자동차 및 항공우주용 철강 시장 : 시장 기회, 성장 요인, 산업 동향 분석 및 예측(2026-2035년)

The Global Automotive & Aerospace Steel Market was valued at USD 151.5 billion in 2025 and is estimated to grow at a CAGR of 4% to reach USD 227.7 billion by 2035.

The market is undergoing a period of structural transformation driven by rising demand for high-performance materials that support evolving mobility and aerospace requirements. While aerospace steel represents a smaller share by volume compared to automotive applications, it delivers significantly higher value per ton due to its reliance on specialized, high-strength steel grades engineered for extreme performance conditions. Investments in next-generation vehicles and more fuel-efficient aircraft platforms are accelerating demand for advanced high-strength steels and specialty alloys offering superior corrosion resistance, fatigue endurance, and structural reliability. In the automotive sector, tightening emissions regulations and lightweighting mandates are pushing manufacturers to reduce vehicle mass without compromising safety. As a result, steel producers are increasingly supplying advanced grades optimized for body structures and safety-critical components, enabling manufacturers to meet regulatory compliance while maintaining cost efficiency and structural integrity.

The carbon steel segment accounted for 33.8% share in 2025 and is expected to grow at a CAGR of 3.8% through 2035. Its widespread adoption is supported by low production costs, strong recyclability, and adaptability across a wide range of automotive and aerospace structural applications. Carbon steel continues to play a dominant role in cost-sensitive vehicle segments where affordability, durability, and manufacturability remain primary considerations. Its favorable strength-to-cost ratio makes it suitable for stamped components, reinforcements, and load-bearing structures when ultra-high performance is not required.

The automotive segment held 75.4% share in 2025 and is forecast to grow at a CAGR of 3.8% from 2026 to 2035. Automotive manufacturing represents the largest source of steel consumption, supported by sustained global vehicle production and increasing material intensity per vehicle. Steel remains a core structural material across vehicle platforms, with rising use in safety systems, structural reinforcements, and electric vehicle architectures. The growing emphasis on crash performance, battery protection, and structural rigidity is reinforcing long-term steel demand within the automotive sector.

Europe Automotive & Aerospace Steel Market generated USD 33 billion in 2025 and is expected to register strong growth over the forecast period. Regional expansion is supported by climate-focused industrial policies, increasing adoption of low-emission steel production, and rising demand for advanced steel grades. Automotive manufacturers in the region are increasingly sourcing low-carbon and advanced high-strength steels to align with emission reduction targets, while aerospace activity continues to benefit from sustained investment in commercial and defense aviation programs. These factors collectively support steady steel demand across multiple high-value applications.

Key companies operating in the Global Automotive & Aerospace Steel Market include ArcelorMittal, POSCO, Tata Steel, Nucor Corporation, Hyundai Steel, Nippon Steel & Sumitomo Metal Corporation, ThyssenKrupp AG, United States Steel Corporation, JFE Steel Corporation, Baosteel Group, Gerdau S/A, Steel Dynamics, Inc., China Steel Corporation, Outokumpu Oyj, Acerinox S.A., Kobe Steel, Ltd., Jindal Steel & Power Ltd., Daido Steel Co., Ltd., Commercial Metals Company, NJR Steel, Celsa Steel UK, Mechel OAO, Jiangsu Shagang Group, Steel Authority of India Limited, and Essar Steel. Companies in the automotive and aerospace steel market are strengthening their market position by investing in advanced metallurgy and next-generation steel grades that balance strength, weight reduction, and sustainability. Manufacturers are expanding production of advanced high-strength and specialty steels to meet evolving OEM specifications. Strategic partnerships with automotive and aerospace manufacturers are helping secure long-term supply contracts and improve product customization. Firms are also investing in low-carbon steelmaking technologies to align with regulatory requirements and sustainability goals.

Table of Contents

Chapter 1 Methodology & Scope

• 1.1 Market scope and definition
• 1.2 Research design
  • 1.2.1 Research approach
  • 1.2.2 Data collection methods
• 1.3 Data mining sources
  • 1.3.1 Global
  • 1.3.2 Regional/Country
• 1.4 Base estimates and calculations
  • 1.4.1 Base year calculation
  • 1.4.2 Key trends for market estimation
• 1.5 Primary research and validation
  • 1.5.1 Primary sources
• 1.6 Forecast model
• 1.7 Research assumptions and limitations

Chapter 2 Executive Summary

• 2.1 Industry 360° synopsis
• 2.2 Key market trends
  • 2.2.1 Regional
  • 2.2.2 Material type
  • 2.2.3 Product form
  • 2.2.4 Application
• 2.3 TAM Analysis, 2026-2035
• 2.4 CXO perspectives: Strategic imperatives
  • 2.4.1 Executive decision points
  • 2.4.2 Critical success factors
• 2.5 Future outlook and strategic recommendations

Chapter 3 Industry Insights

• 3.1 Industry ecosystem analysis
  • 3.1.1 Supplier landscape
  • 3.1.2 Profit margin
  • 3.1.3 Value addition at each stage
  • 3.1.4 Factor affecting the value chain
  • 3.1.5 Disruptions
• 3.2 Industry impact forces
  • 3.2.1 Growth drivers
  • 3.2.2 Industry pitfalls and challenges
  • 3.2.3 Market opportunities
• 3.3 Growth potential analysis
• 3.4 Regulatory landscape
  • 3.4.1 North America
  • 3.4.2 Europe
  • 3.4.3 Asia Pacific
  • 3.4.4 Latin America
  • 3.4.5 Middle East & Africa
• 3.5 Porter's analysis
• 3.6 PESTEL analysis
• 3.7 Price trends
  • 3.7.1 By region
  • 3.7.2 By material type
• 3.8 Future market trends
• 3.9 Technology and Innovation landscape
  • 3.9.1 Current technological trends
  • 3.9.2 Emerging technologies
• 3.10 Patent Landscape
• 3.11 Trade statistics (HS code) ( Note: the trade statistics will be provided for key countries only)
  • 3.11.1 Major importing countries
  • 3.11.2 Major exporting countries
• 3.12 Sustainability and environmental aspects
  • 3.12.1 Sustainable practices
  • 3.12.2 Waste reduction strategies
  • 3.12.3 Energy efficiency in production
  • 3.12.4 Eco-friendly initiatives
• 3.13 Carbon footprint consideration

Chapter 4 Competitive Landscape, 2025

• 4.1 Introduction
• 4.2 Company market share analysis
  • 4.2.1 By region
    • 4.2.1.1 North America
    • 4.2.1.2 Europe
    • 4.2.1.3 Asia Pacific
    • 4.2.1.4 LATAM
    • 4.2.1.5 MEA
• 4.3 Company matrix analysis
• 4.4 Competitive analysis of major market players
• 4.5 Competitive positioning matrix
• 4.6 Key developments
  • 4.6.1 Mergers & acquisitions
  • 4.6.2 Partnerships & collaborations
  • 4.6.3 New Product Launches
  • 4.6.4 Expansion Plans

Chapter 5 Market Estimates and Forecast, By Material Type, 2022-2035 (USD Billion) (Kilo Tons)

• 5.1 Key trends
• 5.2 Carbon Steel
• 5.3 Alloy Steel
• 5.4 Stainless Steel
• 5.5 Tool Steel
• 5.6 Advanced High-Strength Steel (AHSS)
• 5.7 Maraging Steel
• 5.8 Others

Chapter 6 Market Estimates and Forecast, By Product Form, 2022-2035 (USD Billion) (Kilo Tons)

• 6.1 Key trends
• 6.2 Flat Steel Products
  • 6.2.1 Hot Rolled Sheets/Coils
  • 6.2.2 Cold Rolled Sheets/Coils
  • 6.2.3 Galvanized Steel (GI, GA)
  • 6.2.4 Electro-Galvanized Sheets
• 6.3 Long Steel Products
  • 6.3.1 Wire Rods
  • 6.3.2 Rebars
  • 6.3.3 Structural Sections
• 6.4 Pipes & Tubes
  • 6.4.1 Seamless Pipes
  • 6.4.2 Welded Pipes
  • 6.4.3 Precision Tubes
• 6.5 Bars & Rods
  • 6.5.1 Round Bars
  • 6.5.2 Flat Bars
  • 6.5.3 Square/Hex Bars
• 6.6 Forgings
  • 6.6.1 Open-Die Forgings
  • 6.6.2 Closed-Die Forgings
  • 6.6.3 Ring Forgings
• 6.7 Castings
  • 6.7.1 Investment Castings
  • 6.7.2 Sand Castings
  • 6.7.3 Die Castings
• 6.8 Plates & Sheets
  • 6.8.1 Quenched & Tempered Plates
  • 6.8.2 Abrasion-Resistant Plates
  • 6.8.3 Pressure Vessel Plates
• 6.9 Clad & Coated Steel
  • 6.9.1 Zinc-Coated Steel
  • 6.9.2 Aluminum-Coated Steel
  • 6.9.3 Organic Coated Steel
• 6.10 Foils & Strips
  • 6.10.1 Ultra-Thin Foils
  • 6.10.2 Laminated Strips

Chapter 7 Market Estimates and Forecast, By Application, 2022-2035 (USD Billion) (Kilo Tons)

• 7.1 Key trends
• 7.2 Automotive
  • 7.2.1 Body-in-White (BIW)
  • 7.2.2 Chassis & Suspension
  • 7.2.3 Powertrain & Engine Components
  • 7.2.4 Exhaust System
  • 7.2.5 Drivetrain Components
  • 7.2.6 Safety Structures
  • 7.2.7 EV Components
  • 7.2.8 Structural Reinforcements
  • 7.2.9 Interiors & Seating
  • 7.2.10 Fasteners & Small Components
  • 7.2.11 Others
• 7.3 Aerospace
  • 7.3.1 Airframe Structures
  • 7.3.2 Landing Gear Systems
  • 7.3.3 Jet Engine Components
  • 7.3.4 Hydraulic & Fuel Systems
  • 7.3.5 Fasteners & Connectors
  • 7.3.6 Cabin Interior Structures
  • 7.3.7 Military & Defense Aircraft Components
  • 7.3.8 Spacecraft & Satellite Components
  • 7.3.9 Others

Chapter 8 Market Estimates and Forecast, By Region, 2022-2035 (USD Billion) (Kilo Tons)

• 8.1 Key trends
• 8.2 North America
  • 8.2.1 U.S.
  • 8.2.2 Canada
• 8.3 Europe
  • 8.3.1 Germany
  • 8.3.2 UK
  • 8.3.3 France
  • 8.3.4 Spain
  • 8.3.5 Italy
  • 8.3.6 Rest of Europe
• 8.4 Asia Pacific
  • 8.4.1 China
  • 8.4.2 India
  • 8.4.3 Japan
  • 8.4.4 Australia
  • 8.4.5 South Korea
  • 8.4.6 Rest of Asia Pacific
• 8.5 Latin America
  • 8.5.1 Brazil
  • 8.5.2 Mexico
  • 8.5.3 Argentina
  • 8.5.4 Rest of Latin America
• 8.6 Middle East and Africa
  • 8.6.1 Saudi Arabia
  • 8.6.2 South Africa
  • 8.6.3 UAE
  • 8.6.4 Rest of Middle East and Africa

Chapter 9 Company Profiles

• 9.1 Acerinox S.A.
• 9.2 ArcelorMittal
• 9.3 Baosteel Group
• 9.4 Celsa Steel UK
• 9.5 China Steel Corporation
• 9.6 Commercial Metals Company
• 9.7 Daido Steel Co., Ltd.
• 9.8 Essar Steel
• 9.9 Gerdau S/A
• 9.10 Hyundai Steel
• 9.11 JFE Steel Corporation
• 9.12 Jiangsu Shagang Group
• 9.13 Jindal Steel & Power Ltd.
• 9.14 Kobe Steel. Ltd.
• 9.15 Mechel OAO
• 9.16 Nippon Steel & Sumitomo Metal Corporation
• 9.17 NJR Steel
• 9.18 Nucor Corporation
• 9.19 Outokumpu Oyj
• 9.20 POSCO
• 9.21 Steel Authority of India Limited (SAIL)
• 9.22 Steel Dynamics, Inc.
• 9.23 Tata Steel
• 9.24 ThyssenKrupp AG
• 9.25 United States Steel Corporation
• 9.26 Others