세계의 핫 러너 시장 규모 : 유형별, 용도별, 지역별, 범위 및 예측

Hot Runner Market Size and Forecast

Hot Runner Market size was valued at USD 3783.04 Million in 2024 and is projected to reach USD 6368.17 Million by 2031, growing at a CAGR of 7.42% from 2024 to 2031. The expansion of the plastic and polymer composite industries is what is fueling the growth of the Hot Runner Market. Hot runner is developing and attracting a new clientele as a result of the increase in the production of plastics using the injection molding method. The Global Hot Runner Market report provides a holistic evaluation of the market. The report offers a comprehensive analysis of key segments, trends, drivers, restraints, competitive landscape, and factors that are playing a substantial role in the market.

Global Hot Runner Market Definition

Injection molding processing capabilities were revolutionized by hot runner technology, which was introduced to the plastics industry more than 50 years ago. This technology-enhanced operational efficiencies decreased scrap and improved molded part quality. A molten plastic transporting system used within an injection mold is called a hot runner system. In other terms, an injection molding machine's hot runner system is made up of heated parts that are typically powered by electricity and employed inside plastic injection molds to transfer molten plastic into the cavities of the mold.

The type of resin, injection speed, fill rate, and the molded item is just a few of the variables that affect how big hot runner melt channels should be. The hot runner system inside the injection mold and the resin inside the machine barrel is heated to processing temperature by a temperature controller (standalone controller or controls from the injection molding machine), which then injects the resin into the mold. The resin enters the intake, descends through the manifold, divides at the numerous nozzles, and finally passes through injection points (or gates) into the final mold cavity where the final item is created.

The number of nozzles in a modern mold can range from 1 to over 192, depending on the type of plastic parts being produced. However, the processing of a wider variety of resins for injection molders became more feasible and convenient with the development of hot runner technology with sophisticated thermal controls. The hot runner components are separately heated, as opposed to a cold runner mold, to ensure that the resin maintains the desired temperature throughout the mold. To ensure that the process is suited to each type of resin's requirements and delivers the finest possible part quality, the temperature of each hot runner heated component may also be accurately controlled. Hot runners can now produce incredibly intricate pieces.

What's inside a VMR industry report?

Our reports include actionable data and forward-looking analysis that help you craft pitches, create business plans, build presentations and write proposals.

Global Hot Runner Market Overview

Since plastics have so many advantages over other materials over a product's shelf life, they are increasingly being used in a wide range of industries, including construction, automotive, electronics, and medicine. In a wide range of product and packaging applications, the process and discrete industries are increasingly adopting molded plastic products. This increased demand has created a need for an improved manufacturing process and high-quality products, both of which may be accomplished by implementing automation in the production process. With the aid of real-time data about the entire process, decreasing errors, technological improvements, digitization of the process, and networked systems help to acquire high quality in less time.

The automation and plastic molding processes are greatly aided by Industry 4.0 and the Internet of Things, which is also helping the Hot Runner Market expand. The rapid increase in industrial investment and the strong demand for items made of injection-molded plastic in the automotive and healthcare sectors are driving expansion in the worldwide Hot Runner Market. Additionally, a growing trend toward automated plastic processing and packaging is expected to foster the expansion of the Hot Runner Market by boosting production and efficiency. In order to assure energy efficiency, leading manufacturers are also manufacturing electric valve gate hot runners, which is boosting the market's expansion.

Market Attractiveness

The image of market attractiveness provided would further help to get information about the region that is majorly leading in the global Hot Runner Market. We cover the major impacting factors that are responsible for driving the industry growth in the given region.

Porter's Five Forces

The image provided would further help to get information about Porter's five forces framework providing a blueprint for understanding the behavior of competitors and a player's strategic positioning in the respective industry. The porter's five forces model can be used to assess the competitive landscape in the global Hot Runner Market, gauge the attractiveness of a certain sector, and assess investment possibilities.

Global Hot Runner Market: Segmentation Analysis

The Global Hot Runner Market is segmented on the basis of Type, Application, and Geography.

Hot Runner Market, By Application

• Automotive Industry
• Packaging Industry
• Electronic Industry
• Medical Industry
• Others
• To Get Summarized Market Report By Application:-

Based on Application, the market is segmented into Automotive Industry, Packaging Industry, Electronic Industry, Medical Industry, and Others. The segment of the automotive industry, which held the biggest market share in 2018, is anticipated to expand at a CAGR of 8.44% over the course of the forecast year. The second-largest market in 2018 was the packaging industry category, and it is anticipated to develop at a CAGR of 7.84%.

Hot Runner Market, By Type

• Valve Gate Hot Runner
• Open Gate Hot Runner

Based on Type, the market is segmented into Valve Gate Hot Runner and Open Gate Hot Runner. The market share held by Valve Gate Hot Runner in 2018 was the largest, and over the forecast period, it is expected to expand at a CAGR of 8.33%. Valve gate hot runner systems use mechanical shut-off pins that enable the hot runner nozzle to open and close at the tip to regulate the flow of plastic into the mold cavity. Better plastic parts are produced and cycle durations are shorter because of the ability to precisely control the flow of material through the gates.

Hot Runner Market, By Geography

• North America
• Europe
• Asia Pacific
• Rest of the World
• To Get Summarized Market Report By Geography:-
• On the basis of Regional Analysis, The Global Hot Runner Market is classified into North America, Europe, Asia Pacific, and the Rest of the world. North America held the biggest market share, with Asia-Pacific coming in second. The hot runner technology has become more widely used in North America in sectors like packing and electronics. Hot runner technology has recently seen a number of advancements, including the creation of electric valve gate hot runners that guarantee effectiveness, responsiveness, and precision.

Key Players

• The "Global Hot Runner Market" study report will provide valuable insight with an emphasis on the global market including some of the major players such as
• GUNTHER Heisskanaltechnik GmbH, Barnes Group Inc., FISA Corporation Ltd., Fast Heat, Inc. Co., Ltd., EWIKON HeiBkanalsysteme GmbH, Milacron, Husky Injection Molding Systems Ltd., INCOE Corporation, Inglass S.p.A., and CACO PACIFIC Corporation.

Our market analysis also entails a section solely dedicated to such major players wherein our analysts provide an insight into the financial statements of all the major players, along with product benchmarking and SWOT analysis. The competitive landscape section also includes key development strategies, market share and market ranking analysis of the above-mentioned players.

• Ace Matrix Analysis
• The Ace Matrix provided in the report would help to understand how the major key players involved in this industry are performing as we provide a ranking for these companies based on various factors such as service features & innovations, scalability, innovation of services, industry coverage, industry reach, and growth roadmap. Based on these factors, we rank the companies into four categories as
• Active, Cutting Edge, Emerging, and Innovators.

TABLE OF CONTENTS

1 INTRODUCTION

• 1.1 MARKET DEFINITION
• 1.2 MARKET SEGMENTATION
• 1.3 RESEARCH TIMELINES
• 1.4 ASSUMPTIONS
• 1.5 LIMITATIONS

2 RESEARCH METHODOLOGY

• 2.1 DATA MINING
• 2.2 SECONDARY RESEARCH
• 2.3 PRIMARY RESEARCH
• 2.4 SUBJECT MATTER EXPERT ADVICE
• 2.5 QUALITY CHECK
• 2.6 FINAL REVIEW
• 2.7 DATA TRIANGULATION
• 2.8 BOTTOM-UP APPROACH
• 2.9 TOP DOWN APPROACH
• 2.10 RESEARCH FLOW
• 2.11 DATA SOURCES

3 EXECUTIVE SUMMARY

• 3.1 MARKET OVERVIEW
• 3.2 GLOBAL HOT RUNNER MARKET GEOGRAPHICAL ANALYSIS (CAGR %)
• 3.3 GLOBAL HOT RUNNER MARKET, BY TYPE (USD MILLION)
• 3.4 GLOBAL HOT RUNNER MARKET, BY APPLICATION (USD MILLION)
• 3.5 FUTURE MARKET OPPORTUNITIES
• 3.6 GLOBAL MARKET SPLIT

4 MARKET OUTLOOK

• 4.1 GLOBAL HOT RUNNER MARKET OUTLOOK
• 4.1 MARKET DRIVERS
  • 4.1.1 REDUCTION IN TIME, COST AND WASTAGE ALONG WITH HIGH QUALITY
  • 4.1.2 INCREASED AUTOMATION AND TECHNOLOGICAL ADVANCEMENT IN VARIOUS PROCESS AND DISCRETE INDUSTRIES FOR PLASTIC MOLDING
• 4.2 MARKET RESTRAINT
  • 4.2.1 HIGH TOOLING AND MAINTENANCE COSTS WITH COMPLEXITY IN DESIGN
• 4.3 MARKET OPPORTUNITIES
  • 4.3.1 LUCRATIVE GROWTH OPPORTUNITIES IN AUTOMOTIVE AND RAPID RISE IN INVESTMENT IN THE INDUSTRIAL SECTOR
• 4.4 PORTERS FIVE FORCE MODEL
• 4.5 VALUE CHAIN ANALYSIS
  • 4.5.1 RESEARCH AND PRODUCT DEVELOPMENT
  • 4.5.2 MANUFACTURING & ASSEMBLY
  • 4.5.3 DISTRIBUTION
  • 4.5.4 POST-SALE SERVICE

5 MARKET, BY TYPE

• 5.1 OVERVIEW
• 5.2 VALVE GATE HOT RUNNER
• 5.3 OPEN GATE HOT RUNNER

6 MARKET, BY APPLICATION

• 6.1 OVERVIEW
• 6.2 AUTOMOTIVE INDUSTRY
• 6.3 ELECTRONIC INDUSTRY
• 6.4 MEDICAL INDUSTRY
• 6.5 PACKAGING INDUSTRY
• 6.6 OTHERS

7 MARKET, BY GEOGRAPHY

• 7.1 OVERVIEW
• 7.2 NORTH AMERICA
  • 7.2.1 U.S
  • 7.2.2 CANADA
  • 7.2.3 MEXICO
• 7.3 EUROPE
  • 7.3.1 GERMANY
  • 7.3.2 UK
  • 7.3.3 FRANCE
  • 7.3.4 REST OF EUROPE
• 7.4 ASIA PACIFIC
  • 7.4.1 CHINA
  • 7.4.2 JAPAN
  • 7.4.3 INDIA
  • 7.4.4 REST OF ASIA-PACIFIC
• 7.5 REST OF THE WORLD
  • 7.5.1 MIDDLE EAST AND AFRICA
  • 7.5.2 LATIN AMERICA

8 COMPETITIVE LANDSCAPE

• 8.1 OVERVIEW
• 8.2 COMPETITIVE SCENARIO
• 8.3 COMPANY MARKET RANKING ANALYSIS

9 COMPANY PROFILES

• 9.1 BARNES GROUP INC.
  • 9.1.1 COMPANY OVERVIEW
  • 9.1.2 COMPANY INSIGHTS
  • 9.1.3 SEGMENT BREAKDOWN
  • 9.1.4 PRODUCT BENCHMARKING
  • 9.1.5 KEY DEVELOPMENTS
  • 9.1.6 SWOT ANALYSIS
• 9.2 MILACRON
  • 9.2.1 COMPANY OVERVIEW
  • 9.2.2 COMPANY INSIGHTS
  • 9.2.3 SEGMENT BREAKDOWN
  • 9.2.4 PRODUCT BENCHMARKING
  • 9.2.5 KEY DEVELOPMENT
  • 9.2.6 SWOT ANALYSIS
• 9.3 HUSKY INJECTION MOLDING SYSTEMS LTD.
  • 9.3.1 COMPANY OVERVIEW
  • 9.3.2 COMPANY INSIGHTS
  • 9.3.3 PRODUCT BENCHMARKING
  • 9.3.4 SWOT ANALYSIS
• 9.4 EWIKON HEIBKANALSYSTEME GMBH
  • 9.4.1 COMPANY OVERVIEW
  • 9.4.2 COMPANY INSIGHTS
  • 9.4.3 PRODUCT BENCHMARKING
• 9.5 FISA CORPORATION
  • 9.5.1 COMPANY OVERVIEW
  • 9.5.2 COMPANY INSIGHTS
  • 9.5.3 PRODUCT BENCHMARKING
• 9.6 GUNTHER HEISSKANALTECHNIK GMBH
  • 9.6.1 COMPANY OVERVIEW
  • 9.6.2 PRODUCT BENCHMARKING
• 9.7 FAST HEAT, INC.
  • 9.7.1 COMPANY OVERVIEW
  • 9.7.2 PRODUCT BENCHMARKING
• 9.8 INCOE CORPORATION
  • 9.8.1 COMPANY OVERVIEW
  • 9.8.2 COMPANY INSIGHTS.
  • 9.8.3 PRODUCT BENCHMARKING
  • 9.8.4 KEY DEVELOPMENT
• 9.9 INGLASS S.P.A.
  • 9.9.1 COMPANY OVERVIEW
  • 9.9.2 PRODUCT BENCHMARKING
• 9.10 CACO PACIFIC CORPORATION
  • 9.10.1 COMPANY OVERVIEW
  • 9.10.2 COMPANY INSIGHTS
  • 9.10.3 PRODUCT BENCHMARKING