전기 및 전자 시험 장비 시장 : 시장 점유율 분석, 업계 동향 및 통계, 성장 예측(2026-2031년)

According to Mordor Intelligence, the electrical and electronic test equipment market size is expected to grow from USD 15.66 billion in 2025 to USD 16.31 billion in 2026 and is forecast to reach USD 19.95 billion by 2031 at 4.12% CAGR over 2026-2031.

This report is Segmented by Product Type (Oscilloscopes, Spectrum Analyzers, Signal Generators, and More), Form Factor (Benchtop, Portable, and Modular), Application Stage (R&D, Manufacturing, Installation, and Compliance), End-User Industry (Communications, Semiconductors, Automotive, Aerospace, Consumer Electronics, and More), and Geography. Market Forecasts in Value (USD).

Global Electrical And Electronic Test Equipment Market Trends and Insights

5G and Advanced Wireless Deployment Wave

Global 5G infrastructure expansion is driving unprecedented demand for millimeter-wave and sub-6 GHz analyzers, generators and over-the-air chambers. Operators need to validate beamforming, carrier aggregation and satellite backhaul performance across increasingly crowded spectrum allocations. Equipment must now simulate Doppler effects, GNSS timing and non-terrestrial network latency, tasks that conventional terrestrial RF sets cannot handle. Vendors are launching compact CATR ranges that shrink required floor space while retaining quiet-zone fidelity, a key need for consumer-device makers. Demand also flows from private-network deployments in manufacturing plants and logistics hubs, where spectral coexistence and ultra-reliability place fresh verification burdens on test labs. These factors collectively sustain momentum for the electrical and electronic test equipment market as wireless standards evolve toward 5G-Advanced and early 6G research.

Advanced-Node Semiconductor Complexity

Fabricating 3 nm and finer nodes multiplies test vectors as chipmakers adopt multi-die packaging and chiplet architectures. Industry association SEMI forecasts USD 6.7 billion in semiconductor test-equipment sales for 2024, with a 30.3% lift expected in 2025 as device complexity rises. Teradyne and partners now probe both sides of silicon-photonics wafers in one pass, slashing cycle times for co-packaged optics. High-bandwidth memory stacks, AI accelerators and on-package transceivers require tight thermal control and multi-gigabit interface coverage, pushing legacy ATE beyond its limits. Probe-card vendors FormFactor and Technoprobe have gained strategic investment from Advantest to secure next-gen contactor supply. The rising capital spend underpins long-term growth for the electrical and electronic test equipment market by widening addressable workloads.

High Capital Cost and Shift to Rentals

Flagship 5G or semiconductor ATE platforms can exceed USD 1 million apiece, straining capex budgets. Customers increasingly choose rental or subscription models; Electro Rent maintains USD 1.2 billion of inventory to meet these needs. The U.S. Equipment Leasing and Finance Association projects that 54% of equipment acquisitions will be financed in 2024 and expects Equipment-as-a-Service to grow 50% CAGR through 2030. While recurring revenue benefits vendors long term, near-term hardware sales flatten, tempering overall expansion of the electrical and electronic test equipment market.

Other drivers and restraints analyzed in the detailed report include:

1. EV and Power-Electronics Test Needs
2. AI/ML-Assisted Automated Testing
3. Low-Cost Asian Vendor Price Pressure

For complete list of drivers and restraints, kindly check the Table Of Contents.

Segment Analysis

The electrical and electronic test equipment market size for oscilloscopes stood at USD 4.61 billion in 2025, translating to a dominant 29.45% slice of total revenue. Oscilloscopes remain indispensable across R&D, validation, and troubleshooting, yet bandwidth ceilings and protocol-decode depth are now differentiators as designs push beyond 70 GHz. RF and microwave instruments are expanding at a 4.63% CAGR thanks to 5G non-terrestrial networks, satellite IoT, and automotive radar. Spectrum analyzers with real-time triggers and signal generators capable of 2 GHz modulation bandwidth are moving from lab to field use. Portable vector-network analyzers such as the 40 GHz USB-powered VNA400 are proof that miniaturization no longer compromises performance.

Semiconductor ATE faces cyclical buying tied to fab expansions but benefits from chiplet architectures that raise pin counts and drive multisite test. Environmental-stress chambers and electrical-safety testers are getting a lift from stricter IEC and UL updates, especially in battery-powered consumer devices. Optical-electrical convergence is spawning hybrid testers that measure insertion loss, eye diagrams, and RF impairments in a single workflow, meeting data-center demand for co-packaged optics. Overall, product diversification underpins revenue stability for the electrical and electronic test equipment market despite pockets of volatility.

Benchtop platforms deliver benchmark accuracy, intuitive front panels and robust input protection, securing 47.12% of 2025 revenue. They dominate early-stage design and university labs, where flexibility outranks rack density. Modular PXI systems, however, are climbing fastest with a 5.02% CAGR as users favor synchronized, software-defined channels for parallel test. The electrical and electronic test equipment market size attributed to PXI setups is forecast to exceed USD 5.18 billion by 2031 as factories digitize quality stations and shorten changeover cycles.

NI counts more than 600 PXI modules under its brand and 1,500 across the broader ecosystem, giving engineers a Lego-like palette of RF, mixed-signal, and power cards. ADLINK extends reach into mass-production lines with PXI-based parametric testers that rival proprietary rack systems on throughput. Handheld analyzers fill gap-filling tasks in field service, renewable-energy farms, and telecom tower audits, now featuring cloud dashboards for instant report generation. This convergence of form factors sustains healthy competition inside the electrical and electronic test equipment market.

Complete Report Scope:

• By Product Type
  • Oscilloscopes
  • Spectrum and Network Analyzers
  • Signal Generators
  • Semiconductor Automatic Test Equipment (ATE)
  • RF and Microwave Test Equipment
  • Data Acquisition (DAQ) Systems
  • Electrical and Environmental Safety Test
• By Form Factor
  • Benchtop
  • Portable / Hand-held
  • Modular / PXI / PC-based
• By Application Stage
  • Design and R&D
  • Manufacturing and Production
  • Installation and Maintenance
  • Certification and Compliance
• By End-user Industry
  • Communications and Networking
  • Semiconductors and Computing
  • Automotive and Electric Vehicles
  • Aerospace and Defense
  • Consumer Electronics and Appliances
  • Industrial and Energy
  • Healthcare and Life Sciences
  • Other End-user Industries
• By Geography
  • North America
    • United States
    • Canada
    • Mexico
  • South America
    • Brazil
    • Argentina
    • Chile
    • Rest of South America
  • Europe
    • Germany
    • United Kingdom
    • France
    • Italy
    • Netherlands
    • Rest of Europe
  • Asia-Pacific
    • China
    • India
    • Japan
    • South Korea
    • Rest of Asia-Pacific
  • Middle East and Africa
    • Middle East
      • Saudi Arabia
      • United Arab Emirates
      • Turkey
      • Rest of Middle East
    • Africa
      • South Africa
      • Nigeria
      • Rest of Africa

Geography Analysis

North America generated significant share on the back of defense R&D, fab expansions in Arizona and 5G C-band build-outs. Federal incentives and accredited calibration labs sustain a mature ecosystem that values traceability and rapid service. Canadian telecom carriers and electric-vehicle startups add incremental demand for compliance services.

Asia-Pacific is on track for a 5.22% CAGR and will likely approach parity with North America by 2031. China's push for indigenous semiconductors, Taiwan's leadership in advanced nodes and South Korean investments in memory assist volume growth. Southeast Asian nations provide a manufacturing off-load valve, creating greenfield opportunities for mid-range oscilloscopes and PXI racks. Indian telcos embracing Open RAN and Japanese automakers validating solid-state batteries add diverse revenue streams to the electrical and electronic test equipment market.

Europe shows moderate but stable growth as automotive electrification, renewable-energy targets, and digital-sovereignty initiatives keep capex flowing. Germany and France host significant calibration and rental operations, while Nordic nations pioneer 5G advanced field trials. Eastern European EMS providers attract near-shoring contracts, bolstering demand for entry-level but network-connected instruments. South America and the Middle East and Africa remain nascent yet promising, with mining automation, utility-scale solar, and airport upgrades enabling first-time installations of modular test benches.

1. Keysight Technologies Inc.
2. Rohde and Schwarz GmbH and Co. KG
3. Fortive Corporation (Fluke, Tektronix)
4. National Instruments Corporation (NI)
5. Anritsu Corporation
6. Teledyne LeCroy Inc.
7. Yokogawa Test and Measurement Corporation
8. Teradyne Inc.
9. Advantest Corporation
10. Chauvin Arnoux Group
11. VIAVI Solutions Inc.
12. EXFO Inc.
13. BandK Precision Corporation
14. Rigol Technologies Co., Ltd.
15. GW Instek (Good Will Instrument Co., Ltd.)
16. Hioki E.E. Corporation
17. Chroma ATE Inc.
18. Cobham Advanced Electronic Solutions
19. Spectrum Instrumentation GmbH
20. Signal Hound Inc.
21. Pico Technology Ltd.
22. Microchip Technology Inc. (Microsemi Timing Systems)

Additional Benefits:

• The market estimate (ME) sheet in Excel format
• 3 months of analyst support

TABLE OF CONTENTS

1 INTRODUCTION

• 1.1 Study Assumptions and Market Definition
• 1.2 Scope of the Study

2 RESEARCH METHODOLOGY

3 EXECUTIVE SUMMARY

4 MARKET LANDSCAPE

• 4.1 Market Overview
• 4.2 Market Drivers
  • 4.2.1 5G and Advanced Wireless Deployment Wave
  • 4.2.2 Advanced-Node Semiconductor Complexity
  • 4.2.3 EV and Power-Electronics Test Needs
  • 4.2.4 AI/ML-Assisted Automated Testing
  • 4.2.5 Ultra-Wide-Bandgap Device Characterization
  • 4.2.6 IoT Cyber-Security Compliance Mandates
• 4.3 Market Restraints
  • 4.3.1 High Capital Cost and Shift to Rentals
  • 4.3.2 Low-Cost Asian Vendor Price Pressure
  • 4.3.3 Precision-Component Supply Shortages
  • 4.3.4 Right-to-Repair Curtailing Proprietary Protocols
• 4.4 Industry Value Chain Analysis
• 4.5 Regulatory Landscape
• 4.6 Technological Outlook
• 4.7 Porter's Five Forces Analysis
  • 4.7.1 Bargaining Power of Suppliers
  • 4.7.2 Bargaining Power of Buyers
  • 4.7.3 Threat of New Entrants
  • 4.7.4 Threat of Substitutes
  • 4.7.5 Degree of Competition
• 4.8 Assessment of Key Macroeconomic Trends

5 MARKET SIZE AND GROWTH FORECASTS (VALUE)

• 5.1 By Product Type
  • 5.1.1 Oscilloscopes
  • 5.1.2 Spectrum and Network Analyzers
  • 5.1.3 Signal Generators
  • 5.1.4 Semiconductor Automatic Test Equipment (ATE)
  • 5.1.5 RF and Microwave Test Equipment
  • 5.1.6 Data Acquisition (DAQ) Systems
  • 5.1.7 Electrical and Environmental Safety Test
• 5.2 By Form Factor
  • 5.2.1 Benchtop
  • 5.2.2 Portable / Hand-held
  • 5.2.3 Modular / PXI / PC-based
• 5.3 By Application Stage
  • 5.3.1 Design and R&D
  • 5.3.2 Manufacturing and Production
  • 5.3.3 Installation and Maintenance
  • 5.3.4 Certification and Compliance
• 5.4 By End-user Industry
  • 5.4.1 Communications and Networking
  • 5.4.2 Semiconductors and Computing
  • 5.4.3 Automotive and Electric Vehicles
  • 5.4.4 Aerospace and Defense
  • 5.4.5 Consumer Electronics and Appliances
  • 5.4.6 Industrial and Energy
  • 5.4.7 Healthcare and Life Sciences
  • 5.4.8 Other End-user Industries
• 5.5 By Geography
  • 5.5.1 North America
    • 5.5.1.1 United States
    • 5.5.1.2 Canada
    • 5.5.1.3 Mexico
  • 5.5.2 South America
    • 5.5.2.1 Brazil
    • 5.5.2.2 Argentina
    • 5.5.2.3 Chile
    • 5.5.2.4 Rest of South America
  • 5.5.3 Europe
    • 5.5.3.1 Germany
    • 5.5.3.2 United Kingdom
    • 5.5.3.3 France
    • 5.5.3.4 Italy
    • 5.5.3.5 Netherlands
    • 5.5.3.6 Rest of Europe
  • 5.5.4 Asia-Pacific
    • 5.5.4.1 China
    • 5.5.4.2 India
    • 5.5.4.3 Japan
    • 5.5.4.4 South Korea
    • 5.5.4.5 Rest of Asia-Pacific
  • 5.5.5 Middle East and Africa
    • 5.5.5.1 Middle East
      • 5.5.5.1.1 Saudi Arabia
      • 5.5.5.1.2 United Arab Emirates
      • 5.5.5.1.3 Turkey
      • 5.5.5.1.4 Rest of Middle East
    • 5.5.5.2 Africa
      • 5.5.5.2.1 South Africa
      • 5.5.5.2.2 Nigeria
      • 5.5.5.2.3 Rest of Africa

6 COMPETITIVE LANDSCAPE

• 6.1 Market Concentration
• 6.2 Strategic Moves
• 6.3 Market Share Analysis
• 6.4 Company Profiles (includes Global level Overview, Market level overview, Core Segments, Financials as available, Strategic Information, Market Rank/Share, Products and Services, Recent Developments)
  • 6.4.1 Keysight Technologies Inc.
  • 6.4.2 Rohde and Schwarz GmbH and Co. KG
  • 6.4.3 Fortive Corporation (Fluke, Tektronix)
  • 6.4.4 National Instruments Corporation (NI)
  • 6.4.5 Anritsu Corporation
  • 6.4.6 Teledyne LeCroy Inc.
  • 6.4.7 Yokogawa Test and Measurement Corporation
  • 6.4.8 Teradyne Inc.
  • 6.4.9 Advantest Corporation
  • 6.4.10 Chauvin Arnoux Group
  • 6.4.11 VIAVI Solutions Inc.
  • 6.4.12 EXFO Inc.
  • 6.4.13 BandK Precision Corporation
  • 6.4.14 Rigol Technologies Co., Ltd.
  • 6.4.15 GW Instek (Good Will Instrument Co., Ltd.)
  • 6.4.16 Hioki E.E. Corporation
  • 6.4.17 Chroma ATE Inc.
  • 6.4.18 Cobham Advanced Electronic Solutions
  • 6.4.19 Spectrum Instrumentation GmbH
  • 6.4.20 Signal Hound Inc.
  • 6.4.21 Pico Technology Ltd.
  • 6.4.22 Microchip Technology Inc. (Microsemi Timing Systems)

7 MARKET OPPORTUNITIES AND FUTURE OUTLOOK

• 7.1 White-space and Unmet-Need Assessment