufacturers seeking to make electric vehicles accessible to a broader consumer base.
Diverse Environmental and Driving Conditions
The diversity of global environmental and driving conditions presents a significant challenge for electric vehicle thermal management. Electric vehicles operate in a wide range of climates, from extreme cold to intense heat, impacting the efficiency of thermal control systems. Managing temperature variations becomes crucial for battery health and overall vehicle performance. Developing thermal management systems that can effectively adapt to diverse conditions while maintaining consistent performance remains a complex engineering challenge for the industry.
Key Market Trends
Advancements in Cooling Technologies
A prominent trend in the Global Electric Vehicle Thermal Management System Market is the continuous advancements in cooling technologies. Manufacturers are exploring and implementing innovative cooling solutions, such as liquid cooling systems and advanced heat exchangers. These technologies aim to enhance the efficiency of thermal management, particularly in high-performance electric vehicles and those subjected to demanding conditions. The evolution of cooling methods contributes to maintaining optimal temperature levels, ensuring prolonged battery life, and sustaining overall vehicle performance.
Integration of AI and Machine Learning
The integration of artificial intelligence (AI) and machine learning is reshaping the landscape of electric vehicle thermal management. These technologies enable dynamic and predictive control of thermal systems, adapting to real-time driving conditions and user behavior. AI algorithms analyze data from various sensors to optimize temperature control, predict cooling or heating requirements, and enhance energy efficiency. This trend aligns with the broader industry shift toward smart and connected electric vehicles, ensuring more responsive and adaptive thermal management systems.
Focus on Sustainable Thermal Solutions
Sustainability is a prevailing trend in the electric vehicle thermal management sector. Manufacturers are increasingly emphasizing the use of eco-friendly and sustainable materials in the construction of thermal components. Additionally, the development of thermal solutions that minimize energy consumption contributes to the overall environmental sustainability of electric vehicles. As the industry places a greater emphasis on reducing the ecological footprint, sustainable thermal management practices emerge as a key trend in line with broader environmental goals.
Segmental Insights
Technology Insights
In 2024, the dominating technology in the global electric vehicle (EV) thermal management system market is the active thermal management system. This technology plays a pivotal role in regulating the temperature of battery packs and other key components, ensuring optimal performance, safety, and longevity. Active thermal management involves using mechanisms such as pumps, fans, heat exchangers, and electric heaters to control the temperature of the vehicle's various systems. This approach allows for more precise control of temperature fluctuations, helping to prevent overheating and undercooling, which can affect battery efficiency and lifespan. Active systems also enhance the performance of powertrains and extend the driving range by keeping systems within the ideal operating temperature range. Due to their efficiency in managing heat in high-performance EVs, active systems are increasingly being adopted in both consumer and commercial vehicles.
The demand for active thermal management is particularly pronounced in regions with extreme climates, where temperature extremes can severely impact EV performance. These systems are increasingly favored for their ability to maintain stable thermal conditions in both high and low temperatures. They are especially critical as automakers continue to focus on improving battery technology and energy efficiency in response to regulatory pressures and consumer expectations.
While passive and hybrid systems, which combine elements of both active and passive approaches, continue to find their place in specific applications, active systems lead the market due to their superior capability in ensuring optimal vehicle operation under varied conditions. As technology advances, it is expected that the adoption of active thermal management solutions will expand, with more innovations aimed at reducing energy consumption and improving sustainability in the automotive industry.
Regional Insights
In 2024, Asia-Pacific hold the dominant position in the global electric vehicle (EV) thermal management system market. The region's strong growth in electric vehicle adoption, driven by countries like China, Japan, and South Korea, is a major factor behind this dominance. Asia-Pacific has become a hub for EV production and innovation, with significant investments in infrastructure, government incentives, and a rapidly expanding consumer base. As EV sales continue to rise in these countries, the demand for advanced thermal management systems has surged to ensure the efficiency and longevity of the vehicle batteries and other critical components.
China, as the largest EV market in the world, leads the charge in integrating thermal management solutions into electric vehicles. The country's aggressive push towards green energy policies, including subsidies and infrastructure development, has accelerated EV adoption. With a focus on both domestic and international markets, Chinese manufacturers are continuously enhancing thermal management technology to meet the evolving demands of electric vehicles. For instance, In 2023, China dominated the global electric vehicle market, responsible for 58% of the 13.7 million BEVs and PHEVs sold globally. With EV penetration rates at 22%, China led in both BEV and PHEV sales, surpassing the US and Germany. China's influence extends to battery production, where it accounted for 53% of global battery capacity deployed, producing 59% of the total power-hours for EVs. Moreover, China exported 49.5 GWh of battery power, further solidifying its position as the largest EV exporter worldwide. With aggressive incentives and innovations, China continues to lead global EV growth.
Japan and South Korea also contribute significantly to the region's market share. Both countries are known for their automotive industries and have made substantial advancements in battery and thermal management technology. These nations have embraced the transition to electric mobility, and their technological expertise plays a crucial role in the widespread adoption of thermal management systems in the region.
In Asia-Pacific, the need for effective thermal management solutions is particularly high due to the diverse climates across the region, from hot summers to cold winters. This variation requires systems capable of maintaining stable temperatures in various conditions to optimize battery life, powertrain performance, and vehicle range. Manufacturers in the region are focusing on improving active thermal management systems, as they offer precise temperature regulation and enhanced performance compared to passive and hybrid systems.
In this report, the Global Automotive Coolant market has been segmented into the following categories, in addition to the industry trends which have also been detailed below:
Company Profiles: Detailed analysis of the major companies present in the Global Electric Vehicle Thermal Management System Market.
Global Electric Vehicle Thermal Management System Market report with the given market data, TechSci Research offers customizations according to a company's specific needs. The following customization options are available for the report: