자동차 부품용 아연 다이캐스트 시장 규모, 점유율, 성장 분석 : 재료별, 최종 용도별, 지역별 - 산업 예측(2025-2032년)

Global Automotive Parts Zinc Die Casting Market size was valued at USD 3.9 billion in 2023 and is poised to grow from USD 4.04 billion in 2024 to USD 5.32 billion by 2032, growing at a CAGR of 3.5% during the forecast period (2025-2032).

The global automotive parts zinc die casting market is witnessing a surge in demand due to several key trends. Light and fuel-efficient vehicles play a vital role, with zinc alloys offering exceptional strength-to-weight ratios. Innovations in precision die casting technologies accelerate the production of high-quality, intricate parts, while the growing electric vehicle segment drives the need for lightweight, durable components. Additionally, increasing emphasis on sustainability promotes the use of recyclable zinc, aligning with environmental regulations. Cost-effective mass production capabilities further enhance the appeal for manufacturers aiming to reduce expenses without compromising quality. However, challenges such as fluctuating zinc prices, high initial investments in tooling, competition from alternative materials, and quality control issues pose significant barriers for suppliers in the evolving market landscape.

Top-down and bottom-up approaches were used to estimate and validate the size of the Global Automotive Parts Zinc Die Casting market and to estimate the size of various other dependent submarkets. The research methodology used to estimate the market size includes the following details: The key players in the market were identified through secondary research, and their market shares in the respective regions were determined through primary and secondary research. This entire procedure includes the study of the annual and financial reports of the top market players and extensive interviews for key insights from industry leaders such as CEOs, VPs, directors, and marketing executives. All percentage shares split, and breakdowns were determined using secondary sources and verified through Primary sources. All possible parameters that affect the markets covered in this research study have been accounted for, viewed in extensive detail, verified through primary research, and analyzed to get the final quantitative and qualitative data.

Global Automotive Parts Zinc Die Casting Market Segments Analysis

Global Automotive Parts Zinc Die Casting Market is segmented by Material, Application, End Use and region. Based on Material, the market is segmented into Zinc Alloys, Aluminum Alloys, Magnesium Alloys and Others. Based on Application, the market is segmented into Interior Parts, Exterior Parts, Powertrain Components and Others. Based on End Use, the market is segmented into Passenger Cars, Commercial Vehicles, Industrial Machinery and Others. Based on region, the market is segmented into North America, Europe, Asia Pacific, Latin America and Middle East & Africa.

Driver of the Global Automotive Parts Zinc Die Casting Market

The growth of the global automotive parts zinc die casting market is significantly driven by recent advancements in precision casting technology, which enable the production of intricate, thin-walled zinc components with exceptional dimensional accuracy and reduced porosity. The introduction of automatic, high-speed die casting machinery combined with vacuum systems enhances the quality and reliability of these parts. These technological improvements empower automobile manufacturers to meet stringent industry standards, thereby boosting the adoption of zinc die casting in the automotive sector. As a result, this trend is leading to a substantial expansion of the market for zinc die casting within the automotive industry.

Restraints in the Global Automotive Parts Zinc Die Casting Market

The Global Automotive Parts Zinc Die Casting market faces significant challenges due to the substantial initial investments required for die casting equipment, molds, and accessories. This financial burden acts as a major obstacle for smaller producers, hindering their entry into the zinc die casting sector. The high capital intensity not only restricts competition but also stifles innovation among smaller firms. As a result, established players tend to consolidate their market dominance, controlling access to advanced casting technologies and thereby shaping regional dynamics and opportunities. This landscape underscores the barriers faced by new entrants in the industry.

Market Trends of the Global Automotive Parts Zinc Die Casting Market

The Global Automotive Parts Zinc Die Casting market is witnessing a significant upward trajectory driven by the accelerating transition to electric vehicles (EVs). As manufacturers focus on enhancing efficiency and performance, the demand for high-strength, lightweight components has surged. Zinc die casting technologies enable the production of intricate, thin-walled parts that are essential for EV infrastructure, including battery enclosures and structural components. This increasing reliance on innovative materials underscores the automotive industry's broader commitment to sustainability and weight reduction, solidifying zinc die casting's role as a crucial solution in the development of advanced automotive applications and enhancing overall vehicle performance.

Table of Contents

Introduction

• Objectives of the Study
• Scope of the Report
• Definitions

Research Methodology

• Information Procurement
• Secondary & Primary Data Methods
• Market Size Estimation
• Market Assumptions & Limitations

Executive Summary

• Global Market Outlook
• Supply & Demand Trend Analysis
• Segmental Opportunity Analysis

Market Dynamics & Outlook

• Market Overview
• Market Size
• Market Dynamics
  • Drivers & Opportunities
  • Restraints & Challenges
• Porters Analysis
  • Competitive rivalry
  • Threat of substitute
  • Bargaining power of buyers
  • Threat of new entrants
  • Bargaining power of suppliers

Key Market Insights

• Key Success Factors
• Degree of Competition
• Top Investment Pockets
• Market Ecosystem
• Market Attractiveness Index, 2024
• PESTEL Analysis
• Macro-Economic Indicators
• Value Chain Analysis
• Pricing Analysis
• Case Studies
• Technology Analysis

Global Automotive Parts Zinc Die Casting Market Size by Material & CAGR (2025-2032)

• Market Overview
• Zinc Alloys
• Aluminum Alloys
• Magnesium Alloys
• Others

Global Automotive Parts Zinc Die Casting Market Size by Application & CAGR (2025-2032)

• Market Overview
• Interior Parts
• Exterior Parts
• Powertrain Components
• Others

Global Automotive Parts Zinc Die Casting Market Size by End Use & CAGR (2025-2032)

• Market Overview
• Passenger Cars
• Commercial Vehicles
• Industrial Machinery
• Others

Global Automotive Parts Zinc Die Casting Market Size & CAGR (2025-2032)

• North America (Material, Application, End Use)
  • US
  • Canada
• Europe (Material, Application, End Use)
  • Germany
  • Spain
  • France
  • UK
  • Italy
  • Rest of Europe
• Asia Pacific (Material, Application, End Use)
  • China
  • India
  • Japan
  • South Korea
  • Rest of Asia-Pacific
• Latin America (Material, Application, End Use)
  • Brazil
  • Rest of Latin America
• Middle East & Africa (Material, Application, End Use)
  • GCC Countries
  • South Africa
  • Rest of Middle East & Africa

Competitive Intelligence

• Top 5 Player Comparison
• Market Positioning of Key Players, 2024
• Strategies Adopted by Key Market Players
• Recent Developments in the Market
• Company Market Share Analysis, 2024
• Company Profiles of All Key Players
  • Company Details
  • Product Portfolio Analysis
  • Company's Segmental Share Analysis
  • Revenue Y-O-Y Comparison (2022-2024)

Key Company Profiles

• Dynacast International (USA)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Ryobi Die Casting (Japan)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Ahresty Corporation (Japan)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Sandhar Technologies (India)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Brillcast Manufacturing (USA)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Ningbo Die Casting Company (China)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Kinetic Die Casting Company (USA)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Form Technologies (Dynacast's parent) (USA)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Mino Industry Co., Ltd. (Japan)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Hitachi Metals, Ltd. (Japan)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Pace Industries (USA)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Shenzhen Runpeng Precision Hardware (China)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments

Conclusion & Recommendations