산업용 이더넷 스위치 : 시장 점유율 분석, 업계 동향 및 통계, 성장 예측(2026-2031년)

According to Mordor Intelligence, the industrial ethernet switch market size is expected to increase from USD 3.50 billion in 2025 to USD 3.80 billion in 2026 and reach USD 6.00 billion by 2031, growing at a CAGR of 8% over 2026-2031.

This report is Segmented by Management Type (Managed Switches, and Unmanaged Switches), Layer Capability (Layer 2, and Layer 3), Number of Ports (Up To 8 Ports, 9-24 Ports, 25-48 Ports, and More), Data Rate (≤100 Mbps, Gigabit Ethernet, 10 Gigabit Ethernet, and More), End-User Industry (Discrete Manufacturing, and More), and Geography. The Market Forecasts are Provided in Terms of Value (USD).

Global Industrial Ethernet Switch Market Trends and Insights

Rapid Expansion of IIoT Deployments

Industrial Internet of Things programs are multiplying Ethernet endpoints in production lines, with industrial Ethernet capturing 76% of new-node installations in 2025. Each smart sensor or edge appliance needs a switch port, and unmanaged daisy chains introduce latency that disrupts 10-50 millisecond control loops. Utilities illustrate the shift; Electricity North West installed rugged switches in United Kingdom substations to stream synchrophasor data at 50 frames per second, traffic that legacy serial links cannot manage. Switch makers now embed IEEE 1588 grandmaster clocks, eliminating standalone timing boxes and trimming bill of materials by roughly 15%. As plant operators see commissioning times fall, demand rises for ports with deterministic forwarding-an anchor trend for the Industrial Ethernet Switch Market.

Rising Demand for Deterministic Networking in Smart Factories

Automotive and semiconductor plants require sub-microsecond synchronization for collaborative robots and vision systems, achievable only with TSN-ready switches. Finalized IEEE 802.1Qbv and 802.1AS standards let devices reserve bandwidth for control traffic, while relegating diagnostics to best-effort queues. European automakers lead adoption after AUTOSAR named Ethernet the in-vehicle backbone in 2024. Siemens updated its SCALANCE XC-300 line in 2025 with IEEE 802.1Qci filtering, insulating networks from rogue traffic.Discrete manufacturers report that TSN shortens commissioning by 30-40%, confirming its pull on Industrial Ethernet Switch Market demand.

High Upfront CAPEX for Ruggedised Switches

Industrial-grade switches with extended temperature ratings and conformal coating cost 200-400% more than commercial gear. A Cisco Industrial Ethernet 5000 with 10 Gigabit uplinks lists at about USD 15,400 against USD 906.50 for an entry-level IE2000, and hazardous-location certifications add USD 500-1,000 per unit. Railway and oil-rig projects need EN 50155 or ATEX compliance, inflating budgets and delaying procurement. Leasing models aim to flatten spending, yet customers remain cautious because obsolescence risk reverts to the buyer if products are discontinued mid-term.

Other drivers and restraints analyzed in the detailed report include:

1. Migration from Fieldbus to Ethernet in Process Industries
2. Increasing Adoption of Power over Ethernet for Edge Devices
3. Lack of Skilled Industrial Networking Personnel

For complete list of drivers and restraints, kindly check the Table Of Contents.

Segment Analysis

Managed hardware captured 68.75% of the Industrial Ethernet Switch Market in 2025 and is set to rise at 11.31% CAGR through 2031. Regulatory mandates such as NIS2 oblige operators of essential services to segment networks and maintain audit trails, capabilities only managed devices offer. Process plants prioritize SNMP traps and syslog for centralized monitoring, while discrete lines still use unmanaged units when point-to-point links suffice. "Smart unmanaged" products with read-only dashboards blur boundaries, yet firmware-update requirements in forthcoming Cyber Resilience rules further tilt spending toward fully managed gear. Vendors embedding zero-trust access controls at the port level stand to gain share as end users elevate switches from connectivity devices to critical security assets.

Unmanaged switches retain footholds in machine-mounted clusters where configuration overhead outweighs visibility gains. Rockwell's Stratix 2100, introduced mid-2025, targets this niche with 5- and 8-port variants. However, as patching obligations expand, brownfield plants are replacing still-functional unmanaged units, enlarging the addressable pool for managed platforms and supporting long-run growth of the Industrial Ethernet Switch Market size for this segment.

Layer 2 products held 61.40% share in 2025, yet Layer 3 switches are advancing at 11.76% CAGR as edge computers need inter-VLAN routing for micro-segments. Utilities adopt Layer 3 to carry routed GOOSE messages per IEC 61850 Edition 2.1, letting substations exchange status across wide territories without multicast flooding. Belden's XTran line, launched in 2025, exemplifies the trend by combining routed GOOSE with MPLS and SD-WAN.

Cost barriers are falling; Broadcom and Marvell chips trimmed 20% since 2024, shrinking the premium between Layer 2 and Layer 3 products. As discrete manufacturers isolate production zones with ACLs on-box, Layer 3 becomes the default upgrade path, boosting the Industrial Ethernet Switch Market size for routing-capable hardware and narrowing appeal for pure Layer 2 devices.

Geography Analysis

Asia-Pacific led the Industrial Ethernet Switch Market with 35.12% share in 2025 and is projected to post a 9.89% CAGR to 2031. India's automation sector is set to climb from USD 3.64 billion in 2026 to USD 13.65 billion by 2034, fueling switch purchases in greenfield factories. China's EV and semiconductor clusters require TSN-capable gear for +-1 microsecond sync, while Japanese machine-tool builders embed 10 Gigabit switches inside CNC controllers, trimming cabinet footprints by 30%. South Korean shipyards deploy marine-rated fiber backbones to replace proprietary serial lines, and Australian utilities migrate to IEC 61850 Edition 2.1 Layer 3 architectures. Regional labor cost advantages shorten payback periods despite rugged-hardware premiums, and government smart-manufacturing incentives pull forward replacement cycles.

North America holds a strong position, buoyed by reshoring that expands automotive and medical-device capacity. The U.S. CISA's 2025 guidance on network segmentation compels utilities and transit agencies to retire unmanaged equipment. CenterPoint Energy's 2025 pipeline backbone cut OPEX by 25% after converging leak-detection telemetry on Ethernet. Canadian mines deploy Class I Division 1 switches tolerant to -40 °C, and Mexican tier-1 suppliers wait 20 weeks for TSN-certified hardware amid ASIC shortages. The region confronts a deep skills shortage, extending median hiring to 120 days and nudging buyers to cloud-managed devices.

Europe commands substantial share thanks to automotive and chemical producers enforcing TSN. NIS2, effective October 2024, pushes managed switches in utilities, transit, and health care. Germany's Industry 4.0 drive accelerates OPC UA over TSN adoption, with Beckhoff embedding switch fabrics inside control platforms. Electricity North West connected phasor meters via rugged hardware in 2025, and France's railways standardize on EN 50155 devices with 20 millisecond ring recovery. Lead times for 28-65 nm ASICs top 30 weeks in 2026, spotlighting supply-chain constraints even as smart-grid and factory-modernization budgets expand across Italy and Spain.

1. Siemens AG
2. Schneider Electric SE
3. Rockwell Automation, Inc.
4. Belden Inc.
5. Moxa Inc.
6. Advantech Co., Ltd.
7. Phoenix Contact GmbH & Co. KG
8. Hirschmann Automation and Control GmbH
9. Cisco Systems, Inc.
10. Eaton Corporation plc
11. ABB Ltd.
12. B+B SmartWorx Inc.
13. Red Lion Controls, Inc.
14. Westermo Network Technologies AB
15. Beckhoff Automation GmbH & Co. KG
16. PLANET Technology Corporation
17. Rittal GmbH & Co. KG
18. Kyland Technology Co., Ltd.
19. RuggedCom Inc.
20. Xiamen Korenix Technology Co., Ltd.

Additional Benefits:

• The market estimate (ME) sheet in Excel format
• 3 months of analyst support

TABLE OF CONTENTS

1 INTRODUCTION

• 1.1 Study Assumptions and Market Definition
• 1.2 Scope of the Study

2 RESEARCH METHODOLOGY

3 EXECUTIVE SUMMARY

4 MARKET LANDSCAPE

• 4.1 Market Drivers
  • 4.1.1 Rapid Expansion of IIoT Deployments
  • 4.1.2 Rising Demand for Deterministic Networking in Smart Factories
  • 4.1.3 Migration from Fieldbus to Ethernet in Process Industries
  • 4.1.4 Increasing Adoption of Power over Ethernet for Edge Devices
  • 4.1.5 Compliance Requirements for Time-Sensitive Networking (TSN)
  • 4.1.6 Surge in Cyber-Physical Security Investments Post-2025
• 4.2 Market Restraints
  • 4.2.1 High Upfront CAPEX for Ruggedised Switches
  • 4.2.2 Lack of Skilled Industrial Networking Personnel
  • 4.2.3 Legacy Equipment Integration Challenges
  • 4.2.4 Supply Chain Volatility of Specialized ASICs
• 4.3 Supply-Chain Analysis
• 4.4 Regulatory Landscape
• 4.5 Technological Outlook
• 4.6 Porter's Five Forces Analysis
  • 4.6.1 Threat of New Entrants
  • 4.6.2 Bargaining Power of Buyers
  • 4.6.3 Bargaining Power of Suppliers
  • 4.6.4 Threat of Substitutes
  • 4.6.5 Competitive Rivalry
• 4.7 Impact of Macroeconomic Factors on the Market

5 MARKET SIZE AND GROWTH FORECASTS (VALUE)

• 5.1 By Management Type
  • 5.1.1 Managed Switches
  • 5.1.2 Unmanaged Switches
• 5.2 By Layer Capability
  • 5.2.1 Layer 2
  • 5.2.2 Layer 3
• 5.3 By Number of Ports
  • 5.3.1 Up to 8 Ports
  • 5.3.2 9-24 Ports
  • 5.3.3 25-48 Ports
  • 5.3.4 More than 48 Ports
• 5.4 By Data Rate
  • 5.4.1 <=100 Mbps
  • 5.4.2 Gigabit Ethernet
  • 5.4.3 10 Gigabit Ethernet
  • 5.4.4 40 Gigabit and Above
• 5.5 By End-User Industry
  • 5.5.1 Discrete Manufacturing
  • 5.5.2 Process Industries
  • 5.5.3 Transportation and Logistics
  • 5.5.4 Energy and Utilities
  • 5.5.5 Government and Smart Cities
  • 5.5.6 Other End-User Industries
• 5.6 By Geography
  • 5.6.1 North America
    • 5.6.1.1 United States
    • 5.6.1.2 Canada
    • 5.6.1.3 Mexico
  • 5.6.2 South America
    • 5.6.2.1 Brazil
    • 5.6.2.2 Argentina
    • 5.6.2.3 Rest of South America
  • 5.6.3 Europe
    • 5.6.3.1 Germany
    • 5.6.3.2 France
    • 5.6.3.3 United Kingdom
    • 5.6.3.4 Italy
    • 5.6.3.5 Spain
    • 5.6.3.6 Rest of Europe
  • 5.6.4 Asia-Pacific
    • 5.6.4.1 China
    • 5.6.4.2 Japan
    • 5.6.4.3 India
    • 5.6.4.4 South Korea
    • 5.6.4.5 Australia and New Zealand
    • 5.6.4.6 Rest of Asia-Pacific
  • 5.6.5 Middle East
    • 5.6.5.1 Saudi Arabia
    • 5.6.5.2 United Arab Emirates
    • 5.6.5.3 Rest of Middle East
  • 5.6.6 Africa
    • 5.6.6.1 South Africa
    • 5.6.6.2 Nigeria
    • 5.6.6.3 Rest of Africa

6 COMPETITIVE LANDSCAPE

• 6.1 Market Concentration
• 6.2 Strategic Moves
• 6.3 Market Share Analysis
• 6.4 Company Profiles (includes Global Level Overview, Market Level Overview, Core Segments, Financials as available, Strategic Information, Market Rank/Share, Products and Services, Recent Developments)
  • 6.4.1 Siemens AG
  • 6.4.2 Schneider Electric SE
  • 6.4.3 Rockwell Automation, Inc.
  • 6.4.4 Belden Inc.
  • 6.4.5 Moxa Inc.
  • 6.4.6 Advantech Co., Ltd.
  • 6.4.7 Phoenix Contact GmbH & Co. KG
  • 6.4.8 Hirschmann Automation and Control GmbH
  • 6.4.9 Cisco Systems, Inc.
  • 6.4.10 Eaton Corporation plc
  • 6.4.11 ABB Ltd.
  • 6.4.12 B+B SmartWorx Inc.
  • 6.4.13 Red Lion Controls, Inc.
  • 6.4.14 Westermo Network Technologies AB
  • 6.4.15 Beckhoff Automation GmbH & Co. KG
  • 6.4.16 PLANET Technology Corporation
  • 6.4.17 Rittal GmbH & Co. KG
  • 6.4.18 Kyland Technology Co., Ltd.
  • 6.4.19 RuggedCom Inc.
  • 6.4.20 Xiamen Korenix Technology Co., Ltd.

7 MARKET OPPORTUNITIES AND FUTURE OUTLOOK

• 7.1 White-Space and Unmet-Need Assessment