항공우주 및 방위 재료 시장 규모, 점유율, 성장 분석 : 재료별, 부품별, 용도별, 지역별 - 업계 예측(2026-2033년)

Aerospace and Defense Materials Market size was valued at USD 46.87 Billion in 2024 and is poised to grow from USD 50.19 Billion in 2025 to USD 86.75 Billion by 2033, growing at a CAGR of 7.08% during the forecast period (2026-2033).

The aerospace and defense materials market is primarily fueled by escalating defense budgets, heightened demand for commercial aircraft, and ongoing technological innovations that emphasize lightweight, high-performance materials. Geopolitical tensions necessitate the modernization of military assets, further driving expenditure in this sector. Concurrently, there is a marked trend towards developing sustainable and eco-friendly materials in response to rigorous environmental regulations and growing public scrutiny. Aerospace and defense manufacturers are increasingly utilizing bio-based materials, recyclable composites, and lightweight alloys to minimize carbon footprints. This shift not only aligns with sustainability objectives but also enhances cost-efficiency through improved fuel performance and lower maintenance needs, presenting substantial opportunities for growth within the market.

Top-down and bottom-up approaches were used to estimate and validate the size of the Aerospace and Defense Materials market and to estimate the size of various other dependent submarkets. The research methodology used to estimate the market size includes the following details: The key players in the market were identified through secondary research, and their market shares in the respective regions were determined through primary and secondary research. This entire procedure includes the study of the annual and financial reports of the top market players and extensive interviews for key insights from industry leaders such as CEOs, VPs, directors, and marketing executives. All percentage shares split, and breakdowns were determined using secondary sources and verified through Primary sources. All possible parameters that affect the markets covered in this research study have been accounted for, viewed in extensive detail, verified through primary research, and analyzed to get the final quantitative and qualitative data.

Aerospace and Defense Materials Market Segments Analysis

Global Aerospace and Defense Materials Market is segmented by material, parts, application and region. Based on material, the market is segmented into aluminum, titanium, composites, superalloys, steel, plastics and others. Based on parts, the market is segmented into aero structure, components, cabin interiors, propulsion system, equipment, system, & support, satellites and construction & insulation components. Based on application, the market is segmented into commercial, business & general aviation, military and others. Based on region, the market is segmented into North America, Europe, Asia Pacific, Latin America and Middle East & Africa.

Driver of the Aerospace and Defense Materials Market

The surge in global air passenger traffic is significantly boosting the demand for new aircraft, which in turn drives the necessity for advanced aerospace materials. This trend emphasizes the importance of enhancing fuel efficiency, minimizing emissions, and optimizing overall aircraft performance. Consequently, there is a growing adoption of lightweight materials such as composites in the manufacturing process of aircraft. These materials not only contribute to the reduction of weight but also help manufacturers meet stringent environmental regulations while improving the structural integrity and performance of the aircraft, thus transforming the aerospace and defense materials landscape.

Restraints in the Aerospace and Defense Materials Market

The aerospace and defense materials sector encounters significant challenges related to supply chain complexity, which arises from relying on multiple suppliers and adhering to rigorous quality control standards. Securing and managing dependable, high-quality materials, especially for niche applications, poses considerable difficulties. Any disruptions within the supply chain can adversely affect production timelines and inflate costs, making it vital for companies in this industry to cultivate and uphold a resilient and streamlined supply chain. Ensuring efficiency and reliability in material sourcing is essential for the sustained success and competitiveness of the aerospace and defense materials market.

Market Trends of the Aerospace and Defense Materials Market

The aerospace and defense materials market is witnessing a significant trend towards the adoption of advanced composite materials, which provide exceptional strength-to-weight ratios, corrosion resistance, and longevity. This shift is driven by the need for enhanced fuel efficiency and overall performance, as using composites in aircraft structures substantially reduces weight. Notable materials such as carbon fiber, fiberglass, and aramid fiber composites are increasingly favored across various applications, facilitating innovative designs and improving operational effectiveness. As manufacturers seek to optimize their offerings amidst rising sustainability concerns, the integration of these advanced materials is set to reshape the landscape of aerospace and defense.

Table of Contents

Introduction

• Objectives of the Study
• Scope of the Report
• Definitions

Research Methodology

• Information Procurement
• Secondary & Primary Data Methods
• Market Size Estimation
• Market Assumptions & Limitations

Executive Summary

• Global Market Outlook
• Supply & Demand Trend Analysis
• Segmental Opportunity Analysis

Market Dynamics & Outlook

• Market Overview
• Market Size
• Market Dynamics
  • Drivers & Opportunities
  • Restraints & Challenges
• Porters Analysis
  • Competitive rivalry
  • Threat of substitute
  • Bargaining power of buyers
  • Threat of new entrants
  • Bargaining power of suppliers

Key Market Insights

• Key Success Factors
• Degree of Competition
• Top Investment Pockets
• Market Ecosystem
• Market Attractiveness Index, 2025
• PESTEL Analysis
• Macro-Economic Indicators
• Value Chain Analysis
• Pricing Analysis

Global Aerospace and Defense Materials Market Size by Material & CAGR (2026-2033)

• Market Overview
• Aluminum
• Titanium
• Composites
• Superalloys
• Steel
• Plastics
• Others

Global Aerospace and Defense Materials Market Size by Parts & CAGR (2026-2033)

• Market Overview
• Aero Structure
• Components
• Cabin Interiors
• Propulsion System
• Equipment, System, & Support
• Satellites
• Construction & Insulation Components

Global Aerospace and Defense Materials Market Size by Application & CAGR (2026-2033)

• Market Overview
• Commercial
• Business & General Aviation
• Military
• Others

Global Aerospace and Defense Materials Market Size & CAGR (2026-2033)

• North America (Material, Parts, Application)
  • US
  • Canada
• Europe (Material, Parts, Application)
  • Germany
  • Spain
  • France
  • UK
  • Italy
  • Rest of Europe
• Asia Pacific (Material, Parts, Application)
  • China
  • India
  • Japan
  • South Korea
  • Rest of Asia-Pacific
• Latin America (Material, Parts, Application)
  • Brazil
  • Rest of Latin America
• Middle East & Africa (Material, Parts, Application)
  • GCC Countries
  • South Africa
  • Rest of Middle East & Africa

Competitive Intelligence

• Top 5 Player Comparison
• Market Positioning of Key Players, 2025
• Strategies Adopted by Key Market Players
• Recent Developments in the Market
• Company Market Share Analysis, 2025
• Company Profiles of All Key Players
  • Company Details
  • Product Portfolio Analysis
  • Company's Segmental Share Analysis
  • Revenue Y-O-Y Comparison (2021-2023)

Key Company Profiles

• Toray Industries, Inc. (Japan)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Solvay S.A. (Belgium)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• DuPont de Nemours, Inc. (USA)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Alcoa Corporation (USA)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Teijin Limited (Japan)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Allegheny Technologies Incorporated (USA)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Constellium SE (France)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Kobe Steel, Ltd. (Japan)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• AMG N.V. (Netherlands)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• NOVELIS (USA)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Hexcel Corporation (USA)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• VSMPO-AVISMA Corporation (Russia)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Mitsubishi Chemical Holdings Corporation (Japan)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• SGL Carbon (Germany)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Hyosung Advanced Materials (South Korea)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Arconic Corporation (USA)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• thyssenkrupp Aerospace Germany GmbH (Germany)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Carpenter Technology Corporation (USA)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Haynes International, Inc. (USA)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Materion Corporation (USA)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments

Conclusion & Recommendations