자동차용 노크 센서 시장 규모, 점유율, 성장 분석 : 유형별, 용도별, 기술별, 제품 유형별, 최종사용자별, 유통 채널별, 차량 유형별, 추진별, 지역별 - 산업 예측(2024-2031년)

Global Automotive Knock Sensor Market size was valued at USD 9.03 billion in 2022 and is poised to grow from USD 9.48 billion in 2023 to USD 14.01 billion by 2031, growing at a CAGR of 5.0% during the forecast period (2024-2031).

The automotive knock sensor market is set for significant growth as the demand for passenger cars and commercial vehicles continues to rise. Positioned within the engine block or cylinder head, these sensors play a crucial role in detecting knocking sounds caused by combustion instability, utilizing piezoelectric components that generate electrical signals in response to vibrations from detonation. By facilitating timely adjustments in engine timing to counteract spark knock, knock sensors can prolong engine life and prevent potential failures associated with engine knocking. With advancements in autonomous vehicle technology and increased public funding for detection systems, the market is poised for expansion. However, challenges such as software malfunctions and high costs associated with vehicle infrastructure may impede growth. On the positive side, strategic partnerships among automakers and LiDAR technology providers could unveil new opportunities in the sensing sector for commercial vehicles. Additionally, government initiatives advocating for enhanced vehicle technology to improve public safety are likely to further propel market growth. Overall, the automotive knock sensor market presents a dynamic landscape influenced by technological innovations, regulatory support, and evolving consumer demands.

Top-down and bottom-up approaches were used to estimate and validate the size of the Global Automotive Knock Sensor market and to estimate the size of various other dependent submarkets. The research methodology used to estimate the market size includes the following details: The key players in the market were identified through secondary research, and their market shares in the respective regions were determined through primary and secondary research. This entire procedure includes the study of the annual and financial reports of the top market players and extensive interviews for key insights from industry leaders such as CEOs, VPs, directors, and marketing executives. All percentage shares split, and breakdowns were determined using secondary sources and verified through Primary sources. All possible parameters that affect the markets covered in this research study have been accounted for, viewed in extensive detail, verified through primary research, and analyzed to get the final quantitative and qualitative data.

Global Automotive Knock Sensor Market Segmental Analysis

Global Automotive Knock Sensor Market is segmented by type, application, technology, product type, end user, distribution channel, vehicle type, propulsion and region. Based on type, the market is segmented into linear frequency sensor and wide range frequency sensor. Based on application, the market is segmented into single cylinder engines and multi cylinder engines. Based on technology, the market is segmented into piezoelectric sensors, mems sensors and others. Based on product type, the market is segmented into 1 circuit, 2 circuit, 4 circuit, 6 circuit and others. Based on end user, the market is segmented into OEM (original equipment manufacturer) and aftermarket. Based on distribution channel, the market is segmented into offline and online. Based on vehicle type, the market is segmented into passenger cars and commercial vehicles. Based on propulsion, the market is segmented into gasoline, diesel and electric & hybrid. Based on region, the market is segmented into North America, Europe, Asia Pacific, Latin America and Middle East & and Africa.

Driver of the Global Automotive Knock Sensor Market

One of the key drivers of the global automotive knock sensor market is the implementation of stringent emissions regulations by governments worldwide. These regulations compel automotive manufacturers to design engines that are more fuel-efficient and release fewer harmful pollutants, including nitrogen oxides (NOx). As governments intensify their efforts to address environmental issues through stricter emission standards, the demand for advanced automotive technologies, such as knock sensors, is expected to rise significantly. This trend is likely to contribute to the overall growth of the automotive knock sensor market, as manufacturers seek to comply with these evolving regulations and improve engine performance.

Restraints in the Global Automotive Knock Sensor Market

A major constraint affecting the global automotive knock sensor market is the lack of knowledge and adoption of this technology in developing regions. Emerging markets often trail behind their developed counterparts in terms of technological awareness and utilization, which creates a substantial hurdle for market growth. In contrast, developed nations exhibit robust demand for advanced engine technologies to meet consumer expectations and adhere to stringent emissions regulations. This disparity in technological adoption has resulted in limited market penetration in emerging economies, thereby constraining the overall growth potential of the automotive knock sensor market on a global scale.

Market Trends of the Global Automotive Knock Sensor Market

The Global Automotive Knock Sensor market is witnessing a significant trend towards the integration of advanced sensor technologies to enhance performance and efficiency. Manufacturers are increasingly leveraging innovations such as digital signal processing, artificial intelligence algorithms, and multi-frequency detection to develop sophisticated knock sensor solutions. These advancements enable precise identification and mitigation of engine knock, contributing to improved engine performance, increased fuel efficiency, and stricter emissions control. As automakers prioritize sustainability and operational excellence, the demand for cutting-edge knock sensors is expected to rise, positioning this market for robust growth in the coming years.

Table of Contents

Introduction

• Objectives of the Study
• Scope of the Report
• Definitions

Research Methodology

• Information Procurement
• Secondary & Primary Data Methods
• Market Size Estimation
• Market Assumptions & Limitations

Executive Summary

• Global Market Outlook
• Supply & Demand Trend Analysis
• Segmental Opportunity Analysis

Market Dynamics & Outlook

• Market Overview
• Market Size
• Market Dynamics
  • Driver & Opportunities
  • Restraints & Challenges
• Porters Analysis & Impact
  • Competitive rivalry
  • Threat of substitute
  • Bargaining power of buyers
  • Threat of new entrants
  • Bargaining power of suppliers

Key Market Insights

• Key Success Factors
• Degree of Competition
• Top Investment Pockets
• Market Ecosystem
• Regulatory Landscape
• Patent Analysis
• Value Chain Analysis
• Case Study Analysis
• Customer & Buying Criteria Analysis
• PESTEL Analysis
• Macro-Economic Indicators
• Trade Analysis
• Market Attractiveness Index
• Pricing Analysis

Automotive Knock Sensor Market Size by Type & CAGR (2024-2031)

• Market Overview
• Linear Frequency Sensor
• Wide Range Frequency Sensor

Automotive Knock Sensor Market Size by Application & CAGR (2024-2031)

• Market Overview
• Single Cylinder Engines
• Multi Cylinder Engines

Automotive Knock Sensor Market Size by Technology & CAGR (2024-2031)

• Market Overview
• Piezoelectric Sensors
• MEMS Sensors
• Others

Automotive Knock Sensor Market Size by Product Type & CAGR (2024-2031)

• Market Overview
• 1 Circuit
• 2 Circuit
• 4 Circuit
• 6 Circuit
• Other

Automotive Knock Sensor Market Size by End User & CAGR (2024-2031)

• Market Overview
• OEM (Original Equipment Manufacturer)
• Aftermarket

Automotive Knock Sensor Market Size by Distribution Channel & CAGR (2024-2031)

• Market Overview
• Offline
• Online

Automotive Knock Sensor Market Size by Vehicle Type & CAGR (2024-2031)

• Market Overview
• Passenger Cars
• Commercial Vehicles

Automotive Knock Sensor Market Size by Propulsion & CAGR (2024-2031)

• Market Overview
• Gasoline
• Diesel
• Electric & Hybrid

Automotive Knock Sensor Market Size & CAGR (2024-2031)

• North America, (Type, Application, Technology, Product Type, End User, Distribution Channel, Vehicle Type, Propulsion)
  • US
  • Canada
• Europe, (Type, Application, Technology, Product Type, End User, Distribution Channel, Vehicle Type, Propulsion)
  • UK
  • Germany
  • Spain
  • France
  • Italy
  • Rest of Europe
• Asia-Pacific, (Type, Application, Technology, Product Type, End User, Distribution Channel, Vehicle Type, Propulsion)
  • China
  • India
  • Japan
  • South Korea
  • Rest of Asia Pacific
• Latin America, (Type, Application, Technology, Product Type, End User, Distribution Channel, Vehicle Type, Propulsion)
  • Brazil
  • Rest of Latin America
• Middle East & Africa, (Type, Application, Technology, Product Type, End User, Distribution Channel, Vehicle Type, Propulsion)
  • GCC Countries
  • South Africa
  • Rest of Middle East & Africa

Competitive Intelligence

• Top 5 Player Comparison
• Market Positioning of Key Players, 2023
• Strategies Adopted by Key Market Players
• Recent Developments in the Market
• Company Market Share Analysis, 2023
• Company Profiles of All Key Players
  • Company Details
  • Product Portfolio Analysis
  • Company's Segmental Share Analysis
  • Revenue Y-O-Y Comparison (2021-2023)

Key Company Profiles

• Robert Bosch GmbH
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Continental AG
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Denso Corporation
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Delphi Technologies
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Hitachi Automotive Systems
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• NGK Spark Plug Co., Ltd.
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Sensata Technologies
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Standard Motor Products
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Walker Products
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• ACDelco
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Bosch Mobility Solutions
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Mitsubishi Electric Corporation
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Infineon Technologies AG
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Hella GmbH & Co. KGaA
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Valeo
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• ZF Friedrichshafen AG
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• BorgWarner Inc.
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Analog Devices, Inc.
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• CTS Corporation
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Melexis
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments

Conclusion & Recommendation