세계의 툴 홀더 어댑터 시장 규모 : 유형별, 용도별, 지역별, 범위 및 예측

Tool Holder Adapters Market Size And Forecast

Tool Holder Adapters Market size was valued at USD 3 Billion in 2024 and is projected to reach USD 4.5 Billion by 2031, growing at a CAGR of 4.52% from 2024 to 2031. The use of an advanced tool holder that holds rigidity, accuracy, power, and balance is extended cutting tool life, extended spindle life, better surface finish and accuracy of parts act as the growth key driver of the Tool Holder Adapters Market. The Global Tool Holder Adapters Market report provides a holistic evaluation of the market. The report offers a comprehensive analysis of key segments, trends, drivers, restraints, competitive landscape, and factors that are playing a substantial role in the market.

Global Tool Holder Adapters Market Definition

Tool holders refer to adapters used to mount tools such as cutting tools, drills, and turning tools in machine tool equipment. In a machining operation, selecting an efficient tool holder is as crucial as selecting an appropriate cutting tool. For mellow machining operations, it is very important that the tool is properly inserted in the collet and rotates through its cutting path with minimal run-out. To make the sure bare loss of tool efficiency and to avoid any deflection from the clamping source, it is important that the collet clamps the tools effectively.

Besides, ball bearing collet nuts are used to ensure the same. Ball-bearing in the collet authorizes an operator to run both clockwise and counterclockwise tools in the same tool holder. This type of bearing also eliminates the possibility of tool slippage during the routing process. While changing the tool: it is important to set up the tool in the correct tool changing fixture to ensure the proper securing of the tool holder. The tool holder has equal importance as the cutting tool in the overall machine tools industry ecosystem. Innovation in tool holding systems has been slower than innovation in machines. Balancing becomes a critical factor as spindle speeds rise. Centrifugal forces act on the tool holder and cutting tool.

Any imbalance creates vibrations. Individually balanced tool holders are critical when spindle speeds approach those of high-speed machining. Modern machines and tools place greater demands on tool holders. This is particularly true when cemented carbide endmills and drills are used at very high speeds, where a very low run-out is required to achieve long tool life. It is important to ensure that the tool holder has not been damaged and the parts are free from dust. To attain the best performance, it is recommended to disassemble the tool assemblies and clean all male and female parts. Lubricate the parts with oil at least once a year.

What's inside a VMR industry report?

Our reports include actionable data and forward-looking analysis that help you craft pitches, create business plans, build presentations and write proposals.

Global Tool Holder Adapters Market Overview

The rise in disposable income acts as a primary growth driver in the Global Tool Holder Adapters Market. Toolholders are often one of the last pieces in the manufacturing process that are evaluated, but tool holders play a critical role in connecting all other elements to maximize machining performance. Furthermore, using a quality tool holder that has excellent taper contact, accuracy, and balance, will give a better fit, more rigidity, and fewer vibrations which is the main cause of premature spindle wear or failure. The tool holder is available in shapes such as cylindrical and conical.

The tool holder is used in milling, drilling, and boring industries. It has a short steel bar with a shank at one end, which is clamped to machine tools. It possesses features such as rigid, accuracy, power, and balance. The use of an advanced tool holder that holds rigidity, accuracy, power, and balance is extended cutting tool life, extended spindle life, better surface finish and accuracy of parts act as the growth key driver of the Tool Holder Adapters Market. Also, growth in urbanization and industrialization in emerging countries such as Germany, France, the U.S., and others drives the demand for automotive vehicles.

This is expected to fuel the demand for Tool Holder Adapters Market. On the contrary, fluctuation in foreign currencies and volatile economic conditions in the developing economies act as the restraining factor and diminish the growth of the Tool Holder Adapters Market. Also, it includes a large investment of money and space for the machine to heat up the tool holders which hamper the growth of the Tool Holder Adapters Market.

Global Tool Holder Adapters Market: Segmentation Analysis

The Global Tool Holder Adapters Market is Segmented on the basis of Type, Application, And Geography.

Tool Holder Adapters Market, By Type

• Collet Chuck
• End Mill Holders
• Hydraulic Tool Holders
• Milling Cutters Holder
• Shrink Fit Holders
• Others

Based on Type, The market is segmented into Collet Chunk, End Mill Holders, Hydraulic Tool Holders, Milling Cutters Holder, Shrink Fit Holders, and Others. The Collet Chunk segment holds a big market share. The collet chucks have less mass, so the lathe spindle gets up to speed faster and puts less strain on the spindle motor. Also, the hydraulic tool holder works by using fluid to compress an internal membrane within the holder body.

Tool Holder Adapters Market, By Application

• Automotive
• Chemical Processing
• Construction
• Defense And Aerospace
• Electronic
• General Machining
• Medical/Research
• Oil And Gas
• Paper And Pulp Industry
• Power Generation

Based on Application, The market is segmented into Automotive, Chemical Processing, Construction, Defense And Aerospace, Electronic, General Machining, Medical/Research, Oil And Gas, Paper And Pulp Industry, and Power Generation. The Automotive segment holds a big market share. Automotive production is all about speed and accuracy. The goal is to reduce cycle times and increase part quality. It offers a full array of threading, drilling, and tool holders that help manufacturers reach maximum efficiency and productivity.

Tool Holder Adapters Market, By Geography

• North America
• Europe
• Asia Pacific
• Rest of the world
• On the basis of Geography, The Tool Holder Adapters Market is classified into North America, Europe, Asia Pacific, and the Rest of the world. The Asia Pacific region is expected to witness the highest CAGR during the forecast period. This is primarily due to the rise in disposable income in these countries, and the growth in urbanization.

Key Players

• The "Global Tool Holder Adapters Market" study report will provide valuable insight with an emphasis on the global market including some of the major players such as
• GUHDO, Bilz Tool, LMT Onsrud, TAC Rockford, Gem Precision Tool, Kennametal, Sandvik Coromant, KTA Spindle Toolings, CERATIZIT, SECO and among others.

Our market analysis also entails a section solely dedicated to such major players wherein our analysts provide an insight into the financial statements of all the major players, along with its product benchmarking and SWOT analysis. The competitive landscape section also includes key development strategies, market share, and market ranking analysis of the above-mentioned players globally.

Key Developments

• In March 2022, Sandvik had announced to launch of the latest cutting tools and solutions including the next generation solid carbide Coro Drill 860 with PM geometry.
• In July 2021, Sandvik had announced to acquired premium solid round tools company Chuzhou Yongpu Carbide Tools Co., Ltd. Sandvik has signed an agreement to acquire 67% of Chuzhou Yongpu Carbide Tools Co., Ltd, a China based premium solid round tools company.

TABLE OF CONTENTS

1 INTRODUCTION OF GLOBAL TOOL HOLDER ADAPTERS MARKET

• 1.1 Overview of the Market
• 1.2 Scope of Report
• 1.3 Assumptions

2 EXECUTIVE SUMMARY

3 RESEARCH METHODOLOGY OF VERIFIED MARKET RESEARCH

• 3.1 Data Mining
• 3.2 Validation
• 3.3 Primary Interviews
• 3.4 List of Data Sources

4 GLOBAL TOOL HOLDER ADAPTERS MARKET OUTLOOK

• 4.1 Overview
• 4.2 Market Dynamics
  • 4.2.1 Drivers
  • 4.2.2 Restraints
  • 4.2.3 Opportunities
• 4.3 Porters Five Force Model
• 4.4 Value Chain Analysis

5 GLOBAL TOOL HOLDER ADAPTERS MARKET, BY TYPE

• 5.1 Overview
• 5.2 Collet Chuck
• 5.3 End Mill Holders
• 5.4 Hydraulic Tool holders
• 5.5 Milling Cutters Holder
• 5.6 Shrink Fit Holders
• 5.7 Others

6 GLOBAL TOOL HOLDER ADAPTERS MARKET, BY APPLICATION

• 6.1 Overview
• 6.2 Automotive
• 6.3 Chemical Processing
• 6.4 Construction
• 6.5 Defense And Aerospace
• 6.6 Electronic
• 6.7 General Machining
• 6.8 Medical/Research
• 6.9 Oil And Gas
• 6.10 Paper And Pulp Industry
• 6.11 Power Generation

7 GLOBAL TOOL HOLDER ADAPTERS MARKET, BY GEOGRAPHY

• 7.1 Overview
• 7.2 North America
  • 7.2.1 U.S.
  • 7.2.2 Canada
  • 7.2.3 Mexico
• 7.3 Europe
  • 7.3.1 Germany
  • 7.3.2 U.K.
  • 7.3.3 France
  • 7.3.4 Rest of Europe
• 7.4 Asia Pacific
  • 7.4.1 China
  • 7.4.2 Japan
  • 7.4.3 India
  • 7.4.4 Rest of Asia Pacific
• 7.5 Rest of the World
  • 7.5.1 Latin America
  • 7.5.2 Middle East and Africa

8 GLOBAL TOOL HOLDER ADAPTERS MARKET COMPETITIVE LANDSCAPE

• 8.1 Overview
• 8.2 Company Market Ranking
• 8.3 Key Development Strategies

9 COMPANY PROFILES

• 9.1 GUHDO
  • 9.1.1 Overview
  • 9.1.2 Financial Performance
  • 9.1.3 Product Outlook
  • 9.1.4 Key Developments
• 9.2 Bilz Tool
  • 9.2.1 Overview
  • 9.2.2 Financial Performance
  • 9.2.3 Product Outlook
  • 9.2.4 Key Developments
• 9.3 LMT Onsrud
  • 9.3.1 Overview
  • 9.3.2 Financial Performance
  • 9.3.3 Product Outlook
  • 9.3.4 Key Developments
• 9.4 TAC Rockford
  • 9.4.1 Overview
  • 9.4.2 Financial Performance
  • 9.4.3 Product Outlook
  • 9.4.4 Key Developments
• 9.5 Gem Precision Tool
  • 9.5.1 Overview
  • 9.5.2 Financial Performance
  • 9.5.3 Product Outlook
  • 9.5.4 Key Developments
• 9.6 Kennametal
  • 9.6.1 Overview
  • 9.6.2 Financial Performance
  • 9.6.3 Product Outlook
  • 9.6.4 Key Developments
• 9.7 Sandvik Coromant
  • 9.7.1 Overview
  • 9.7.2 Financial Performance
  • 9.7.3 Product Outlook
  • 9.7.4 Key Developments
• 9.8 KTA Spindle Toolings
  • 9.8.1 Overview
  • 9.8.2 Financial Performance
  • 9.8.3 Product Outlook
  • 9.8.4 Key Developments
• 9.9 CERATIZIT
  • 9.9.1 Overview
  • 9.9.2 Financial Performance
  • 9.9.3 Product Outlook
  • 9.9.4 Key Developments
• 9.10 SECO
  • 9.10.1 Overview
  • 9.10.2 Financial Performance
  • 9.10.3 Product Outlook
  • 9.10.4 Key Developments

10 Appendix

• 10.1 Related Research