발포제 시장 : 시장 규모, 점유율, 동향 및 성장 분석 보고서(2026-2034년)

The global foam blowing agents market size is expected to reach USD 4.84 Billion in 2034 from USD 2.85 Billion in 2025, growing at a CAGR of 6.05 during 2026-2034.This market is experiencing steady growth driven by increasing demand for lightweight and energy-efficient materials across construction, automotive, and packaging industries. Foam blowing agents are used to create cellular structures in materials such as polyurethane and polystyrene, providing insulation and reducing weight. The growing emphasis on energy efficiency and sustainability is significantly driving market growth. Additionally, the expansion of construction and automotive sectors is supporting the adoption of foam materials.

Major drivers include regulatory changes and advancements in chemical technologies. The shift toward environmentally friendly blowing agents with low global warming potential is encouraging innovation. The construction industry is a major contributor, with increasing use of insulation materials to improve energy efficiency in buildings. The automotive sector is also adopting foam materials to reduce vehicle weight and enhance performance.

Looking ahead, the market is expected to benefit from continued innovation and increasing demand for sustainable solutions. The development of advanced blowing agents with improved performance and reduced environmental impact will drive growth. Emerging markets are anticipated to witness significant expansion due to infrastructure development and industrialization. As industries continue to prioritize efficiency and sustainability, the foam blowing agents market is set for sustained growth.

Our reports are carefully developed to deliver comprehensive and actionable insights across a wide range of industries and markets. Each report includes several essential components designed to provide a complete understanding of the market environment:

Market Overview: This section provides a clear introduction to the market, including key definitions, classifications, and an overview of the current industry landscape.

Market Dynamics: A detailed evaluation of the primary drivers, restraints, opportunities, and challenges shaping market growth. It covers factors such as technological developments, regulatory frameworks, and evolving industry trends.

Segmentation Analysis: A structured breakdown of the market into key segments based on product type, application, end-user, and geographic region. This section highlights the performance, growth potential, and contribution of each segment.

Competitive Landscape: An in-depth assessment of leading market participants, including their market positioning, product portfolios, strategic initiatives, and financial performance. It provides valuable insights into competitive dynamics and the strategies adopted by key players.

Market Forecast: Data-driven projections of market size and growth patterns over a defined forecast period. This section incorporates historical trends, current market conditions, and quantitative analysis to illustrate expected future developments.

Regional Analysis: A comprehensive review of market performance across major geographic regions, identifying high-growth areas and regional trends to better understand localized market opportunities.

Emerging Trends and Opportunities: Identification of significant market trends, technological advancements, and new investment opportunities. This section highlights potential growth areas and future industry developments.

Customization Options: We offer flexible customization services to tailor reports according to specific client requirements. This may include additional segmentation, country-level analysis, competitor profiling, customized data points, or focused insights on particular market segments to better support strategic decision-making.

MARKET SEGMENTATION

By Product Type

• HC
• HFC & HCFC
• Blends
• HFO
• Methylal and Methyl Formate
• Others (Liquid CO2 and Water)

By Application

• Polyurethane Foams
• Polystyrene Foams
• Phenolic Foams
• Others (PVC Foams, Polyisocyanurate Foams, etc.)

By End-Use

• Building and Construction
• Electrical and Electronics
• Furniture and Bedding
• Automotive
• Footwear
• Others (Textiles, Medical, etc)

COMPANIES PROFILED

• Honeywell International Inc., Arkema S.A., E.I DuPont de Nemours (DuPont), Linde Group, The Chemours Company, Solvay S.A., Foam Supplies, Inc., HCS Group GmbH, Marubeni Corporation, Guangzhou Jiangyan Chemical Co., Ltd

TABLE OF CONTENTS

Chapter 1. PREFACE

• 1.1. Market Segmentation & Scope
• 1.2. Market Definition
• 1.3. Information Procurement
  • 1.3.1 Information Analysis
  • 1.3.2 Market Formulation & Data Visualization
  • 1.3.3 Data Validation & Publishing
• 1.4. Research Scope and Assumptions
  • 1.4.1 List of Data Sources

Chapter 2. EXECUTIVE SUMMARY

• 2.1. Market Snapshot
• 2.2. Segmental Outlook
• 2.3. Competitive Outlook

Chapter 3. MARKET VARIABLES, TRENDS, FRAMEWORK

• 3.1. Market Lineage Outlook
• 3.2. Penetration & Growth Prospect Mapping
• 3.3. Value Chain Analysis
• 3.4. Regulatory Framework
  • 3.4.1 Standards & Compliance
  • 3.4.2 Regulatory Impact Analysis
• 3.5. Market Dynamics
  • 3.5.1 Market Drivers
  • 3.5.2 Market Restraints
  • 3.5.3 Market Opportunities
  • 3.5.4 Market Challenges
• 3.6. Porter's Five Forces Analysis
• 3.7. PESTLE Analysis

Chapter 4. GLOBAL FOAM BLOWING AGENTS MARKET: BY PRODUCT TYPE 2022-2034 (USD MN and Kilo Tons)

• 4.1. Market Analysis, Insights and Forecast Product Type
• 4.2. HC Estimates and Forecasts By Regions 2022-2034 (USD MN and Kilo Tons)
• 4.3. HFC & HCFC Estimates and Forecasts By Regions 2022-2034 (USD MN and Kilo Tons)
• 4.4. Blends Estimates and Forecasts By Regions 2022-2034 (USD MN and Kilo Tons)
• 4.5. HFO Estimates and Forecasts By Regions 2022-2034 (USD MN and Kilo Tons)
• 4.6. Methylal and Methyl Formate Estimates and Forecasts By Regions 2022-2034 (USD MN and Kilo Tons)
• 4.7. Others (Liquid CO2 and Water) Estimates and Forecasts By Regions 2022-2034 (USD MN and Kilo Tons)

Chapter 5. GLOBAL FOAM BLOWING AGENTS MARKET: BY APPLICATION 2022-2034 (USD MN and Kilo Tons)

• 5.1. Market Analysis, Insights and Forecast Application
• 5.2. Polyurethane Foams Estimates and Forecasts By Regions 2022-2034 (USD MN and Kilo Tons)
• 5.3. Polystyrene Foams Estimates and Forecasts By Regions 2022-2034 (USD MN and Kilo Tons)
• 5.4. Phenolic Foams Estimates and Forecasts By Regions 2022-2034 (USD MN and Kilo Tons)
• 5.5. Others (PVC Foams, Polyisocyanurate Foams, etc.) Estimates and Forecasts By Regions 2022-2034 (USD MN and Kilo Tons)

Chapter 6. GLOBAL FOAM BLOWING AGENTS MARKET: BY END-USE 2022-2034 (USD MN and Kilo Tons)

• 6.1. Market Analysis, Insights and Forecast End-use
• 6.2. Building and Construction Estimates and Forecasts By Regions 2022-2034 (USD MN and Kilo Tons)
• 6.3. Electrical and Electronics Estimates and Forecasts By Regions 2022-2034 (USD MN and Kilo Tons)
• 6.4. Furniture and Bedding Estimates and Forecasts By Regions 2022-2034 (USD MN and Kilo Tons)
• 6.5. Automotive Estimates and Forecasts By Regions 2022-2034 (USD MN and Kilo Tons)
• 6.6. Footwear Estimates and Forecasts By Regions 2022-2034 (USD MN and Kilo Tons)
• 6.7. Others (Textiles, Medical, etc) Estimates and Forecasts By Regions 2022-2034 (USD MN and Kilo Tons)

Chapter 7. GLOBAL FOAM BLOWING AGENTS MARKET: BY REGION 2022-2034 (USD MN and Kilo Tons)

• 7.1. Regional Outlook
• 7.2. North America Market Analysis, Insights and Forecast, 2022-2034 (USD MN and Kilo Tons)
  • 7.2.1 By Product Type
  • 7.2.2 By Application
  • 7.2.3 By End-use
  • 7.2.4 United States
  • 7.2.5 Canada
  • 7.2.6 Mexico
• 7.3. Europe Market Analysis, Insights and Forecast, 2022-2034 (USD MN and Kilo Tons)
  • 7.3.1 By Product Type
  • 7.3.2 By Application
  • 7.3.3 By End-use
  • 7.3.4 United Kingdom
  • 7.3.5 France
  • 7.3.6 Germany
  • 7.3.7 Italy
  • 7.3.8 Russia
  • 7.3.9 Rest Of Europe
• 7.4. Asia-Pacific Market Analysis, Insights and Forecast, 2022-2034 (USD MN and Kilo Tons)
  • 7.4.1 By Product Type
  • 7.4.2 By Application
  • 7.4.3 By End-use
  • 7.4.4 India
  • 7.4.5 Japan
  • 7.4.6 South Korea
  • 7.4.7 Australia
  • 7.4.8 South East Asia
  • 7.4.9 Rest Of Asia Pacific
• 7.5. Latin America Market Analysis, Insights and Forecast, 2022-2034 (USD MN and Kilo Tons)
  • 7.5.1 By Product Type
  • 7.5.2 By Application
  • 7.5.3 By End-use
  • 7.5.4 Brazil
  • 7.5.5 Argentina
  • 7.5.6 Peru
  • 7.5.7 Chile
  • 7.5.8 Rest of Latin America
• 7.6. Middle East & Africa Market Analysis, Insights and Forecast, 2022-2034 (USD MN and Kilo Tons)
  • 7.6.1 By Product Type
  • 7.6.2 By Application
  • 7.6.3 By End-use
  • 7.6.4 Saudi Arabia
  • 7.6.5 UAE
  • 7.6.6 Israel
  • 7.6.7 South Africa
  • 7.6.8 Rest of the Middle East And Africa

Chapter 8. COMPETITIVE LANDSCAPE

• 8.1. Recent Developments
• 8.2. Company Categorization
• 8.3. Supply Chain & Channel Partners (based on availability)
• 8.4. Market Share & Positioning Analysis (based on availability)
• 8.5. Vendor Landscape (based on availability)
• 8.6. Strategy Mapping

Chapter 9. COMPANY PROFILES OF GLOBAL FOAM BLOWING AGENTS INDUSTRY

• 9.1. Top Companies Market Share Analysis
• 9.2. Company Profiles
  • 9.2.1 Honeywell International Inc
  • 9.2.2 Arkema S.A
  • 9.2.3 E.I DuPont De Nemours (DuPont)
  • 9.2.4 Linde Group
  • 9.2.5 The Chemours Company
  • 9.2.6 Solvay S.A
  • 9.2.7 Foam SuppliesInc
  • 9.2.8 HCS Group GmbH
  • 9.2.9 Marubeni Corporation
  • 9.2.10 Guangzhou Jiangyan Chemical Co., Ltd