복합 공구 시장 : 수지 유형, 섬유 유형, 형상 유형, 용도별 - 세계 예측(2025-2030년)

The Composite Tooling Market was valued at USD 1.11 billion in 2023, expected to reach USD 1.24 billion in 2024, and is projected to grow at a CAGR of 11.88%, to USD 2.44 billion by 2030.

Composite tooling refers to the production and development of tools used in the manufacturing of composite materials, which are comprised of two or more constituent materials with significantly different physical or chemical properties. The necessity of composite tooling arises from the growing demand for lightweight, durable, and high-performance materials across various industries such as aerospace, automotive, and wind energy. Its applications are predominantly found in layup tools, prototype tools, and curing molds. End-use industries leverage composite tooling for its ability to produce complex geometries and enhance material efficiency, making it essential for innovative design and manufacturing processes.

In terms of market insights, one of the key growth drivers is the increasing adoption of composite materials in the aerospace and defense sectors due to performance advantages such as high strength-to-weight ratios and resistance to corrosion. Additionally, the automotive industry is embracing composite tooling to meet stringent environmental regulations demanding increased fuel efficiency through weight reduction. The construction of infrastructures using composite materials is also contributing to market demand. Potential opportunities lie in the continuous development of advanced materials and manufacturing technologies like additive manufacturing and digital twins that could revolutionize tooling processes by reducing lead times and costs. However, challenges such as the high initial capital investment and technical complexities in handling composite materials can impede market growth. Furthermore, supply chain disruptions and inconsistent quality during large-scale production pose significant barriers.

To navigate these challenges, innovation should focus on enhancing the durability and cost-effectiveness of composite tooling materials and processes. Research areas such as automation in composite fabrication, as well as the development of eco-friendly and recyclable composites, present opportunities for business growth. The market is inherently dynamic and competitive, necessitating a focus on collaborative R&D efforts, strategic partnerships, and investments in cutting-edge tooling technologies to maintain a competitive edge.

Market Dynamics: Unveiling Key Market Insights in the Rapidly Evolving Composite Tooling Market

The Composite Tooling Market is undergoing transformative changes driven by a dynamic interplay of supply and demand factors. Understanding these evolving market dynamics prepares business organizations to make informed investment decisions, refine strategic decisions, and seize new opportunities. By gaining a comprehensive view of these trends, business organizations can mitigate various risks across political, geographic, technical, social, and economic domains while also gaining a clearer understanding of consumer behavior and its impact on manufacturing costs and purchasing trends.

• Market Drivers
  • Increasing urbanization and sales of passenger cars
  • Growing demand for lightweight and high-performance tooling materials in the aerospace & defence
  • Rising use of 3D printing instruments
• Market Restraints
  • High costs and availaibility of low-cost substitutes
• Market Opportunities
  • Innovations and developments in product launches of composite tooling
  • Growth in the development of renewable energy generation projects
• Market Challenges
  • Adverse effects on environment

Porter's Five Forces: A Strategic Tool for Navigating the Composite Tooling Market

Porter's five forces framework is a critical tool for understanding the competitive landscape of the Composite Tooling Market. It offers business organizations with a clear methodology for evaluating their competitive positioning and exploring strategic opportunities. This framework helps businesses assess the power dynamics within the market and determine the profitability of new ventures. With these insights, business organizations can leverage their strengths, address weaknesses, and avoid potential challenges, ensuring a more resilient market positioning.

PESTLE Analysis: Navigating External Influences in the Composite Tooling Market

External macro-environmental factors play a pivotal role in shaping the performance dynamics of the Composite Tooling Market. Political, Economic, Social, Technological, Legal, and Environmental factors analysis provides the necessary information to navigate these influences. By examining PESTLE factors, businesses can better understand potential risks and opportunities. This analysis enables business organizations to anticipate changes in regulations, consumer preferences, and economic trends, ensuring they are prepared to make proactive, forward-thinking decisions.

Market Share Analysis: Understanding the Competitive Landscape in the Composite Tooling Market

A detailed market share analysis in the Composite Tooling Market provides a comprehensive assessment of vendors' performance. Companies can identify their competitive positioning by comparing key metrics, including revenue, customer base, and growth rates. This analysis highlights market concentration, fragmentation, and trends in consolidation, offering vendors the insights required to make strategic decisions that enhance their position in an increasingly competitive landscape.

FPNV Positioning Matrix: Evaluating Vendors' Performance in the Composite Tooling Market

The Forefront, Pathfinder, Niche, Vital (FPNV) Positioning Matrix is a critical tool for evaluating vendors within the Composite Tooling Market. This matrix enables business organizations to make well-informed decisions that align with their goals by assessing vendors based on their business strategy and product satisfaction. The four quadrants provide a clear and precise segmentation of vendors, helping users identify the right partners and solutions that best fit their strategic objectives.

Strategy Analysis & Recommendation: Charting a Path to Success in the Composite Tooling Market

A strategic analysis of the Composite Tooling Market is essential for businesses looking to strengthen their global market presence. By reviewing key resources, capabilities, and performance indicators, business organizations can identify growth opportunities and work toward improvement. This approach helps businesses navigate challenges in the competitive landscape and ensures they are well-positioned to capitalize on newer opportunities and drive long-term success.

Key Company Profiles

The report delves into recent significant developments in the Composite Tooling Market, highlighting leading vendors and their innovative profiles. These include Airtech Advanced Materials Group, Ascent Aerospace, LLC, Formaplex Technologies Ltd., Gurit Services AG, Hexcel Corporation, Huntsman International LLC, Janicki Industries, Inc., Jushi Group Co., Ltd., Machinists Inc., Owens Corning, Preconomy Limited, Royal Tencate N.V., Solvay S.A., Teijin Limited, and Toray Industries, Inc..

Market Segmentation & Coverage

This research report categorizes the Composite Tooling Market to forecast the revenues and analyze trends in each of the following sub-markets:

• Based on Resin Type, market is studied across Benzoxazine, BMI, Epoxy, Polyester, and Vinyl Ester.
• Based on Fiber Type, market is studied across Carbon Fiber and Glass Fiber. The Carbon Fiber is further studied across Chopped Carbon Fiber and Continuous Carbon Fiber.
• Based on Form Type, market is studied across Fabric and Prepreg.
• Based on Application, market is studied across Aerospace, Automotive, Marine, and Wind. The Aerospace is further studied across 3D Printing of Aerospace Tooling. The Automotive is further studied across Exterior and Interior. The Wind is further studied across Wind Blade Hinge System, Wind Blade Master Plug, and Wind Blade Mould.
• Based on Region, market is studied across Americas, Asia-Pacific, and Europe, Middle East & Africa. The Americas is further studied across Argentina, Brazil, Canada, Mexico, and United States. The United States is further studied across California, Florida, Illinois, New York, Ohio, Pennsylvania, and Texas. The Asia-Pacific is further studied across Australia, China, India, Indonesia, Japan, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, and Vietnam. The Europe, Middle East & Africa is further studied across Denmark, Egypt, Finland, France, Germany, Israel, Italy, Netherlands, Nigeria, Norway, Poland, Qatar, Russia, Saudi Arabia, South Africa, Spain, Sweden, Switzerland, Turkey, United Arab Emirates, and United Kingdom.

The report offers a comprehensive analysis of the market, covering key focus areas:

1. Market Penetration: A detailed review of the current market environment, including extensive data from top industry players, evaluating their market reach and overall influence.

2. Market Development: Identifies growth opportunities in emerging markets and assesses expansion potential in established sectors, providing a strategic roadmap for future growth.

3. Market Diversification: Analyzes recent product launches, untapped geographic regions, major industry advancements, and strategic investments reshaping the market.

4. Competitive Assessment & Intelligence: Provides a thorough analysis of the competitive landscape, examining market share, business strategies, product portfolios, certifications, regulatory approvals, patent trends, and technological advancements of key players.

5. Product Development & Innovation: Highlights cutting-edge technologies, R&D activities, and product innovations expected to drive future market growth.

The report also answers critical questions to aid stakeholders in making informed decisions:

1. What is the current market size, and what is the forecasted growth?

2. Which products, segments, and regions offer the best investment opportunities?

3. What are the key technology trends and regulatory influences shaping the market?

4. How do leading vendors rank in terms of market share and competitive positioning?

5. What revenue sources and strategic opportunities drive vendors' market entry or exit strategies?

Table of Contents

1. Preface

• 1.1. Objectives of the Study
• 1.2. Market Segmentation & Coverage
• 1.3. Years Considered for the Study
• 1.4. Currency & Pricing
• 1.5. Language
• 1.6. Stakeholders

2. Research Methodology

• 2.1. Define: Research Objective
• 2.2. Determine: Research Design
• 2.3. Prepare: Research Instrument
• 2.4. Collect: Data Source
• 2.5. Analyze: Data Interpretation
• 2.6. Formulate: Data Verification
• 2.7. Publish: Research Report
• 2.8. Repeat: Report Update

3. Executive Summary

4. Market Overview

5. Market Insights

• 5.1. Market Dynamics
  • 5.1.1. Drivers
    • 5.1.1.1. Increasing urbanization and sales of passenger cars
    • 5.1.1.2. Growing demand for lightweight and high-performance tooling materials in the aerospace & defence
    • 5.1.1.3. Rising use of 3D printing instruments
  • 5.1.2. Restraints
    • 5.1.2.1. High costs and availaibility of low-cost substitutes
  • 5.1.3. Opportunities
    • 5.1.3.1. Innovations and developments in product launches of composite tooling
    • 5.1.3.2. Growth in the development of renewable energy generation projects
  • 5.1.4. Challenges
    • 5.1.4.1. Adverse effects on environment
• 5.2. Market Segmentation Analysis
• 5.3. Porter's Five Forces Analysis
  • 5.3.1. Threat of New Entrants
  • 5.3.2. Threat of Substitutes
  • 5.3.3. Bargaining Power of Customers
  • 5.3.4. Bargaining Power of Suppliers
  • 5.3.5. Industry Rivalry
• 5.4. PESTLE Analysis
  • 5.4.1. Political
  • 5.4.2. Economic
  • 5.4.3. Social
  • 5.4.4. Technological
  • 5.4.5. Legal
  • 5.4.6. Environmental

6. Composite Tooling Market, by Resin Type

• 6.1. Introduction
• 6.2. Benzoxazine
• 6.3. BMI
• 6.4. Epoxy
• 6.5. Polyester
• 6.6. Vinyl Ester

7. Composite Tooling Market, by Fiber Type

• 7.1. Introduction
• 7.2. Carbon Fiber
  • 7.2.1. Chopped Carbon Fiber
  • 7.2.2. Continuous Carbon Fiber
• 7.3. Glass Fiber

8. Composite Tooling Market, by Form Type

• 8.1. Introduction
• 8.2. Fabric
• 8.3. Prepreg

9. Composite Tooling Market, by Application

• 9.1. Introduction
• 9.2. Aerospace
  • 9.2.1. 3D Printing of Aerospace Tooling
• 9.3. Automotive
  • 9.3.1. Exterior
  • 9.3.2. Interior
• 9.4. Marine
• 9.5. Wind
  • 9.5.1. Wind Blade Hinge System
  • 9.5.2. Wind Blade Master Plug
  • 9.5.3. Wind Blade Mould

10. Americas Composite Tooling Market

• 10.1. Introduction
• 10.2. Argentina
• 10.3. Brazil
• 10.4. Canada
• 10.5. Mexico
• 10.6. United States

11. Asia-Pacific Composite Tooling Market

• 11.1. Introduction
• 11.2. Australia
• 11.3. China
• 11.4. India
• 11.5. Indonesia
• 11.6. Japan
• 11.7. Malaysia
• 11.8. Philippines
• 11.9. Singapore
• 11.10. South Korea
• 11.11. Taiwan
• 11.12. Thailand
• 11.13. Vietnam

12. Europe, Middle East & Africa Composite Tooling Market

• 12.1. Introduction
• 12.2. Denmark
• 12.3. Egypt
• 12.4. Finland
• 12.5. France
• 12.6. Germany
• 12.7. Israel
• 12.8. Italy
• 12.9. Netherlands
• 12.10. Nigeria
• 12.11. Norway
• 12.12. Poland
• 12.13. Qatar
• 12.14. Russia
• 12.15. Saudi Arabia
• 12.16. South Africa
• 12.17. Spain
• 12.18. Sweden
• 12.19. Switzerland
• 12.20. Turkey
• 12.21. United Arab Emirates
• 12.22. United Kingdom

13. Competitive Landscape

• 13.1. Market Share Analysis, 2023
• 13.2. FPNV Positioning Matrix, 2023
• 13.3. Competitive Scenario Analysis
• 13.4. Strategy Analysis & Recommendation

Companies Mentioned

• 1. Airtech Advanced Materials Group
• 2. Ascent Aerospace, LLC
• 3. Formaplex Technologies Ltd.
• 4. Gurit Services AG
• 5. Hexcel Corporation
• 6. Huntsman International LLC
• 7. Janicki Industries, Inc.
• 8. Jushi Group Co., Ltd.
• 9. Machinists Inc.
• 10. Owens Corning
• 11. Preconomy Limited
• 12. Royal Tencate N.V.
• 13. Solvay S.A.
• 14. Teijin Limited
• 15. Toray Industries, Inc.