항공우주용 플라스틱 시장 : 재료별, 항공기 유형별, 용도별, 지역별(2025-2033년)

The global aerospace plastics market size reached USD 21.8 Billion in 2024. Looking forward, IMARC Group expects the market to reach USD 37.4 Billion by 2033, exhibiting a growth rate (CAGR) of 5.89% during 2025-2033. The increasing air traffic, the rising demand for lightweight and more proficient aircraft, and extensive research and development (R&D) activities represent some of the key factors driving the market.

Aerospace plastics are lightweight polymers used for several aerospace applications. They are extremely light in weight and are high-performance plastics for thermal, acoustic, and chemical resistance in aircraft. Polyether ether ketone (PEEK), acrylonitrile butadiene styrene (ABS), poly carbonates (PC), and polyphenylene sulfide (PPS) are some of the commonly used aerospace plastics. These plastics are used on aircraft structural components, including wing ribs and spars, fuel tank covers, landing gear hubcaps, pylon fairings, and radomes. Aerospace plastics are also used for designing and manufacturing avionics sensor plates, electronic component mounting brackets, and ventilation impeller blades. They exhibit toughness, high-temperature tolerance, excellent transparency, and chemical and impact resistance, and stand up to vibration and abrasion.

Aerospace Plastics Market Trends:

The increasing demand for lightweight and more proficient aircraft across the globe is one of the key factors driving the market growth. Aerospace plastics are widely used as they are lighter and bear high strength, which assists in the proper distribution of weight and balance system. In line with this, key manufacturers are focusing on the reduction of the overall weight of the aircraft while maintaining or even improving its total load-carrying capacity, which, in turn, is favoring the market growth. Moreover, the widespread product adoption to manufacture several cabin components, including cabin operations, air ducts, floor panels, and overhead luggage bins, is acting as another growth-inducing factor. Apart from this, the introduction of materials providing thermal stability as planes operate at variable temperatures and require high thermal stability is providing an impetus to the market growth. Furthermore, the increasing application of aerospace plastics in retrofitting activities of old aircraft cabins and individual seats, as they are cost-effective solutions, is propelling the market growth. Additionally, the rising product demand due to the adoption of advanced air traffic control and high-speed data transmission systems, is positively influencing the market growth. Along with this, the increasing utilization of ABS owing to its various advantages, such as excellent mechanical strength, durability, cost-effectiveness, and ease of installation properties, is providing a considerable boost to the market growth. Other factors, including the introduction of in-flight entertainment, increasing air traffic, extensive research and development (R&D) activities, the strong presence of aircraft manufacturers, and the rising demand for business jets and helicopters, are anticipated to drive the market growth further.

Key Market Segmentation:

Material Insights:

• Acrylonitrile Butadiene Styrene (ABS)
• Polyether Ether Ketone (PEEK)
• Polymethyl Methacrylate (PMMA)
• Poly Carbonates (PC)
• Polyphenylene Sulfide (PPS)
• Others

Aircraft Type Insights:

• Commercial
• Military
• Rotorcraft
• Spacecraft
• Others

Application Insights:

• Cabin Interior
• Windows and Windshield
• Airframe
• Propulsion System
• Others

Regional Insights:

• North America
• United States
• Canada
• Europe
• Germany
• France
• United Kingdom
• Italy
• Spain
• Russia
• Others
• Asia Pacific
• China
• Japan
• India
• South Korea
• Australia
• Indonesia
• Others
• Latin America
• Brazil
• Mexico
• Others
• Middle East and Africa
• The report has also provided a comprehensive analysis of all the major regional markets that include North America (the United States and Canada); Asia Pacific (China, Japan, India, South Korea, Australia, Indonesia, and others); Europe (Germany, France, the United Kingdom, Italy, Spain, Russia, and others); Latin America (Brazil, Mexico, and others); and Middle East and Africa. According to the report, North America was the largest market for aerospace plastics. Some of the factors driving the North America aerospace plastics market included extensive research and development (R&D) activities, the strong presence of aircraft manufacturers, and increasing air traffic.

Competitive Landscape:

• The report has also provided a comprehensive analysis of the competitive landscape in the global aerospace plastics market. Detailed profiles of all major companies have also been provided. Some of the companies covered include BASF SE, Drake Plastics Ltd. Co., DuPont de Nemours Inc., Ensinger GmbH, Mitsubishi Chemical Corporation, Polyfluor Plastics bv, PPG Industries Inc., Rochling SE & Co. KG, Saudi Basic Industries Corporation (Saudi Arabian Oil Co.), Solvay SA, Victrex plc, Zeus Industrial Products Inc., etc.

Key Questions Answered in This Report:

• How has the global aerospace plastics market performed so far and how will it perform in the coming years?
• What are the drivers, restraints, and opportunities in the global aerospace plastics market?
• What are the key regional markets?
• Which countries represent the most attractive aerospace plastics markets?
• What is the breakup of the market based on the material?
• What is the breakup of the market based on the aircraft type?
• What is the breakup of the market based on the application?
• What is the competitive structure of the global aerospace plastics market?
• Who are the key players/companies in the global aerospace plastics market?

Table of Contents

1 Preface

2 Scope and Methodology

• 2.1 Objectives of the Study
• 2.2 Stakeholders
• 2.3 Data Sources
  • 2.3.1 Primary Sources
  • 2.3.2 Secondary Sources
• 2.4 Market Estimation
  • 2.4.1 Bottom-Up Approach
  • 2.4.2 Top-Down Approach
• 2.5 Forecasting Methodology

3 Executive Summary

4 Introduction

• 4.1 Overview
• 4.2 Key Industry Trends

5 Global Aerospace Plastics Market

• 5.1 Market Overview
• 5.2 Market Performance
• 5.3 Impact of COVID-19
• 5.4 Market Forecast

6 Market Breakup by Material

• 6.1 Acrylonitrile Butadiene Styrene (ABS)
  • 6.1.1 Market Trends
  • 6.1.2 Market Forecast
• 6.2 Polyether Ether Ketone (PEEK)
  • 6.2.1 Market Trends
  • 6.2.2 Market Forecast
• 6.3 Polymethyl Methacrylate (PMMA)
  • 6.3.1 Market Trends
  • 6.3.2 Market Forecast
• 6.4 Poly Carbonates (PC)
  • 6.4.1 Market Trends
  • 6.4.2 Market Forecast
• 6.5 Polyphenylene Sulfide (PPS)
  • 6.5.1 Market Trends
  • 6.5.2 Market Forecast
• 6.6 Others
  • 6.6.1 Market Trends
  • 6.6.2 Market Forecast

7 Market Breakup by Aircraft Type

• 7.1 Commercial
  • 7.1.1 Market Trends
  • 7.1.2 Market Forecast
• 7.2 Military
  • 7.2.1 Market Trends
  • 7.2.2 Market Forecast
• 7.3 Rotorcraft
  • 7.3.1 Market Trends
  • 7.3.2 Market Forecast
• 7.4 Spacecraft
  • 7.4.1 Market Trends
  • 7.4.2 Market Forecast
• 7.5 Others
  • 7.5.1 Market Trends
  • 7.5.2 Market Forecast

8 Market Breakup by Application

• 8.1 Cabin Interior
  • 8.1.1 Market Trends
  • 8.1.2 Market Forecast
• 8.2 Windows and Windshield
  • 8.2.1 Market Trends
  • 8.2.2 Market Forecast
• 8.3 Airframe
  • 8.3.1 Market Trends
  • 8.3.2 Market Forecast
• 8.4 Propulsion System
  • 8.4.1 Market Trends
  • 8.4.2 Market Forecast
• 8.5 Others
  • 8.5.1 Market Trends
  • 8.5.2 Market Forecast

9 Market Breakup by Region

• 9.1 North America
  • 9.1.1 United States
    • 9.1.1.1 Market Trends
    • 9.1.1.2 Market Forecast
  • 9.1.2 Canada
    • 9.1.2.1 Market Trends
    • 9.1.2.2 Market Forecast
• 9.2 Asia-Pacific
  • 9.2.1 China
    • 9.2.1.1 Market Trends
    • 9.2.1.2 Market Forecast
  • 9.2.2 Japan
    • 9.2.2.1 Market Trends
    • 9.2.2.2 Market Forecast
  • 9.2.3 India
    • 9.2.3.1 Market Trends
    • 9.2.3.2 Market Forecast
  • 9.2.4 South Korea
    • 9.2.4.1 Market Trends
    • 9.2.4.2 Market Forecast
  • 9.2.5 Australia
    • 9.2.5.1 Market Trends
    • 9.2.5.2 Market Forecast
  • 9.2.6 Indonesia
    • 9.2.6.1 Market Trends
    • 9.2.6.2 Market Forecast
  • 9.2.7 Others
    • 9.2.7.1 Market Trends
    • 9.2.7.2 Market Forecast
• 9.3 Europe
  • 9.3.1 Germany
    • 9.3.1.1 Market Trends
    • 9.3.1.2 Market Forecast
  • 9.3.2 France
    • 9.3.2.1 Market Trends
    • 9.3.2.2 Market Forecast
  • 9.3.3 United Kingdom
    • 9.3.3.1 Market Trends
    • 9.3.3.2 Market Forecast
  • 9.3.4 Italy
    • 9.3.4.1 Market Trends
    • 9.3.4.2 Market Forecast
  • 9.3.5 Spain
    • 9.3.5.1 Market Trends
    • 9.3.5.2 Market Forecast
  • 9.3.6 Russia
    • 9.3.6.1 Market Trends
    • 9.3.6.2 Market Forecast
  • 9.3.7 Others
    • 9.3.7.1 Market Trends
    • 9.3.7.2 Market Forecast
• 9.4 Latin America
  • 9.4.1 Brazil
    • 9.4.1.1 Market Trends
    • 9.4.1.2 Market Forecast
  • 9.4.2 Mexico
    • 9.4.2.1 Market Trends
    • 9.4.2.2 Market Forecast
  • 9.4.3 Others
    • 9.4.3.1 Market Trends
    • 9.4.3.2 Market Forecast
• 9.5 Middle East and Africa
  • 9.5.1 Market Trends
  • 9.5.2 Market Breakup by Country
  • 9.5.3 Market Forecast

10 Drivers, Restraints, and Opportunities

• 10.1 Overview
• 10.2 Drivers
• 10.3 Restraints
• 10.4 Opportunities

11 Value Chain Analysis

12 Porters Five Forces Analysis

• 12.1 Overview
• 12.2 Bargaining Power of Buyers
• 12.3 Bargaining Power of Suppliers
• 12.4 Degree of Competition
• 12.5 Threat of New Entrants
• 12.6 Threat of Substitutes

13 Price Analysis

14 Competitive Landscape

• 14.1 Market Structure
• 14.2 Key Players
• 14.3 Profiles of Key Players
  • 14.3.1 BASF SE
    • 14.3.1.1 Company Overview
    • 14.3.1.2 Product Portfolio
    • 14.3.1.3 Financials
    • 14.3.1.4 SWOT Analysis
  • 14.3.2 Drake Plastics Ltd. Co.
    • 14.3.2.1 Company Overview
    • 14.3.2.2 Product Portfolio
  • 14.3.3 DuPont de Nemours Inc.
    • 14.3.3.1 Company Overview
    • 14.3.3.2 Product Portfolio
    • 14.3.3.3 Financials
    • 14.3.3.4 SWOT Analysis
  • 14.3.4 Ensinger GmbH
    • 14.3.4.1 Company Overview
    • 14.3.4.2 Product Portfolio
  • 14.3.5 Mitsubishi Chemical Corporation
    • 14.3.5.1 Company Overview
    • 14.3.5.2 Product Portfolio
    • 14.3.5.3 Financials
    • 14.3.5.4 SWOT Analysis
  • 14.3.6 Polyfluor Plastics bv
    • 14.3.6.1 Company Overview
    • 14.3.6.2 Product Portfolio
  • 14.3.7 PPG Industries Inc.
    • 14.3.7.1 Company Overview
    • 14.3.7.2 Product Portfolio
    • 14.3.7.3 Financials
    • 14.3.7.4 SWOT Analysis
  • 14.3.8 Rochling SE & Co. KG
    • 14.3.8.1 Company Overview
    • 14.3.8.2 Product Portfolio
  • 14.3.9 Saudi Basic Industries Corporation (Saudi Arabian Oil Co.)
    • 14.3.9.1 Company Overview
    • 14.3.9.2 Product Portfolio
    • 14.3.9.3 Financials
    • 14.3.9.4 SWOT Analysis
  • 14.3.10 Solvay SA
    • 14.3.10.1 Company Overview
    • 14.3.10.2 Product Portfolio
    • 14.3.10.3 Financials
    • 14.3.10.4 SWOT Analysis
  • 14.3.11 Victrex plc
    • 14.3.11.1 Company Overview
    • 14.3.11.2 Product Portfolio
    • 14.3.11.3 Financials
  • 14.3.12 Zeus Industrial Products Inc.
    • 14.3.12.1 Company Overview
    • 14.3.12.2 Product Portfolio

Kindly note that this only represents a partial list of companies, and the complete list has been provided in the report.