다층 공압출 진공 배깅 필름 시장 보고서 : 동향, 예측 및 경쟁 분석(-2035년)

Multilayer Co-Extrusion Vacuum Bagging Film Market

The future of the global multilayer co-extrusion vacuum bagging film market looks promising with opportunities in the aerospace, wind energy, automotive, and marine markets. The global multilayer co-extrusion vacuum bagging film market is expected to reach an estimated $1,100 million by 2035 from $618 million in 2027 with a CAGR of 7.0% from 2027 to 2035. The major drivers for this market are the increasing emphasis on durability & temperature resistance and the rising investment in renewable energy sector.

• Lucintel forecasts that, within the type category, above 200°C is expected to witness higher growth over the forecast period due to increase in demand for materials that can tolerate even higher temperatures.
• Within the application category, aerospace is expected to witness the highest growth over the forecast period due to increasing production and growth in demand for high-temperature materials in the aerospace sector.
• In terms of regions, North America is expected to witness the highest growth over the forecast period due to growth and advanced technologies investments in aerospace manufacturing across different countries.

Emerging Trends in Multilayer Co-Extrusion Vacuum Bagging Film Market

From 2025 to 2027, multi layer co-extrusion vacuum bagging film will evolve from commodity consumable to an engineered process material. Current clients (aerospace, wind-energy, automotive, marine) are demanding thinner films, more consistent elongation, and better leak rate control with improved disposal. Lucintel's market assessment agrees with Supplier's investment in barrier structures and application specific grades.

• Sustainability: 2025-2027 will see a reduction in material footprint through the introduction of bio-based polymers, recycled content, and down gauging initiatives. A 15% reduction of film weight can reduce waste without the need for a change in bagging process. New reportable clinical carbon measurements and specifications will drive purchasing.
• Digital Manufacturing: Automated lay up and digitally controlled vacuum systems will require increasing consistency in forming films and permeability; 2025 aerospace programs will integrate more advanced process control with sensor integration. By 2025, film data sheets will include performance parameters that are readable by manufacturing equipment.
• Lightweight Materials: 2025 programs in the aerospace, electric vehicle, and wind turbine industries will further decrease material weight by using thin films that allow stretch around complex forms without early failure. This will favor the development of multilayer structures with high elongation and low gauge.
• Regional Supply Chain Diversification: 2025 purchasing will ensure at least two film sources as single sourcing risk was evident during the previous industry disruptions. Regional qualification will support shorter lead times and more resilient production through 2030.
• Functional Products: Current market trends are headed toward multi-faceted films that incorporate release control, tear resistance, temperature resistance, and low volatile transfer. Suppliers developed high temperature grades for autoclave and OoP for the 2025-2027 time frame. Functional differentiation will provide a margin benefit and a decrease in failure rates, especially in certified aerospace markets.

While the demand and specifications for vacuum bag films will remain tied to the growth of composite manufacturing, the environment is becoming more fast changing. Suppliers who can refine their processes to minimize waste, and are able to improve qualification rates, should gain a competitive advantage. Price is the dominant factor for both wind and automotive products. Aerospace will continue to be a high margin market; however, a combination of regional sourcing and digital documentation is expected to disrupt the supplier market during the next 5 years.

Recent Developments in the Multilayer Co-Extrusion Vacuum Bagging Film Market

Multilayer co-extrusion vacuum bagging films are beginning to be used in aerospace, wind-energy, and hydrogen production through more advanced automation. Activities from 2025 to 2027 are anticipated to be mainly investment driven, while suppliers refine barrier properties and increase the films' recyclability levels. Lucintel's perspective on the market indicates a broader trend towards lightweight, high-temperature processing materials and shortened qualification periods.

• Technological introductions - In 2025, Airtech introduced a high-temperature multilayer bagging film rated at approximately 400°F which customers predicted would shorten autoclave processing time (March 2015). In the next three to five years, higher temperature capabilities will begin to be adopted in aerospace and hydrogen tanks.
• Capacity Expansions: In 2025, European film converters added capacity by around 20% to meet composite demand (June 2025). Extra capacity should reduce risk associated with long lead times and support regional sourcing as wind-blade and aircraft systems increase in capacity.
• Alliances: In 2025, a film supplier and an automated tape placement integrator entered into a partnership to provide vacuum integrity data and robotically controlled tape placement (September 2025). Vacuum integrity data along with automated tape placement will ease the burden of providing qualification data needed for high volume production of composite parts and will minimize scrap.
• Recycling: In 2025, suppliers began offering films containing at least 30% recycled material for commercial use (October 2025). This trend will increase pressure on suppliers to offer lower price films until aerospace and wind production facilities begin to focus on lowering material waste.
• Large Supply Agreements: Composite manufacturers contracted for the supply of over 1 million square meters of film per year in 2025 (November 2025). Dependable multilayer supply, local inventories, and verified performance will maximize supply agreements over the lowest cost supplier.

Over the period of 2025 to 2027 there are more knowns than unknowns in the market. It is clear that performance specifications will increase while processors will benefit from more efficient designs and reduced waste. There will be an increase in supplier investments for differentiated film structures, as opposed to commodity thickness. After thorough qualification, especially in the aerospace industry, the greatest margins to be earned over the next 5 years will be cash sales to customers that balance barrier control, process data, and feasible recycling.

Strategic Growth Opportunities in the Multilayer Co-Extrusion Vacuum Bagging Film Market

The multilayer co-extrusion vacuum bagging film market is entering a new growth phase due to changes in aerospace and automotive backlogs, composite wind turbine blades, and the push to decrease waste in processing. Lucintel expects increased demand for films between 2024-2026 that improve consolidation and process stability, while enhancing resistance to higher temperatures.

• Suppliers of aerospace composite films can focus on high-end, customized films for the manufacturing of structures and tools used in the out-of-autoclave repair of aircraft. Sustained demand for composite manufacturing is expected through the 2025-2026 time period due to the predicted delivery of 793 commercial aircraft by Airbus. Suppliers of qualification-focused films for advanced process control can expect sustained business growth over the next 3 to 5 years due to the increasing demand for aircraft.
• Vacuum bagging systems required for the manufacturing of carbon fiber body panels and battery enclosures, along with other structural components of electric vehicles, have created a demand for a film that can reinforce and adapt to the repair of the carbon fiber body panels. Global retail sales of electric vehicles reached 17 million units in 2024 (January 2025). Manufacturers are shifting the composite process from specialty vendors to factory-based processes.
• Wind Energy Repair Films: Regional service companies provide a target customer base for puncture resistant, conformable films for blade repair and on-site strengthening. The Global Wind Energy Council reported 117 gigawatts of new capacity in 2023 (April 2025). Over the next 3 to 5 years, the demand for films and strengthening solutions will continue to grow due to the aging of existing wind energy technologies and the beginning of offshore wind energy maintenance.
• Recyclable Film Systems: Producers can opt for mono-material or lower-gauge systems. There is no need to lose market competitiveness while simultaneously optimizing packaging disposal costs. The European Union Packaging and Packaging Waste Regulation will become effective in February 2025. Because of this, composite processors will have to achieve documented efficiency with materials. There will be increased demand for films that have measurable waste and emission benefits. This will create an opportunity for processors to charge a premium.
• Digital Process Services: Of particular interest to film manufacturers, engineered films are available with sensors and use traceability software and aerospace and industrial composite plant usage analytics. Siemens had 1.5 million industrial software customers in May 2025. Process assurance is expected to become significantly more important for laminate processes and reduction of risk.

In the short term, demand will not be equal in all areas. Aerospace grade films will be the highest margin films, followed by automotive and wind energy. Reliably servicing a market with a low competitive advantage will foster supply reliability with reduced lead times and a focus on disposal. Margin protection will be achieved by the combination of services of film engineering and application support. Preferred-supplier status will be impacted by regional, documented performance, and recyclable design.

Multilayer Co-Extrusion Vacuum Bagging Film Market Drivers and Challenges

The multilayer co-extrusion vacuum bagging film market is characterized by the co-existence of a number of drivers including demand for customer specifications, economic trends, sustainability and regulatory pressures, advances in aerospace technology, trends in the wind energy sector, and the proliferation of composite manufacturing. Lucintel points out that each of these factors will impact purchasing decisions based on performance and cost with an emphasis on ease of processing. Suppliers are expected to deal with the increasing variety of demanding specifications imposed by composite manufacturing with an emphasis on barrier properties, reliability of supply, and compliance.

The driving forces of the multilayer co-extrusion vacuum bagging film market are:

• Increased Customer Demand: Increased manufacturing of aerospace structures, wind energy, electric vehicles, and high-performance sports equipment have increased the demand for reliable vacuum bagging films. Manufacturers need films that provide consistent vacuum retention, elongation, and resistance to tearing and maintain a clean release during composite curing. The manufacturing of wind blades continues to grow and reached approximately 117 gigawatts in 2023 (March 2025). In the next three to five years, expanding composite applications will drive converters to develop application specific multilayer films with improved consistency and durability.
• Improved Technology: Co-extrusion technology allows manufacturers to engineer a film that combines a barrier, sealant, release, and reinforcement. This technology allows for vacuum integrity and reduces leakage, and supports more demanding processes in an autoclave or out of an autoclave. Furthermore, the use of automated production and improved resin systems has reduced the occurrence of defects and waste of material. In January 2025, several aerospace manufacturers stated that there was an increase in the use of out of autoclave composite processing for larger parts. In the next three to five years, these technological advances will allow the use of more high performance and lightweight composite materials, faster processing, and more complex geometries.
• Sustainability: Market forces are encouraging film producers to reduce film thickness, increase the use of recycled materials, and create formulations of polymers that can either be easily recycled or have lower environmental impacts. Vacuum consumables that maintain temperature control and airtight seals, while generating less waste, are also being designed. Resources to create this more efficient technology will become necessary due to the Packaging and Packaging Waste Regulation of the European Union, which goes into effect in February 2025. Demand for more efficient methods and technologies for polymer solutions will develop in the next three to five years due to increasing customer expectations to reduce environmental impacts. Suppliers that develop technologies with the ability to drastically reduce waste, emissions, and environmental impacts, will receive greater customer satisfaction.
• Manufacturing Efficiency: The use of multilayer films in conjunction with composite manufacturing would help to simplify the process through the integration of multiple functional layers and reduce film failure risks. Films that offer improved dimensional stability and better control of permeability can help reduce scrap and improve labor productivity while helping to maintain consistent cure cycles. The International Federation of Robotics (IFR) reports that approximately 500,000 industrial robots used in aerospace manufacturing were deployed in 2023. An emphasis to enhance manufacturing efficiency coupled with the opening of new assembly lines over the next three to five years will help drive demand for films engineered for automated manufacturing, rapid layup, and high volume.

Cost Advantages: Although the unit cost of multilayer films is higher than basic single-layer variants, lower leakage-related failures, faster setup times, and improved part quality result in overall cost savings through the reduced consumption of materials and reduced waste. Improved resin compatibility and higher tear resistance combine to lower interruptions and rework. In April 2025, airlines continued to face high aviation fuel costs, making aerospace manufacturers concentrate on lightweight composites and improvements in production. It is expected the advantages related to total cost of ownership will drive demand in the aerospace, automotive, and wind component sectors in the next 3 to 5 years.

These issues affect this Market:

Volatility of Raw Materials Prices: This market depends on polyethylene, nylon, EVA, and specialty adhesive materials. Prices of all these materials are influenced by crude oil prices, energy prices, logistics and by how much capacity is available in different regions. These factors can happen suddenly. In January 2025, uncertainty remained in the polymer supply chain because prices of crude oil were approximately at $80 per barrel. In the next 3 to 5 years, these price fluctuations will affect supply chain agreements and will likely lead to sourcing being done in a variety of regions, improvements in formulas, and the signing of contracts of longer duration.

• Recycling and Waste Management: Post-production waste from vacuum bagging films becomes quite contaminated, making mechanical recycling very difficult. Composite manufacturers also produce a lot of single-use consumables that create waste and environmental issues. The European Commission announced that they would amend more regulations to focus on closing the loop on plastics and bettering plastic circularity in March 2025. In the next 3 to 5 years, suppliers will face stricter waste regulations and be forced to design products with a recycling take-back infrastructure. In return, customers will see a rise in compliance costs and a lack of performing recycling infrastructure.
• Performance and Compliance Requirements: Films must endure elevated temperatures, vacuum, chemical exposure, stretching, and long curing times without tearing or losing seal integrity. Aerospace and defense films and bagging materials must also withstand very strict qualification, traceability, and lot control, while maintaining constant production batch uniformity. Supply chain constraints and certification issues continued to disrupt global aerospace deliveries in June 2025. The next 3 to 5 years could also bring increased complexity to the design of aerospace components and a multi-year increase in quality expectations. This could also result in a large increase in qualification costs and design dominance for large, established firms due to their superior testing capabilities and technical support.

As the adoption of composites in the aerospace, automotive, wind energy, and industrial sectors increases, the multilayer coextrusion vacuum bagging film market is expected to grow exponentially. Increased technology will allow for better sustainability and manufacturing processes and improve the lifecycle savings of these products. Raw material volatility, slow progress on recycling, and difficult product qualification standards will impact margins and create slower adoption of products. The competitive advantage will be created by improved design of film, reliable application engineering, and established environmental performance. In the coming years, value will shift from purchasing low cost products to a total value purchase that includes reliable supply and processed performance.

List of Multilayer Co-Extrusion Vacuum Bagging Film Market Companies

Companies in the market compete on the basis of product quality offered. Major players in this market focus on expanding their manufacturing facilities, R&D investments, infrastructural development, and leverage integration opportunities across the value chain. Through these strategies multilayer co-extrusion vacuum bagging film market companies cater increasing demand, ensure competitive effectiveness, develop innovative products & technologies, reduce production costs, and expand their customer base. Some of the multilayer co-extrusion vacuum bagging film market companies profiled in this report include-

• Airtech International
• Aerovac
• Flextech
• Vac Innovation
• PRO-VAC
• Diatex
• Bodotex
• K. R. Composites
• Castro Composites
• Shanghai Leadgo-Tech

Multilayer Co-Extrusion Vacuum Bagging Film Market by Segment

The study includes a forecast for the global multilayer co-extrusion vacuum bagging film market by type, application, and region.

Multilayer Co-Extrusion Vacuum Bagging Film Market by Type [Value ($M) from 2019 to 2035]:

• 120°C-200°C
• Above 200°C
• Others

Multilayer Co-Extrusion Vacuum Bagging Film Market by Application [Value ($M) from 2019 to 2035]:

• Aerospace
• Wind Energy
• Automotive
• Marine
• Others

Multilayer Co-Extrusion Vacuum Bagging Film Market by Region [Value ($M) from 2019 to 2035]:

• North America
• Europe
• Asia Pacific
• The Rest of the World

Country Wise Outlook for the Multilayer Co-Extrusion Vacuum Bagging Film Market

The aerospace, wind-energy, and automotive-composites sectors are encouraging the market growth of multilayer co-extrusion vacuum bagging film. Most manufacturers focus on film supply with a higher temperature rating and with puncture resistance. Lucintel predicts that, in the next few years, capacity additions will be more focused on localization, qualification, and low-emission production.

• United States: The Inflation Reduction Act continues to incentivize U.S. clean-energy manufacturing. Hexcel also indicated investments of approximately $200 million over the next five years on capacity and technology for composite materials (March 2025). Vacuum-bagging films qualified for aerospace, wind-energy, and automotive composites production will likely be in demand in the next few years.
• China: The Ministry of Industry and Information Technology has continued its advanced nonwoven and composite materials action plan. Sinoma Science & Technology has reported revenue of RMB 27.6 billion in 2024 and continues its investment on high-performance composite-materials (April 2025). Public sector backing and large-scale materials manufacturing support film qualification, and, in the long term, processing consumables.
• Germany: Airbus has started preparation to build its A321XLR at the Hamburg site. Airbus also indicated its commitment to the composite-intense production of aircraft in Germany (July 2025). Continuous airport production will ensure the demand for certified vacuum-bagging systems, which include multilayer co-extruded films, of German suppliers.
• India: The production-linked incentive scheme and the National Green Hydrogen Mission in India facilitate domestic investment in batteries, battery technology, and clean-energy equipment. In January 2023, the Indian government provided the first tranche of ₹19,744 crore for the hydrogen mission of India. These initiatives will provide impetus to the advanced high-temperature process films manufacturing and promote a high value-added manufacturing of composite parts.
• Japan: Toray has a 100 billion yen commitment in its medium-term strategy for May 2023 to enhance its investments in carbon-fiber composite businesses. Increased activity of composite materials will create demand for precision consumables. This will also incentivize the development of augmented multilayer vacuum-bagging films.

Features of the Global Multilayer Co-Extrusion Vacuum Bagging Film Market

• Market Size Estimates: multilayer co-extrusion vacuum bagging film market size estimation in terms of value ($B).
• Trend and Forecast Analysis: Market trends (2019 to 2026) and forecast (2027 to 2035) by various segments and regions.
• Segmentation Analysis: multilayer co-extrusion vacuum bagging film market size by type, application, and region in terms of value ($B).
• Regional Analysis: multilayer co-extrusion vacuum bagging film market breakdown by North America, Europe, Asia Pacific, and Rest of the World.
• Growth Opportunities: Analysis of growth opportunities in different type, application, and regions for the multilayer co-extrusion vacuum bagging film market.
• Strategic Analysis: This includes M&A, new product development, and competitive landscape of the multilayer co-extrusion vacuum bagging film market.

Analysis of competitive intensity of the industry based on Porter's Five Forces model.

If you are looking to expand your business in this or adjacent markets, then contact us. We have done hundreds of strategic consulting projects in market entry, opportunity screening, due diligence, supply chain analysis, M & A, and more.

This report answers following 11 key questions:

• Q.1. What are some of the most promising, high-growth opportunities for the multilayer co-extrusion vacuum bagging film market by type (120°C-200°C, above 200°C, and others), application (aerospace, wind energy, automotive, marine, and others), and region (North America, Europe, Asia Pacific, and the Rest of the World)?
• Q.2. Which segments will grow at a faster pace and why?
• Q.3. Which region will grow at a faster pace and why?
• Q.4. What are the key factors affecting market dynamics? What are the key challenges and business risks in this market?
• Q.5. What are the business risks and competitive threats in this market?
• Q.6. What are the emerging trends in this market and the reasons behind them?
• Q.7. What are some of the changing demands of customers in the market?
• Q.8. What are the new developments in the market? Which companies are leading these developments?
• Q.9. Who are the major players in this market? What strategic initiatives are key players pursuing for business growth?
• Q.10. What are some of the competing products in this market and how big of a threat do they pose for loss of market share by material or product substitution?
• Q.11. What M&A activity has occurred in the last 6 years and what has its impact been on the industry?

Table of Contents

1. Executive Summary

2. Market Overview

• 2.1 Background and Classifications
• 2.2 Supply Chain

3. Market Trends & Forecast Analysis

• 3.2 Industry Drivers and Challenges
• 3.3 PESTLE Analysis
• 3.4 Patent Analysis
• 3.5 Regulatory Environment

4. Global Multilayer Co-Extrusion Vacuum Bagging Film Market by Type

• 4.1 Overview
• 4.2 Attractiveness Analysis by Type
• 4.3 120°C-200°C: Trends and Forecast (2019-2035)
• 4.4 Above 200°C: Trends and Forecast (2019-2035)
• 4.5 Others: Trends and Forecast (2019-2035)

5. Global Multilayer Co-Extrusion Vacuum Bagging Film Market by Application

• 5.1 Overview
• 5.2 Attractiveness Analysis by Application
• 5.3 Aerospace: Trends and Forecast (2019-2035)
• 5.4 Wind Energy: Trends and Forecast (2019-2035)
• 5.5 Automotive: Trends and Forecast (2019-2035)
• 5.6 Marine: Trends and Forecast (2019-2035)
• 5.7 Others: Trends and Forecast (2019-2035)

6. Regional Analysis

• 6.1 Overview
• 6.2 Global Multilayer Co-Extrusion Vacuum Bagging Film Market by Region

7. North American Multilayer Co-Extrusion Vacuum Bagging Film Market

• 7.1 Overview
• 7.2 North American Multilayer Co-Extrusion Vacuum Bagging Film Market by Type
• 7.3 North American Multilayer Co-Extrusion Vacuum Bagging Film Market by Application
• 7.4 United States Multilayer Co-Extrusion Vacuum Bagging Film Market
• 7.5 Mexican Multilayer Co-Extrusion Vacuum Bagging Film Market
• 7.6 Canadian Multilayer Co-Extrusion Vacuum Bagging Film Market

8. European Multilayer Co-Extrusion Vacuum Bagging Film Market

• 8.1 Overview
• 8.2 European Multilayer Co-Extrusion Vacuum Bagging Film Market by Type
• 8.3 European Multilayer Co-Extrusion Vacuum Bagging Film Market by Application
• 8.4 German Multilayer Co-Extrusion Vacuum Bagging Film Market
• 8.5 French Multilayer Co-Extrusion Vacuum Bagging Film Market
• 8.6 Spanish Multilayer Co-Extrusion Vacuum Bagging Film Market
• 8.7 Italian Multilayer Co-Extrusion Vacuum Bagging Film Market
• 8.8 United Kingdom Multilayer Co-Extrusion Vacuum Bagging Film Market

9. APAC Multilayer Co-Extrusion Vacuum Bagging Film Market

• 9.1 Overview
• 9.2 APAC Multilayer Co-Extrusion Vacuum Bagging Film Market by Type
• 9.3 APAC Multilayer Co-Extrusion Vacuum Bagging Film Market by Application
• 9.4 Japanese Multilayer Co-Extrusion Vacuum Bagging Film Market
• 9.5 Indian Multilayer Co-Extrusion Vacuum Bagging Film Market
• 9.6 Chinese Multilayer Co-Extrusion Vacuum Bagging Film Market
• 9.7 South Korean Multilayer Co-Extrusion Vacuum Bagging Film Market
• 9.8 Indonesian Multilayer Co-Extrusion Vacuum Bagging Film Market

10. ROW Multilayer Co-Extrusion Vacuum Bagging Film Market

• 10.1 Overview
• 10.2 ROW Multilayer Co-Extrusion Vacuum Bagging Film Market by Type
• 10.3 ROW Multilayer Co-Extrusion Vacuum Bagging Film Market by Application
• 10.4 Middle Eastern Multilayer Co-Extrusion Vacuum Bagging Film Market
• 10.5 South American Multilayer Co-Extrusion Vacuum Bagging Film Market
• 10.6 African Multilayer Co-Extrusion Vacuum Bagging Film Market

11. Competitor Analysis

• 11.1 Product Portfolio Analysis
• 11.2 Operational Integration
• 11.3 Porter's Five Forces Analysis
  • Competitive Rivalry
  • Bargaining Power of Buyers
  • Bargaining Power of Suppliers
  • Threat of Substitutes
  • Threat of New Entrants
• 11.4 Market Share Analysis

12. Opportunities & Strategic Analysis

• 12.1 Value Chain Analysis
• 12.2 Growth Opportunity Analysis
  • 12.2.1 Growth Opportunities by Type
  • 12.2.2 Growth Opportunities by Application
• 12.3 Emerging Trends in the Global Multilayer Co-Extrusion Vacuum Bagging Film Market
• 12.4 Strategic Analysis
  • 12.4.1 New Product Development
  • 12.4.2 Certification and Licensing
  • 12.4.3 Mergers, Acquisitions, Agreements, Collaborations, and Joint Ventures

13. Company Profiles of the Leading Players Across the Value Chain

• 13.1 Competitive Analysis
• 13.2 Airtech International
  • Company Overview
  • Multilayer Co-Extrusion Vacuum Bagging Film Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.3 Aerovac
  • Company Overview
  • Multilayer Co-Extrusion Vacuum Bagging Film Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.4 Flextech
  • Company Overview
  • Multilayer Co-Extrusion Vacuum Bagging Film Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.5 Vac Innovation
  • Company Overview
  • Multilayer Co-Extrusion Vacuum Bagging Film Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.6 PRO-VAC
  • Company Overview
  • Multilayer Co-Extrusion Vacuum Bagging Film Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.7 Diatex
  • Company Overview
  • Multilayer Co-Extrusion Vacuum Bagging Film Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.8 Bodotex
  • Company Overview
  • Multilayer Co-Extrusion Vacuum Bagging Film Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.9 K. R. Composites
  • Company Overview
  • Multilayer Co-Extrusion Vacuum Bagging Film Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.10 Castro Composites
  • Company Overview
  • Multilayer Co-Extrusion Vacuum Bagging Film Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing
• 13.11 Shanghai Leadgo-Tech
  • Company Overview
  • Multilayer Co-Extrusion Vacuum Bagging Film Business Overview
  • New Product Development
  • Merger, Acquisition, and Collaboration
  • Certification and Licensing

14. Appendix

• 14.1 List of Figures
• 14.2 List of Tables
• 14.3 Research Methodology
• 14.4 Disclaimer
• 14.5 Copyright
• 14.6 Abbreviations and Technical Units
• 14.7 About Us
• 14.8 Contact Us