표면 에너지 개질제 : 시장 점유율 분석, 업계 동향 및 통계, 성장 예측(2026-2031년)

According to Mordor Intelligence, the surface energy modifier market was valued at USD 2.65 billion in 2025 and is estimated to grow from USD 2.82 billion in 2026 to reach USD 3.85 billion by 2031, at a CAGR of 6.43% during the forecast period (2026-2031).

This report is Segmented by Modifier Type (Silicone-Based Modifiers, Fluoropolymer-Based Modifiers, and More), Substrate (Plastics and Polymers, Metals, Glass, and More), Application (Coatings, Printing Inks, Adhesives and Sealants, and More), and Geography (Asia-Pacific, North America, Europe, South America, and Middle-East and Africa). The Market Forecasts are Provided in Terms of Value (USD).

Global Surface Energy Modifier Market Trends and Insights

Rising Adoption of Waterborne and Low-VOC Formulations

Regulations under the European Union Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) framework, the U.S. Environmental Protection Agency (EPA) Toxic Substances Control Act (TSCA), and China's Ministry of Ecology and Environment standards have shifted coatings and inks away from solvent-borne chemistry. The surface energy modifier market benefits because waterborne and radiation-curable formulations need additives that improve substrate wetting and film formation. Water has a surface tension of 72 millinewtons per meter, compared with 20-30 millinewtons per meter for typical organic solvents, which makes spontaneous substrate wetting more difficult. Evonik introduced TEGO Wet 288 in April 2025 to address the reduced effectiveness of conventional siloxane additives in high-pH waterborne inkjet inks and during extended storage. Waterborne systems accounted for 90% of architectural coating formulations in mature North American and European markets, while lower penetration across the Asia-Pacific left room for additional adoption. Formulators in the surface energy modifier market also need more stable surface-control additives when moving to low-VOC systems because water-based formulations have higher surface energy.

Demand for High-Performance Coating, Ink, and Adhesive Additives

Automotive original equipment manufacturers, electronics producers, and food packaging converters have tightened performance specifications for coatings and adhesives. The surface energy modifier market serves these requirements through products that support scratch resistance, ultraviolet durability, wetting uniformity, and adhesion. Automotive body panels often combine steel, aluminum, and thermoplastic polyolefin parts, which have different surface energy profiles and cannot always use a single conventional additive. Evonik launched TEGO Addbond LTK and TEGO Addbond LTK-B in 2025 as polyester-based adhesion promoters for steel substrates, which accounted for 65% of pre-coated metal products. Printed circuit board conformal coatings and advanced semiconductor packages also require uniform nanoscale films on low-energy laminates without delamination. Lightweight electric vehicle construction adds demand for adhesive systems that bond carbon-fiber-reinforced polymer, aluminum, and steel under thermal cycling.

Formulation Compatibility and Intercoat Adhesion Challenges

Surface energy modifiers migrate to interfaces, which helps them manage wetting and surface tension but can disrupt multilayer coating systems when the additive is mismatched or overdosed. Silicone-based modifiers can lower film-surface energy enough to prevent a subsequent coat from wetting properly. This can cause intercoat adhesion failures and create rework or scrap in automotive and industrial finishing lines. The challenge becomes stronger during waterborne conversions in the surface energy modifier market because pH, ionic strength, and co-solvent levels differ from those in solvent-borne reference formulations. Qualification testing for electrocoat primer, waterborne basecoat, and clearcoat systems can exceed 6 months, which slows reformulation. Reactive silicone grades can bond into the polymer network during curing and limit later migration, but their price premium and requalification needs restrict use among cost-sensitive customers.

Other drivers and restraints analyzed in the detailed report include:

1. Growth of Packaging, Automotive, Electronics, and Construction Applications
2. PFAS-Free Reformulation and Fluorine-Free Surface-Control Technologies
3. Raw Material Price Volatility

For complete list of drivers and restraints, kindly check the Table Of Contents.

Segment Analysis

By modifier type, silicone-based modifiers held 38.56% of the surface energy modifier market share in 2025. Polydimethylsiloxane and polyether-modified siloxane chemistries work in waterborne, solvent-borne, ultraviolet-curable, and radiation-curable systems. They reduce surface tension, control foam, and improve substrate wetting and leveling across different formulations. Conventional silicone migration can cause problems in multilayer coatings, but reactive grades with acrylate, hydroxyl, or epoxide groups can crosslink into the cured film, as shown by BYK's UV 3590 and UV 3595 products for ultraviolet printing inks and overprint varnishes. This technical range helps silicone grades remain relevant as fluorine-free alternatives gain attention.

Fluoropolymer-based modifiers are projected to advance at a 7.21% CAGR through 2031. Their growth reflects residual demand in semiconductor manufacturing, high-barrier food packaging, and specialty industrial coatings, where alternatives do not yet meet every performance requirement. This demand exists alongside restrictions on low-molecular-weight fluorosurfactants, which have a different regulatory position from certain high-molecular-weight fluoropolymers. Acrylic-based modifiers provide a growing alternative as fluorine substitution progresses, while polyolefin-based and wax-based products serve plastic compounding, mold release, and recycled-substrate applications. BASF introduced three Efka FL leveling agents in July 2025 using silicone-modified polyacrylate chemistry to improve flow and wetting without introducing slip.

Complete Report Scope:

• By Modifier Type
  • Silicone-Based Modifiers
  • Fluoropolymer-Based Modifiers
  • Acrylic-Based Modifiers
  • Other Modifier Types (Polyolefin-Based, Wax-Based, Other Surface Energy Modifiers)
• By Substrate
  • Plastics and Polymers
  • Metals
  • Glass
  • Composites
  • Other Substrates (Paper and Paperboard, Textiles, Other Substrates)
• By Application
  • Coatings
  • Printing Inks
  • Adhesives and Sealants
  • Other Applications (Plastic Compounding, Films and Packaging, Mold Release, Other Applications)
• By Geography
  • Asia-Pacific
    • China
    • India
    • Japan
    • South Korea
    • Rest of Asia-Pacific
  • North America
    • United States
    • Canada
    • Mexico
  • Europe
    • Germany
    • United Kingdom
    • France
    • Italy
    • Rest of Europe
  • South America
    • Brazil
    • Argentina
    • Rest of South America
  • Middle-East and Africa
    • Saudi Arabia
    • South Africa
    • Rest of Middle-East and Africa

Geography Analysis

Asia-Pacific held 40.21% of the surface energy modifier market in 2025 and is projected to advance at a 7.63% CAGR through 2031. China drives regional demand through electronics assembly, flexible packaging conversion, and automotive paint activity in the Yangtze River Delta and Pearl River Delta. The Ministry of Ecology and Environment's volatile organic compound standards have supported a shift from solvent-based products toward water-compatible silicone polyethers. Japan and South Korea remain high-specification demand centers for printed circuit board protection and ultraviolet-curing systems, while Japanese automotive original equipment manufacturers require scratch-resistant and hydrophobic clearcoat films. India is the fastest-growing national market in the region, supported by packaging production and automotive manufacturing. Nouryon expanded Levasil colloidal silica capacity in Guangzhou in 2026 after opening its Shanghai innovation center in November 2025, showing how suppliers are increasing manufacturing and technical service coverage in Asia-Pacific.

In North America, environmental requirements influence the quality and composition of demand. U.S. actions on fluorinated substances and state restrictions have increased co-development work, while automotive original equipment manufacturers have standardized high-performance wetting agents in electrodeposition primer lines. Europe follows a stricter regulatory path, with the European Chemicals Agency reviewing the European Union's per- and polyfluoroalkyl substance restriction proposal. Germany, the United Kingdom, France, and Italy account for much of European coatings additive demand, with Germany's automotive and industrial machinery base setting important specifications.

South America is led by Brazil's automotive assembly, flexible packaging, and architectural coatings demand. Brenntag's 2025 distribution agreement with Nouryon expanded access to waterborne paint and ink additives in Brazil, while Argentina and the Rest of South America remain more price-sensitive and face supply-chain limitations. The Middle-East and Africa markets are linked to construction and industrial diversification, with Saudi Arabia's Vision 2030 investments supporting industrial and protective coatings. South Africa adds demand from automotive assembly and flexible packaging, but the region has less technology-led formulation demand than the Asia-Pacific.

1. ALTANA
2. Arkema
3. BASF
4. CLARIANT
5. Croda International Plc
6. Dow
7. Eastman Chemical Company
8. Elementis PLC
9. Evonik Industries AG
10. Huntsman Corporation
11. Lubrizol
12. Michelman, Inc.
13. Momentive
14. Munzing Corporation
15. Nouryon

Additional Benefits:

• The market estimate (ME) sheet in Excel format
• 3 months of analyst support

TABLE OF CONTENTS

1 Introduction

• 1.1 Study Assumptions and Market Definition
• 1.2 Scope of the Study

2 Research Methodology

3 Executive Summary

4 Market Landscape

• 4.1 Market Overview
• 4.2 Market Drivers
  • 4.2.1 Rising Adoption of Waterborne and Low-VOC Formulations
  • 4.2.2 Demand for High-Performance Coating, Ink, and Adhesive Additives
  • 4.2.3 Growth of Packaging, Automotive, Electronics, and Construction Applications
  • 4.2.4 PFAS-Free Reformulation and Fluorine-Free Surface-Control Technologies
  • 4.2.5 High-Speed Coating and Printing Requiring Dynamic Wetting Control
  • 4.2.6 Additive Demand for Recycled and Low-Surface-Energy Substrates
• 4.3 Market Restraints
  • 4.3.1 Formulation Compatibility and Intercoat Adhesion Challenges
  • 4.3.2 Raw Material Price Volatility
  • 4.3.3 Performance and Qualification Burden for PFAS Alternatives
• 4.4 Value Chain Analysis
• 4.5 Porter's Five Forces Analysis
  • 4.5.1 Bargaining Power of Suppliers
  • 4.5.2 Bargaining Power of Buyers
  • 4.5.3 Threat of New Entrants
  • 4.5.4 Threat of Substitutes
  • 4.5.5 Competitive Rivalry

5 Market Size and Growth Forecasts (Value)

• 5.1 By Modifier Type
  • 5.1.1 Silicone-Based Modifiers
  • 5.1.2 Fluoropolymer-Based Modifiers
  • 5.1.3 Acrylic-Based Modifiers
  • 5.1.4 Other Modifier Types (Polyolefin-Based, Wax-Based, Other Surface Energy Modifiers)
• 5.2 By Substrate
  • 5.2.1 Plastics and Polymers
  • 5.2.2 Metals
  • 5.2.3 Glass
  • 5.2.4 Composites
  • 5.2.5 Other Substrates (Paper and Paperboard, Textiles, Other Substrates)
• 5.3 By Application
  • 5.3.1 Coatings
  • 5.3.2 Printing Inks
  • 5.3.3 Adhesives and Sealants
  • 5.3.4 Other Applications (Plastic Compounding, Films and Packaging, Mold Release, Other Applications)
• 5.4 By Geography
  • 5.4.1 Asia-Pacific
    • 5.4.1.1 China
    • 5.4.1.2 India
    • 5.4.1.3 Japan
    • 5.4.1.4 South Korea
    • 5.4.1.5 Rest of Asia-Pacific
  • 5.4.2 North America
    • 5.4.2.1 United States
    • 5.4.2.2 Canada
    • 5.4.2.3 Mexico
  • 5.4.3 Europe
    • 5.4.3.1 Germany
    • 5.4.3.2 United Kingdom
    • 5.4.3.3 France
    • 5.4.3.4 Italy
    • 5.4.3.5 Rest of Europe
  • 5.4.4 South America
    • 5.4.4.1 Brazil
    • 5.4.4.2 Argentina
    • 5.4.4.3 Rest of South America
  • 5.4.5 Middle-East and Africa
    • 5.4.5.1 Saudi Arabia
    • 5.4.5.2 South Africa
    • 5.4.5.3 Rest of Middle-East and Africa

6 Competitive Landscape

• 6.1 Market Concentration
• 6.2 Strategic Moves
• 6.3 Market Share (%)/Ranking Analysis
• 6.4 Company Profiles (includes Global Overview, Market Overview, Core Segments, Financials as available, Strategic Information, Products and Services, and Recent Developments)
  • 6.4.1 ALTANA
  • 6.4.2 Arkema
  • 6.4.3 BASF
  • 6.4.4 CLARIANT
  • 6.4.5 Croda International Plc
  • 6.4.6 Dow
  • 6.4.7 Eastman Chemical Company
  • 6.4.8 Elementis PLC
  • 6.4.9 Evonik Industries AG
  • 6.4.10 Huntsman Corporation
  • 6.4.11 Lubrizol
  • 6.4.12 Michelman, Inc.
  • 6.4.13 Momentive
  • 6.4.14 Munzing Corporation
  • 6.4.15 Nouryon

7 Market Opportunities and Future Outlook

• 7.1 White-Space and Unmet-Need Assessment