세계의 튜브형 저항기 시장 규모 : 제품별, 용도별, 지역별, 범위 및 예측

Tubular Resistors Market Size And Forecast

Tubular Resistors Market size is growing at a moderate pace with substantial growth rates over the last few years and is estimated that the market will grow significantly in the forecasted period i.e. 2021 to 2028.

The growing need for tubular resistors in applications like frequency conversion, high-frequency balancing, and snubbers is propelling this market forward. The Global Tubular Resistors Market report provides a holistic evaluation of the market. The report offers a comprehensive analysis of key segments, trends, drivers, restraints, competitive landscape, and factors that are playing a substantial role in the market.

Global Tubular Resistors Market Definition

In an electronic circuit, a resistor is an electrical component that controls or regulates the passage of electrical current. Resistors can also be used to supply a set voltage to an active device like a transistor. Tubular Non-Inductive Bulk Ceramic Resistors in Series 800 and 1000 provide outstanding performance for high peak power or high-energy pulses. Bulk construction generates a resistor that is naturally non-inductive and allows energy and power to be dispersed uniformly across the whole ceramic resistor body.

A pair of electrodes and leads are attached to a piece of conducting material to allow current to flow and make it into a practical resistor. To protect the conducting material from the surrounding environment and vice versa, the resistor is coated with an insulating layer. There are a variety of resistor construction methods and body designs or packages available, each tailored to a specific range of applied voltage, power dissipation, or other factors. Power electronics would not be complete without snubbers. Snubbers are small networks of elements that control the effects of circuit reactance in power-switching circuits. A snubber's primary role is to absorb energy from the power circuit's reactance.

The first way to classify snubber circuits is whether they absorb energy while managing voltage or current. The voltage across other circuit elements is controlled by a capacitor connected in parallel with them. The current through other circuit elements is controlled by an inductor connected in series with them. With the intention of reducing spike voltage at a switch node, an RC snubber circuit can be implemented. When a rectifying diode is turned off (when the high-side switch is on), the RC snubber circuit discharges the electric charge accumulated in the diode junction, as well as the parasitic inductance, parasitic capacitance, and inductance in the PCB trace, converting the voltage into heat through resistance to reduce spikes.

Global Tubular Resistors Market Overview

The growing demand for energy-efficient products and the requirement for increased power in electronic gadgets are driving the Tubular Resistors Market. Demand for high-voltage resistors, which are used in power supply and other applications, is on the rise. The growing demand for tubular resistors in various applications such as frequency conversion, high-frequency balancing, and snubbers, as well as the increasing use of tubular resistors in automotive applications such as airbags, seat belts, and brakes, will drive the expansion of this market.

Tubular resistors are employed in these applications because of their low profile and ability to be installed on PCBs without the need for additional components or space. The growing use of tubular resistors in industrial applications such as motors, generators, and transformers will all contribute to the market's growth. Market growth may be limited by heat dissipation of resistors and stability issues. To disperse the heat generated by higher power applications, bigger resistors are required. Wide tubular substrates have a large surface area for resistive materials to be applied to and are extremely durable. The mounting hardware for these huge resistors is required because they are not directly attached to the PCB board.

Wirewound and thick film technologies, for example, can be used on substrates. The wire-wound resistor is one of the most stable resistors, with tolerances as low as.1% commercially available. Wire-would resistors are made by wrapping a resistive wire around an insulated shape and then covering it with insulating material. A thin layer of resistive material is formed onto an insulated form to create film resistors. Carbon-film, metal-alloy, and metal-oxide are the three types of film resistors that are most widely employed. A metal film resistor is made by coating a ceramic cylinder with a metal film. The material 'cermet' is one of the most often utilized for these resistors. Cermet is a composite material made up of ceramic and metal components.

The majority of fixed resistors, both composition, and wire-wound, are packaged in a cylindrical form with axial leads. Resistors, both thick and thin, come in a range of shapes and sizes. Film resistor networks are packaged similarly to integrated circuits in plastic dual-in-line packages (DIP), single-in-line packages (SIP), flatpack packages, and circular metal packages. Chips and pellets can be used to package individual resistors. A chip is a small (typically square or oblong) piece of material that includes a circuit or component in microelectronics. Thick film resistors, which are deposited directly onto the circuit substrate, are often employed in hybrid circuits.

Global Tubular Resistors Market: Segmentation Analysis

The Global Tubular Resistors Market is Segmented on the basis of Product, Application, And Geography.

Tubular Resistors Market, By Product

• < 50 Ohms
• 50-200 Ohms
• 200-500 Ohms
• > 500 Ohms

Based on Product, The market is segmented into < 50 Ohms, 50-200 Ohms, 200-500 Ohms, and > 500 Ohms. The impedance corresponding to minimum loss, maximum power, and maximum voltage is 50 Ohms, which is the least terrible compromise. Indeed, 50 Ohms is close to the mean between 77 and 30 Ohms, and it's close to 60 Ohms, therefore it's reasonable to conclude that this is why the 50 Ohm impedance standard exists. However, with a PTFE-filled coaxial cable with minimal loss, the impedance with minimum loss is only about 50 Ohms.

Tubular Resistors Market, By Application

• Frequency Conversion
• High-Frequency Balancing
• Snubbers

Based on Application, The market is segmented into Frequency Conversion, High-Frequency Balancing, and Snubbers. An electrical device that transforms a sinusoidal input frequency into a proportionate current or output voltage is known as a frequency to voltage converter. Operational amplifiers and RC circuits are included in the basic circuit (Resistor Capacitor networks). Signal processing is done with operational amplifiers. The frequency converter has dynamic resistance, which is used to utilize some of the energy on the DC bus capacitance via brake resistance, avoiding the capacitor's high voltage.

Tubular Resistors Market, By Geography

• North America
• Europe
• Asia Pacific
• Rest of the world
• On the basis of Geography, The market is classified into North America, Europe, Asia Pacific, and the Rest of the world. The Asia Pacific region is expected to witness a significant CAGR during the forecast period.

Key Players

• The "Global Tubular Resistors Market" study report will provide a valuable insight with an emphasis on the global market including some of the major players such as
• Sandvik (Kanthal), Ohmite, Vishay, Danotherm, FRIZLEN, U.S. Resistor, Castle Power Solutions, TT Electronics, HVP, Renfrew Electric, and Ecomsa.

Our market analysis also entails a section solely dedicated to such major players wherein our analysts provide an insight into the financial statements of all the major players, along with its product benchmarking and SWOT analysis. The competitive landscape section also includes key development strategies, market share, and market ranking analysis of the above-mentioned players globally.

Key Developments

• SEP, 2021, AEC-Q200 approved and high-power thin-film wraparound chip resistors have been introduced by Vishay Intertechnology.
• Feb 2022, The LRMAP4026 series low resistance metal alloy power resistors from TT Electronics have four-terminal Kelvin precision and a high current capacity.

TABLE OF CONTENTS

1 INTRODUCTION OF GLOBAL TUBULAR RESISTORS MARKET

• 1.1 Overview of the Market
• 1.2 Scope of Report
• 1.3 Assumptions

2 EXECUTIVE SUMMARY

3 RESEARCH METHODOLOGY OF VERIFIED MARKET RESEARCH

• 3.1 Data Mining
• 3.2 Validation
• 3.3 Primary Interviews
• 3.4 List of Data Sources

4 GLOBAL TUBULAR RESISTORS MARKET OUTLOOK

• 4.1 Overview
• 4.2 Market Dynamics
  • 4.2.1 Drivers
  • 4.2.2 Restraints
  • 4.2.3 Opportunities
• 4.3 Porters Five Force Model
• 4.4 Value Chain Analysis

5 GLOBAL TUBULAR RESISTORS MARKET, BY PRODUCT

• 5.1 Overview
• 5.2 < 50 Ohms
• 5.3 50-200 Ohms
• 5.4 200-500 Ohms
• 5.5 > 500 Ohms

6 GLOBAL TUBULAR RESISTORS MARKET, BY APPLICATION

• 6.1 Overview
• 6.2 Frequency Conversion
• 6.3 High-Frequency Balancing
• 6.4 Snubbers

7 GLOBAL TUBULAR RESISTORS MARKET, BY GEOGRAPHY

• 7.1 Overview
• 7.2 North America
  • 7.2.1 U.S.
  • 7.2.2 Canada
  • 7.2.3 Mexico
• 7.3 Europe
  • 7.3.1 Germany
  • 7.3.2 U.K.
  • 7.3.3 France
  • 7.3.4 Rest of Europe
• 7.4 Asia Pacific
  • 7.4.1 China
  • 7.4.2 Japan
  • 7.4.3 India
  • 7.4.4 Rest of Asia Pacific
• 7.5 Rest of the World
  • 7.5.1 Latin America
  • 7.5.2 Middle East and Africa

8 GLOBAL TUBULAR RESISTORS MARKET COMPETITIVE LANDSCAPE

• 8.1 Overview
• 8.2 Company Market Ranking
• 8.3 Key Development Strategies

9 COMPANY PROFILES

• 9.1 Sandvik (Kanthal)
  • 9.1.1 Overview
  • 9.1.2 Financial Performance
  • 9.1.3 Product Outlook
  • 9.1.4 Key Developments
• 9.2 Ohmite
  • 9.2.1 Overview
  • 9.2.2 Financial Performance
  • 9.2.3 Product Outlook
  • 9.2.4 Key Developments
• 9.3 Vishay
  • 9.3.1 Overview
  • 9.3.2 Financial Performance
  • 9.3.3 Product Outlook
  • 9.3.4 Key Developments
• 9.4 Danotherm
  • 9.4.1 Overview
  • 9.4.2 Financial Performance
  • 9.4.3 Product Outlook
  • 9.4.4 Key Developments
• 9.5 FRIZLEN
  • 9.5.1 Overview
  • 9.5.2 Financial Performance
  • 9.5.3 Product Outlook
  • 9.5.4 Key Developments
• 9.6 U.S. Resistor
  • 9.6.1 Overview
  • 9.6.2 Financial Performance
  • 9.6.3 Product Outlook
  • 9.6.4 Key Developments
• 9.7 Castle Power Solutions
  • 9.7.1 Overview
  • 9.7.2 Financial Performance
  • 9.7.3 Product Outlook
  • 9.7.4 Key Developments
• 9.8 TT Electronics
  • 9.8.1 Overview
  • 9.8.2 Financial Performance
  • 9.8.3 Product Outlook
  • 9.8.4 Key Developments
• 9.9 HVP
  • 9.9.1 Overview
  • 9.9.2 Financial Performance
  • 9.9.3 Product Outlook
  • 9.9.4 Key Developments
• 9.10 Renfrew Electric
  • 9.10.1 Overview
  • 9.10.2 Financial Performance
  • 9.10.3 Product Outlook
  • 9.10.4 Key Developments
• 9.11 Ecomsa
  • 9.11.1 Overview
  • 9.11.2 Financial Performance
  • 9.11.3 Product Outlook
  • 9.11.4 Key Developments

10 Appendix

• 10.1 Related Research