세계의 유압작동유 시장 : 시장 규모(2025-2034년)

Hydraulic Fluids-

The global hydraulic fluids market supplies the oils and fluids that transmit power, lubricate components, and protect hydraulic systems in machines large and small. Hydraulic fluids are used wherever controlled force and motion are needed - from construction excavators and farm tractors to aircraft flight controls and factory presses. Over the past decade the market has expanded steadily as industries pursue higher equipment uptime, lower maintenance costs, and improved environmental performance. Modern hydraulic fluids are expected to do more than transmit power: they must resist wear, prevent corrosion, handle extreme temperatures, and meet safety or food-contact rules where appropriate. That combination of performance and regulation shapes product choices and purchasing decisions across regions and sectors.

Demand by Segments

Demand breaks down first by base oil type and then by application. Mineral oil-based hydraulic fluids remain the largest segment because they are cost-effective, widely available and satisfy the needs of many common systems. Synthetic oils - such as phosphate esters, polyalphaolefins (PAOs), and diesters - are chosen when fire resistance, wide temperature range or long fluid life are essential, for example in aviation, steel mills, and some industrial plants. Semi-synthetic blends attempt to balance cost and performance, offering better oxidation stability and low-temperature flow than pure mineral oils without the full price of synthetics. Bio-based oils are growing fast in niche and regulated areas where biodegradability and reduced environmental impact matter, such as marine hydraulics, forestry, and food-processing facilities.

On the application side, transportation is a diverse category. In automotive and mobile hydraulics (agriculture, construction equipment) fluids must handle contamination, variable loads and frequent pressure spikes. Aviation uses specialized fluids where fire resistance, thermal stability and low volatility are critical. Marine systems increasingly use biodegradable alternatives to reduce the environmental harm of leaks. Outside transportation, mining and construction demand durable fluids that withstand contamination and high mechanical stress. Oil & gas and heavy industry require fluids compatible with harsh chemicals and extreme operating conditions. The food & beverage sector requires NSF or food-grade formulations for hydraulic systems that could contact product. These application needs drive the mix of base oils and additive packages sold in each segment.

Regional Demand Analysis

Regional demand reflects local industry mix, regulation, and fleet size. Asia-Pacific is the largest volume market, led by heavy construction, manufacturing, and a growing automotive base in China, India and Southeast Asia. Rapid infrastructure development and replacement cycles support steady hydraulic fluid consumption there. North America remains a high-value market where replacement, preventative maintenance and demand for high-performance synthetic fluids are strong because of mature industries and stringent safety standards. Europe emphasizes environmental rules and workplace safety, which boosts adoption of fire-resistant and biodegradable fluids in some sectors. Latin America, the Middle East and Africa are smaller but growing markets where mining, oil & gas projects and building activity drive demand; cost sensitivity in these regions often favors mineral oils or semi-synthetic grades unless regulation dictates otherwise. Overall, market growth is a mix of volume from emerging regions and value from demand for advanced fluids in developed markets.

Key Manufacturers

The hydraulic fluids market is supplied by a mix of global oil majors and specialist lubricant companies. Large integrated oil and gas companies such as Shell, ExxonMobil, BP, Chevron, Total, and Sinopec / PetroChina have broad portfolios that include mineral, synthetic and fire-resistant hydraulic fluids and extensive distribution networks. These firms leverage global supply chains and R&D to certify fluids for OEM equipment. Regional and specialty players - for example Idemitsu Kosan, Indian Oil Corporation (IOCL), Valvoline, Lukoil, Morris Lubricants, Peak Lubricants, Penrite, Amalie, ENI, and Rock Valley Oil - serve local markets with tailored grades and technical support. Many of these companies also supply additives and maintenance services, helping customers manage fluid life, contamination control and regulatory compliance. Competition centers on product performance, OEM approvals, price, and service capability.

Market Driver

Several clear trends are driving market growth. First, industrialization and infrastructure investment in emerging economies increase the number of hydraulic machines in service, raising fluid consumption for production and maintenance. Second, fleet modernization and performance requirements in automotive, aviation and heavy equipment push demand for higher-spec synthetics and long-life fluids that reduce downtime and extend service intervals. Third, safety and environmental regulations - especially fire-safe fluid standards in industry and biodegradability requirements near waterways - encourage the adoption of esters, water-glycol blends and bio-based fluids. Fourth, preventive maintenance and life-cycle cost management strategies favor higher-quality fluids and filtration, which raises average selling prices even if unit volumes are stable. Finally, growth of renewable energy and automated manufacturing introduces new hydraulic system designs and duty cycles that require advanced fluid chemistries.

Table of Contents

1. Introduction

• Scope
• Market Coverage
  • Base Oil Types
  • Applications
  • Regions
  • Countries
• Years Considered
  • Historical - 2018 - 2023
  • Base - 2024
  • Forecast Period - 2025 - 2034
• Research Methodology
  • Approach
  • Research Methodology
  • Prismane Consulting Market Models
  • Assumptions & Limitations
  • Abbreviations & Definitions
  • Conversion Factors
  • Data Sources

2. Market Synopsis

• Market Evolution
• Demand Overview
• Industry Structure
• Strategic Issues
• End-use Trends
• Growth Forecast

3. Economic & Energy Outlook

• GDP and Demographics
• Monetary & Fiscal Policies
• Crude Oil Production and prices
• Natural Gas
• Electricity Prices

4. End-use Sector Performance and COVID-19 Impact

• Transportation
• Mining
• Construction
• Oil & Gas
• Food & Beverages
• Industrial
• Others

5. Introduction to Hydraulic Fluids and Market Overview

• Product Description
• Grades & Properties
• Raw Material
• Manufacturing Process
• Environmental Issues
• Value Chain
• Applications

6. Market Dynamics and Industry Trends

• Market Dynamics
  • Drivers
  • Restraints
  • Opportunities
  • Challenges

7. Global Hydraulic Fluids Demand Analysis, By Base Oil Types, By Applications (Volume, Value) (2018-2034)

• Strategic Issues and COVID-19 Impact
• Demand Analysis and Forecast (2018-2034)
  • Demand
  • Demand Growth Rate (%)
  • Driving Force Analysis
  • Global Hydraulic Fluids Market, By Base Oil Types
• Mineral Oil
• Synthetic Oil
• Semi-Synthetic Oil
• Bio-Based Oil
  • Global Hydraulic Fluids Market, By Applications
• Original Equipment Manufacturers (OEM's)
• Mining
• Construction
• Transportation
  • Automotive
  • Aviation
  • Marine
• Oil & Gas
• Food & Beverage
• Others

8. Demand Analysis and Market Review, By Region, By Country (Volume, Value), (2018-2034)

• Strategic Issues and COVID-19 Impact
• Demand Analysis and Forecast (2018-2034)
• Demand
• Demand Growth Rate (%)
• Hydraulic Fluids Market, By Base Oil Types
• Hydraulic Fluids Market, By Applications

Note: Demand Analysis has been provided for all major Regions / Countries as mentioned below. The demand (consumption) split by base oil types and applications have been provided for each of the countries / regions in Volume (Kilo tons) and Value (USD Million).

• North America
• USA
• Canada
• Mexico
• Western Europe
• Germany
• France
• Italy
• United Kingdom
• Spain
• Rest of Western Europe
• Central & Eastern Europe
• Russia
• Poland
• Rest of Central & Eastern Europe
• Asia-Pacific
• China
• Japan
• India
• South Korea
• Rest of Asia-Pacific
• Central & South America
• Middle East & Africa

Note: CAGR will be calculated for all base oil types and applications to arrive at the regional / global demand growth for the forecast period (2025 - 2034)

9. Pricing Analysis

10. Key Strategic Issues and Business Opportunity Assessment

• Market Attractiveness Assessment
• Prospective & Target Market Study

11. Strategic Recommendation & Suggestions

12. Company Analysis

• Hydraulic Fluids Manufacturers Profiles/ Company Analysis
  • Basic Details
  • Headquarter, Key Markets
  • Ownership
  • Company Financial
  • Manufacturing Bases
  • Global Turnover
  • Total Employee
  • Product Portfolio / Services / Solutions
  • Recent Developments
  • Companies Covered -
• Shell Corporation
• ExxonMobil
• British Petroleum
• Chevron Corporation
• Total
• Petrochina
• Idemitsu Kosan
• Indian Oil Corporation (IOCL)
• Sinopec
• Valvoline
• Lukoil
• Morris Lubricants
• Peak Lubricants
• Penrite Oil
• Amalie Oil Company
• ENI SPA
• Rock Valley Oil & Chemical Company
• Other Manufacturers

Note: This section includes company information, company financials, manufacturing bases and operating regions. Company financials have been mentioned only for those companies where financials were available in SEC Filings, annual reports, or company websites. All the reported financials in this report are in U.S. Dollars. Financials reported in other currencies have been converted using average currency conversion rates. Company profiles may include manufacturers, suppliers, and distributors.

13. Appendices

• Demand - Regions
• Demand - Countries